Can't create a pl/sql-report
Hi,
after upgrading from Apex 2.0 to 3.0.1 I 'm not able to
create even a simple dynamic report.
I created a static select list P1_X: STATIC2:1;1,2;2
in a report-region.
Region-Type:PL/SQL function body returning a query
here's the query:
declare
x varchar2(1000);
begin
if nv('P1_X') = 1 then
x := 'select 1 from dual';
else
x := 'select 2 from dual';
end if;
return x;
end;
when I select 1 then I get an error: ORA-01403: no data found
when I select 2 the report shows 2 like expected.
the TRUE-part of the if-clause will not be processed,
when I change the if condition to 1 = 1 then the TRUE-part works.
imported applications, created with Apex 2.0 and with very complex
dynamic reports run without any errors.
Even in the Apex-Account I get the same error.
What's wrong?
Thanks for help
lothar
Lothar,
I like the fact that you set up a simple test query to figure out what your problem is. Read this article here...
http://inside-apex.blogspot.com/2006/12/drop-in-replacement-for-v-and-nv.html
and you may want to stop using the V and NV functions by switching to bind variables. Your query would then look like this...
declare
x varchar2(1000);
begin
if :P1_X = 1 then
x := 'select 1 from dual';
else
x := 'select 2 from dual';
end if;
return x;
end;Give that a try and tell me what you get. If nothing else it takes another part (function) out of the equation to isolate the issue.
Dan
Similar Messages
-
Can't create a new SQL Reporting Server
I am trying to create a new reporting server. I was able to create one earlier in the day but it was tied to the wrong subscription (not the one my databases were in).
So I tried to create another one attached to the right subscription and I am unable to I get the following error no matter what I put in for Username/password.
Error Code: InternalServerError; Error Message: Log on failed. Ensure the user name and password are correct. Tracing
ID is: f472bbc5-aa4b-4af8-b12e-72a7746db9f1. Machine name is SQL0ABAA615. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. Ensure the user nam
I removed the bad one and still get the same message. I have tried using the admin account, the account that was used to create the initial server my account (which is an admin account) and also just creating a new login/pwd combination nothing works.
Any ideas or help would be greatly appreciated.
ChuckThanks for your question. Unfortunately we are in the process of deprecating SQL Reporting services. Full details are available at http://msdn.microsoft.com/en-us/library/gg430130.aspx
Thanks Guy -
Can we create purchase order through report programming?
hi experts.....
can we create purchase order through report programming?If yes plz give me the thread details?Hi,
Use this code in a program by using a BAPI function module
Anothe rway is using classical/ALV report using call transaction from a report for changing the PO
loop at i_header.
header-ref_1 = i_header-legacy.
headerx-ref_1 = c_x.
header-doc_type = i_header-bsart.
headerx-doc_type = c_x.
header-comp_code = i_header-bukrs.
headerx-comp_code = c_x.
header-purch_org = i_header-ekorg.
headerx-purch_org = c_x.
header-pur_group = i_header-ekgrp.
headerx-pur_group = c_x.
header-vendor = i_header-lifnr.
headerx-vendor = c_x.
concatenate i_header-bedat+4(4)
i_header-bedat+0(2)
i_header-bedat+2(2)
into header-doc_date.
headerx-doc_date = c_x.
header-created_by = i_header-ernam.
headerx-created_by = c_x.
header-currency = i_header-waers.
headerx-currency = c_x.
concatenate i_header-kdatb+4(4)
i_header-kdatb+0(2)
i_header-kdatb+2(2)
into header-vper_start.
headerx-vper_start = c_x.
loop at i_items where legacy = i_header-legacy.
item-po_item = i_items-ebelp.
itemx-po_item = i_items-ebelp.
itemx-po_itemx = c_x.
if i_header-bsart = 'NB'.
item-material = i_items-ematn.
itemx-material = c_x.
schedule-quantity = i_items-menge * 1000.
schedulex-quantity = c_x.
else.
item-short_text = i_items-ematn.
itemx-short_text = c_x.
item-matl_group = '1000'.
itemx-matl_group = c_x.
schedule-quantity = '1'.
schedulex-quantity = c_x.
endif.
item-plant = i_items-werks.
itemx-plant = c_x.
schedule-po_item = i_items-ebelp.
schedule-sched_line = '1'.
schedulex-po_item = i_items-ebelp.
schedulex-sched_line = '1'.
schedulex-po_itemx = c_x.
schedulex-sched_linex = c_x.
concatenate i_items-eildt+0(2)
i_items-eildt+2(2)
i_items-eildt+4(4)
into schedule-delivery_date.
schedulex-delivery_date = c_x.
item-price_unit = i_items-peinh * 100.
itemx-price_unit = c_x.
item-tax_code = i_items-mwskz.
itemx-tax_code = c_x.
item-shipping = i_items-evers.
itemx-shipping = c_x.
account-po_item = i_items-ebelp.
accountx-po_item = i_items-ebelp.
accountx-po_itemx = c_x.
if i_header-bsart = 'FO'.
item-pckg_no = sy-tabix.
itemx-pckg_no = 'X'.
limits-pckg_no = sy-tabix.
limits-limit = i_items-overalllimit.
limits-exp_value = i_items-expectedoverall.
posrvaccessvalues-pckg_no = sy-tabix.
posrvaccessvalues-line_no = '0'.
posrvaccessvalues-serno_line = '00'.
posrvaccessvalues-percentage = '100.0'.
posrvaccessvalues-serial_no = '01'.
account-serial_no = '1'.
accountx-serial_no = '1'.
accountx-serial_nox = c_x.
account-quantity = '1'.
accountx-quantity = c_x.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = i_items-kostl
importing
output = account-costcenter.
accountx-costcenter = c_x.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = i_items-sakto
importing
output = account-gl_account.
accountx-gl_account = c_x.
item-acctasscat = i_items-knttp.
itemx-acctasscat = c_x.
item-item_cat = i_items-epstp.
itemx-item_cat = c_x.
endif.
append:item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
clear :item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
endloop.
call function 'BAPI_PO_CREATE1'
exporting
poheader = header
poheaderx = headerx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
importing
exppurchaseorder = ponumber
* EXPHEADER =
* EXPPOEXPIMPHEADER =
tables
return = return
poitem = item
poitemx = itemx
* POADDRDELIVERY =
poschedule = schedule
poschedulex = schedulex
poaccount = account
* POACCOUNTPROFITSEGMENT =
poaccountx = accountx
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
polimits = limits
* POCONTRACTLIMITS =
* POSERVICES =
posrvaccessvalues = posrvaccessvalues.
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
if ponumber eq space.
loop at return where type = 'E'.
clear buffer.
move-corresponding return to e_return.
concatenate i_header-legacy e_return into buffer.
transfer buffer to p2_file.
endloop.
move-corresponding i_header to i_eheader.
transfer i_eheader to p3_file.
loop at i_items where legacy = i_header-legacy.
move-corresponding i_items to i_eitems.
transfer i_eitems to p4_file.
endloop.
else.
commit work and wait.
endif.
clear:ponumber,header,headerx,item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
refresh:item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
endloop.
close dataset p2_file.
close dataset p3_file.
close dataset p4_file.
Regards
Krishna -
When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized. Can't create record file, Please Report" I press O.K. and this pops up - "Error occurred Result= -48". Can't figure out why. First time I have every had problems> What's up with this?
a -48 error is a duplicate filename.
the first things i'd try are the oddball problems fixes:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Create Simple Printable SQL Reports in APEX 3.2 Without a Print Server
Oracle Apex 3.2
Oracle 11g
OHS
I thought I'd post an answer on how to get a printable SQL report in Oracle Apex without having to configure a print server. I'm sure that similar things have been posted in various other places, but I found the documentation for using custom row templates (to create a printable report) to be incomplete at best. For my needs, I was not looking for an awe inspiring report printout, but rather simple directory information printouts. For example, if you wanted a printable report to look like this:
=================================
CURRENT ACTIVE EMPLOYEES REPORT
=================================
First Name: Bob Employee ID: 0000000000
Last Name: Swarts Company Credit Card Number: 0000-0000-0000-0000
Middle Initial: F Social Security Number: 000-00-0000
First Name: Sue Employee ID: 1111111111
Last Name: Johnson Company Credit Card Number: 1111-1111-1111-1111
Middle Initial: G Social Security Number: 111-11-1111
etc.....In MS Access, doing this is very easy. From what I understand, this is also very easy to do this using PDF software with a print server. However, if you are like me, you don't want to waste time and money by obtaining and configuring a print server (even if it is free). However, never fear because you can create simple reports like this with relatively minimalistic effort; and you can do so without having to configure a print server.
1.) Create a new page
2.) Create a new sql query report region on the page
3.) Make your query just as you would normally.
For this example the query would be:
select first_name, employee_id, last_name, company_credit_card_number, middle_initial, social_security_number from employee_table4.) Go to "Shared Components"
5.) Under "User Interface" click on "Templates"
6.) Click on the "Create" button
7.) Select "Report"
8.) Select "From Scratch"
9.) For the "Template Class," choose one of the "custom" classes. For the "Template Type," choose "Named Column"
10.) Click the "Create" button
11.) Now that you created a custom row template, go back to "Shared Components" and then to "Templates"
12.) Find your custom template and click on it
CUSTOM TEMPLATE HOW TO
1.) In the "Row Template 1" textbox, you are going to create some custom css that will display the data on the page. The css to make the report look like the report above would be:
<div style = text-align: justify">
<table>
<tr>
<td style = "width: 200px"><b>First Name: #1#</b></td>
<td style = "width: 225px"> </td>
<td style = "width: 215px"><b>Employee Id: #2#</b></td>
<tr>
<td style = "width: 200px">Last Name: #3#</td>
<td style = "width: 225px"> </td>
<td style = "width: 215px">Company Credit Card Number: #4#</td>
<tr>
<td style = "width: 200px">MI: #5#</td>
<td style = "width: 225px"> </td>
<td style = "width: 215px">Social Security Number: <b>#6#</b></td>
</tr>
</table>
<p style = "page-break-after: always">----------------------------------------------------------------</p>
</div>
{code}
As you probably figured out, the numbers between the two pound signs ("#") are substitution strings for the variables in your select query in the SQL report. As you have also probably noticed, the "page-break-after: always" line will always make it so that only one report is shown on a page. To fix this, we will need to use logic and row template 2.
2.) For the "Row Template 1 Condition," select "Use Based on PL/SQL Expression" from the select list.
3.) In the textbox for the row template 1 expression enter in the following: {code}substr('#rownum#',-1) = 0 or substr('#rownum#',-1) = 5{code}
***** This condition will make sure that this template is applied when the last digit in the row number is either a "0" or a "5." So, only 5 reports will be displayed per page.
4.) Now go down to "Row Template 2" and enter in the following in the textbox:
{code}
<div style = text-align: justify">
<table>
<tr>
<td style = "width: 200px"><b>First Name: #1#</b></td>
<td style = "width: 225px"> </td>
<td style = "width: 215px"><b>Employee Id: #2#</b></td>
<tr>
<td style = "width: 200px">Last Name: #3#</td>
<td style = "width: 225px"> </td>
<td style = "width: 215px">Company Credit Card Number: #4#</td>
<tr>
<td style = "width: 200px">MI: #5#</td>
<td style = "width: 225px"> </td>
<td style = "width: 215px">Social Security Number: <b>#6#</b></td>
</tr>
</table>
<p>----------------------------------------------------------------</p>
</div>look familiar? that is because it exactly the same code as above, except without the page-break-after piece.
5.) For the "Row Template 2 Condition," select "Use Based on PL/SQL Expression" from the select list.
6.) In the textbox for the row template 2 expression enter in the following: substr('#rownum#',-1) != 0 or substr('#rownum#',-1) != 5***** This condition will make sure that this template is applied when the last digit in the row number IS NOT a "0" or a "5."
7.) Scroll down to column headings and enter this in the textbox for the "Column Heading Template": OMIT
8.) Click the "Apply Changes" button
9.) Now go back to your application and the page you want to apply the custom report to
10.) On the report, click on the report tab
11.) Scroll down to "Layout and Pagination"
12.) Click on the "Report Template" select list
13.) Select your custom template
14.) Click the "Apply Changes" button and run the page
Try printing the report, if it does not print correctly, try it in Opera, Safari, Internet Explorer, Firefox, and Google Chrome. Please note that it is my understanding that only Firefox does not understand the css "page-break-after: always"
If needed, add some css to the page to hide tabs and other items when you print.
~Andrew SchulltzDOH. Too much copy/paste.
In my code, I was setting an application variable to contain the email address I was retrieving from AD. Once commented out, it worked fine.
IF l_attr_name = 'mail' THEN
APEX_UTIL.SET_SESSION_STATE('F111_USER_EMAIL',l_vals(i));
END IF; -
Can I create one single crystal report using 2 bex queries
HI all,
I have 2 bex queries and has to develope a single crystal report .Is it possible???? If so, than how to connect two bex queries and develope one single crystal report.Any other option is also fine. I mean ....no need to use crystal..( I can go for one single webi..).But need to know the approach ...
or else...can I create universe on 1 bex and other universe on other bex ..and go for one single webi report..
Only problem is client is particular about one single report(either crystal or webi)
if i go for webi ...I know we can use link universe option but I dont know whether it works fro OLAP environment.
Please let me know if I can link OLAp universes and go for 1 single webi report.
Any help is appreciated.
Thanks in advance,
MahathiYou can use either CR or WebI.
In CR Designer create the report using the SAP toolbar (Create report from query) based on the 1st BEx query. Then use the Database expert (first entry in the Database menu) to add an additional connection to your 2nd BEx query (+Create new connection->SAP BW DX query). You can then join the results of the 2 different queries in the database expert also.. Please note that if you do NOT want to join the result sets, then it is more efficient to use subreports. Create two different CR reports, each based on one of the BEx queries and then use one of those as your main report and insert the other one into it as subreport. Once embedded you do not have to keep the separate .rpt file of your second report.
For Webi you must build 2 universes, each based on one of your BEx queries. In your report you can add multiple queries based on different universes. You can join the results sets here by using the Merge dimensions button in the report editor area.
Regards,
Stratos
PS; Keep in mind that joining a large number of rows at report level (either in CR or WebI) can cause performance problems. If this is your requirement, how many rows do you expect to get back from each individual query? -
Can't create a new SQL Azure Standard Tier db
I'm having an issue creating a new sql azure standard tier db. Here's the basic steps I've done to migrate a web tier db.
Register for the sql preview programme
https://account.windowsazure.com/PreviewFeatures
Perform a db export to blob storage
use the + (new) button to create a new SQL db
select the import option
browser to your saved export
hopefully see the new tiers as options in dialog.
The new tiers require a separate server to web. Can create this from the import dialog
I have 2 independent azure accounts, the above process worked for my test account but for the live account where I was also experimenting after success on the test account I hit an issue. I request to create a new server whilst importing. This step seems
to work but then the actual import fails with this msg
"Error encountered during the service operation.
Could not import package.
Error SQL72014: .Net SqlClient Data Provider: Msg 40823, Level 16, State 1, Line 1 Invalid value provided for parameter EDITION. Please provide a value that is valid on server version 1.0.
Error SQL72045: Script execution error. The executed script:
CREATE DATABASE [$(DatabaseName)] COLLATE SQL_Latin1_General_CP1_CI_AS
(EDITION = 'Standard', MAXSIZE = 1 GB)"
Tried a couple of times but no joy. Using the portal I can browse to the new sql server and it looks okay other than the list of ENABLED
RESERVATION SIZES ONLY HAS P1, P2, P3 I'm requesting a standard (s1) db not premium (P1, P2, P3). On my test server I see in this list also S1,
S2. As you can see in the error message I'm requesting Edition = Standard. I get the feeling the newly created server is not accepting standard tier dbs?
Now the server is created if I try an import I see the server in the list of available servers but when I select a tier of Basic or Standard the new server is grayed out, not so if I select Premium or the older Web or Business? Interestingly my current live
sql server shows up as supporting the new premium?
Thanks
WayneHello,
Glad to hear that the issue resolved and thanks for your sharing.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Want to create Searchbar on SQL report
Hi evryone...
I had created SQL report in my appication.......But i coould nt find serch bar option which generally create with interactive report...so if i would like to create serchbar in my SQL report then how could i able to do that thing??
thanks in advance
rommyHi Rommy,
Have a look at my first post in this thread: Re: Search option for a REPORT AND FORM page.
Regards
Andy -
ActiveX can´t create the object xl reporter
hola tengo SAP BO 2005
con el xl reporter ahora que lo quiero correr me aparece el error de que el ActiveX can´t create the object
probe reinstalando todo y nada, asi como cambiando el dll de los lenguajes
alguna otra sugerencia
graciasEstimado Salvador,
Gracias por remitir su inquietud al soporte de SAP B1 en español.
Inicialmente le pedimos verifique que esta utilizando una versión soportada de Microsoft Office. Tal y como se documenta en el Service Market Place:
https://service.sap.com/smb/sbo/platforms
Si cuenta con alguna de las versiones soportadas, verifique lo siguiente :
El mensaje de error podria estar relacionado a el DI API. Favor aplicar los siguientes pasos:
1. Ubicar el archivo '"temp" por medio de Start -> Run , tipear %temp%.
2. Ubicar la carpeta SM_OBS_DLL folder y borrarla.
3. Desde añadir/remover programas, desinstalar el DI API.
4. Reiniciar el PC.
5. Instalar el DI API desde la carpeta del parche en uso (en la carpeta "packages")
Esperando lo anterior les permita solventar lo reportado.
Queda a sus gratas ordenes,
Juan Manuel Marrero
SAP Business One Forums Team -
How can i create a string sql?
hi.. i am newbie for oracle. I have an easy question.
I will create a dynamic sql.
Such as:
vName:='MYDIR';
path:='C:\ORACLE\';
sqlStr:='CREATE OR REPLACE DIRECTORY ' ||vName|| ' AS ' ||path||;
so the output of string must same :
CREATE OR REPLACE DIRECTORY MYDIR AS 'C:\ORACLE\';
the ' character must placed in string. How can i do this? With q'?
then, i must run this sql string. But how can i do this execute immediate?
thanxAn example :
SYS@db102 > set verify off
SYS@db102 > declare
2 sqlStr varchar2(100);
3 begin
4 sqlStr := 'create or replace directory '||&1||' as '||chr(39)||&2||chr(39);
5 dbms_output.put_line(sqlStr);
6 execute immediate sqlStr;
7 end;
8 /
Enter value for 1: 'mydir'
Enter value for 2: '/home/oracle/work'
create or replace directory mydir as '/home/oracle/work'
PL/SQL procedure successfully completed.
SYS@db102 > -
Error run-time 429 ActiveX can't create the object Financial Reporting
Hi everybody,
I'm trying to run Financial Reporting 9.3.1 on my pc with Winodws Vista but as I launch the exe it shows me an error message:
Error run-time 429 ActiveX can't create the object
I know it works out with XP. Is there a problem with Vista? How can I fix it?
Thanks in advance
GiacomoI cannot say this IS your problem, but some oddities I ran into installing the report client on my laptop in my current environment ....
#1 - Even though you type in your username and password in the Reports login box, it apparently uses the credentials of the logged on user.
#2 - The machine MUST be on the domain that is used for authentication or it flat out won't work (see item #1)
#3 - I ran into the ActiveX error once and apparently something did not register properly during the install. To fix it :
Run the batch file : %HYPERION_HOME%\BIPlus\install\bin\HRRunAnt.cmd
Where %HYPERION_HOME% is the main hyperion folder. (i.e. c:\hyperion )
After the script executes, reboot your machine. You MUST reboot.
Hope that helps. -
Can't create valid PL/SQL stored procedure
I have two questions about PL/SQL and JDBC:
Question 1: I'm trying to create and execute a PL/SQL stored procedure, and I can't seem to get the syntax right. I'm trying to create the simplest stored proc I can. Here's the stored procedure:
create or replace procedure test( inParam char(20) ) is
begin
select inParam from dual;
end;
When I try to execute it, I'm getting the error:
PLS-00905: object TEST is invalid
The creation of the proc, and the execution are being done using the same login.
Question2: Once I get the stored procedure created, I want to call it from a JDBC application. Is this the correct syntax:
CallableStatement stmt = connection.prepareCall("begin test('abc'); end;");
or can I use the standard JDBC escape sequence:
CallableStatement stmt = connection.prepareCall("{ call test('abc'); }");
Thanks for your help,
JeffForgot to mention, I'm using TimesTen 11.2.1.4.
-
Can I create an exe with report gen addon using office 2000 and run it on a PC with XP?
I have create an executable using the report generation toolkit on a PC that has Office 2000. When I load the executable on a PC with office XP, It will not launch excel. Should the exe be compatible with either version of office? What do I need to do to make it work on both versions?
Hi Budman,
You should have created the executable in the way as is described here.
On your target machine you have to use the _wordsub.llb resp. _excelsub.llb which belongs to the MS Office version of that machine. The different versions are on the installation CD of the toolkit.
If you have these files in the support directory you do not need to create different exes for different MS Office versions.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions -
How can I create something like the "Report Attribute" screen?
Hi, all,
I know this is a little bit vague. If we edit a report, we will see the parent level tab on the top, as "application builder, sql workshop, administration". Right below the tab, we have the breadcrumb. Then second level tab "Region definition, "Region attribute" is under the breadcrumb. This is the interface I'd like to have. The application is using theme 12.
Thanks for inputs.Thanks Vikas. I got the zip file.
Would you please also take a look at this question?
Whether it is possible through plsql to change parameters of the chart?
I only want to adjust the min and max of the built-in SVG chart. Now the min of 'Value' axis always starts with zero, which is soooo inconvenient. -
Can't create connection in SQL developer
hi,
i download sql developer from oracle website but when i want to start and start it with making new connection it always give me error saying
test faild IO error: the network adapter could not estabilished a connection
please help
i am using windows vista 32bit OSHi Saqid,
If you performed a default Oracle 10g Express Edition installation on your local machine, then you should find something like the following:
Services:
OracleXEService Started Automatic
OracleXETNSListener Started Automatic
TNSNAMES.ORA file entry:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
You should be able to do the following from a Windows command prompt and get similar results:
C:\>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 14:53:17 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn system
Enter password:
Connected.
SQL>
SQL> quit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
C:\>
C:\>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-JUL-2011 14:22:35
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)
(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (50 msec)
When your installation works correctly for these commands, then the SQL Developer connection should work as well. If not, please provide specific installation and machine details. But first you need to verify using sqlplus and tnsping that the 10g installation is working correctly. If not, then please post to the appropriate forum for help in that area.
Regards,
Gary Graham
SQL Developer Team
Maybe you are looking for
-
Acrobat X Pro 10.1.12 Mac Yosemite OS X 10.10.1 Acrobat now crashes when attempting to use arrow keys to navigate. This is true on both MacBook Pro 15 retina and Mac Pro.
-
I need help. I have completed my video and now realize it is too big for a single DVD. Is there a way I can split the video and not lose the current info so I can put video on 3 different disks? Thank You pbcatt
-
Since i updated to 10.8.4, i've noticed the fan is running almost constantly on my Macbook Air (11-inch, Late 2010) and the computer gets very hot. I looked in Activity Monitor and saw that both Safari and Finder were using CPU, but it's by no means
-
Printing problem from photoshop
Hi, I moved from a PC to an iMac in February this year - and up till now things have been going well. Here is the problem: I'm trying to print from Photoshop CS5 onto photo paper, but for some reason this is not going well. I've tried playing around
-
How to setting in the onetime vendor and customer in AP/AR
Hi how to create onetime vendor /customer in AP/AR .which t code can be used in posting and where the vendor master level data filling and address and vendor name yps