Can PP make a video clip find its matching audio and pull it.

I have a SEQ that i created. I made 2 copies of the same seq.
Then i used the copy to ad the razamataz.
Then i unlinked the audio and exported that to an aiff.
I opened the aiff in soundtrack. Doctered it a bit and exported an aiff file from there.
I reimported that aiff and put it back on the TL .It matched flawlessly.
Then the client all of a sudden wants me to add another clip.
When i open up PP the original seq was no where to be found.
So is it possible to use the clip on the TL to pull the audio back to at least 1 clip at a time?
Can premier ad that audio clip back to the TL (w/ handles) or am i just simply facing a replace clip and re-edit the video situation?

Its not a large project. 38 clips, 9 SEQs, 14 composition elements, 4 audio elements
I am gonna chalk it up to operator error why the original is gone.
I think this is a straight up 'replace clips' and copy grade situation. Then i gotta reclean the audio.
I did figure out that the fastest way to replace the audio clip was to 'reveal in 'project' , load to source monitor and pull the audio stream.
Maybe CS6 will have the ability to "replace audio/video clip with original source" comand or something to that effect.
Thanks for your responses.

Similar Messages

Can Shake make a video clip look poster like?

I'm a very long time user of FCP. I'm looking for a software app that I can put on a video clip that will give it a "poster" or cartoon like or 2D animated look. If anyone's seen the 2008 Coca-Cola short film winner, this is what I'm looking for:
http://www.ccrfa.com/ccrfa/
Can Shake do this? FCP can give a poster-like look, but it's only a frame at a time. On a five minute video clip, that could take awhile...
I'm willing to buy whatever software / hardware is needed, but I just want to know if I'm buying the right software.
Thanks.

Welcome to the discussions.
This has been discussed a lot in the Motion and Final Cut Pro forums:
http://discussions.apple.com/search.jspa?q=adventuresin+cellshading&objID=f656&dateRange=all
and here:
http://discussions.apple.com/search.jspa?q=cel+shading&objID=f1179&dateRange=all
Patrick

How can I make two video clips within one frame?

OK, I have two video clips. I just need to shrink one video and put it in to the corner of my other video. How can I do this?
Thank you for your help!
Message was edited by: Stevamundo

Hi
Picture in picture - is no a standard option in any version of iMovie.
iMovie ? - 6 You'll need a third party *plug in* to do this: (iM'08 no go at all)
• Stupendous software http://www.stupendous-software.com
• GeeThree http://www.geethree.com
• cf/x. http://www.imovieplugins.com
• Apple http://www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
• http://www.imovieplugins.com/fxhome.html
*You also can do this with QuickTime-pro.* But You need the disipline of an angle.
Quoting:
Klaus1 writes: As Bengt says, you can do this with Quicktime Pro. Here is how:
Organize the video clips and/or stills that you want to superimpose on to your main video clip, by having these in separate, individual iMovie projects (no matter how small). It helps if these are in the exact length/time you want later.
Now start with the clip in your iMovie project on to which you want to superimpose one of more smaller video clips or stills. Lets call it Main Clip. Export this (share) to Quicktime Pro in DV (full quality). make sure it has the same aspect as before (Quicktime tends to default to 4:3. If you want 16:9, read on).
In Quicktime, with this project open, select File ~ Open File. Select the iMovie file (in your movies folder) of the first clip/still you want superimposed. This will open in its own QT window. Select Edit ~ copy. If it is a movie clip then select all ~ copy (or you will only get one frame!). Switch back to the Main Clip window, and click in the scroll bar where you want the extra clip/still to appear. Choose Edit ~ Add to Movie.
You can repeat this as many times as you like, if you want to build a 'Video Wall', i.e. have several superimposed clips/stills on the same Main Clip.
Do not worry that the new clip overlaps or covers up the Main Clip, at this stage.
Choose Window ~ Show Movie Properties. The Properties Dialogue appears.
You will see a list of video (and audio) tracks. Track one will be the Main Clip, track 2 your new added (superimposed) clip. Click track 2, then click visual settings. From the Scaled Size pop-op menu, choose percent. Then type 50 into the first box. If Preserve Aspect Ratio is turned on you won't need to type 50 into the second box. You have made the pasted footage appear at one quarter its original size. The inset is now hugging the top-left corner of the Main Clip. If you want, you can type numbers into the Offset Boxes to shove it away from that corner (there are 72 pixels to the inch).
If your original Main Clip was required in 16:9, unclick (de-select) Preserve Aspect Ratio, and type in the relevant numbers in the two boxes, in Video Track 1.
PAL (for Europe):
Standard DV (4:3) 788 x 576
DV Widescreen (16:9) 1050 x 576
NTSC (for the USA):
Standard DV (4:3) 720 x 528
DV Widescreen (16:9) 874 x 480
This will not affect video track 2, but if that is also wanted in 16:9 repeat for that track.
You can superimpose, 3, 4, or more such 'overlaps' on the same clip, and spend a happy afternoon tapping away for each track in the Offset Boxes until you have got them all in the right place! You can even overlap them, if you can remember (or note down - hire a secretary to take notes) which track you want on top etc.
Save the completed QT file. Import the completed file into a new iMovie project. Import this into the original iMovie project, substituting the old clip you copied to QT as Main Clip for the new fancy clip you have made.
Have fun!
END OF QUOTE !
*My way:* When I started to need more than iMovie could offer I took a look into
FinalCut Express and counting the sum of all Plug-ins needed and FCE I found out
that FCE is a real bargin.
• color-correction
• blue/green screen
• 99 video and audio tracks
• slightly rotation a clip eg 1 deg - nice horizon
• slightly or major scale up or down
• and of cause Picture in pictures
And so much more.
Yours Bengt W

Can I make a video with Powerbook Pro

can I make a video using camera on Powerbook Pro

MacBooks and MacBook Pro both have a built-in camera on the bezel. So if you were talking one of those, then you can use Quicktime Pro to make a video or Ambroisa SnapZ Pro. Later versions of Mac OS X support video capture on standard Quicktime. So please go to Apple menu -> About This Mac and tell us your operating system version. And please properly identify your Mac using this tip:
https://discussions.apple.com/docs/DOC-6413

Can anyone tell me how to make a video clip in color transition?

Can anyone tell me how to make a video clip in color transition like the opening of "Oh Brother where art though" ?
You know the scene at the start where it starts off Black and White then as we move down the timeline it transitions to a rusty brown gradually.
It's on the Apple site for FC Studio as a promo clip.

how to do a keyframe trasition in the Color FX room
I realize that you can "add" keyframes to the timeline in COLORFX, but I don't believe they are always observed, and then they usually disappear in retrieved projects, and aren't persistent if you leave the room. To remember where they are... you might mark in a keyframe on those frames in another room as a pathfinder. The behaviour is consistent with a creature of the six-legged variety.
Method 1. If you are trying to taper the effect (any effect) in COLOR FX, the most linear approach is to render two versions of the clip; one "with", one "without" and do an opacity fade once you have returned them to Final Cut. This gives you the most control, flexibility, repeatability and consistency.
Method 2. You may attempt to keyframe the bleach bypass settings within the node itself -- the preset that comes with COLOR doesn't have any controls, but the Nattress plugin does.
Method 3. Set up a "blend" node with your bleach bypass feeding one of the inputs and leave the second input to default to the untreated video... keyframe a transition from "1.00000" to "0.00000" and that should work.
Note: the keyframe timeline markers will disappear from the timeline if you exit the clip, but the effect is likely to persist. At least that was what was happening a couple of minutes ago... for me, the effect and blend performed the transition just like it was previewing when rendered. This strategy is subject to being created and rendered "on the spot right now", and I advise making sure you have your renderqueue settings ready to go... load the clip from the COLORFX room using the Mac command bar at the top of the screen and render it right away. Don't try to save it for later. Just Do It.
An announcement went around about two weeks ago that Mr. Deakins' website was back up and running, so give him another try... poor guy has been swamped probably doing Dreamweaver maintenance... yeah, that must be it...
jPo

How can I watch a video clip in my iPad 3?

I just got an attached video clip from my brother, sent to my hotmail. When I open the clip, it just shows an overcrossed play bottom! How can I watch a video clip in hotmail, using an iPad? Do I need to download an app or what? Please!?

Well on a Mac you can install
Flash
Silverlight
Perian
VLC
Flip4Mac
DivX
and many other codecs/tools to watch anything.
Guess the iOS isn't really all that it's cracked up to be, ignoring the wider world out there.
Your only choice to complain to Apple about closed devices they make, but of course they know this already and using the iPad as a cheap "netbook" halo effect device so you get to upgrade to a Mac, just like they do with iPhones and iPods.
In the meanwhile they are slowly closing the door on OS X, a little at a time so it's not noticeable.
Pretty soon the excuse will be "sorry I can't play your video you sent me mom, I've got a Mac"
https://www.apple.com/feedback/macosx.html

I want to copy video, cutaways and audio combined and use in another project. So far I can only copy the video clip or one of the other elements at a time. How do I group all of them?

I want to group my video clip with its audio and cutaway clips so that I can copy the segment and move it to another project. So far I can only move one element at a time. How can I group all the elements?

You can select multiple objects in the timeline in the usual Mac way - hold down the shift key while you click on the objects then copy, select other project, position playhead where you want to insert then paste.
Geoff.

How can I blend two video clips where they join side by side in one movie?

Hello Marvelous Movie Making Minds,
I am working with Adobe Premiere 6 on a Windows 7 machine.
How can I blend two video clips where they join side by side in one movie?
I know how to place two or more video clips together in the same movie, but how can I give them a bit of a blend just where they join?
I have a PDF instruction manual and the built-in web browser instructions. In the instruction manual in "Chapter 7: Superimposing and Compositing" it talks about the transparency of any video clip, and I understand that... but I don't want to make one or the other video clip transparent anyplace except where the two video clips join together with perhaps a bit of overlap.
I'd like to make a little blur just where the two videos join in the middle... is this possible?
Thanks,
digi

Aha that kind of blending.
Have not used 6.5 in a loooooooong time.
So this is from memory, hope i get this right.
Set the two clip on top of each other
Make a matte in Photoshop and superimpose this over the two clips.
Go to the Transparancy Settings and set the top clip in video 2 to Alpha key.
Screendump for matte:
The right side is made black just for the forum but should be transparant.

How do I make a video clip appear smaller in Adobe Premiere 6.5?

Hello,
I am attempting to make a video clip appear smaller with a black background, the way movies often do when they show out takes at the end during the credits. I'm sure this is something pretty simple, but I can't seem to figure it out. Any assistance would be greatly appreciated!

Cannot recall the full line-up of Effects in Pr 6.5, but you should have the fixed Effect>Motion>Scale, which will allow you to resize the Clip. You might need to use Motion>Position in addition. Basically, you will doing a PiP (Picture in Picture), with no Clip below, just the black showing.
Good luck,
Hunt

In imovie 09 can you make one continuous clip

in imovie 09 can you make one continuous clip
canu u download video in HDV to imovie 06 from a SONY HDR-Fx 7 video camera as one clip

No. iMovie 09 (and 11) is designed to import movies from camcorders. Every time it detects a start/stop it will make a different clip. They will be in chronlogical order, rather than edited order.
If you still have iMovie 06, you can load the tape there as one continuous clip. Then EXPORT USING QUICKTIME choosing HDV as your codec. This will produce an MOV file that iMovie 09 or 11 can read, and which will be in the edited order.

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

How can i change a video clip format that will play on a PC to play on my MAC

How can i change a video clip format that will play on a PC to play on my MAC

http://www.flip4mac.com/ supports all but DRM formatted Windows video. http://www.videolan.org/ and MPEG4Streamclip may support additional. DRM Windows video may require running Windows natively on your Mac. Or requesting the source give you an MPEG4 compatible format or Realplayer formatted file. Running Windows is described here: https://discussions.apple.com/docs/DOC-2741

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time.

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time. Also, I am able to move the picture using Transform. But unsuccessfull in making with two stills in same clip. Thank you for reply.

If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
Russ

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Sounds like you need to contact skype.

Can PP make a video clip find its matching audio and pull it.

Similar Messages

Maybe you are looking for