Can't insert transitions properly

I was working on a project, had inserted a few fade transtitions and then something really weird started to happen: instead of the transitions being the standard 1 second (1;00) in length, they are now only 1 frame (;01) in length.
Even if I ctrl-click on the transtion and try to change the length of the transition, I just get an error beep when I try to change the length of the transition to anything but ;01. In addition, I'll sometimes get the "insufficient content for edit message", even though there is more than enough header material in both clips where I'm trying to attempt to put the transition. I've tried several different video transitions and keep getting the same errors. I've gone so far as creating a brand new project and importing my clips in as well as deleting all the user preferences for FCP, but I'm still getting the same error. I'm using a brand new install of FCP 6 with all current updates installed.
Any ideas?
Thanks

The clips I'm working on are all at least 3 minutes in length, so there is more than enough material to insert standard transitions. < </div>
Not the issue.
I'd rather get this working properly again rather than dealing with seperate tracks, opacity, etc. < </div>
Without looking over your shoulder, all I know about this is what you have posted and, from what information you have provided, you do not understand how FCP's transition paradigm works. I'll agree it's a silly metaphor. You can fight it all you want but we're stuck with it. Using separate tracks is a proven method to get people comfortable with the concept.
I've already dumped the user prefs several times to no avail. < </div>
You're assuming the prefs control the default transition length. But that's not your problem so you can safely stop trashing prfes.
bogiesan

Similar Messages

How can I insert transitions between clips?

I finished editing my seperate clips and now want to insert transitions between the clips, but that menu option is grayed out, so is the Movie Properties menu. What do I do?

Clips are in a Project timeline?
just drag the transition btw. them ...

How can I insert multiple page contents in the page layout properly?

I wanted to create 4 columns on the page layout. These 4 columns are of page contents.
After creating new web page based on that page layout, I attempted to enter 4 different inputs on all 4 columns.
Then, the result (from all columns) becomes the same.
Image - edit the web page based on 4 columns page layout:
Image - after edit & save:
How can I insert multiple page contents in the page layout properly?

First, I copied the HTML snippet for the Page Content on Sharepoint's Design Manger. The code of Page Content HTML snippet is shown below:
<div data-name="Page Field: Page Content">




<div id="ctl02_label" style="display:none">Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field"
style="display:inline" aria-labelledby="ctl02_label"><div align="left"
class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel"
nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit incididuntet dolore.</div>
</div></div></div>


</div>
After I published the page layout, I found the code for Page Content from its ASPX page. The code is shown below:
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/></div>
So, I attempted to create 4 columns by using 4 HTML snippets of Page Content on the same page layout. The page layout is generated from HTML file to ASPX file.
Then I edited some parts in ASPX page layout:
<asp:Content runat="server" ContentPlaceHolderID="PlaceHolderMain">
<table>
<tr>
<td style="width:70px;"> </td>
<td style="width:250px; text-align:right;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:40px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:175px;"> </td>
</tr>
</table>
</asp:Content>
The 4 columns for Page Contents appeared on the web page when I created new page using that page layout. But the problem is that all 4 columns displayed the same result from 4th column.

Can not insert null into foreign key issue

Hi ,
I am having parent-child relationship table.
In the child table when I am adding a new record , data is getting inserted with foreign key.
After insert if I immediately update the same record. Its giving error that can not insert null into foreign key.
If i click on rollback button I am able to update that record properly.

Hi ,
I am having parent-child relationship table.
In the child table when I am adding a new record , data is getting inserted with foreign key.
After insert if I immediately update the same record. Its giving error that can not insert null into foreign key.
If i click on rollback button I am able to update that record properly.

How to insert Transition object into html document

Hello Friends,
I am trying to insert Transition object ( downloaded from
Extension) into HTML document.
I tried Insert -> HTML -> Head Tags -> Transitions,
but after doing all this I am not able to insert
this extension in my document.
As I am beginner to Dreamweaver, Can anyone pls. help me out?
I am using Dreamweaver 8.
Do I need to select <img> tag before inserting
Transition Object?
Pls. pls. help me out.....
Waiting for reply.
Thanks in advance for your help.

When I used to do tabs I would set up a page that was as wide as the tab sheet including the tab, then add text frames in each tab position.

Inserted transition "grayed out" on split clip

Greetings,
Pretty new user so excuse the question...if repeated, tried to search but found nothing.
I am in advanced tools on my editor and split my video clip and inserted a transition. When I go into my precision editor, I see the transition inserted in the split but it is "grayed out" and not in white like it is usually. Am I missing a step here or doing something wrong? I can't make it work? I do have right next to it, a photo cut-away. (I wanted to split the video, insert the transition before the photo).
I can make the transition longer but again, it's grayed out and I can't see it on the final project.
Thanks for any suggestions and help.

Again, excuse the newbie here.
Yes, the split clip where I inserted the transition, is there and I can make the transition larger but how do you make the split larger? Is that what you are asking? I want the transition to come before the cut away photo (about 5.6 sec), then play back to the video. The video before is about 2 min in length before the split, or does the transition only work by previous by frame size?
Also, what file do I make a copy of where my movie is held (in preferences when you click on movie folder) to save a copy of this in another area on my HD so if I mess up one copy of the movie, I can go back to the original one and insert it back into the iMovie folder? Thanks.

IMovie HD 6 - Cannot insert transitions between short clips

I am attempting to assemble a movie using several short (8-15 second) clips. When I attempt to insert transitions, I get the following message:
"You cannot apply a transition between very short clips. They must each be at least 3:49:16 long."
I assume they mean 3 min, 48 sec, 16 frames. I don't remember having this issue before.
Is this something wrong with my installation, or do you really need 4 minute clips?

No, your iMovie program is acting strangely. For some reason iMovie believes that you are trying to insert a transition of almost 4 minutes duration between two clips of 15 seconds duration. (I can't recall any transitions longer than 10 seconds.) So it is giving you a message that your clips need to be longer.
When iMovie starts acting strangely, a commonly done procedure is this: Shut down iMovie and trash the file com.apple.iMovie.plist located in User/Library/Preferences. iMovie will create a new file on relaunch. Also, do a simple permissions repair using the Utilities/Disk utility application on your Mac. Then launch iMovie and see if your transitions work.
If your transitions still don't work, make sure that your Quicktime is updated to current version, and do a permissions repair like above after updating.

Why won't my jewel case inserts print properly?

Why won't my jewel case inserts print properly?

That's exactly what's happening with me as well. Evidently a recent iTunes update caused the problem, which is with version 11.0.2.26. Since I asked my question I found a thread on the same topic that is six pages and started last December. Apparently Apple became aware of the problem initially, sent an update that fixed it, then updated again recently without the fix. Maybe they'll get around to fixing it again soon. Check out this thread. One guy posted a picture of exactly what we're talking about:
https://discussions.apple.com/message/20528104?searchText=can't%20print%20cd%20j ewel%20case%20inserts#20528104

Can not insert/update data from table which is created from view

Hi all
I'm using Oracle database 11g
I've created table from view as the following command:
Create table table_new as select * from View_Old
I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)
Anybody tell me, what's happend? cause?
Thankyou
thiensu
Edited by: user8248216 on May 5, 2011 8:54 PM
Edited by: user8248216 on May 5, 2011 8:55 PM

I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)so what is wrong with the GUI tools & why posting to DATABASE forum when that works OK?

Can we insert data directly in standard table

hi
how can we insert data in standard table directly.
pls reply urgently.

Hi sapna yes u can insert data to the SAP tables, as shown below...
use the table mara in the place of m
REPORT ZTEST_INSERT.
TABLES: <m>.
DATA: wa_m TYPE <m>.
wa_m-ernam = 'ZTEST'.
insert into <m> VALUES wa_m.
if sy-subrc = 0.
WRITE / 'Records inserted Successfully'.
ENDIF.
reward if usefull,
Vishnu. R
Edited by: vishnu ramanathan on Sep 18, 2008 2:17 PM

Help!!urgent!!can not insert/update clob:the row containing the lob is not locked

Hi,
could you do me help?
i can not insert a string into a oracle clob field, it echo as:
ORA22920 row containing the lob value is not locked. ORA 06512 at "SYS.DBMS_LOB" line 708
ORA 06512 at line 1;
what its means? please.
my table defined as : create table clob1(id number(5),mclob clob default empty_clob()); the id is create by a sequece of test_sequence automaticly.
my code as belows:
import java.io.*;
import java.sql.*;
//import oracle.sql.*;
public class test4 {
public static void main(String args[]) {
String url_String
= "jdbc:oracle:thin:test/test@myhost:1521:myorcl";
try {
Class.forName
("oracle.jdbc.driver.OracleDriver");
java.sql.Connection con =
java.sql.DriverManager.getConnection(url_String);
con.setAutoCommit(true);
Statement stmt
=con.createStatement();
String sqlStr ="insert into
clob1 (mclob) " + "values(empty_clob())";
stmt.executeUpdate(sqlStr);
String query = "select
test_seq.CURRVAL from dual";
ResultSet rs =stmt.executeQuery
(query);
rs.next();
int currval =rs.getInt(1);
query = "select * from clob1 where
id="+currval;
String str
="abcedefhijklmnopqrstuvwxyz";
rs =stmt.executeQuery(query);
rs.next();
java.sql.Clob clob1
=rs.getClob(2);
oracle.sql.CLOB clob=
(oracle.sql.CLOB)clob1;
System.out.print(clob);
java.io.Writer
wr=clob.getCharacterOutputStream();
wr.write(str);
wr.flush();
wr.close();
stmt.close();
con.close();
} catch(Exception ex) {
System.err.println("SQLException: "
+ ex.getMessage());
null

Hi,
To avoid ORA-22920 error while selecting lob column, use the 'for update' clause in the select statement like :
query = "select * from clob1 where id="+currval+" FOR UPDATE" ;
This should solve the problem. However, after fixing this, you might get the error :
java.sql.SQLException: ORA-1002: fetch out of sequence
I got this error when testing your code. To avoid this error, before executing 'select ... for update' statement Set AutoCommit to OFF, like :
query = "select * from clob1 where id="+currval+" FOR UPDATE" ;
con.setAutoCommit(false);
rs =stmt.executeQuery(query);
Hope that Helps,
Srinivas

How can I insert values from table object into a regular table

I have a table named "ITEM", an object "T_ITEM_OBJ", a table object "ITEM_TBL" and a stored procedure as below.
CREATE TABLE ITEM
ITEMID VARCHAR2(10) NOT NULL,
PRODUCTID VARCHAR2(10) NOT NULL,
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE T_ITEM_OBJ AS OBJECT
ITEMID VARCHAR2(10),
PRODUCTID VARCHAR2(10),
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE ITEM_TBL AS TABLE OF T_ITEM_OBJ;
PROCEDURE InsertItemByObj(p_item_tbl IN ITEM_TBL, p_Count OUT PLS_INTEGER);
When I pass values from my java code through JDBC to this store procedure, how can I insert values from the "p_item_tbl" table object into ITEM table?
In the stored procedure, I wrote the code as below but it doesn't work at all even I can see values if I use something like p_item_tbl(1).itemid. How can I fix the problem?
INSERT INTO ITEM
ITEMID,
PRODUCTID,
LISTPRICE,
UNITCOST,
STATUS,
SUPPLIER,
ATTR1
) SELECT ITEMID, PRODUCTID, LISTPRICE,
UNITCOST, STATUS, SUPPLIER, ATTR1
FROM TABLE( CAST(p_item_tbl AS ITEM_TBL) ) it
WHERE it.ITEMID != NULL;
COMMIT;
Also, how can I count the number of objects in the table object p_item_tbl? and how can I use whole-loop or for-loop to retrieve values from the table object?
Thanks.

Sigh. I answered this in your other How can I convert table object into table record format?.
Please do not open multiple threads. It just confuses people and makes the trreads hard to follow. Also, please remember we are not Oracle employees, we are all volunteers here. We answer questions if we can, when we can. There is no SLA so please be patient.
Thank you for your future co-operation.
Cheers, APC

I can not insert a field in ANY report . . .

Post Author: Chass
CA Forum: General
I've searched around a bit about this. I can't find anything about anyone who had the same problem.
I was reporting along and suddenly CR v8.5 wouldn't let me insert a field anymore. I can't insert a field on a new or old report from the field exporer. I drag the field to the area of the report that I want to drop it and it stays a black circle with a line through it. It won't allow me to insert any field in any report.
I tested this on my coworkers computer and his is working fine. Same version, same report, same field.
What would cause my install of CR to stop allowing insertion of fields?
Thanks in advance . . .
Chass
ct

Post Author: Chass
CA Forum: General
For anyone else that runs into this issue. I searched heavily and came up with nothing.
I decided to uninstall and then reinstall the application and that fixed the problem.
I still don't know the original cause . . .
Chass
ct

How can I insert data into the standard CRM tables ?

Hi Experts,
Scenario----
I need to download few attributes (fields) from SAP MDM to SAP CRM via SAP XI. I'm using the 'COMT_PRODUCT_MAINTAIN_API' API for it.
The attributes(fields) that are present in the strucutres of API are downloaded into CRM system (by executing the Inbound proxy that is created based on the Message Interface created on XI) by calling the functions present in the API.
And for those fields that are not present in CRM, but need to be downloaded into CRM, I'm creating the Set Type attributes in CRM, which get appended to the API.
My query is:
There are fields in CRM into which I need to insert the values. But they are not listed in the API. So, how can I insert(/download) the values into these standard fields?
Regret the long description. Intended to be clear.
TIA. Points will be awarded.
Regards,
Kris
Edited by: Kris on Jul 21, 2008 8:00 AM

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

How can I Insert data into my msaccess Database table

Hello all,
I am new to Java programming and I have problem that how can i insert name into my database table.
The code which i have written is following:
String filename = "d:/test.mdb";
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database+= filename.trim() + ";DriverID=22;READONLY=true}";
Connection con = DriverManager.getConnection(database,"","");
String s = String.valueOf(text.getText());
int k =10;
Statement st = con.createStatement();
st.execute("create table Test123(name text)");
st.execute("INSERT INTO Test123 values" +s);
on the INSERT program throws exception???
can any one help me how to insert data into tabel.
Thanks

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

Can't insert transitions properly

Similar Messages

Maybe you are looking for