Can't access internet after updating to firmware 7.3.1

After updating to firmware version 7.3.1, I lost the ability to access the internet. The AEBS thinks it has an internet connection (the light is green), but it does not. I have tried restarting the AEBS and my cable modem router.
I had the same problem with firmware version 7.2.1, and had to revert to 7.1.1.
I'd like to find a solution so that I can make use of Airdisk and Time Capsule.

Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

Similar Messages

  • Can not access BIOS after update BIOS

    Can not access BIOS after update X220 BIOS to version 1.19
    Type: 4290-R32
    BIOS: 1.19
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
    Ask google and try anyway but not work
    - Press ThinkVantage, Press F1, Press Fn+F1
    - Power off, unplug AC, unplug battery, wait 15 miniute, try all again
    - Try to update BIOS again

    That is really weird.
    When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Can't connect to internet after updating new Firmware wrt54g Help please!

    So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

    I am having the exact same problem..  I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help..  It says if you can't access the web based page then to use the TFTP  utility to re-flash the router’s firmware but it seems it cannot make a connection to the router..  I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router..  I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well..  So what gives?  I followed the directions  but the only thing I seemed to accomplish was to brick my router..   Does anyone have a clue on how to go about fixing this problem?   Any help is appreciated.. 

  • Cannot access internet after updating to 4.2.1

    I updated my phone today to 4.2.1 and now I can't access the internet at all.

    Error messages?
    Is the issue with cellular data? Wi-Fi? both?
    Have you done the basics of reset, reboot, restore?

  • I can't access wifi after updating my ipad

    After updating my ipad to the latest ios version I can't access my wifi....

    You are required to provide credit card details to download apps be it free or paid.
    Nothing will be deducted from your credit card if the app is free.
    There will be a authorizing hold of US$1.00 to verify your account information. It will be credited back to your account later.

  • Can't watch movie after updated to firmware 2.0.2

    hi, all,
    after updated to 2.0.2, when i try to watch some movies , the screen showed "the movie could not be played", however, such movies can be played with the firmware is 2.0 and download from itunes store.
    please help, thx.

    This problem can be resolved by rebooting your iPod touch. Hold down the power button and wait for the upper red slider. Then slide it to shut down, and after a minute, click the power button for 5 seconds to boot it up.

  • Can't access Video after updating to IOS 4.2.1

    I have just updated my iPod Touch 2nd gen and now every time I try and go on the Videos I just get a blank white screen, and it returns to the Home Screen.
    Does anyone else have this problem, or know how to get the Videos working?

    Update:
    - after they gave me a new iPod Touch 3rd gen on factory 3.1, I synced and everything worked fine as I stated above (with 5 movies, 15 TV shows and about 1000 music videos).
    - I upgraded to 4.2.1 and same thing happened, pressing music icon gives me white screen for roughly 10 seconds then back to home.
    - I can access videos through music icon however.
    - I then wiped everything and retored to factory on 4.2.1 and synced only Apps, movies, TVS shows... all worked well.
    - When I synced music videos, I did them about 200 at a time this time around. Each time upon completion going back and pressing music icon. As I added more videos the wait time on the white screen after pressing videos icon got noticeably longer, until I got up to about 700-800 music videos, then it would just white screen for 10 seconds and back to home.
    - I then started removing videos and the functionality came back, leading me to believe I have found a repeatable bug, which is what I will discuss with Apple shortly.
    For those of you having the same issue, how many music videos do you have? Through trial and error I have found it to be around the 600-800 mark the video icon stops working.
    Please try removing some of your music videos so you have about 200-400 and let me know if your functionality comes back.

  • After updating the firmware on IOS7 I can not activate my iphone 4.

    After updating the firmware on IOS7 I can not activate my iphone 4. Itunes says "Unlock the iPhone on this ***** @ *******. ru impossible"

    ITunes says:
    At the moment the iPhone is tied to the Apple ID (i ***** @ y *****. Ru). Sign in with Apple ID, which is used to configure this iPhone.
    Unlock iPhone on this I ***** @ ya *****. Ru impossible.

  • TS4268 can't access imessage after downloading latest update on ipod touch

    can't access imessage after downloading latest update on ipod touch-----I click on SIGN IN.   The next page is typing in email address.  click NEXT.    VERIFYING.    It takes me back to sign in page.     What is wrong?          The user if and password are correct so that is not the problem.

    iOS: Troubleshooting Messages
    iOS: Troubleshooting FaceTime and iMessage activation
                                 FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • Double NAT error status after updating to firmware 7.1

    This may be a bug. My Airport Extreme was working perfectly, but after updating to firmware 7.1, with no other changes to configuration, it is now reporting a Double NAT error. Both wired and wireless clients still have access to the WAN and each other, so everything still works. I know I can ignore the error, but I wonder if anyone else has seen this issue?
    I have a possibly unusual setup -
    My DSL modem creates an address of 192.168.1.47 and hands that to the APE as its WAN address. I've configured the APE to hand out addresses to its client machines on the LAN in the 192.168.2.x range and it does that correctly. So there is no actual conflict - the WAN address is 192.168.1.47 and the client addresses are all in the 192.168.2.x range. Could the new software be assuming that the 192.168.1.x range is the NAT range without verifying the actual range is really 192.168.2.x? Seems unlikely, but it appears to be the case.
    Any insights on this appreciated....
    mac mini   Mac OS X (10.4.9)   my Airport Extreme is less than a month old

    When iTunes attempts to sync photos from iPhoto, it shows the amount of the iPod drive taken up with photos, BUT NO usage on the drive graph itself.
    When Sync Photos from iPhoto is deselected and another sync attempted, iTunes asks if photos should be removed from iPod, despite the previous sync being unsuccessful. When I choose to remove the photos, the amount shown taken up by photos disappears.
    Does anyone know what the error message quoted in my question above means?
    iBook G4 1Ghz/iMac G5 iSight   Mac OS X (10.4.3)   iPod Photo 40GB

  • Contacts sort order after updating to firmware 051...

    I am just after updating my E52 with 051.018 Firmware. Before firmware update I done my contacts like this: 01 Val, 02 John, 03 Dad etc... so that when I selected contacts the numbers I most used/dialled come up at the top of the list but now after updating my firmware the contacts at the top of the list are those starting with A  - I have tried going into settings and choosing the order of first name last name but its still the same. I suppose a workaround would be to edit my contacts so that 01 Val becomes AA Val and 02 john becomes AB John but I would really like to keep them as before I updated the firmware if anyone knows a solution. Many thanks,
    Andy.

    The problem was solved. It apparently had to do with DNS server settings. I subscribe to Unblock-US here in Canada, and that messed up communication between the Bravia and the Sony servers. I have my DNS settings set on the router level, so what I had to is to simply bypass the router settings by setting new DNS addresses on the Bravia itself. I used the Google DNS for the Bravia:
    8.8.8.8
    8.8.4.4
    Of course, with this configuration, I can no longer access US content on my Netflix on the Bravia television. What I find strange is that this was never a problem prior to the update, so I guess Sony is locking down on geoblocking with this latest update.

  • Access denied after updating to Adobe reader 11.0.2

    Today I updated to the latest version of Adobe Reader. Afterwords I can no longer use it, it says access denied. I have trioed to remove and reinstall, without solving the problem. I have also checked my Flash Player, but it says that the latest version is already installed. What is this??? I need Adobe reader to work properly ASAP!
    My computer is a HP Pavilion dm1 Notebook and I have Windows 7 home premium installed. And Microsoft Windows.
    Regards,
    Liza

    Hi,
    The error message is: There was an error opening this document. Access denied.
    Both when I click directly on a pdf document in the files and when I try to open from inside the program.
    /Liza
    Från: AdityaKalania [email protected]
    Skickat: den 10 april 2013 00:04
    Till: FamForsberg
    Ämne: Access denied after updating to Adobe reader 11.0.2
    Re: Access denied after updating to Adobe reader 11.0.2
    created by AdityaKalania <http://forums.adobe.com/people/AdityaKalania>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5220864#5220864

  • Camera problems after updating 8100 Firmware to v4.5

    Hi All
    This is a known issue to me as I update all our work handsets with Blackberry firmware for the company I work for.
    After updating the firmware on several handsets to the latest 4.5 version of the Blackberry 8100 there is a problem with the camera.
    When you are in view mode and outside (even whilst overcast) the screen goes white as if the aperture for the lens is open wide.
    Even when you take the picture the result is whiteness everywhere.
    Please see examples here:
    http://www.imagedump.com/index.cgi?pick=get&tp=540100
    and
    http://www.imagedump.com/index.cgi?pick=get&tp=540101
    Both of these pictures were taken indoors with just flourescent lights on.
    However if I return the firmware to a lower level the problem no longer exists.
    I have tried changing the white Balance settings on the handset and no matter which setting I put it on the same results occure.
    I was wondering if there is a patch or do I have to wait for the next version for a bug fix?
    Thanks for your help in advance.
    Gadget
    Solved!
    Go to Solution.

    Upgraded the handset software to 4.5.0.55 and the camera problem no longer exists.
    Can I get Kudos for solving the problem myself?? LOL
    Gadget

  • Cannot longer browse the internet after updated 10.5 to 10.5.8

    cannot longer browse the internet after updated 10.5 to 10.5.8

    Did you repair permissions?
    Did you backup your data prior to installing?
    Are you using any non-Apple routers to connect to the modem?
    Is this with a notebook or a desktop Mac?
    Are there any other Macs with 10.5.8 or newer that can connect?
    Does connecting directly to the modem work via ethernet, or are you on dialup?

  • Can i access internet from my PC to my blackberry using bluetooth?

    Hi,
    Since 8100 doesn't have wifi can we access internet using my PC bluetooth?
    Thanks

    Nope, sorry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for