Can I use my iphone5 to create a hotspot and then connect a device that requires a ethernet cable to a lan(router) this router obviously needs to use my hotspot to connect?

I need to setup Solar inverters remotely some times and I am looking to see if there is a way to use my iphone to connect the inverter to the internet.  My thought is to create a hotspot and then connect the inverter to a router(it has a ethernet cable that can plug into a lan)  The router is then connected to my iphone.  So something similar than a dongle I suppose?

If you're wanting to share your hot spot with a device that requires an Ethernet connection, you need a device that can connect to Wi-Fi while providing access to that connection via Ethernet.  One idea might be to configure an AirPort Express to serve as a Wi-Fi extender of your hot spot, and plug the solar inverter to the Ethernet port on the Express.

Similar Messages

  • Can I work with localhost to create PHP pages and then use DW to upload them

    Problem solved
    Kevin

    If you have movement on the stills you can set up expressions based on in and out points. That's what I do. I then drop all my stills in order into a comp then set the out point for all stills for the longest duration. I then set group colors for layers that I want to make different lengths, do a group select and then adjust the out points for those layers. When I'm done I sequence the layers using the keyframe assistant.
    The other way I work is to use an audio track with markers for timing. I have an expression that reads the markers and sets opacity for the layers based on pairs of markers. The motion is also controlled by expressions. That's an even faster way to set up an animated slide show.
    The last way I work is just to set in an out points for all layers, sequence the layers, use expressions to do the motion and then use time remapping on a pre-comp to adjust the timing of the slide show. All methods are quick and easy.
    Here's a fly in bounce and then drop out fxx preset that will give you an idea of how expressions based on in and out point work for slide shows. You just drag the layer to it's resting position, apply the animatiokn preset and the layer flys in, bounces, and then drops out the bottom of the comp. Works in 2D and 3D space.

  • We downloaded a movie two nights ago but did not watch it.  Now we want to see the movie. It can't find it.  We tried logging out and then back in but that didn't help.  When I check downloads it shows nothing.

    Where do the rented movies go when we download one?  I downloaded one a few evenings ago, didn't watch it then, but now when I tried to find it, I could not. 

    Contact iTunes Store support if it doesn't resolve.
    In Settings there's a check for rentals option somewhere.

  • I use MB pro with Lion OSX 10.7.5 and Now I have bought MB Air with Mountain Lion,Can I transfer my MB Pro stuff running Lion to MB air running Mountain Lion or do I need to buy Mountain Lion for my Pro to create a backup and then transfer ,thnx

    I use MB pro running Lion OSX 10.7.5 and Now I have bought MB Air with Mountain Lion,Can I transfer my MB Pro stuff running Lion to MB air running Mountain Lion or do I need to buy Mountain Lion for my Pro and create a backup and then transfer ,Although I want Mountain Lion for my MB Pro but can I use the one from MB Air,thnx?

    Hello,
    If you just do a normal time machine backup on your macbook pro and then plug that harddrive into your new air; you should be able to just use migration assistant to transfer all your files. You wouldnt need to upgrade to mountain lion on your macbook pro.
    Hope it helps,
    Ryan

  • Hello, may I buy iphone5s in Apple's official website, but the order was cancelled, what time would be able to resume my credit card, I need to use my credit card now, you don't give me back the amount of credit card, I can't use my credit card.

    Hello, may I buy iphone5s in Apple's official website, but the order was cancelled, what time would be able to resume my credit card, I need to use my credit card now, you don't give me back the amount of credit card, I can't use my credit card.

    You are not addressing Apple here. We are users like you.
    Contact Apple: http://www.apple.com/contact/

  • I am triying to manually add files to my iphone and dont let me. When I check mark on manually manage box on itunes and then apply, itunes said that I already synced my iphone in other computer.  I never had use another itunes to synced my iphone. How can

    I am triying to manually add files to my iphone and dont let me. When I check mark on manually manage box on itunes and then apply, itunes said that I already synced my iphone in other computer.  I never had use another itunes to synced my iphone.
    How can I solve these stupid restrictions?

    Where are iTunes files located?
    No, I do not mean just the music.  Copying just the media/music files or the media folder creates problems.

  • Can I save a keynote presentation in Power Point and then use the power point on my Macbook?

    My library has a Toshiba TW 650 projector that is used by PCs. I am going to be giving a presentation created on Keynote.
    My DVI-VGA connector did not work for my 2009 Macbook to the projector. Can I sve the Keynote presentation to power point and then
    show the presentation on a PC with the Power Point version?

    Hello redffox,
    You can export the project to a .PPT file as outlined here: Keynote '09: Creating a PowerPoint slideshow http://support.apple.com/kb/ht3698
    To create a PowerPoint slideshow:
    Choose Share > Export, click PPT (PowerPoint) and then click Next.
    Type a name and choose a location for the file, and then click Export.
    Additional Information
    Note: PowerPoint doesn’t support some Keynote features:
    Some bulleted text items may be lost. If you hide the bulleted text on a slide (by deselecting Body in the Slide inspector), it is deleted from the outline when you export.
    PowerPoint doesn’t support alpha-channel graphics, so if you use a photo cutout frame, the image behind it will appear in front. You may also notice slight variations in other graphics.
    Cheers,
    Sterling

  • I tring to create new agent and then checking test connection it will show

    i tring to create new agent and then checking test connection it will show error like below plz help us
    oracle.odi.runtime.agent.invocation.InvocationException: ODI-1424: Agent host or port cannot be reached using http://localhost:29010/oraclediagent.
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.reThrowAgentErrorAsInvocation(RemoteRuntimeAgentInvoker.java:932)
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:291)
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invokeIsAlive(RemoteRuntimeAgentInvoker.java:427)
         at oracle.odi.ui.action.SnpsPopupActionTestAgentHandler.actionPerformed(SnpsPopupActionTestAgentHandler.java:65)
         at oracle.odi.ui.SnpsActionControler.handleEvent(SnpsActionControler.java:75)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:884)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2475)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    after using this link it will show error like below plz help
    C:\oracle\Middleware\Oracle_ODI1\oracledi\agent\bin>agent -NAME=OracleDIAgent
    OracleDI: Starting Agent ...
    2011-03-28 19:14:12.930 ERROR ODI-1131 Agent OracleDIAgent encountered an error:
    ODI-1400: Agent OracleDIAgent start failure: JDBC connection error occurs while
    connecting to the master repository.
    ODI-1441: Unable to connect to the master repository at JBDC URL=jdbc:oracle:thi
    n:@01hw175334.india.tcs.com:1521:orcl with USER=sh.
    Caused By: java.sql.SQLException: Exception occurred while getting connection: o
    racle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasourc
    e
    at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:
    541)
    at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceIm
    pl.java:587)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
    ava:668)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
    ava:613)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
    ava:607)
    at oracle.odi.Agent.validateConnectionProperties(Agent.java:398)
    at oracle.odi.Agent.doGetDataSource(Agent.java:390)
    at oracle.odi.Agent.main(Agent.java:471)
    Caused by: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection fr
    om Datasource
    at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(U
    CPErrorHandler.java:421)
    at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(U
    CPErrorHandler.java:389)
    at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection(Drive
    rConnectionFactoryAdapter.java:133)
    at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPool
    Internal.createOnePooledConnectionInternal(UniversalConnectionPoolImpl.java:1570
    at oracle.ucp.common.UniversalConnectionPoolImpl$UniversalConnectionPool
    Internal.access$600(UniversalConnectionPoolImpl.java:1378)
    at oracle.ucp.common.UniversalConnectionPoolImpl.createOnePooledConnecti
    on(UniversalConnectionPoolImpl.java:445)
    at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnectionWithout
    CountingRequests(UniversalConnectionPoolImpl.java:302)
    at oracle.ucp.common.UniversalConnectionPoolImpl.borrowConnection(Univer
    salConnectionPoolImpl.java:129)
    at oracle.ucp.jdbc.JDBCConnectionPool.borrowConnection(JDBCConnectionPoo
    l.java:119)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
    ava:655)
    ... 5 more
    Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon de
    nied
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.ja
    va:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:1
    33)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :206)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:406)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:399)
    at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthentica
    te.java:799)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:368)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    508)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:33)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
    at oracle.ucp.jdbc.DriverConnectionFactoryAdapter.createConnection(Drive
    rConnectionFactoryAdapter.java:129)
    ... 12 more
    C:\oracle\Middleware\Oracle_ODI1\oracledi\agent\bin>

  • How do I use time capsule as a direct backup drive only connect to my macbook pro via ethernet cable

    I have recently abandoned my cable internet service provider and am using my iPad as a hotspot via verizon wireless service.  I am trying to reconfigure my time capsule as a back up drive only connected by an ethernet cable. 
    I was able to set it up on my new hotspot wireless net, but do not want to use it that way because of the data usage impact on my verizon wireless account.
    Hopefully there is an easy answer, but it is not intuitively obvious to me. 

    Well I have to say you can do it.. but if you are plugging and unplugging ethernet, you could just as easily plug and unplug an external USB drive.. and it will be faster and more reliable than the TC.
    I explained how to do the TC as a secondary network in the posts here. Look down the bottom of the discussion.
    https://discussions.apple.com/thread/4817218?tstart=30
    If any of that doesn't make sense just post again here..
    You can also do it with wireless if you accept using a USB wireless stick plugged into the Mac.. then you have two wireless clients and can connect simultaneously to two different networks.. using the same principles as above that you remove the gateway and dns problems that arise by manual settings.

  • I still have 5 Gb icloud storage but 2.1 gb on iphone I want to upgrade to 6.0 but need 2.6 gb on my phone can i use icloud to free up some space and still access the apps that I store there on my iphone

    i still have 5 Gb icloud storage but 2.1 gb on iphone I want to upgrade to 6.0 but need 2.6 gb on my phone can i use icloud to free up some space and still access the apps that I store there on my iphone.

    No.
    You need to delete content from your iphone.

  • I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed. How can I upgrade my OS to 10.6 or better?

    I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?

    You have to understand the difference between an Update and an Upgrade.
    An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
    An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
    10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
    10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
    10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
    10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
    10.9 Mavericks is pure 64 bit and is a free download from the App store.
    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
      Some features require a compatible internet service provider: fees may apply.

  • How can I get my iPod touch music in computer and then to my iPhone. My computer was stolen so I will be using another computer

    How can I get my iPod touch music in computer and then to my iPhone. My computer was stolen so I will be using another computer

    Start Here:
    http://www.apple.com/support/ipodtouch/assistant/itunes/
    And See Here:
    http://www.apple.com/support/ipodtouch/

  • Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

    hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

    If what doesn't work?
    If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
    You can then do any of several things:
    1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
    2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
    If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
    3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
    If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

  • I have created a pdf and then want to send it to my boss.  When he recieves it it is saved in the 14 X 8.5 inches version.  How can I saved it on my end as a 11 x 8.5 inch so he doesn't have to uncheck "Choose paper source by PDF page size"?

    I have created a pdf and then want to send it to my boss.  When he recieves it it is saved in the 14 X 8.5 inches version.  How can I saved it on my end as a 11 x 8.5 inch so he doesn't have to uncheck "Choose paper source by PDF page size"?

    Hi heathers,
    You would need to print the file to a new PDF with the appropriate page size.
    Best,
    Sara

  • Using Pages, I have created a document and inserted a Table for use in logging an inventaory. When I came to print this off however the lines for the table were missing but the text was in the Table format, weird! How do I print the Table?

    Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

    Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

Maybe you are looking for