Can replies get cached?

Hi,
I have a very strange problem. I have a web service that asks for projects based on a users responsibilities. These projects are retrieved from the Oracle database. I'm testing the ws in EM by providing the same XML message over and over. But the reply is not the same every time. It seems to be a random answer. One time project A is retrieved and the other project B and then all projects. In the database the answer is the same all the time, project A is returned as it should. Are replies somehow cached or how is this possible??
Thanks for your help!
Kerstin

sean,
Sounds like you have looked into it. Bear in mind that caching will not necessarily help. The reason you're building a database application is because you want dynamic results. In fact you say your query has lots of wildcards, presumably because it is based on a search page with many inputs. What are the chances that two users (or even the same user) ask the exact same question with the same parameter inputs and values? Only then would a cached result set help at all.
If, on the other hand, the search results are fairly static, you might consider generating a static HTML doc based on the data in the database on set intervals and showing that to the user instead.
There will always be some lag when you run any dynamically generated page. In the Southwind app, though, it should be very small. Have you tried running a few pages in debug mode (see developer toolbar at bottom) and looking at the timings? Perhaps there is something systemic going on on your server?
Sergio

Similar Messages

How can I get rid of cache files?

Premiere Pro, can't find cache files on Mac, not in the common folder, clean doesn't work, I know there are Gigs of them on my drive. How can I get rid of them?
I started a premiere project I had worked on before using an external drive but forgot to hook up the external drive. In a few minutes, Premiere loaded 5 gigs of cache files onto my macbook pro drive OSX 10.8.6. I tried the following to free up the space:
Tried to "clean" the cache folder before switch it to the external drive - this only removed a small amount of the 5 gigs created
Tried to find files in the Application Support/Adobe/common folder - no cache files found
Tried searching the web for answers - no new info
Tried searching my drive for the files - can't find them
Tried restarting the MacBook and Premiere with and without the external drive - no luck
Now what?
Message was edited by: Kevin Monahan
Reason: please make a shorter and more concise title next time. Thanks.

First off, exactly which version of Premiere are you running? Not simply PPro CC or CC2014 but the version number shown in the About box.
I'm not clear whether you're saying that Premiere can't find the cache files or that you can't find them.
I gather that you're referring to the Clean button on the Media tab of the Preferences dialog, which is also where you set the path for the cache files.
Are you sure you're looking in the correct Library--not the one that's readily accessible under Macintosh HD but the one that Apple, in it's infinite wisdom, hides from users. To access it, open the Go menu and press Option.

TS1314 I accidently deleted my ipod photo cache. How can I get it back?

I accidently deleted my IPod Photo Cache thinking I didn't need it. Now I've messed everything up. How can I get this back?

Click "View"menu in the Safari menu bar at the top of the screen
and select "Show Toolbar".
or
Click "View" menu in the Safari menu bar and click "Customize Toolbar".
From the drop down drag the default set into the Toolbar.
the one under " or drag the default set into the Toolbar"
Click "Done".
Best.

How can I get a count of objects in the near cache? (Extend client)

Hi,
I'm trying to figure out how to get the count of objects in my near cache (from c++ client). Knowing the size of the near cache is a key factor when optimizing configurations for performance.
However if I call size() on the cache handle I get the count of objects in the cache (ie the cluster). How can I get a count of objects in the near cache?
Thanks
Rich Carless

H Rich,
It may not be ideal, but I think you may be able to infer the size by using the HeapAnalyzer (http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_heap_analyzer.html) facility, specifically the "class" based HeapAnalyzer. Its Snapshot representation http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_class_based_heap_analyzer_1_1_snapshot.html provides a mapping between class name and ClassStats (http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_class_based_heap_analyzer_1_1_class_stats.html) which provides information on how many instances of a given class type are in memory. Note the reported counts are process wide but if your key or value type are distinct you may be able to infer your answer. I realize this is rather complex, my only other suggestion would be to just make some guesses on size and see how they effect performance.
Mark
Oracle Coherence

Using Mac OSX 10.7.1: recently replaced our DSL modum & wireless router and suddently I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing historty, forms, cookies and cache but it continues to happen.

Using Mac OSX 10.7.1: recently replaced our DSL modum and wireless router, suddenly I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing history, forms, cookies and cache but it continues to happen.

Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.

Where does Mail keep its hidden cache of auto-complete email addresses. I am plagued with an incorrect email adress I can't get rid of. Have made sure it's deleted from Contacts and made sure it's deleted from "previous recipients" list in Mail - i

Where does Mail keep its hidden cache of auto-complete email addresses. I am plagued with an incorrect email address I can't get rid of. Have made sure it's deleted from Contacts and made sure it's deleted from "Previous Recipients" list in Mail. But it still keeps reappearing ... obviously a secret cache file hidden somewhere?

Autocomplete has nothing to do with this problem.
From the Mail menu bar, select
Window ▹ Connection Doctor
Look for a disused SMTP (outgoing mail) account in the window that opens. Double-click it. Another window will open, showing a list of all the outgoing mail accounts. The unwanted one will be selected. Click the minus-sign button to delete it, then click OK.
If there's more than one unwanted account, repeat.

Does my Domain user account get cached so I can Logon of the network?

Does my Domain user account get cached so I can Logon of the network?
Thanks your help.
Lou

In windows or in os x? In windows if it's a windows network for domain profile is usually auto-cached. In OS X this has to be enabled in directory utility as part of your Active Directory settings, otherwise it won't allow logon off network.

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

Please I can not get a .jar file to run on XP SP3 start/run/cmd/

I can not get a .jar file to run on XP SP3 start/run/cmd/
Please help if can figure this out. I'm convinced it is a Windows XP SP3 problem from searching on google and seeing other ppl on XP SP3 with same problem (but no working solution for myself). I'll try to be complete-listing all I've done.
I had installed: Java SE Runtime Environment v6u14 for Windows Multi-language
I had checked here it was working properly: http://www.java.com/en/download/manual.jsp
I'm trying to run this jar file (soht-client-0.6.2.jar):
http://prdownloads.sourceforge.net/telnetoverhttp/soht-java-client-0.6.2.zip?download
http://www.ericdaugherty.com/dev/soht/javaclient.html < this is the information for the program.
(yes the file can be executed and should open the program's window
I wanted to post screenshot of it but friend that it's working for isn't here)
_(Please find log of all cmds I did in this post here: http://pastebin.com/f792983df )_
_I have extracted +'all' the files to: C:\062\+_ (I have tried using other directories, same problem)
++I then start/open/run/cmd+
then I: cd C:\062\+
then I try various commands - all+ of these do absolutely nothing- meaning no errors, no reply, no window opens, nothing except enters that directoy again:
java -jar soht-client-0.6.2.jar
java -jar -client soht-client-0.6.2.jar
java -client -jar soht-client-0.6.2.jar
java -jar soht-client-0.6.2.jar soht.properties
soht-client-0.6.2.jar
So I try this cmd: java soht-client-0.6.2.jar
Reply:
C:\062>java soht-client-0.6.2.jar
Exception in thread "main" java.lang.NoClassDefFoundError: soht-client-0/6/2/jar
Caused by: java.lang.ClassNotFoundException: soht-client-0.6.2.jar
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: soht-client-0.6.2.jar. Program will exit.
I try this cmd:
java -jar soht-client-0.6.2.jar -client
Reply:
C:\062>java -jar soht-client-0.6.2.jar -client
Unable to load configuration file: -client - java.io.FileNotFoundException: -cli
ent (The system cannot find the file specified)
SOHT Java Client
The SOHT Java Client requires a properties file. Either start
the application in the same directory as the soht.properties
file, or specify the file name on the command line:
java -jar soht-cleint-<version>.jar c:\soht.properties
So then I do these cmds which produce the exact same error/reply just above; Unable to load..:
j_ava -jar soht-client-0.6.2.jar -client soht.properties_
java -jar soht-client-0.6.2.jar -client C:\062\soht.properties
So then I copy soht.properties to C root and do:
java -jar soht-client-0.6.2.jar -client C:\soht.properties <same error as above
Then from other information I have read I right click on the .jar file, select open with Always open with:
_"C:\Program Files\Java\jre6\bin\javaw.exe"_
Try again.. same problem.
Then I do cmd:
_"C:\Program Files\Java\jre6\bin\javaw.exe" -jar "C:\062\soht-client-0.6.2.jar"_
does nothing, retry the other commands same thing (either nothing or those same replies)
Then I read (http://forums.sun.com/thread.jspa?threadID=5384879) someone had the same problem as I and they solved it by uninstalling all Java/reboot/ then install JDK 6 Update 14 with NetBeans 6.5.1 start NetBeans and then it worked for them.
So I unistalled all Java, rebooted and gave the cmd another try (before re-installing), now a new error, of course:
C:\062>java -jar soht-client-0.6.2.jar
'java' is not recognized as an internal or external command, operable program or batch file.
Then I install Java SE and NetBeans Cobundle (JDK 6u14 and NB 6.5.1) Final Release/ reboot/ open Netbeans/
go to test java page; all is good, run cmds again -and still nothing..
C:\062>java -version
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode, sharing)
I reassociate program with: C:\Program Files\Java\jre1.6.007\bin\javaw.exe_
same thing.. nothing
Thank you very much for your time :D_
PS. My computer has been newly reformatted so needing another reformat I'm sure is not the solution.

Thank you very much for your replies Taggert_77 & swmtgoet_x :D
Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
The proper cmd is simply: java -jar soht-client-0.6.2.jar
I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
java -client -jar soht-client-0.6.2.jar soht.properties
Thank you again...the mystery remains
PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above).

Can't get iCloud to work properly from new MBP.

I recently bought a new MBP and gave my old one to my wife. I deleted the calendar and contact info from my old MBP since she didn't need it. Only I didn't realize that it would also delete all the information from my new MBP that I had initialized from a Time Machine back-up.
But now, I can't get thinks back to normal. I had recently upgraded my old MBP to Mavericks, so I posted my questions there on the assumption that the problem was with Mavericks. I now think the problem is with iCloud, so I'm posting here as well.
Here's my tale of woe ...
First, I tried restoring my back-ups, but the restored info would literally disappear with 2-3 seconds of being reloaded. I sat there and watched my contacts appear, then disappear. Three times. The Mavericks folks made some suggestions about deleting files from the Application Support Folder. No help. Same results. Watched my contacts load and then disappear 3 more times.
So I decided to start more-or-less from scratch. I deleted my iCloud account from both my MBP and my iPad. I then reloaded my calendar and my contacts from the back-ups on my MBP. Everything fine so far. All calendar items are there. All contacts are there.
I re-added the iCloud account on my MBP. Still okay. Contacts and calendar info still there. However, System Preferences would not allow me to check the box next to "calendar." It said "setting up" then stopped and unchecked the Calendar box. I am also unable to enable the iCloud account within Calendar preferences.
I re-added my account on my iPad. No calendar info, but that didn't surprise me because the calendar wouldn't connect from my Mac.
But the Contacts on the iPad included ONLY those contacts that I had added from the previous recipients window after my last back-up. None of the contacts that had come from my previous back-up were there even though they were on my MBP. So I tried unchecking the box in System Preferences. All of my contacts disappeared from my MBP. None disappeared from my iPad.
So at this point, my iPad becomes a games machine. I can't get my contacts to it. I can't my calendar to it. Email is no good without my contacts.

The iCloud Calendar and Time Machine don't play nice together. If you accidentally delete your calendars, they are deleted on iCloud: you restore the cached versions from TM, and iCloud promptly brings them up to date by deleting them again.
However it is possible to restore from Time Machine (or another backup system if it's included your calendars) by following the following steps:
Turn off your internet connection. Make sure that it really is completely off.
Restore from Time Machine or your backup. This should restore your calendars to list under your iCloud username.
Now carry out this process with each calendar:
Select a calendar listed under your iCloud login name.
From the File menu choose Export...>Export. An .ics file will be saved at your designated destination.
Create a new calendar with the same name as the one you've just exported from, choosing 'On My Mac'.
From the File menu choose Import... Select the .ics file and choose to import it into the calendar you just created (make sure you don't import it into the iCloud version).
Now your calendars are listed under 'On My Mac' as well as under your iCloud login name.
Reconnect to the internet. Your iCloud calendars will disappear as before. Now carry out the following process with each of the 'On My Mac' calendars:
Select your 'On My Mac' calendar. From the File menu choose 'Export...' then 'Export...'; from the sub-menu. This will create an .ics file at the location chosen in the Export dialog.
From the File menu choose 'New Calendar' then your iCloud login name in the sub menu.
A new calendar called 'Untitled' will appear in your sidebar under your iCloud login name. Change its name to that of the calendar you exported.
From the File menu choose 'Import...' then 'Import...' from the sub-menu. A navigation pane will open: navigate to and choose your exported .ics file.
iCal will ask you where to import this to. Click the drop-down menu and select the iCloud version of your calendar (make sure not to choose the 'On My Mac' version). Import.
Your calendar contents will appear in the iCloud version of the calendar but this may take some time. You need to leave iCal running until the rotating icon at the top of the sidebar disappears.
You can now delete the 'On My Mac' version of the calendar (control-click it in the sidebar list and choose 'Delete').
You should back up your calendars periodically by exporting the .ics files as in step 1 above and keeping them safely.

Cisco 1812 wireles setup, can't get it to work

Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
end

Okay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now.

I downloaded Office for Mac 2011, and almost immediately my Yahoo email stopped working, most images were disabled throughout my internet sites, and my bank site reported that I was using a "new computer," which is not true. How can I get my email to work

I have an iMac version 10.6.8/2.66 GHz Intel Processor and 4 GB memory, with Safari 5.1.10. I had used Office for Mac 2008 but had to upgrade for work. The download (from Amazon) went swiftly, but when I started Word, it did not function too well. Then about an hour later I noticed that my Yahoo email site stopped working, it lost all images and the text just jumbled up on the left side of the screen. No amount of emptying caches or resets/quits/restarts did anything. I called the Internet support, and they just said it was my iMac that had the problem. I have been reduced to using MacMail as my email, but this is tenuous, as my Yahoo account keeps holding things up and constantly asking me for my password (and sometimes it does not accept it). How can I get my computer back?

The path may be long and tedious, grasshopper.
Actually, the download of Office 2011 for Mac probably was not legal and may have contained bugs or other things meant to make it unstable, or invite a host of issues. The usual path would be Office 2011 for Mac on DVD so you could reinstall it and add the extras from the disc as needed; or fix the installation later on. The updates for security were downloads from Microsoft servers. You'd need a legitmate version with pass code.
Options for Mac and office-like application suites include Libre Office, NeoOffice, and these run free. The latter supports up to Mavericks. 10.9.1 now. They have a word, excel, and other parts a lot like the real office.
If you have a working clone of the system prior to installing the Office 2011 for Mac download and any subsequent and perhaps unseen extras, you could revert to it simply by restarting the computer from the clone, where it resides in externally enclosed self-powered hard disk drive, of a type known to support OS X clones... With ports to help work with most modern Macs. FireWire + USB. Then, clone it back w/ carbon copy cloner.
Short of that, perhaps someone will see your post and offer some indepth method of hunting down bugs via use of Console logs; and maybe booting into Terminal utility to use unix code. It can be rather involved. Maybe Linc Davis will offer some detailed reply that will invite you to read carefully and try it.
I've given up using computers long ago.
A pet raven has been taught to write this.
Good luck & happy computing!

Can't get twitter notifications

I can't get the twitter notifications to work (facebook and mail work).
And everytime I go to twitter.com with Safari, it's asking me if I accept to share it with OSX software.
Anyone has any idea ?
Thx
Message was edited by: aurelien.aries

Check out this article > http://www.businessinsider.com/mountain-lion-twitter-notifications-2012-7
As for twitter.com on Safari.
Quit Safari.
Now open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/LIbrary/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari. Try twitter.com

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I get a song to play automatically on a web page ? iWeb 1.1.2

Can I get a song to play automatically when my web page opens? iWeb 1.1.2

As long as you don't mind doing a little post publish editing of your .js files, it's fairly easy to do. You will find them in this path on your iDisk, using the Go menu in Finder:
Go/iDisk/MyiDisk/Sites/iWeb/Nameofsitefolder/Page_filesFolder/Page.js
Open the .js files for that particular page on your iDisk with any text editor (I like Taco, and it's free) and make the following changes to the script code that controls your movie: (you will find the movie code near the top of the page in the .js file)
Change autoplay="false" to autoplay="true"
Change loop="false" to loop="true"
Changing controller value="true" to controller value="false" will remove the controller from the page entirely. Make these changes in both sets of tags, (object and embed).
Make the changes and just "Save". Clear your browser cache and you should see the changes take effect immediately. Bear in mind you will have to make this modification each time you republish your site. You can also save this modified .js file and replace the republished file with it, as long as no other changes were made to the page in iWeb.
-Mark

Can replies get cached?

Similar Messages

Maybe you are looking for