Can't start Xorg server using "startx"[SOLVED]

Hi, I've just reinstalled arch on my netbook...And I get this weird problems...
1. I cant start the Xorg server, it only shows this:
/usr/bin/startx: line 196: xauth: command not found
2. Also when I install packages, it shows this for example:
/tmp/alpm_VkW1fs/.INSTALL: line 3: fc-cache: command not found
All of the packages I install (DE,Xorg,Etc.) usually shows that...Maybe they are related...:(
Thanks in advance...:)
Last edited by kaola_linux (2009-02-04 17:38:48)

Many times already I didn't encountered this type of problem before...I'm sorry
What do I need to install for xauth?
Btw, It's difficult to track problems for me coz I'm still in console and no DE yet..I'm just posting here using my Windows Desktop...:(
Here other example when I reinstall xorg:
/tmp/alpm_N5Yz97/.INSTALL: line 4: mkfontscale: command not found
/tmp/alpm_N5Yz97/.INSTALL: line 5: mkfontdir: command not found
Last edited by kaola_linux (2009-02-04 15:55:28)

Similar Messages

Can't start weblogic server using Ant

Hello,
I can't start the WL Portal after installation.
On a Windows 2000 Server SP2 : - I installed WebLogic Server 6.1 SP2 with the examples
- I installed WebLogic Portal 4.0 SP2 (giving the same password as during the WL
Server installation) -I installed EBCC 4.0 SP2 .
I updated the license with UpdateLicense.cmd
Now If I run - run the default WL server, both from the menu and as a service -
enter the WL server console (on port 7001) - run the EBCC .
When I try to start the WL Portal, from the program menu I am able to start the
WP server properly , But I I try to start it from an ant wlrun then I get the error
an IllegalAccessError (with the same password I gave during installation and I use
to enter the server console): The WebLogic Server did not start up properly. Exception
raised: java.lang.IllegalAccessError: try to access method weblogic/management/internal/Helper.preloadMBeanInfos()V
from class weblogic/management/Admin at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35) Reason: Fatal initialization exception
Any idea ?

Hi VG,
thank u a lot for ur answer. But there are no files at the Admin Server boot.properties path.
and at the BI Server boot.properties path there is no security folder. Do u have any idea why i cant found anything at this directions ? Also I tried again the command "./startWeblogic.sh " and get a new error message which I post below. I am rlly worry about this. Is there maybe a way to reset the OBIEE and undo all changes ?
<Oct 30, 2013 10:00:47 AM CET> <Warning> <EJB> <BEA-010001> <While deploying EJB 'AsyncAdminService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Oct 30, 2013 10:00:47 AM CET> <Warning> <EJB> <BEA-010001> <While deploying EJB 'AsyncAdminService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Oct 30, 2013 10:00:48 AM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application em is not versioned.>
^C<Oct 30, 2013 10:39:50 AM CET> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Oct 30, 2013 10:39:50 AM CET> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Oct 30, 2013 10:39:50 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Can't start glassfish server using Eclipse

i use the eclipse J2EE version to write my java program with Glassfish server. but when i compile the program,it take a long time to start the glassfish server, finally, it fail to start the server.
how can i fix it?

You need to ask this in Glassfish forum.

Can't start J2ee server using j2sdkee1.3.1

When i try to start j2ee server , it shows the following
Error message.
Exception in thread "main" java.lang.NoClassDefFoundError: javax/naming/Context
at com.sun.enterprise.server.J2EEServer.<clinit>(J2EEServer.java:53)
I have set all environment variables as follows
set path=.;c:\jdk1.2.2\bin;c:\j2sdkee1.3.1\bin;
set classpath=.c:\jdk1.2.2\lib;c:\j2sdkee1.3.1\lib\j2ee.jar
set JAVA_HOME=c:\jdk1.2.2
set J2EE_HOME=c:\j2sdkee1.3.
pls kindly give a solution.

Try rather using the 1.4 version available here: http://java.sun.com/j2ee/1.4/
and use this dedicated forum: http://forum.java.sun.com/forum.jsp?forum=136
-Alexis

Can't start RMI server using JAR file

I found it interesting that if I start my RMI server from
a plain directory, everything goes fine.
But if I jar all these necessary files into a jar file,
and start my RMI server with command below
java -jar server.jar
UnmarshalException and ClassNotFoundException are
thrown to indecate that my stub class can't be found
(which I'm sure my stub class is in jar file)
Why is jar file so special that it can't act like
what it originally does when it hasn't been jared?
or I really should take care of some configuration
before I really can run a jar file?
thanks

To clarify few things...
What I don't understand is that when I convert all my
directories and class files properly into the jar file, they
just can't work properly.
I don't know if it's a problem of JAR file,
or it's RMI that make this JAR file special?
I'll simulate my JAR file structure that listed below,
these structure works fine when they have'nt been
converted into JAR file.
META-INF/
META-INF/MANIFEST.MF
a/b/x1.class
a/b/x2.class
a/b/c/Y.class
a/b/c/Y_Skel.class
a/b/c/Y_Stub.class
And when I use command "java -jar server.jar"
to run my application, ClassNotFound exception
is thrown to indecate my stub class is not found.
Is there anything I can do to correct this?
thanks

Unable to start Manager server using Node Manager

Hi,
I have deployed Admin server in one of my unix machine(machine1) and i able to start my Admin server using node manager, and when i try to start my Managed server in another machine(machine2) using the node manager(that machine node manager) its throwing error;
Note: am able to start Managed server using Adminurl and able to connect to Managed server node manager successfully,
but not able to start Managed server using node manager
its giving exception as below;
error:- wls:/nm/webdomain> nmStart('ms1')
Starting server ms1 ...
Error Starting server ms1: weblogic.nodemanager.NMException: Exception while starting server 'ms1'
Managed server log: -
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
[root@LinuxVM ~]# cat /root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
Nodemanager log:
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00070">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server output log file is '/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out'>
<Dec 13, 2011 3:40:26 PM> <INFO> <webdomain> <ms1> <Server failed during startup so will not be restarted>
<Dec 13, 2011 3:40:26 PM> <WARNING> <Exception while starting server 'ms1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:200)
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:71)
at java.lang.Thread.run(Thread.java:662)

You can start a managed server as follows:
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);
print 'START MANAGED SERVER';
start('VideotheekWebServer','Server');
nmServerStatus('VideotheekWebServer');
print 'START CLUSTER';
start('VideotheekCluster','Cluster');
nmServerStatus('VideotheekServer1');
nmServerStatus('VideotheekServer2');JVM properties are set using the admin console and edit the startup properties of your managed server (configuration, server start).
The properties file (startup.properties) is saved in the directory <domain-home>/servers/<server-name>/data/nodemanager.

Help !! I can't connect to server using connection manager

Hello :
i hava three machine,i use connection manager on Oracle 8.1.7
i can't connect to server using connection manager
1.lsnrctl start (Server)
2.svmrgrl (Server)
start (Server)
3.cmctl start (Middle tier)
4.sqlplus scott/tiger@test (client)
ORA-12564
Please help my!
---- CLIENT (sqlnet.ora)
USE_CMAN = TRUE
NAMES.DIRECTORY_PATH= (TNSNAMES)
---- CLIENT (tnsname.ora)
(DESCRIPTION =
(SOURCE_ROUTE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = orcl-middler)(PORT = 1610))
(ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
(CONNECT_DATA =
(SID = bigbear)
---- MIDDLE TIER(cman.ora)
CMAN = (ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = orcl-middler)
(PORT = 1610)
---- SERVER (listener.ora)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/8.1.7)
(SID_NAME = bigbear)
---- SERVER (init.ora)
MTS_DISPATCHERS = "(PROTOCOL = TCP)(DISPATCHERS=10)(MULTIPLE=ON)"
MTS_MAX_DISPATCHERS=20
MTS_MAX_SERVERS = 30
MTS_SERVERS = 10
MTS_SERVICE = bigbear
db_name = "bigbear"
db_domain = intumit.com
instance_name = bigbear
service_names = bigbear.intumit.com

midder tier must config hosts
because dispatcher have listener information
midder tier must know ipaddress
Ex. on midder tier
/etc/hosts
192.168.10.1 orcl-middler
from client to server it's ok

Can i start managed server from another UNIX BOX ..

          Hello,
          I have created Admin Server on 1 UNIX Box & Managed SErver on 2nd UNIX Box. After
          starting ADMIN server on one UNIX Box, i wanted to start managed server using
          same script.I can manually login to 2nd unix box & start managed server. I am
          wondering if i can start using startup script from 1st UNIX Server.
          Thanks


You have to run the startup script from the machine where you want to start the server
          for now. Also the script has to be different for admin and managed server as the init
          arguments to java commands are different.
          We have plans in future to start managed servers from admin servers itself.
          Viresh Garg
          Principal Developer Relations Engineer
          BEA Systems
          Wlstech wrote:
          > Hello,
          >
          > I have created Admin Server on 1 UNIX Box & Managed SErver on 2nd UNIX Box. After
          > starting ADMIN server on one UNIX Box, i wanted to start managed server using
          > same script.I can manually login to 2nd unix box & start managed server. I am
          > wondering if i can start using startup script from 1st UNIX Server.
          >
          > Thanks

New install of SJS Ent 8 on Solaris, can't start Application Server 8.1

Hello,
Appreciate in advance your help.
Just downloaded and installed SJS 8.1 on a new Sun Solaris 10 box. I'm able to run the IDE and have started the Tomcat server, but when attempting to start the SJS 8.1 application server, I get:
The Sun Java System Application Server 8.1 could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- Port conflicts. (use netstat -a to detect possible port numbers already used)
- Incorrect server configuration
- Corrupted Deployed Applications
The problems are:
- There is no server.log file in the expected directory at /opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/logs
- I ran netstat -a, but could glean no useful information
- I have not modified the server configuration since the new install
- I have not deployed my application (since I can't start the server).
Forgive my ignorance since I'm not a Solaris expert. I would greatly appreciate your assistance.

No difference in server.log after setting level="FINEST".
Don't know if it would help, but the contents of my server.log file follow:
[#|2006-09-25T15:39:46.485-0400|INFO|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|
/opt/sun/jstudio_ent8/jdk1.5.0_04/bin/java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/logs/server.log
-Djava.endorsed.dirs=/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/endorsed
-Djava.security.policy=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/server.policy
-Djava.security.auth.login.config=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/keystore.jks
-Djavax.net.ssl.trustStore=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/config/cacerts.jks
-Djava.ext.dirs=/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/lib/ext:/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1/lib/ext
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=myDomain1
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=/opt/sun/jstudio_ent8/AppServ8.1UR2/domains/myDomain1
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=myDomain1
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=/opt/sun/jstudio_ent8/AppServ8.1UR2/config
-Djava.library.path=/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/lib/i386/client:/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/lib/i386:/opt/sun/jstudio_ent8/jdk1.5.0_04/jre/../lib/i386:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib:/usr/lib/lwp::/usr/lib
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
/opt/sun/jstudio_ent8/jdk1.5.0_04/lib/tools.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/activation.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/mail.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/admin-cli.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-admin.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-jstl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-logging.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee-svc.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jax-qname.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxr-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/dom.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxr-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxrpc-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jaxrpc-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/relaxngDatatype.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/saaj-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/saaj-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/xsdlib.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jmxremote.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jsf-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jmxremote_optional.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/jsf-impl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/rmissl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/xalan.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/xercesImpl.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_ja.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_zh.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_zh_CN.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_ko.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_fr.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-assemblytool_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-cmp_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-rt_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/commons-launcher_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/deployhelp_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/j2ee_es.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-upgrade.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/appserv-ext.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/install/applications/jmsra/imqjmsra.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/imq/lib/jaxm-api.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/imq/lib/fscontext.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/lib/ant/lib/ant.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/pointbase/lib/pbclient.jar:/opt/sun/jstudio_ent8/AppServ8.1UR2/pointbase/lib/pbembedded.jar
com.sun.enterprise.server.PEMain
start|#]
I do notice that the class path references jdk1.5.0_04. When installing SJS I selected the separately installed jdk1.5.0_07. Could that be causing the problem?
You have great patience.

Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1

Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.

Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks.

Starting WebLogic Server using Console

This is a simple question. I am trying to start the WebLogic Server
using the WebLogic Console. It seems to be starting the wrong WebLogic
server.
When I monitor the log information in the console I see it starts the
server with a 32ms and a 32mx whereas in my startWebLogic.sh script I
have specified 128ms and 128mx. How do I make my startconsole.sh script
read the correct startWebLogic.sh script ? This is on solaris.
When I ran the script startWebLogic.sh it was able to start up
completely.
Thanks.

Ted,
Thanks for the reply. Just another question on this-I have added a lot of jar files to the
WEBLOGICCLASSPATH in my startWebLogic.sh script. I presume since I am starting the server using the
console I need to add this information(the WEBLOGICCLASSPATH variable) to the startConsole.sh script
and try running the server again.
Currently its reporting that its unable to find the server classes which I wrote.
Aswin.
Ted Dyer wrote:
Aswin,
Sorry for the confusion. When you start the server in the console, you get a dialog window. There
is a button labled "Advanced..." Click on that and set the "Java Heap (MB)" to 128. That will do
what you want it to.
Ted
Aswin Dinakar <[email protected]> wrote:
Ted,
I guess I was not clear on my problem. When I start the weblogic server using the
weblogic console it doesnt seem to be running the startweblogic.sh script. It seems to be
running another version of the startweblogic.sh script which I dont know where its getting
from.
Aswin.
Ted Dyer wrote:
Aswin,
Did you edit your startConsole.sh? The last line in that file should set your ms and mx.
It should say something like:
$JAVA -ms16m -mx48m -classpath $JAVACLASSPATH weblogic.Console
Changing the ms and mx values here should have the affect you're looking for.
Ted
Aswin Dinakar <[email protected]> wrote:
This is a simple question. I am trying to start the WebLogic Server
using the WebLogic Console. It seems to be starting the wrong WebLogic
server.
When I monitor the log information in the console I see it starts the
server with a 32ms and a 32mx whereas in my startWebLogic.sh script I
have specified 128ms and 128mx. How do I make my startconsole.sh script
read the correct startWebLogic.sh script ? This is on solaris.
When I ran the script startWebLogic.sh it was able to start up
completely.
Thanks.

Can't start report server on windows 2000

I can't start report server with error code 186, my tnsname.ora is
REP60_DUQ = Rep60_DUQ
is it error?
who can tell me how to resolve it!!!

but I have add tnsnames.ora following
Rep60_REPORT_SERVER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = REPORT_SERVER)(PORT = 1951))
then I start report server with:
/PATH_TO_REPORTSERVER/report60_server start
it still says:
REP-0186: Daemon failed to listen to port
what is problem?
any thing must be done to activate changes in
tnsnames.ora?
null

Errors while starting admin server using WLST and NodeManager

Hi I am trying to start admin server using WLST and NodeManager. I started nodemanager and WLST successfully. but when I am trying to nmConnect() command I am getting below errors. Please any one tell me where am I going wrong? I copied dumpStack() optput as well..
thanks
manohar
C:\oracle\Middleware\wlserver_10.3\server\bin>
C:\oracle\Middleware\wlserver_10.3\server\bin>java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic','weblogic','localhost','5556')
Connecting to Node Manager ...
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
loading of the trusted certificate list raised a certificate parsing exception
PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.
\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate p
arsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.84
0.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node
Manager. : I/O error while reading domain directory
Use dumpStack() to view the full stacktrace
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline> dumpStack()
This Exception occurred at Tue May 03 10:45:03 EDT 2011.
weblogic.nodemanager.NMException: I/O error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:299)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:312)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.jav
a:248)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.
java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(Nod
eManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManage
rService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx16.f$0(<console>:1)
at org.python.pycode._pyx16.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
weblogic.nodemanager.NMException: I/O error while reading domain directory
wls:/offline>
wls:/offline>

Hi manohar,
Please try the following article... (With Node Manager Communication type as "Plain" because it looks like you are getting PKIX security certificate chain message ) Just to isolate the issue
Topic: Start AdminServer And NodeManager Using WLST
http://middlewaremagic.com/weblogic/?p=6580
Thanks
Ravish Mody

Can't start http server ASControl service

Hi, I installed http server from companion cd for oracle 10.2.0.3 but when configuration assistants was setting http server give the message failed.
Now i can´t start http server service.
INFO: El asistente de configuración "OC4J Configuration Assistant" se ha ejecutado correctamente
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Created a new file C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.1
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.2
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.3
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.4
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.5
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: Iniciando la ejecución de los asistentes de configuración
INFO: Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe startall
Command = C:\oracle\product\10.2.0\http_1/opmn/bin/opmnctlw.exe has failed
INFO: El asistente de configuración "Starting HTTP Server" ha fallado
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\http_1
Configuration directory is set to C:\oracle\product\10.2.0\http_1\cfgtoollogs. All xml files under the directory will be processed
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.6
GRAVE: OUI-25031: Fallo de algunos asistentes de configuración. Se recomienda volver a probar los asistentes de configuración en este momento. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
1. Compruebe en el panel Detalles de la pantalla de Asistentes de Configuración los errores resultantes de los fallos.
2. Corrija los errores que causan estos fallos.
3. Seleccione los asistentes que han fallado y haga clic en el botón 'Reintentar' para volver a probarlos.
INFO: Usuario seleccionado: Sí/Aceptar
INFO: --------------------------------------
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands" contiene todos los comandos con fallos, saltados o cancelados. Este archivo se puede utilizar para ejecutar estos asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: El archivo de comandos "C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolAllCommands" contiene todos los comandos que van a ejecutar los asistentes de configuración. Este archivo se puede utilizar para ejecutar los asistentes de configuración fuera de OUI. Tenga en cuenta que puede que tenga que actualizar este archivo de comandos con contraseñas (si se aplican) antes de ejecutar el mismo.
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.0\http_1\cfgtoollogs\configToolFailedCommands.bak.7
GRAVE: OUI-25029: Uno o más asistentes de configuración "recomendados" no han terminado correctamente. Si no se ejecuta correctamente algún asistente "recomendado", el sistema no se configurará correctamente.
INFO: Usuario seleccionado: Sí/Aceptar
INFO:
*** Fin de Instalación Página***
La instalación de Oracle Database 10g Companion Products ha sido correcta, pero han fallado, se han cancelado o se han saltado algunos asistentes de configuración opcionales.
ADVERTENCIA: ¿Seguro que desea salir?
INFO: Usuario seleccionado: Sí/Aceptar

user13078324 wrote:
How ?in cmd run this
netstat -an
and search for a line like
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
The important is TCP, 80 and keyword LISTENING
Other may differ

Starting admin server using WLST and NodeManager

Hi I am trying to start admin server using WLST and NodeManager. I started nodemanager and WLST successfully. but when I am trying to nmConnect() command I am getting below errors. Please any one tell me where am I going wrong? I copied dumpStack() optput as well..
thanks
manohar
C:\oracle\Middleware\wlserver_10.3\server\bin>
C:\oracle\Middleware\wlserver_10.3\server\bin>java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic','weblogic','localhost','5556')
Connecting to Node Manager ...
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
loading of the trusted certificate list raised a certificate parsing exception
PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.
\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate p
arsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.84
0.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node
Manager. : I/O error while reading domain directory
Use dumpStack() to view the full stacktrace
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline> dumpStack()
This Exception occurred at Tue May 03 10:45:03 EDT 2011.
weblogic.nodemanager.NMException: I/O error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:299)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:312)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.jav
a:248)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.
java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(Nod
eManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManage
rService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx16.f$0(<console>:1)
at org.python.pycode._pyx16.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
weblogic.nodemanager.NMException: I/O error while reading domain directory
wls:/offline>
wls:/offline>

Hi manohar,
Thank you, Pierluigi for encouraging Middleware Magic Team :)
manohar, apart from what *"Pierluigi"* has suggested, additionally please notice the following messsage in your StackTrace (whih is basically a NOTICE message but does not look good)
The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object:In your case it looks like the actual issue is your Certificate which comes by default with JDK. As mentioned in this BUG.
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6803022
Additionally please refer to the following Thread:
http://forums.oracle.com/forums/message.jspa?messageID=3958098#3958098
I am suspecting that you need to do the following in order to get rid of Certificate Errors which is the ROOT cause of your issue
Do the following: After taking a backup of *"$JAVA_HOME/jre/lib/security/cacerts"* file
cd $JAVA_HOME/jre/lib/security
cp -p cacerts cacerts.original
chmod 644 cacerts
keytool -delete -alias ttelesecglobalrootclass2ca -keystore cacerts
keytool -delete -alias ttelesecglobalrootclass3ca -keystore cacertsAlso try with Node Manager Communication type as "*Plain*" because it looks like you are getting PKIX security certificate chain message, just to isolate the issue.
Regards,
Ravish Mody

Can't start Xorg server using "startx"[SOLVED]

Similar Messages

Maybe you are looking for