Can I target the STM32 Primer2 hardware with LabVIEW for ARM

The STM32 Primer2 hardware looks very cool.  Can LabVIEW for Arm target this hardware?  From looking at the list of ARM devices supported by LabVIEW, this would appears to be a Tier 2 device (ARM Cortex-M3) with no support for TCP/IP or IO.
Can anyone tell me the feasibility or effort required to get TCP/IP, IO, and maybe even display support for this device? 
Message Edited by Jim Kring on 09-11-2009 10:46 AM

Have you ever said something you wish you could take back after having time to reflect upon it?  Another forum I like, http://newsbusters.org lets the author edit his posts for a short time.  Maybe NI could to that and I would not be pulling out my foot so often.
Well, perhaps I was a bit more "colorful" than I meant to be.  Frustration does that to me sometimes.  Still the idea of a strong rope covered with disgusting risks does get the point across magnificently.  I just wish I had saved it for something more suitable.
Let me think back to some of the problems I've had in which I've lost hours trying to figure out...
1.  Can't use the Wait ms function.  It halts the program.  Express wait works fine.  It was sprinkled throughout which made it hard to isolate.
2.  Some sub VIs don't run unless they are checked as inline code.  I don't yet understand why.
3.  At the beginning of my main vi there was a small cluster in which I filled the data from an SD card file.  I used a constant of the cluster on the input of the Bundle function, but because my program and variable sizes were near the max I changed a number of variable representations to save memory.  ...But I didn't replace the constant.  The program started exhibiting really strange behaviors.  I couldn't even get a simple state machine to run.  I was reduced to commenting out (disable structure) sections to find the problem before noticing the coercion dot on the input to the bundle (The dot against the red string color doesn't stand out very strongly which is why I missed it).  Apparently it overwrote memory since the older cluster was significantly larger than the new.
4.  Spent a lot of time trying to get the SD card to work with SPI functions.  Even though I read that 2009 supported SD card file services I didn't intuitively understand how to wire up since the Open/Create/Replace function has a ref num output which actually connects to the file(use dialog) input of the read and write functions.
5.  Had a problem with breakpoints and probes not working.  That apparently was caused by item #3.
6.  Typo bug in the Arm_irq.c file  LM3Sxxxx_GPIOCAHandlerP to LM3Sxxxx_GPIOCHandlerP
Some of these are of the rope variety. A few are actual bugs.  All probably could have been solved in moments had I a local guru.  Anyway, I've spent hours and my hands hurt.  I hope to have this little project working on the LM3s8962 today and after some hardware changes will port it over to the Primer2... Hopefully...
This forum has been a real help... especially your quick responses.
regards to all,
David 

Similar Messages

  • Accessing Onboard ADC with LabVIEW for ARM

    I am working with the LM3S9062 Evaluation board and LabView for ARM system, and want to measure an analog voltage using the ADC, however I cannot determine which of the Digital Inputs is linked to the ADC. I need to know how the gpio mapping corresponds to the pinout of the Device.  Any thoughts?

    Do you mean the LM3s8962 evaluation board?  If so, the pins should be labeled accordingly on the board - ADC0, ADC1, ADC2, etc.
    Drop an EIO node with the same name as the pin and it should work fine from there.
    Here are the schamtics :  http://www.realview.com.cn/UploadFile/2008111510295067433.pdf

  • How can I calculate the number of members with data for a given Dimension

    HiI want to be able to calculate the exact size of the data given the number of blocks in existence.I am trying to work out a way of estimating the effect of changing Dimensions from Spare to Dense and to see which Dimensions would be worth it.Currently I have Cost Centre and Reference Code dimensions. I know that roughly 90% of the Cost Centres are used against just one member of Reference Codes but the other 10% are against multiple Reference Codes.I also have a number of other dimensions and the problem I come up against is that when I change a Dimension from Sparse I really don't know how many blocks will be in existence at the end of it so I can't multiply this against the blocksize to predict the total datasize.Any thoughts (the artistic "suck it and see" solution is obvious but I'd like to cut down on experiments - they take too long)Thanks

    You can do it manually if you like with code in the Error Console.
    Copy and paste the code in the Code field in the Error Console and click the Evaluate button.
    *Firefox/Tools > Web Development > Error Console (Shift+CtrL+J)
    See http://kb.mozillazine.org/User:Dickvl/JavaScript_Error_Console#Expire_History_By_Days

  • Error ! ADC with LabVIEW for ARM

    I cannot get the wave Amplitude and frequency? I don't know how to use ADC !
    thanks！

    Do you mean the LM3s8962 evaluation board?  If so, the pins should be labeled accordingly on the board - ADC0, ADC1, ADC2, etc.
    Drop an EIO node with the same name as the pin and it should work fine from there.
    Here are the schamtics :  http://www.realview.com.cn/UploadFile/2008111510295067433.pdf

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • Can I use the Creative Cloud libraries with Illustrator CS5

    Can I use the Creative Cloud libraries with Illustrator CS5

    Hi Ilys Ravel,
    No, Creative Cloud Libraries feature is only available in CC 2014.1 release on-wards.
    Sanjay..

  • How can I change the email address associated with my iCloud account?Ask your question.

    How can I change the email address associated with my iCloud account?

    sschultz365 wrote:
    When my iPhone updated, it reloaded an old email address as my iCloud address and I don't know the password associated with that email address.  How do I delete the old account and set up a new one with my new email?
    To change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How can I change the email address associated with my iCloud account?

    How can I change the email address associated with my iCloud account? Somehow, accidentally have my wife's email address on my iCloud account and on hers as well.

    iCloud FAQ
    http://support.apple.com/kb/HT4436

  • How can I change the Apple ID associated with my iCloud account? I changed it in my itunes but the old id is still hijacking my icloud!

    how can I change the Apple ID associated with my iCloud account? I changed it in my itunes but the old id is still hijacking my icloud!

    Hello pscorning1,
    I apologize, I'm a bit unclear on the exact nature of your question. If you have already changed the information associated with your current Apple ID (*not* created an entirely new Apple ID), you may find the following article about updating the various Apple ID services helpful:
    What to do after you change your Apple ID email address or password - Apple Support
    Sincerely,
    - Brenden

  • I can't update the purchases I made with the old Apple I.D. How can I sync my old Apple I.D. with new one?

    I can't update the purchases I made with the old Apple I.D;
    how can I sync my old Apple I.D. with new one?

    Only the Apple ID used to buy an app can update an app. Apple does not merge Apple IDs and Apple does not transfer content biught with one ID to another ID.

  • Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?

    Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?  I am on Telus mobility with my iphone 4s.

    See the answer on the same question you asked a few minutes ago.

  • I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    Remember security on a TC is an illusion.
    Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
    Remember this the next time because anybody at all can change your passwords.
    Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
    Voila .. all your passwords in plain sight to any Tom Dick and Fred.

  • Can I hide the Adobe Reader panel with "Export, Create and Edit PDF and Send and Store Files"? I don't use it and it takes up space

    Can I hide the Adobe Reader panel with "Export, Create and Edit PDF and Send and Store Files"? I don't use it and it takes up space

    If you just mean, can I close it, sure. In Reader XI click the Tools button to close or reopen it.

  • When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it

    When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?

    The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Can we enhance the Sender SOAP Adapter with our own modules?

    Hi All,
    Can we enhance the Sender SOAP Adapter with our own modules on the Module Tab Page in the Module Processor?
    I believe the answer is no. However, whatever may be the answer, I would like to know that is there any specific reason for that.
    Please help me in this regard.
    Thanks,
    Yogi.

    Hi,
    I think, we are mentioning the URL of the adapter channel directly in the configuration. SO there is no place we can customize this flow..just a thought
    Because in the file adapter etc, After Adapter Engine picks up the data and before it goes into integration engine module is processed..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
    Rgds,
    Moorthy

Maybe you are looking for