Can images be used as selections in a combo box in Acrobat 9 Pro?

Can images be used as selections in a combo box in Acrobat 9 Pro? I only see options for text choices when I look at the combo box properties. Basically, I want to click the drop-down and see images (small logos) from which to choose as opposed to text choices.
I'm grateful for any thoughts on this.

Have a look at the PO sample that ships with Designer. It shows the provinces or states based on the country that you choose. Look in the Designer install folder under EN/Samples/Forms/Purchase Order/Dynamic Interactive

Similar Messages

How to Add/Concatenate to a text field, values selected in a combo box

I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

Thanks so much - it works!
>>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
var f1 = this.getField("Text1");
var f2 = this.getField("Combo1");
if (f1.value=="") f1.value = f2.value;
else f1.value = f1.value + ", " + f2.value;
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

While selecting value from combo box in one frame, based on the selection..

Hi friends,
can someone help me out on a issue as it follows:-
iam developing an application where Iam using xsl,html,javascript and xml.
There is no existense of Database at all. data is read from xml.
now,
In a window there are 3 frames. In the 1st frame combo box is there.
Based on the selection in the combo box data will be displayed in the 2nd frame.
now onchange or onselect methods not giving the expected result.
actually,in the the xsl which is having 3 frames,the 1st and 3rd frame
calling src="abc.xml" and src="abc.xml"which are static.
but in the 2nd frame the data need to be changed dynamically.
I have given frame name="frame_ExchangeDetails2" rows="3%" src="cc_marketWatch_02.xml"/>
usually data dynamically comes from database.but here i have to refer xml file
something like [window.href.location="abc.xml"]
but the problem is when you refer supose:-
<frame name="frame_ExchangeDetails2" rows="3%" src="cc_marketWatch_02.xml"/>
the frame is having static page,though there are functions in javascript which are called in onload and onchange.which are not working.
I have tried putting if condition like:-
if(document.abc.fieldname.value=='6'
{ window.location.href = "cc_custLookUpData-mobileno.xml";
so that it could go to the repective page.
but it is not working.
so what should i do if I select from combo box in one frame and based on the selection xml/html page will be displayed in the 2nd frame.
if anybody has google account i can forward the zip file so it will be easier to understand.
Regards
Message was edited by:
Postqueries
Message was edited by:
Postqueries

If you have rights to modify tabular model then, you can create a measure in your Tabular model which returns previous week and then use this measure in Pivot Table.
Thanks,
Sagar K
(Blog: http://datamazik.blogspot.in/)

Print only cursor-selected area of a PDF in Acrobat Pro, just as it is psbl to do in a browser

Hi
I want to print only cursor-selected area of a PDF in Acrobat Pro. That could be both text and images, which are in my selection. Just as it is psbl to do in a browser. Is it possible in Acrobat PRO?
I am using the latest Acrobat Pro 11.0.9

Thanks for your effort but this again clearly does NOT answer my question. I do see a particular problem and that is that I might want to select text and images over a range of multiple pages. In a doc of 20 pages I might want to make a single selection of the text starting PRECISELY at the MIDDLE of page 2 and then continue dragging my selection all the way to PRECISELY the MIDDLE of page 15, thereby selecting all text and images within the precise range of my selection. That is some 13 pages there and I want to print out ONLY THAT selection of text and images. And in that case I cannot use your suggestion with the marquee zoom. Do you get me?

How can I import comments from shared reviewer who doesn't have acrobat pro?

How can I import comments from shared reviewer who doesn't have acrobat pro? I sent out a shared review, but not all of the reviewers have acrobat pro, they do have acrobat reader 9 and have made comments on the document, but they do not appear when I open the shared review from the workspace. Can I import his comments so that they are apart of the shared review?

I figured it out, so I will share just in case anyone else has this issue...
The reviewer emailed me his comments on the document. I opened it and made a comment. When I went to publish my comment a dialogue box opended asking if I wanted to publish his comments to the shared review for him. Says yes and the reviewers comments are now published and a part of the shared review.

How do I correctly use Macro Builder to have a form auto select a TAB depending on a value selected in a combo box?

I am working in access 2013 to update a database first created in Access 2003. It has been saved as an accdb but I have the same problem in earlier versions.
I have a Tab Control subform in my MainDataEntry form which has 5 different tabs. Each Tab has its own set of text boxes and combo boxes for data entry. At the top of the MainDataEntry form there is a Text box [Text393], which has a drop down with
the 5 TAB names, [Mobile Device],[Computer],[Loose Media],[Network] and [Original Device]. When I select one of these values in the Text box, I would like to automatically set focus on the first Textbox or ComboBox inside the corresponding TAB.
I have tried to do this using the MacroBuilder inside the "After Update" Property for the Text or Combo box that is on the MainDataEntry Form using "If" and "Else If" statements for the "GoToControl" action, however
I seem to be able to only get one Tab to work. I have tried several different variations of this, putting the If statement first and the action argument second...putting all arguments inside a group, or not grouped....nothing seems to work. What am I
doing wrong?
EXAMPLE:
If [Text393]=[Mobile Device] Then
    GoToControl
         Control Name   Combo471
Else If [Text393]=[Computer] Then
    GoToControl
Control Name   Bios_Date
Else If [Text393]=[Loose Media] Then
    GoToControl
         Control Name   Combo659
Else If [Text393]=[Network] Then
    GoToControl
         Control Name   User Name
Else If [Text393]=[Original Device] Then
    GoToControl
         Control Name   Combo814
End If

In the Macro Builder's AfterUpdate event for [Text393]:
GoTo Control
Control Name =Forms!MainDataEntry.Controls(Text393.Value).Name
To ensure that the first control on each tab receives the focus, set that control's Tab Index property to zero (0).

How do I make a pdf that can submit a form to the email selected in a combo box?

I'm trying to be able to have the user of a pdf I'm creating, select an email in a combo box and then hit send and have it send to that email address that was selected.
Thanks for the help!

Hi,
I don't think (but may be wrong) that you can do that within InDesign. At the very least, you could draw the form within InDesign but I guess that the interactivity between the list selection and the mail action should be achieved with Acrobat Scripting or LiveCycle Designer if you have it.
FWIW,
Loic

Can I use an LOV with a Combo Box?

... and if so, how?
This should be easy, but I've been searching for over an hour now and I keep getting instruction on how to do each individually, but not how to put them together for the desired behavior.
My goal is to have a combo box (single line text field with a drop down arrow) that, when the user clicks the arrow, displays a list populated from a column in the data base and the user selects a value.
I'm using Oracle 10g2
Thanks in advance,
Darren

Why don't you create a record group and populate that record group into the list item on runtime?
-Ammad

How can I code a lookup table from a combo box

Hi, I am trying to use combo boxes on a front page which selects a desired gas. I then want this to look up a simple 2D table which returns the associated K factor value to be used. Essentially I need to gain the conversion factor for a selected gas to be used in the block diagram to adjust the outputs and inputs accordingly. I tried to load an excel file into an array and then extract the desired numeric value but failed. Any help would be great. I don’t want to be manually inputting the values in the block diagram because there are lots of them so it must be read in from a file of some sort.
Regards

Hello Sniepsy,
You posted this question in the FieldPoint forum, but the
question appears to have nothing to do with that hardware product. I can’t deduce from your post what
programming platform you are using, but I assume that it’s LabVIEW. If so, you might consider reposting your
question to the LabVIEW forum.
I’ll broadly address your question though. If the number of possible input factors is
small (say in the order of less than 50), the easiest thing to do is just
generate 2 1D arrays with one for keys, and one for values. Make sure the indices match up and just look
up the index of a key in array 1, and index array 2 with that to get your
number. A purist might complain that the
lookup time would be linear, and we can achieve log-time with sorted lists and
advanced structures – but since these aren’t in LabVIEW the overhead of
implementing them might outweigh the benefit.
Hope this helps!
Please let us know if you have further questions.
Travis M
LabVIEW R&D
National Instruments

Help! I can't distribute forms, or email them at all in Adobe Acrobat Pro

I have wasted an entire weekend attempting to email, distribute etc. forms out of the Adobe Acrobat Pro 9.2 I just bought. I have uninstalled and redownloaded and I just get the error "unable to connect with mail." I am working off of my Macbook Pro 10.5.8. I will include some screen shots below. I have go to make this work. I also can't send any pdf attachment, I drag and drop, thats a no go, from mail I go through the add attachment and select the pdf that way, and won't go. I'm losing my mind. Any info is appreciated, I have searched all formus and googled to no avail. Oh I am using the student teacher version as well. Thanks

Well I was hoping someone more knowledgeable than I would come and nail this thing for you...
But I think you have moved another step forward by showing that Pro can actually send a file. Therefore in my inexpert opinion, you cannot send the form because of its internal functionality upsetting the email security. Try sending from another email system.
Also, now that I recall, in the distant past I learned the hard way that there is a 'publish' process with those forms and you may not have quite finished the form...check your manual for a final step.
Please somebody fill in that gap for us!!
Adobe student versions are usually (if not always) identical to the full ones AFAIK.

Populate 2nd combo box based on value selected in 1st combo box

I am still using Acrobat 6 though I may be upgrading soon to Acrobat 8. I have a form with two combo boxes, the first "state" has values of MN and WI. Based on which value the user picks I would like to populate a "county" combo box with lists of counties that we deal with.
Thanks,
Gene

One can set the option and export value using an arry: // document level script // Master List of Lists // Each entry in this object listeral is the name of a State //Manually enter the State Names into the state field combo box // The associated value is the item list, where each item is a name value pair, [<County> and [county code, zip code]] // state: ["county name", ["county code", "zip code"]] var oStateNames = {MN: [["-", ["", ""] ], ["St. Louis", ["MNStl", "55001"] ], ["Carlton", ["MNSCrl", "55002"] ], ["Pine", ["MNPin", "55003"] ], ["Cook", ["MNCok", "55004"] ] ], WI: [["-", [" ", " "] ], ["Douglas", ["WIDou", "55005"] ] , ["Bayfield", ["WIBay", "55006"] ], ["Burnette", ["WIBur", "55007"] ], ["Ashland", ["WIAsh", "55008"] ] ] }; //SetCountyEntries() on keystroke entry in state field function SetCountyEntries() { if(event.willCommit) { // Get the new counties list from the Master List // Since the selection is being committed, // event.value contains the State name var lst = oStateNames[event.value]; // Clear the county list if there are no counties for the selected state this.getField("ee.address.county").clearItems(); this.resetForm(["ee.address.code", "ee.address.zip"]); if( (lst != null) && (lst.length > 0) ) this.getField("ee.address.county").setItems(lst); // set opiton and export value } } // end document level script For the combo box "ee.address.county" one can create an array from the export value to populate the county code and zip code // custom keystroke for county combo box if(event.willCommit & event.value != "") { // split county and zip codes var aCodes = this.getField(event.target.name).value.split(","); this.getField("ee.address.code").value = aCodes[0]; this.getField("ee.address.zip").value = aCodes[1]; } // end custom key stroke code

Selecting item in combo box itemEditor, after passing it's dataprovider from a popup window

Hi..
I have a datagrid which has a combo box itemeditor in the first column. When I click on the combobox, there is an item called 'Search'. When this is selected, a pop up window appears where we can search for some contact names. The search results are populated in List component, within the pop up and on double click of any of the names from the list, all of the list content is passed on as dataprovider to the combobox itemeditor of the grid. It works fine till here. Now, how can I highlight the selected name(name on which I double click, in the list of the pop up window), as the 'selectedItem' of the combobox itemeditor? ie., as soon as I double click the name, that name should appear on that combo box. As of now, wehn I double click, the search result names are passed on as dataprovider to the combobox, but a blank entry will be selected in th combobox, instead of the selected name from teh list of the pop up window. Can you please help me out on how to achieve this? I had been cracking my head for 2days now, hasn't worked out yet for me

Hi...
there are two events which have been used, one is doubleclick event and the other one is on selecting the item from the list and clicking on OK button(this will be the most frequently used function, i cannot use event target event for this OK button... ) . I have attached the screen shot. Please have a look at it and let me know how can i achieve that...
I can use custom event, but the main problem is that the inline itemeditor's details are not accessible in the code.... I can access some function from within the inline itemeditor combo box using outerDocument.myFunction() (this is something like GET). Is there a similar way, to SET the data into this itemeditor?

Fill a combo box based on the selection of another combo box

Hi All,
I am new to jsp & java script. I have a arraylist of communities and there are 2 combo boxes meant for source community & destination community.
First user will select Source community , after that I've to remove that community from list and display the option for destination community combo box.
Here the problem is I am getting the source community value in a java script function - "checkSource() " which I've written at the "onClick" of source community.
Now java script variable has that community & list of community is a java variable, so I am not able to remove that community from java list.
Please suggest in the same.
I've written like this -
function checkSource()
 var selIndex = document.targetForm.srcgroupname.selectedIndex;
var srcCommunity = document.targetForm.srcgroupname.options[selIndex].value;
alert("Selected Src Community-"+srcCommunity);
 <%
 alert("Community length-"+community.size());
 community.remove(community.getIndex( %> srcCommunity <%));
 alert(community.size());
 %>
But this is not working. community is a java list.
Please help....
Thanks in Advance
Sneha

Do it with AJAX. Here -> http://www.iem.pw.edu.pl/~opalam/sample/TestAJAX.zip You can download a small, sample project that presents AJAX.
In the project Servlet, Gson and Jquery is used. When onchange is fired in the first select box a js script method is invoked. This method uses ajax to get the json (gson is used to transfer java objects to json) data from the servlet depending on the value of selected option. When data are obtained the second select box is populated. Of course it might be written better but the general idea is clearly visible which was my goal. Hope this helps.

Powershell Unique Selections for Multiple Combo Boxes

I am currently working on a powershell script that will use 4 combo box controls. I would like for them to all use the same data source whether it be an array or just a .txt file. I would like for each selection to be unique so that no 2 combo boxes can
have the same item selected. Is there a way to hide the item selected in the data source so the other combo boxes do not even have the option to select it and then when the user changes the item in one of the combo boxes the item is available again?

What I am looking do do is have a list of values (T1111,T1112,T1113,T1114) to be selected from by 4 combo boxes. Each value can only be selected once so if one combo box picks T1111 the other 3 do not have that option in its selection. So far I reload the
combo boxes ever time a selection is made and remove the option from the array, but I was looking to see if there is a better way. As it currently stands, getting distinct values isn't working.
Code snippet to remove item from array:
function Get-DataSource
$array = @("T1111", "T1112", "T1113", "T1114")
$combo1 = $combobox1.SelectedItem.ToString()
$combo2 = $combobox2.SelectedItem.ToString()
$array = $array | Where-Object -FilterScript { $_ -ne $combo1 }
$array = $array | Where-Object -FilterScript { $_ -ne $combo2 }
return $array
I apologize for not uploading my code.
function OnApplicationLoad {
#Note: This function is not called in Projects
#Note: This function runs before the form is created
#Note: To get the script directory in the Packager use: Split-Path $hostinvocation.MyCommand.path
#Note: To get the console output in the Packager (Windows Mode) use: $ConsoleOutput (Type: System.Collections.ArrayList)
#Important: Form controls cannot be accessed in this function
#TODO: Add modules and custom code to validate the application load
return $true #return true for success or false for failure
function OnApplicationExit {
#Note: This function is not called in Projects
#Note: This function runs after the form is closed
#TODO: Add custom code to clean up and unload modules when the application exits
$script:ExitCode = 0 #Set the exit code for the Packager
#endregion Application Functions;2
# Generated Form Function
function Call-tenet_psf {
#region Import the Assemblies
[void][reflection.assembly]::Load('mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a')
[void][reflection.assembly]::Load('System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a')
[void][reflection.assembly]::Load('System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089')
[void][reflection.assembly]::Load('System.ServiceProcess, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a')
#endregion Import Assemblies
#region Generated Form Objects
[System.Windows.Forms.Application]::EnableVisualStyles()
$form1 = New-Object 'System.Windows.Forms.Form'
$combobox2 = New-Object 'System.Windows.Forms.ComboBox'
$combobox1 = New-Object 'System.Windows.Forms.ComboBox'
$buttonOK = New-Object 'System.Windows.Forms.Button'
$InitialFormWindowState = New-Object 'System.Windows.Forms.FormWindowState'
#endregion Generated Form Objects
# User Generated Script
function OnApplicationLoad {
#Note: This function is not called in Projects
#Note: This function runs before the form is created
#Note: To get the script directory in the Packager use: Split-Path $hostinvocation.MyCommand.path
#Note: To get the console output in the Packager (Windows Mode) use: $ConsoleOutput (Type: System.Collections.ArrayList)
#Important: Form controls cannot be accessed in this function
#TODO: Add modules and custom code to validate the application load
return $true #return true for success or false for failure
function OnApplicationExit {
#Note: This function is not called in Projects
#Note: This function runs after the form is closed
#TODO: Add custom code to clean up and unload modules when the application exits
$script:ExitCode = 0 #Set the exit code for the Packager
$FormEvent_Load={
#TODO: Initialize Form Controls here
Load-ComboBox $combobox1 (Get-DataSource)
Load-ComboBox $combobox2 (Get-DataSource)
function Get-DataSource
$array = @("T1111", "T1112", "T1113", "T1114")
$combo1 = $combobox1.SelectedItem.ToString()
$combo2 = $combobox2.SelectedItem.ToString()
$array = $array | Where-Object -FilterScript { $_ -ne $combo1 }
$array = $array | Where-Object -FilterScript { $_ -ne $combo2 }
return $array
#region Control Helper Functions
function Load-ComboBox
<#
.SYNOPSIS
This functions helps you load items into a ComboBox.
.DESCRIPTION
Use this function to dynamically load items into the ComboBox control.
.PARAMETER ComboBox
The ComboBox control you want to add items to.
.PARAMETER Items
The object or objects you wish to load into the ComboBox's Items collection.
.PARAMETER DisplayMember
Indicates the property to display for the items in this control.
.PARAMETER Append
Adds the item(s) to the ComboBox without clearing the Items collection.
.EXAMPLE
Load-ComboBox $combobox1 "Red", "White", "Blue"
.EXAMPLE
Load-ComboBox $combobox1 "Red" -Append
Load-ComboBox $combobox1 "White" -Append
Load-ComboBox $combobox1 "Blue" -Append
.EXAMPLE
Load-ComboBox $combobox1 (Get-Process) "ProcessName"
#>
Param (
[ValidateNotNull()]
[Parameter(Mandatory=$true)]
[System.Windows.Forms.ComboBox]$ComboBox,
[ValidateNotNull()]
[Parameter(Mandatory=$true)]
$Items,
[Parameter(Mandatory=$false)]
[string]$DisplayMember,
[switch]$Append
if(-not $Append)
$ComboBox.Items.Clear()
if($Items -is [Object[]])
$ComboBox.Items.AddRange($Items)
elseif ($Items -is [Array])
$ComboBox.BeginUpdate()
foreach($obj in $Items)
$ComboBox.Items.Add($obj)
$ComboBox.EndUpdate()
else
$ComboBox.Items.Add($Items)
$ComboBox.DisplayMember = $DisplayMember
$combobox1_SelectedIndexChanged={
#TODO: Place custom script here
Load-ComboBox $combobox2 -Items (Get-DataSource)
$combobox2_SelectedIndexChanged={
#TODO: Place custom script here
Load-ComboBox $combobox1 -Items (Get-DataSource)
# --End User Generated Script--
#region Generated Events
$Form_StateCorrection_Load=
#Correct the initial state of the form to prevent the .Net maximized form issue
$form1.WindowState = $InitialFormWindowState
$Form_Cleanup_FormClosed=
#Remove all event handlers from the controls
try
$combobox2.remove_SelectedIndexChanged($combobox2_SelectedIndexChanged)
$combobox1.remove_SelectedIndexChanged($combobox1_SelectedIndexChanged)
$form1.remove_Load($FormEvent_Load)
$form1.remove_Load($Form_StateCorrection_Load)
$form1.remove_FormClosed($Form_Cleanup_FormClosed)
catch [Exception]
#endregion Generated Events
#region Generated Form Code
$form1.SuspendLayout()
# form1
$form1.Controls.Add($combobox2)
$form1.Controls.Add($combobox1)
$form1.Controls.Add($buttonOK)
$form1.AcceptButton = $buttonOK
$form1.ClientSize = '614, 289'
$form1.FormBorderStyle = 'FixedDialog'
$form1.MaximizeBox = $False
$form1.MinimizeBox = $False
$form1.Name = "form1"
$form1.StartPosition = 'CenterScreen'
$form1.Text = "Form"
$form1.add_Load($FormEvent_Load)
# combobox2
$combobox2.FormattingEnabled = $True
$combobox2.Location = '123, 92'
$combobox2.Name = "combobox2"
$combobox2.Size = '121, 21'
$combobox2.TabIndex = 2
$combobox2.add_SelectedIndexChanged($combobox2_SelectedIndexChanged)
# combobox1
$combobox1.FormattingEnabled = $True
$combobox1.Location = '123, 64'
$combobox1.Name = "combobox1"
$combobox1.Size = '121, 21'
$combobox1.TabIndex = 1
$combobox1.add_SelectedIndexChanged($combobox1_SelectedIndexChanged)
# buttonOK
$buttonOK.Anchor = 'Bottom, Right'
$buttonOK.DialogResult = 'OK'
$buttonOK.Location = '140, 254'
$buttonOK.Name = "buttonOK"
$buttonOK.Size = '75, 23'
$buttonOK.TabIndex = 0
$buttonOK.Text = "&OK"
$buttonOK.UseVisualStyleBackColor = $True
$form1.ResumeLayout()
#endregion Generated Form Code
#Save the initial state of the form
$InitialFormWindowState = $form1.WindowState
#Init the OnLoad event to correct the initial state of the form
$form1.add_Load($Form_StateCorrection_Load)
#Clean up the control events
$form1.add_FormClosed($Form_Cleanup_FormClosed)
#Show the Form
return $form1.ShowDialog()
} #End Function
#Call OnApplicationLoad to initialize
if((OnApplicationLoad) -eq $true)
#Call the form
Call-tenet_psf | Out-Null
#Perform cleanup
OnApplicationExit

Multiple selection in a Combo Box of a JOptionPane.

Hello,
Can we have multiple selection of the items in a Combo Box of a JOptionPane?
An example will be highly appreciated.
Thanks.

Use a JList for multiple selection.

Can images be used as selections in a combo box in Acrobat 9 Pro?

Similar Messages

Maybe you are looking for