Can't remove or redeploy one process on 10.1.3.5
The 10.1.3.5.0 WEB BPEL Console appears to be different from the older one. I use to always be able to undeploy a BPEL process to clean up an deployment issue, but this new interface is different. I have one BPEL process which some how got deployed (sorta) on the server, and I can't get rid of it. The process has a yellow triangle showing and when I click on the triangle or process name I get the following WEB page:
>
ServerException
The process handle "MSS_DEV_Master" (revision "2.6") has not been loaded. The process may have failed to load properly. Please use the method "getErrors" for more information.
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information
Oracle BPEL Server version 10.1.3.5.0
Build: 0
Build time: Thu Aug 06 22:23:54 PDT 2009
Build type: release
Source tag: PCBPEL_10.1.3.5.0_GENERIC_090806.2156.1900
Exception Trace
1. com.oracle.bpel.client.BPELProcessHandle.checkIfLoaded BPELProcessHandle.java@671
2. com.oracle.bpel.client.BPELProcessHandle.getMetaData BPELProcessHandle.java@234
3. displayProcess.jspService _displayProcess.java@96
4. com.collaxa.cube.fe.JspPage.service JspPage.java@42
5. javax.servlet.http.HttpServlet.service HttpServlet.java@856
6. oracle.jsp.runtimev2.JspPageTable.service JspPageTable.java@473
7. oracle.jsp.runtimev2.JspServlet.internalService JspServlet.java@594
8. oracle.jsp.runtimev2.JspServlet.service JspServlet.java@518
9. javax.servlet.http.HttpServlet.service HttpServlet.java@856
10. com.evermind.server.http.ResourceFilterChain.doFilter ResourceFilterChain.java@64
11. oracle.security.jazn.oc4j.JAZNFilter$1.run JAZNFilter.java@400
12. java.security.AccessController.doPrivileged
13. javax.security.auth.Subject.doAsPrivileged Subject.java@517
14. oracle.security.jazn.oc4j.JAZNFilter.doFilter JAZNFilter.java@414
15. com.evermind.server.http.ServletRequestDispatcher.invoke ServletRequestDispatcher.java@644
16. com.evermind.server.http.ServletRequestDispatcher.forwardInternal ServletRequestDispatcher.java@391
17. com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward ServletRequestDispatcher.java@280
18. com.evermind.server.http.ServletRequestDispatcher.access$100 ServletRequestDispatcher.java@68
19. com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun ServletRequestDispatcher.java@214
20. oracle.oc4j.security.OC4JSecurity.doPrivileged OC4JSecurity.java@284
21. com.evermind.server.http.ServletRequestDispatcher.forward ServletRequestDispatcher.java@219
22. com.collaxa.cube.fe.DomainFilter.doFilter DomainFilter.java@231
23. com.evermind.server.http.EvermindFilterChain.doFilter EvermindFilterChain.java@15
24. oracle.security.jazn.oc4j.JAZNFilter$1.run JAZNFilter.java@400
25. java.security.AccessController.doPrivileged
26. javax.security.auth.Subject.doAsPrivileged Subject.java@517
27. oracle.security.jazn.oc4j.JAZNFilter.doFilter JAZNFilter.java@414
28. com.evermind.server.http.ServletRequestDispatcher.invoke ServletRequestDispatcher.java@642
29. com.evermind.server.http.ServletRequestDispatcher.forwardInternal ServletRequestDispatcher.java@391
30. com.evermind.server.http.HttpRequestHandler.doProcessRequest HttpRequestHandler.java@908
31. com.evermind.server.http.HttpRequestHandler.processRequest HttpRequestHandler.java@458
32. com.evermind.server.http.AJPRequestHandler.run AJPRequestHandler.java@313
33. ...
>
How can I clear this up for the server? I tried redeploying with the same BPEL process and version, but that appears to be ignored (though the server says it was successful). I then got rid of the *.../bpel/domains/grc/tmp/{bpel suitcase folder}* but that didn't affect anything as well. Bouncing the 10g server after removing the TMP folder for the suitcase jar didn't do anything as well.
Any suggestions would be appreciated.
ok... please follow the below steps.
go to your orabpel schema in the db and execute the below queries
delete from process where process_id="BPEL_PROCESS_NAME"
delete from process_descriptor where process_id="BPEL_PROCESS_NAME"
delete from process_log where process_id="BPEL_PROCESS_NAME"
delete from process_default where process_id="BPEL_PROCESS_NAME"
and the rebounce the server.. you will not see that process in the BPEL Console
Similar Messages
-
How can I pass parameters from one process flow to another process flow?
How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
KishanHi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark -
Please advise, i have somehow downloaded some extra tracks of the same songs, plus their relavant albums showing in songs/albums lists on my ipod nano 7th gen,how can i remove the unwanted extra songs/albums safely. Please note i am a newcomer to using a ipod nano/uploading,downloading music.
Hi Myketyke,
Welcome to the Support Communities!
Since you are syncing your iPod nano to your computer, the best option is to remove the duplicates from the iTunes library on your computer. Then resync your device. The article below will show you how:
How to find and remove duplicate items in your iTunes library
http://support.apple.com/kb/ht2905
Cheers,
- Judy -
Can you remove money from one itunes account to another
I am trying to buy an add on to an app that we all ready have but for some reason it is saying that I connot purchase what I need because my account didnt purchase the app. Can I move money over ot how should I go about doing this.
If the credit that you wish to transfer is just a remainder of a previous gift card that you redeemed, then it is not possible to transfer it to your other account.
But if it is unused (redeemed 20 GC and it is still 20 on the account), you may request to have it underedeemed. You need to call the Account Security Team as you will need to verify the account info and also provide the redemption code for the caed.
https://expresslane.apple.com/Issues.do -
I just started experimenting with the region feature, connecting text boxes in my default breakpoint. I don't see a way to remove the connection at other breakpoints. In fact I don't see a way to remove it at all, aside from Undo or restoring to an earlier save.
What am I missing?
Thanks,
JimStart with this...
abc
def
this should not be bulleted
Do this...
go to the end of the 'def' line
type a few returns to turn the bullets off
type some text
Get this...
abc
def
ghi
this should not be bulleted
Finish by doing this...
put your cursor at the beginning of the last line (inbetween the bullet and "this should...")
delete backwards
Voila!
abc
def
this should not be bulleted
Ben -
HT4623 my phon when i double tap, my apps do not jiggle and i can not remove my open ones
downladed to io7, and now when i double tap to close, my open apps, they do not jiggle and i can not x them out
Force closing apps changed in iOS 7.
Reading the User's Guide would have revealed this.
Double tap the home button to bring up the multi-tasking bar.
Swipe UP on the card to force close the app. -
Can not remove second line in Jabber for Tablet device on CUCM
Hi all,
The functionality we are trying to achieve is that people will have different DNs for their desk phones and Jabber for iPad devices, but when they make a call from the iPad, the desk phone DN will be shown. I have been testing out the Primary extension feature in the CUCM but it doesn't work properly so far. And now, I added two different DNs to a Jabber for Tablet device and can not remove the second one from 'Modify button items'. It gives the following error :
Update failed. TypeDbErrors.gen25083
Any ideas on how to fix this? Any ideas on how to use the primary extension feature?
Regards,
Fikri
Enironment :
CUCM 8.6.2
Jabber for iPad 9.3.2 / Jabber for iOS 9.6I would delete the device and recreate it or delete the DN and then put it back on the device(s) it does belong on. The only real way to fix this would a TAC case so they can open a defect for you.
Primary Extension isn't used in any of the alerting/connected display states. The only way to achieve this would be a lot of very complicated translation patterns/partitions/CSSes with calling party transformations on them. For example, if your desk phone DN was 2000 but the tablet DN was 3000, the translation pattern that would need to match for every number you dial would have to transform the calling party to 2XXX.
If you want an opinion, this is bad design. You don't email a person at a separate address for their desktop vs. their smartphone. CUCM is designed to work the same way: you are calling a user, not the device.
Please remember to rate helpful responses and identify helpful or correct answers. -
I just bought and used my apple tv. I tried renting a movie but was asked to go to my itunes to verify my info. In the process, I ended up renting the movie 2x and had to accept to be able to get the PLAY button to pop up on the screen. I watched to movie but do not want to be charged 2x for rental.
How can I remove one of the charges?You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
ALV grid can we remove the repetation values in field & display as one .
Dear Freinds,
i have developed a custom development relating to a salarly report based on the orgunit, the output is coming however i have one doubt in alv output.
right now my internal table data having data as follows : (iam giving only some fields)
orgunit orgdesc Empno Empname
70000905 Human Resources 7056 Richard
70000905 Human Resources 7057 Reymond Jain
70000905 Human Resources 7058 Maria Gulz
70000905 Human Resources 7061 Jacob
now in my output i dont want to have the orgunit value 70000905 and orgdesc (human resources) shouldnt not be repeated . is there any option in ALV where we I can use in
the field cat ( any parameter) where i can set that we can make the orgid as one and remove the repeation.(iam using alv grid function module).
Please help me in this regard
Regards
SyamlaHi,
Before displaying sort ur internal table.
refer this code.
*& Form sub_display_data
text
FORM sub_display_data .
*--To sort the output through material number
DATA : lwa_sort TYPE slis_sortinfo_alv.
DATA : lit_sort TYPE slis_t_sortinfo_alv.
*--Pass the values to the table
lwa_sort-fieldname = 'PERNR'. "Field name in o/p inttable
lwa_sort-tabname = 'it_final2'. "Output Internal table
lwa_sort-spos = '1'. "Sort sequence
lwa_sort-up = 'X'. "Sort in ascending order
lwa_sort-down = ' '. "Sort in descending order
lwa_sort-subtot = 'X'. "Subtotal
APPEND lwa_sort TO lit_sort.
*--Pass the values to the table
lwa_sort-fieldname = 'WORKDATE'. "Field name in o/p inttable
lwa_sort-tabname = 'it_final2'. "Output Internal table
lwa_sort-spos = '2'. "Sort sequence
lwa_sort-up = 'X'. "Sort in ascending order
lwa_sort-down = ' '. "Sort in descending order
lwa_sort-subtot = ' '. "Subtotal
APPEND lwa_sort TO lit_sort.
*--Pass the values to the table
lwa_sort-fieldname = 'WEKLY'. "Field name in o/p inttable
lwa_sort-tabname = 'it_final2'. "Output Internal table
lwa_sort-spos = '3'. "Sort sequence
lwa_sort-up = 'X'. "Sort in ascending order
lwa_sort-down = ' '. "Sort in descending order
lwa_sort-subtot = ' '. "Subtotal
APPEND lwa_sort TO lit_sort.
wa_layout-colwidth_optimize = 'X'.
IF NOT it_final2[] IS INITIAL.
*--Call the function module to display the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
i_callback_program = v_repid
it_fieldcat = it_fieldcat1[]
i_default = c_chk
i_save = c_save
it_sort = lit_sort
TABLES
t_outtab = it_final2
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
*--Message No data found
MESSAGE i888 WITH text-017.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " sub_display_data
Regards,
Prashant -
how can I remove the Apple ID authorization only on one computer and authorize another in his place?
De-authorize the computer in question.
Then authorize the new computer.
Or de-authorize all computers and authorize only the ones that actually exist. -
Q:-
How can I remove my very old Apple ID from my Iphone 4S. The old ID is still staying on my mobile but that email doesn't exist anymore. I cant rest my mobile as everytime i tried it asks ID password which I don't remember.Hello mushysun,
Thanks for using Apple Support Communities.
If you did not sign out of your Apple ID on your iPhone before creating a new one, then you will need to sign back in with your previous Apple ID and then sign out. If you do not remember your password and do not have access to the email account, then you can reset your password by using the security questions.
If you forgot your Apple ID password - Apple Support
Have a great weekend,
Alex H. -
Hello everyone.
My iPhone has two computers in (iTunes wifi sync) how can I remove one of them without using that computer?
because that PC stopped working so I had to recover it. Now everything is gone on that PC.
Also I bought a new computer (MacBook Pro) and I use iTunes on it in the mean time. Now I want to remove the old computer!
here is a photo of my (iTunes WiFi sync)
is there any way that I can use to do that?
ThanksHello,
Did you ever find a solution for this ?
I have the same issue and i dont know how to fix it. -
How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6. Now I can't remove her e-mail address from my computer. When I open Facebook her address shows in the user button. I do not have a Facebook account. It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this. Are temporary files the same as the cache? It also was suggested that I try clearing Safari cache. How do I do that?
Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.
-
How can I remove one page from adobe file
How can I remove one page from adobe file, when I try to remove the page a dialgue box say "some pages are being used, so they can not be ereased"?
Tools>Pages>Delete pages
-
HT5622 How can I remove one phone from my apple id and create a new apple id for that phone
How can I remove just one phone from my apple id and create a new apple id for just that phone
Follow the Checklist here
What to do before selling or giving away your iPhone, iPad, or iPod touch
Then set up the Phone as New using the preferred Apple ID.
Create one at My Apple ID
Maybe you are looking for
-
When I bring up my Mozillafirefox, all I get is a window with a blank white screen, (and the firefox logo). (After using Firefox very happily for over a year, I had to 'reinstall' Firefox 3.66 about a month and a half ago, (and lost all my bookmarks
-
Rfc to file scenario error in sm58
rfc to file scenario error in sm58 i get the error as com.sap.aii.afccommunication.RfcAfwException :look up of alternative
-
Hello, I am trying to find a GPS Tracker/Watch for my kids, Apple Iphone 5s compatible. Any suggestions?
-
A/C Assignment ctgry in Thirdparty.
HI, All, Can anyone help me that in A/C Assignment category say 'X', now we have feilds for mandetory, optional and hidden feilds, now i would like to know that at where this field impacts occurs.- is it in MIGO or MIRO.
-
HT4796 Trouble with music transfer with Migration Assistant...
i used migration assistant to transfer my music from my old pc to my new macbook pro last night. After 8 hours the message came back saying the transfer was successful but I can't find any music on my mac. Where is it?