Can't connect to single sign-on

Installing the 9ias on Red Hat 7.3 is partially successful,
with an important exception: the single sign-on server configuration
assistant fails with a JAVA.UTIL.HashSet error.
Anyone out there been able to put 9ias on Red Hat? Without being
able to connect to single sign-on, application server installation
stops.
I hate to admit defeat, but installing this software is a challenge.
Should you know of a trick to getting single sign-on to work, please
pass it my way.
Bob

I can't access the linked website directly. When I go to the site with other ways, the address bar changes to a lot of different things but I can get in. Thru FIOS, the page just hangs at the first address and times out.
Only error message is err_connection timed out.

Similar Messages

How can i configure firefox single sign-on for urls on citrix environment to affect all users

Hello,
i tried to configure single sign-on on firefox, which is published on our citrix environment and i tried to setup it as per this article "http://support.citrix.com/article/ctx120598" this method and it only applies for a single user, is there any way of doing the config to apply for any user which is loged via citrix session...?
Thank you,
Manoj.

you can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values for all users and profile folders.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0);
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Can I connect a single fp-1001 to two fp-1000's each on seperate cpu's?

Is it possible to poll a single FP1001 from two computers using an FP1000 on each of the computers?

Hi Aaron,
sorry, you're wrong.
Aaron G wrote:
> No. It is not possible. The FP-1000's will transmit any data from the
> RS-232 port onto the RS-485 port.
Have a look at the description. This is as its written in the EIA Catalog
(Electronics Industries Alliance Standards and Engineering Publications).
This Publication is for free: http://www.tiaonline.org
The complete Standard papers can be bought for the price at the end of the
next paragraph.
TIA/EIA-485-A
Electrical Characteristics of Generators and Receivers for Use in Balanced
Digital Multipoint Systems.
(ANSI/TIA/EIA-485-A-98)
This Standard specifies the electrical characteristics of generators and
receivers that may be employed when specified for the interchange of
binary signals in multipoint interconnection of digital equipment. When
implemented with the guidelines of this standard, MULTIPLE GENERATORS AND
RECEIVERS may be attached to a common interconnecting cable.
Product Code 3 Mar, 1998 COMMITEE: TR-30.2
$49.00
> If you wire two FP-1000's together,
> then you risk both of them attempting to drive the transmit line at
> the same time. RS-485 is designed for a single master, it is not
> designed to allow multiple devices to drive the line simultaneously.
>
No, ist definately for multimaster and its half duplex and needs only two
lines.
RS-422 is what you describe, which is full duplex and needs 4 lines.
> You may or may not cause any damage doing it, but you will screw up
> the data transmission if both computers are trying to talk at the same
> time.
IF NI says, their RS485/422 hardware can do RS-485, then damages must be
covered by warranty.
So lets get thing working
Whats wrong:
NI sometimes write RS-485, but infact means RS-422.
Sample: Measurement and Automation Catalog jan. 2002, page 505 ( Or have
take a look in the contents of the catalog at "Distributed I/O",
"Field-Point".
There is a picture showing connections between a computer- RS-232-
FP-1000-RS-485- 2 FP- modules.
At this place things are wrong, because cabeling is 4- wire and true
RS-485 is 2 wire!
Whats correct:
Othertimes NI knows and also writes the correct pinout of connectors and
cabeling of RS-485:
Sample: NI Serial Device User Manual of my ENET-485/4, Appendix D, Serial
Port Information.
At the chapter RS-485, They write: "Unlike the RS-422 standard, RS-485
adresses the issue of using multiple transmitters on the same line. RS-485
can also withstand multiple drivers driving conflicting signals at the
same time."
Other NI- Serial Port device manuals may contain similar texts.
So here's the solution:
If NI says FP-modules can handle RS-485 and there are only 4 connection
cables for the network connection, then one has to bridge TX+ with RX+ and
TX- with RX-. In this way you just have 2 network wires left. When doing
this, RS- Network devices may handle this situation automaticly, or they
have to be configurated.
For my ENET 485/4, this means:
4-wire RS-422: Serial Port config: Tranceiver mode = 4 wire
2-wire RS-485: Serial Port config: Tranceiver mode = 2 wire TxRdy Auto
So how should involved RS-485 devices behave:
By default, RS-485 all active devices of a network are in Read- mode, so
there are no conflicts. If one device wants to write to the bus, ist
switches its tranceiver to write mode, writes the data to the bus and goes
back to read mode again. The tranceiver switching time from read to write,
or back from write to read, should take 400 �seconds each. People working
with labview have to insert 1ms delay if they want ro read data from the
serial port, after writing.
See National Semiconductor application notes:
http://www.national.com/pf/DS/DS36C278.html#Application Notes
Some timing info, look AN-702 at
http://www.national.com/appinfo/interface/0,1801,121,00.html
My National Instruments ENET-485/4 (Ethernet to 4-port RS-232/422/485)
needs 20ms (= 50 X 400�s) though. The Ni- Support couldn't help me in this
case yet. I don't know how NI-PCI-Serial Port cards behave, but I used a
dozen of RS-232/485 Converter of Adlinks NuDAM series: ND-6520.
http://www.adlink.com.tw/products/RemoteData/ND-6520102130.htm
They work perfect, connected right to the PCs- serial port. They can
handle RS-485 and 422.
In the future, if NI can't get my ENET-485/4 do work with correct timing,
I'll try MOXA http://www.moxapartner.com/ .
Well, this was lots of technical RS-xxx info.
Rainer Ehrt

Can I have a single sign on pass word and ID for FireFox Sync and Accounts?

I can't keep my ID's and Password's organized for Firefox Accounts, Firefox Sync and Mozilla. Some how I've used two different email accounts and they have different passwords.
I'm using a MacBook with OS X 10.1.1 and FireFox 34.0

Firefox Accounts and Sync do use the same email address (username) and same password. It's one service - Sync uses Firefox Accounts for web login.
As far as "Mozilla", do you mean this forum?
You may use the same email address and same password, but the various Mozilla websites and services do use separate registration and login databases; none are connected with other websites.

HELP needed on Single Sign on

can any one give me some reference documents or reference links which can be used
for single sign on to the Portal server and to several other applications.
I need also some documents which should be able to connect to an AS400 application
and to a peoplesoft application thro' my portal.
plz help me in this regard. i really don't have any idea regarding this and i
have been asked to do this. plz send me the documents which should clearly explain
everything
Thanx in Advance
Prasanna

Hello Prasanna,
There is a new code sample on dev2dev ( http://dev2dev.bea.com/index.jsp ) that
shows how to modify the login framework for Portal to support single signon. This
code example modifies the security and portal webflows to allow you to plug in a
custom login implementation.
The example is called "WebLogic Portal Login Framework" and it is located at
http://dev2dev.bea.com/code/codedetailcontent.jsp?productType=weblogic+portal&codeType=code+sample&filepath=components%2Fdev2dev%2Fcodelibrary%2Fcodesamples%2Fcodesample_wlplogin.htm
Prasanna wrote:
can any one give me some reference documents or reference links which can be used
for single sign on to the Portal server and to several other applications.
I need also some documents which should be able to connect to an AS400 application
and to a peoplesoft application thro' my portal.
plz help me in this regard. i really don't have any idea regarding this and i
have been asked to do this. plz send me the documents which should clearly explain
everything
Thanx in Advance
Prasanna--
Ture Hoefner
BEA Systems, Inc.
4001 Discovery Drive
Suite 340
Boulder, CO 80303
www.bea.com
[att1.html]

NCO and Single Sign On

Hello,
Please could someone explain how I can get my windows application to connect via single sign on. Currently the application gets the necessary connection string from the SAPLOGON.INI file (via the SAPLogonDestination) and attempts a connection after requesting client, username, password and language. Someone would like to use this application in their work environment (single sign on via Microsoft NTLM) and I wanted to know what needs to be done to implement this.
Thanks,
Charles

There is quite a bit of information available in the NCo 2.x documentation (available in the VS online help): There is a whole chapter about SSO.
Here are the steps in short:
- You need a so-called GSS-provider that is install on both sides, client and SAP-Server.
- For Windows the easiest solution is to use GSSNTLM or GSSKERB5 (for NTLM or Active Directory based SSO).
- You need to configure the the provider on server side with some profile paramters and at the client side with some environment variables. OSS note 595341 contains the W2K-GSS-Provider as an MSI-Package that automatically sets the variables on client side.
- Make sure that SSO works with SAPGUI.
- Now you can use SSO also from NCo, by removing the password from the connection string and adding SSOPartnerName.

Single sign on and microsoft active directory

Hi,
I have EBS 12.1.3 on linux. I know that I can implement single sign on to login to EBS. Now the question is: can I integrate this single sign on with my existing Microsoft Active Directory? Can you send me some links or documentation?

Self-reply:
http://blogs.oracle.com/stevenChan/2006/05/indepth_using_thirdparty_ident.html
Thanks

ADFS single sign-on with office 365 and multiple forests

I have 2 forests with one of them (Forest A) only running Exchange / Office 365 in hybrid mode. The other forest (Forest B) has my AD accounts for everyday user login and work. Is there a way to set up ADFS between these 2 forests in order for Forest B
to achieve single sign-on to office 365? Today users have to login with separate office 365 accounts in order to access email and sharepoint. Short of migrating Forest A into Forest B and getting down to one forest / domain, is there anything else we can do
to achieve single sign-on?

Hi,
Based on my research, we can have one ADFS farm servicing multiple forests, here are some related articles below for your references:
Multi-forest and Multi-tenant scenarios with Office 365
http://blogs.technet.com/b/educloud/archive/2013/08/02/multi-forest-and-multi-tenant-scenarios-with-office-365.aspx
Hybrid Deployment Prerequisites
http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
SupportMultipleDomain switch, when managing SSO to Office 365
http://blogs.technet.com/b/abizerh/archive/2013/02/06/supportmultipledomain-switch-when-managing-sso-to-office-365.aspx
For more information about Office 365, I suggest you refer to Office 365 community below:
http://community.office365.com/en-us/f/default.aspx
Best Regards,
Amy

Can I connect my Sony DCRHC42?? USB not compatible, and no firewire!

I'm so frustrated - I used my Sony DCRHC42 camcorder with my old iMac and it was great - but now I find I have no way to connect it to my MacBook. The USB is not compatible and this computer doesn't have a firewire port! Is there a work around?

Ok, since both are "n"s then you have two basic choices to enable the 802.11n AirPort Express Base Station's (AXn) Ethernet port to connect to the TV: 1) Configure the AXn as a Wireless-to-Ethernet bridge (ProxySTA), or 2) Configure the AXn to extend the wireless range of the 802.11n AirPort Extreme Base Station (AEBSn).
If you don't really have a requirement to extend the wireless range of the AEBSn, I would suggest that you go with the first option: ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.) Configured as a ProxySTA, the AXn connects wirelessly to the AEBSn's wireless network and its Ethernet port is enabled. You can then connect a single or multiple Ethernet clients (using an Ethernet switch) to this port for network/Internet access.

Single sign on wich 802.1x using MS IAS

Hi!
can i do a single sign on using 802.1x authentication and dynamic vlans? Im using MS IAS Radius server an a WIndows XP client.

This should help:
http://www.microsoft.com/downloads/details.aspx?familyid=05951071-6b20-4cef-9939-47c397ffd3dd&displaylang=en
In summary, you need machine-authentication, and the native supplicant will re-use windows credentials at login, link-up, etc. without prompting the use again.

Dialog work process and single-sign on

Hi,
I have read that we should have atleast 2 dialog work processes configured.
can anyone tell me the reason why?
what is the concept behind single sign-on?
much appreciate ur help.
regards,
swaroop.

Hi Swaroop,
I have never heard of something like that before...
You can read more about single sign on here,
https://www.sdn.sap.com/irj/sdn/itpractices?rid=/webcontent/uuid/01c62876-0a01-0010-f5a5-d39e7651b9fd [original link is broken]
and here,
http://help.sap.com/saphelp_nw04/helpdata/en/94/695b3ebd564644e10000000a114084/frameset.htm
Regards
Juan
Please reward with points if helpful

Where can i find DPS single edition serial keys?

I have purchased 2 digital keys. Then, I have used them with viewer builder. On the web, I'd like to confirm 2 keys, again.
but I can't find them. My orders, Histories, ... All menus are empty.

hello
Could any one tell Where can i find Oracle9iAS Single Sign On API (Javadoc) for SSO SDK ? we still use iAS 1.0.2.2, loading ssosdk307_032101.zip from OTN, we find doc/oracle/security/sso/enabler
Regards,
Mohammed Amin hope it helps
michael

R3 systen connection error and Single sign on probelm in QA BW system

Dear all
Last two week back we have migrated the QA BW system to HA environment by using the system copy method (backup/restore method), after that we are facing two issues.
1. In RSA1 go to Source system select the R3 system, then right click and then select the check after that we are getting below error message.
BI unknown in source system
BI IDoc type ZSQB007 is not the same as source system IDoc type
The following errors occurred in the source system
Incorrect IDoc type ZSPA014 in the ALE definition of the source system
2. We have connected our QA portal to BW system by using the single sign on for that we have to reload the single sign on certified both place ( Bw and EP side ) ?
Kindly guide us
Regards
Sriram

Hi bhuban
Thanks for you reply
In My case we have do the system copy from Qa standalone to High available Cluster environment (both Hardware are different), in that I am not go to change the logical system and all RF C's. It will remain same because of in our Z development they are hot code the system Name. From source system I can able to log in the BW system in other way its give error message.
Kindly support us
Regards
Sriram

Make an app that connect to MSSQL server by single sign on

A straightforward task. I want to create an GUI app that can connect to MSSQL 2014 express when user run it.
Lets say a domain user name "peterpan" was grant modify right of certain database in SQL server.
After user login Win7, then run the app. It auto log on to the SQL server and show a list of database for choose to modify.
The problem is i cant find any info about single sign on vc++ code/library for reference.
The app is plan to written by vc++ with MFC, ATL. Are these libraries has the method to do want i want?

>Could you elaborate?
Sure. Here's the high level of 20 years of history of Microsoft data access APIs :)
First there was ODBC, which is still the most widely-used and adopted API for data access from unmanaged code.
Then various COM (Component Object Model) wrappers and new libraries were introduced, including ADO, DAO, and RDO which were all higher-level wrappers meant to simplify data access. And OleDB was introduced which is a COM low-level data access API,
similar to ODBC.
When .NET was introduced in 2003, it came with a new data access API, called ADO.NET which is the preferred API for .NET (or "managed") code. The ADO.NET Provider for SQL Server (System.Data.SqlClient) is not based on ODBC or ADO. It's
a ground-up managed client for SQL Server.
Later the OleDB provider for SQL Server was
deprecated, and a new SQL Server ODBC Driver was released. Leaving ODBC as the preferred API for unmanaged C++ development.
See also Data Access Technologies Road Map, which is a few years old, but explains what lots of the older data access technologies were.
David
David http://blogs.msdn.com/b/dbrowne/

Oracle Single Sign on JSP Database Connection

I am writing a JSP Search Screen that launches off of Oracle Portal (behind SSO). What I'm looking to do is have the JSP connect to the database as that user, and then show the information available to that user (we have this handled by a VPD). I was wondering how I could get access to the single signon RAD in order to connect to the database from within my JSP. Any help would be greatly appreciated.

Hi Darsh,
1. Oracle Internet Directory (OID) is Oracle LDAP storage solution (more here), Oracle Virtual Directory is Oracle solution that can read identity data (and filter it (mask it) based on policies) from Oracle/non-Oracle databases, Oracle/non-Oracle Directories and files and provide the user profiles as LDAP view (more here), There is nothing called Oracle Active Directory, you must be referring to Microsoft Active Directory.
2. No, Oracle Single Sign On (OSSO) is a feature in iAS (its obsolete), Identity Management is wide umbrella of solutions and concepts.
3. Oracle Access Manager is one component of Oracle Identity and Access Management suite of products.
4. Webgate is Oracle access Manager agent that is installed on a webtier, it intercepts the web requests and collect the credentails, send them to Oracle Access Manager for security evaluation (decide what Authentication is needed, verify collect credentials, etc), webgate then enforce the Access Manager decision.
5. Oracle EBS AccessGate is a java application that has the same use of OAM Webgate (it is OAM agent) but specific to E Business suite, EBS Access Gate is the new solution replacing OSSO agents, OAM is replacing OSSO server component, EBS and OSSO customers can use OAM server with OSSO agents, or with EBS AccessGate.
HTH.
Ghassan

Can't connect to single sign-on

Similar Messages

Maybe you are looking for