Can I create and use more than one repository on OVM 2.1.5

The version of Oracle VM I am using is 2.1.5 .
I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
I know in Oracle VM 2.2 we can use following commands to realize that.
a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
c. #/opt/ovs-agent-2.3/utils/repos.py –i
And other repositories can also be mounted and found under /var/ovs/mount/UUID.
But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
At first, I create a repository using mpath1p1:
a. # mkfs.ocfs2 /dev/mapper/mpath1p1
b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
c. I can find the repository has been mounted under /OVS.
But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
"# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
After reboot, only repository with mpath1p1 was mounted under OVS.
Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
Thank you very much.

Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

Similar Messages

Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

You can only connect to one device at a time using Bluetooth, See article below for more information.
http://support.apple.com/kb/ht1664
While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

Can i create report using more than one Business Area ?

Hi Gurus,
Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
Vikram

You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
Matt Topper
TUSC, The Oracle Experts
[email protected]

Can an assigned PO use more than one work order?

Can an assigned PO use more than one work order?

Hi,
Please avoid duplicate posting in the forum. You already an active thread which is in progress. there is possibility that Moderators might lock your threads.
Thanks,
Sudhakar
Message was edited by: Sudhakar Pappu
Next time please mark for moderation so duplicates can be removed - thanks I have locked this thread
Regards
Virendra
Message was edited by: Virendra Pal

Can't search photos using more than one word. Ruined ability to data base

I've spent hundreds of hours cataloging my photos by keywords and image titles and created a data base that is critical to my business. After installing iPhoto 11 I can no longer search using multiple words. This has made my data base useless. The "Faces" and "Places" fields will not help because those are not part of the search criteria. Is there a way to make this work? If not how do I go back to the old version of iPhoto?
thanks for your help!

How were you searching previously? Adding both keywords and title text to the search box? Why can't a smart album do the trick?
You might consider using a DAM (digital asset management) application like Expression Media. It's a professional grade image management app that can be searched for any combination of keywords, description text, title text, etc.
Click to view full size
You can learn about EM and the other pro DAM apps at the The DAM Forum. I strongly suggest you consider a more robust DAM app for your professional work.

Publishing more than one site and using more than one computer

I did my sons website in iWeb on my laptop using my own .mac account to publish it. Now I've up graded to a family account, giving my son his own settings etc. I've done my own website now, but when I publish to either mine or his .mac account it seems to go through the process of publishing both sites.
I've also set my son up as a separate user account on my laptop. Can I move his iweb settings so that he can do his website in iweb without seeing mine. I've noticed there's no import function, but surely I could move a folder to a location in his library that will load into iweb. This would be useful because I'd also like to update my own site from the laptop at home and my imac in the office.

Hi Smartmart,
I'd like you to have a look at[this page|http://alyeska.altervista.org/en/iWebTransferSite.html]
The only thing that changes is you put it to another user account on the same computer and not to another computer but the procedure is the same. When you move it by using a USB stick or CD or whatever you will then have the domain file on both the accounts. They are now completely independent from each other. So when you make a change to one site it will be saved only to that Domain file and not to the other.
The two websites (yours and your son's website) are now in one Domain file. What you then have to do is, once you have it on both user accounts, delete your website in your son's account and his in yours. The rest will be preserved.
Regards,
Cédric
Actually it's quite the same you already posted... I was a bit too slow

US iPad 3G and using more than one micro-sim

Hello
I'm planning on ordering a 3G iPad from the US. I travel very regularly and plan on having micro-sim cards for the countries I visit all the time i.e France, UK, Germany and others. Obviously it would be a lot cheaper to have separate sim cards for each country as opposed to roaming on a single subscription.
My question is whether any micro-sim will work in the US iPad 3G straight out of the box. I'll have absolutely no need for the AT&T sim.
Thanks

This post is a little dated, but, as long as I'm here: I just got back from Canada, where I was able to do exactly this: I went into a Bell store in Vancouver and got a microSIM for my 3G iPad 2 ($5). We took my AT&T SIM out and put the Bell SIM in, and it worked exactly the way it should have: I went to "Cellular Data" in Settings and it let me sign up for a variety of month-to-month plans; I went for 5 GB of service for $35. The only thing I had to work around was that the sign-up form wouldn't accept "CA" as a Canadian province; I substituted "BC", and it was happy. The service worked great, and was much cheaper than AT&T's international data roaming plan.
I presume I could go back to Canada and re-use the SIM to purchase a new plan, but I'm not sure how long that would work -- do SIMs (and their phone numbers) used in this way time out after awhile?
To perhaps extend the discussion a bit: I'm going to be in France and the UK in July, and would like to do the same sort of thing, ideally getting one microSIM and service plan that would work in both countries. Orange provides service in France and the UK, but I'm not sure if a service plan bought in France would continue to work in the UK. Any advice?

Can we use more than one Help Provider class in a same project in ADF11g

Hi All,
There are two help providers i want to use .They are "ResourceBundleHelpProvider","OHW Help Provider"
In adf-settings.xml file
<help-provider>
<help-provider-class>oracle.adf.view.rich.help.ResourceBundleHelpProvider</help-provider-class>
<property>
<property-name>baseName</property-name>
<value>com.symmetry.dashboard.panels.Help</value>
</property>
</help-provider>
if try to register both help providers confliction occurs. Is it possible to register and use more than one help provider.?
Thanks in advance.:)

Thanks Frank,
In adf-settings.xml file
<help-provider>
<help-provider-class>oracle.adf.view.rich.help.ResourceBundleHelpProvider</help-provider-class>
<property>
<property-name>baseName</property-name>
<value>com.symmetry.dashboard.panels.Help</value>
</property>
</help-provider>
<help-provider prefix="RB_">
<help-provider-class>oracle.help.web.rich.helpProvider.OHWHelpProvider</help-provider-class>
<property>
<property-name>ohwConfigFileURL</property-name>
<value>/myHelpset/config.xml</value>
</property>
<property>
<property-name>baseURI</property-name>
<value>http://127.0.0.1:7101/Dashboard_workflow/myHelpset/%3c/value>
</property>
</help-provider>
I differentiated the help providers with the "prefix" attribute in the <help-provider> tag. So now confliction is not occuring between those.
I used this prefix in the "helpTopicId" property of the adf components like "input text box" . I got the result. :)

How to select and copy more than one field in SMARTFORMS

Hello, I have about 60 fields in my smartforms, I need to copy them and paste once more at the same page. There is a problem, I can not select and copy more than one field. Is there some trick to copy and paste more than one element simultanicly?

Hi,
There is no way to copy multiple elements in smartform.
you have to do one by one only

Can u use more than one apple account on your device and itunes

Can u use more than one apple account on your device and itunes

Yes, but you have to logout of one, and login to the other.
If it is an iPhone/iPad/iPod Touch and you buy apps on different accounts, when it comes time to update an app, you have to specify the password for the account used to acquirer the app. You change an iOS account via Settings -> Store -> Apple ID (tap on it), and start by logging out and then you can enter the other Id
So it is possible, but it can also be a pain.

Can I use more than one transition when creating a slideshow in IDVD

I want to use more than one transition in IDVD when creating a slideshow, is this possible?

Not so. Under Windows select Photos.
That will show the Media Browser in the lower right hand corner of iMovie.
Use the File ➙ New Project to create a new project. Select the photos from iPhoto you want to create a movie from and drag into the new project area.
From there add your transitions, music, etc.

Can I use more than one version of Adobe Reader on an iPad, 8.1 touch and 11.1

Can I use more than one version of Adobe Reader on an iPad adobe Reader Touch and Reader 11.1 . . I use Acrobat XI Pro although I had some old files that were stored on adobe.com from a prior version of acrobat 9 student edition.
I guess the same question for my Surface Pro2 Computer might apply, although I gather from what I read that you shouldn't have two versions of reader on a computer.

If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

I use more than one desktop to edit. Can I access photoshop and lightroom from any of them, or only from the desktop onto which I have download Creative Cloud?

I use more than one desktop to edit. Can I access Creative Cloud Photoshop and Lightroom from any of them to edit, or only from the desktop onto which I have download Creative Cloud?

Divindino you can activate Photoshop and Lightroom on up to two computers. You can find more details at Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

I keep my library on an external hard drive 4TB. It's full. Can I use more than one hard drive to keep my library on?

I keep my iTunes library on an external hard drive 4TB. It's full. Can I use more than one hard drive to keep my library on? Like two 4TB next to each other.

Create a concatenated disk set
Increase storage space with a concatenated RAID set (also called “Just a Bunch of Disks” or JBOD). If you need one large disk, but you have only several smaller disks, you can create a concatenated disk set to use several small disks as one large disk.
Open Disk Utility, in the Utilities folder in Launchpad.
Select one of the disks that you want in the set, and then click RAID.
Click Add (+), and type a name for the RAID set.
Choose a format from the Format pop-up menu. Usually you’ll choose the Mac OS Extended (Journaled) format.
Choose Concatenated Disk Set from the RAID Type pop-up menu.
Drag the disks you want to add to the set to the list on the right.
Click Create.
Exerpt from:
Disk Utility 12.x: Create a RAID set - Apple - Support
Note that the biggest CON to concatenated RAID configurations is vulnerability to volume failure. If either disk fails, the whole volume fails. If you choose this option, I would highly recommend backing up your music to a cloud service. There are very cheap per GB/storage, and some of the most reputable actually offer unlimited storage:
Five Best Cloud Storage Providers - Lifehacker

Can I create and use more than one repository on OVM 2.1.5

Similar Messages

Maybe you are looking for