Can I use my old accessories for a 40GB (4G) iPod with new 160GB iPod Classic?

I just purchased a 160GB (7G) iPod Classic. I had been using a 40GB (4G) iPod.
The male connectors on  the accessories I used with my 40GB iPod seem to fit into the female connector on my new 160 GB. So, I am wondering if I can use these old accessories with my new 160GB iPod Classic. The old accessories I used with my 40GB (4G) iPod are as follows.
1) Wall charger made by Apple. It has a firewire connection at one end of the charger cord which connects to  the small white plastic box of the charger that plugs into the wall. The other end of the charger cord seems to fit my iPod 160GB Classic.
2) Dock made by Apple. It uses a firewire connection cord to my computer, in contrast to the USB connection cord that came with my 160GB iPod Classic.
3) Car chargers that worked with my old 40GB, 4G  iPod. The car charger connectors seems to fit my new 160GB iPod Classic. One car charger is made by Apple. The other is not made by Apple.
So, could you please tell me if I can use any or all of these old accessories with my new 160GB Classic without damaging it.
Thanks.
Richard

No.
Stedman

Similar Messages

  • What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

    what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
    I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
    How much trade-in value can I get from VZW or BestBuy or Amazon?
    Thanks!

    http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
    DROID Bionic:  (9/8 launch) – You already know everything about this device, don’t you?
    Samsung Stratosphere:  (9/8 launch) – 4G LTE device running Android 2.3
    HTC Vigor:  (10/6 launch) – Will replace the HTC Thunderbolt
    LG Revolution 2:  (10/20 launch) – Will replace the original Revolution
    Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
    Samsung Illusion:  (9/29 launch) – 3G smartphone running Android 2.3
    Samsung Plato:  (January launch) – whatever it is, it was pushed to 2012
    HTC Bliss:  (9/29 launch) – Lower end Android 2.3 device; the chick phone?
    Motorola XOOM 4G LTE:  (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

  • After complete reset of iPod after lockout,  I cannot retrieve old gamecenter ID.  how can I use my old account for gamecenter now that we have had to create a new username?

    We had to create a new username for gamecenter using the same apple ID.  We want to use the old gamecenter account....we have purchased in-app items for those games and now have no access to that account.  How can I fix this?  Or am I just out of luck and start over with the new username.....

    You are running into the Activation lock and you need to enter the Apple ID and password for the account last used on the iPod.
    iCloud: Find My iPhone Activation Lock in iOS 7
    To recovery use of that account:
    Why do I see the message "This Apple ID has been disabled for security reasons” when I enter my password?
    This message means that someone was unable to sign in to this account multiple times. The Apple ID system will disable the account to prevent unauthorized people from gaining access to your information. You'll need to follow the instructions on My Apple ID to reset your password.
    If not successful, contact iTunes
    Contact iTunes

  • Lost my IPhone5-did not have IFind engaged-Can I use my old 3GS for temp use.

    Lost my IPhone5 looks like i did not have my find iphone engaged. So no way in tracking the phone are  any of those third party apps able to locate my device beside the NSA or apple. who are unwilling
    I have my  icloud syncronzied with my contacts, is keeping me alive but my mac book pro is out dated is out  i dont sync to that.
    So my question i still have my  oldIpnone 3GS. Can I reactiveate this hardware device to replace my lost one, to keep me temporaly up and going?

    if apple tracked devices they would be in big trouble
    the phone can always be tracked using the IMEI number and tri connection tower calucations police use this in cases of missing persons they need to present a warrent to get the carriers to track them though
    and it's a costly thing so doubt they would do it on account of a stolen phone
    you can use your old phone if it's gsm by putting in a sim card from the carrier if it's not gsm but cmda then you should talk to the carrier
    you can restore the iphone 3gs with the backup of the newer ios version but you can use the same appleID and access apps tied to it

  • How can I use my old iPhone 3GS as just an iPod.

    I updated my old iphone 3GS to iOS 5.1 and now I can't use it as just an ipod. It won't sync without a SIM card. I don't need one. Can someone help me out?

    See http://support.apple.com/kb/HT3406.
    Edit:  You'll need a SIM card from the carrier it is locked to.  Doesn't have to be an activated SIM card but needs to be in the phone to re-activate it.  If you don't have one, ask you carrier if they have a deactivated one you can use.

  • Can I use my old number for the new iPhone 5?

    I have an ordinary O2 SIM card that in would like to use for the new iPhone 5, I would love to keep my old number because it would be too much hassle with a new number, is this possible?

    Sure, go to an O2 store or an Apple store.

  • Can i use my old 3g for my wife on itunes without disturbing my new iphone 4 info

    having purchased a new iphone 4, am i able to use itunes separately on our laptop for my older Iphone 3g so my wife can use itunes to store her info for herself

    Those will all work. I'd rather use the newer stuff, however, especially since all of those come in the box.

  • Can we use MRP to plan for FERT in-house produced  with PIR's & has Min/Max

    Hi SAP Guru's
    I have a very critical issue from the client who wants to use MIN/ MAX stock values for planning its finished products (in-house produced)
    <b>here is the details of the scenario</b>
    Client recieves 2 Excel files every week from customer
    <b>1st</b> file contains the Weekly Demand Forecast of FERT material for next 1 year and they upload it in MD61 as PIR's <u><b>BUT</b></u> this value is also <u><b>Inclusive</b></u> of Safety stock value (<b>ex: if weekly demand entered in MD61 as PIR is 50 and if safety stock value is 10, then actual demand is only 40)</b>
    <b>2nd</b> file send contains only <b>safety stock values</b> (for ex in this case let it = <b>10</b>) to be maintained for the FERT materials
    the client wants MRP to plan and trigger based on this PIR's in MD61 and Safety stock level fand plan for FERT, HALB and also ROH materials as defined in the BOM also taking into consideration the current WIP levels (Work in progress for any existing production orders currently being processed) based on the production Lead times values maintained
    so what the client wants is they want to maintain 2 stock values, that is one least stock value and other higher value which if stock falls below this point, will trigger production based on the lead time and considering any WIP levels also
    <b>(for ex in this case if PIR = 50 and safety stock is 10, MRP run result client wants is = 30 and NOT =40)</b>
    so here are my questions
    1. is this scenario feasible? use safety stock and min/max level for in-house produced finished which has demand PIRs in MD61 at the same time?
    2. Also due to SOX complaince regulations, the client does not want to change the forecast values in MD61, so is it possible to make some settings so that forecast is corrected by WIThOUT including the safety stock value in it? ( for ex: in this case as = 40 only and NOt as 50)
    3. which all settings should i maintain like for MRP type or lot size or stock qty levels or anyother customizations if any required so that when we run MRP, can it ignore the safety stock value and generate the client desired output?
    thank u verymuch for your time & expert advice in advance

    Hi Chakri,
    This is not possible as per standard functionality. MRP always creates proposals for the shortage quantity of the safety stock. We have used the user exit in the plant level MRP run to exclude both plant and safety stock in the net requirements calculation.
    You have to write logic to convert the safety stock into plant stock in the user exit so there will be no additional procurement proposals...you can create custom indicatar in materail master or linked any existing indicator like MRP group to the user exits so the MRP will checks this and will not create proposals for the selected parts.
    If you have any questions then please inform.
    Regards
    TAJUDDIN

  • Can i use the same charger for a 4th generation ipod nano with a 5th generation ipod nano

    I am buying a nano 5th generation ipod with no accessories> will my 4th generation charging lead work on it

    Yes.

  • Can I use my old iPhone solely as an mp3 player

    I just got a new iphone 4s and i was wondering if i can I use my old iPhone 4 solely as an iPod with out service? And also can it also use wifi to download apps and send emails to people without service?

    Using an iPhone without a wireless service plan

  • How can i use my old iMac as a extended desktop display for my new iMac?

    I recently purchased a 21.5 in iMac and wanted to use my old iMac as a extended desktop. My new iMac has thunderbolt and USB 3.0 connections while my old iMac has firewire (400 and 800), USB 2.0 and mini-DVI. Is this posible?

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • HT3406 If I choose "restore from iTunes backup" to move everything from old phone.  Will I still be able to use the old phone for music and apps?  Can the old phone be docked up to the computer?  Or will the new and old phone overwrite each other in some

    If I choose "restore from iTunes backup" to move everything from old iphone to a new one, will I still be able to use the old phone for music and apps?  Can the old phone be docked up to that same computer every now and then?  Or will the new and old phone overwrite each other in some way?  In other words, are the two phones treated as different devices when the "restore" option is used to set up the new phone?   Thanks in advance.

    Yes, you can use the old iPhone as an iPod touch.
    Read this:
    http://support.apple.com/kb/HT3406

  • Can I use my old g5 tower as a scratch disk for my Macbook Pro for Photoshop?

    I just made the laptop jump away from towers and am a little shocked by how much difference a smaller scratch disk makes. Can I use my old tower as a scratch disk to help out my new Macbook Pro?
    Any other tweaks I can do to speed up large files in Photoshop? Should I bump up the ram usage by Photoshop above the recommened percentage?

    Hm. It sounds like you know what you are talking about, and apparently I don't. I was just going to plug in a firewire cable to both and hoped that magically scratch disk would appear as an option for my tower.
    Cant I somehow boot the tower as using as a hardrive only? Or applesharing or something else?

  • Can I use my old 2008 mac as the display unit for a Mac mini

    Can I use my old 2008 20 inch mac as a display for a Mac mini as an option instead of buying a new I mac?
    I need a better graphics card and more Ram but happy with the display.

    Hi Yinka,
    You'd first have to set up something like this on the Mini...
    ScreenRecycler...
    http://www.screenrecycler.com/ScreenRecycler.html

Maybe you are looking for

  • Multiple web catalog files for same rpd

    Is there any way to run multiple web catalog files for same rpd in OBIEE?

  • Insufficient Memory

    Hey! Our Editor is getting this error: "Insufficient Memory. Specify a smaller recording range, quit any unused application and install more system RAM." .. when trying to use the Voice Over Tool. She has a 2.5ghz G5 PowerMac, 4GB DDR SDRAM. We're ru

  • Make it so "Step Backward" does NOT change layers

    Just migrated from CS to CS4. The one change that is KILLING my productivity is Adobe's decision to make "Step Backward" also revert to the prior layer. Previously, I could (when drawing with a brush on my tablet) just click "Step Backward" if I mess

  • See PDF attachments without saving the file

    Until a couple of weeks ago, I click on the attachment and the Adobe program will open the file and after that I decided if want to save the file. Now, when I click on the attachment, I get the "Save file" screen. then I have to open Adobe and go to

  • Invoices   posting

    HI how to block invoices posting to accounting in sd process not in FI   but i know regading biiling controls posting block but i want know the if  any other process for po blocking