Can't use != in a report HTMLDB ver 2

Just a note to any one if they get the same
I created a report (just a select with where clauses)
I was trying to exclude STATUS where STATUS = D
I tried
where
table.STATUS != 'D'
table.STATUS <> 'D'
the only thing I could get to work was
where
table.STATUS IS NULL or table.STATUS = 'A' or table.STATUS='C'
these are the only values other than D in the column
strange one

try
where NVL(table.STATUS,'qswea23v5') != 'D'
This ensure that null values are evaluated correctly.
Hope this helps!

Similar Messages

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

What is the use of control breaks in reoprts?how can we use them in report?

hello all
what is the use of control breaks in reoprts? and how can we use them in reports?

hi,
check this sample program using control break statements.
*& Report Y777_CBSTABLE
REPORT Y777_CBSTABLE1.
TYPES:
BEGIN OF S_MARKS,
     ROLLNO    TYPE I,
     SCODE(3) TYPE C,
    ROLLNO    TYPE I,
     SNAME(10) TYPE C,
     MARKS     TYPE I,
END OF S_MARKS.
DATA : C TYPE I,
       D(3) TYPE C,
       TOT TYPE I,
       STU TYPE I,
       MARKS TYPE STANDARD TABLE OF S_MARKS,
       WA_MARKS TYPE S_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 65.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 85.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 1.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 90.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'MAT'.
WA_MARKS-SNAME = 'MATHS'.
WA_MARKS-MARKS = 55.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'SCI'.
WA_MARKS-SNAME = 'SCIENCE'.
WA_MARKS-MARKS = 75.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
WA_MARKS-ROLLNO = 2.
WA_MARKS-SCODE = 'COM'.
WA_MARKS-SNAME = 'COMPUTER'.
WA_MARKS-MARKS = 80.
APPEND WA_MARKS TO MARKS.
CLEAR WA_MARKS.
RETRIVAL ************************************
SORT MARKS BY SCODE .
LOOP AT MARKS INTO WA_MARKS.
    AT FIRST .
       ULINE.
       FORMAT COLOR 6 ON.
       WRITE:/ 'SUBJECT CODE', 65 ' ' .
       FORMAT RESET.
       FORMAT COLOR 6 ON INTENSIFIED OFF.
       WRITE:/20 'ROLL NO',
              40 'SUBJECT NAME',
              55 'MARKS',
              65 ' '.
       FORMAT RESET.
       ULINE.
    ENDAT.
    ON CHANGE OF WA_MARKS-SCODE.
       IF SY-TABIX NE 1.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
       ENDIF.
      FORMAT COLOR 6 ON INTENSIFIED ON.
      WRITE:/ WA_MARKS-SCODE.
      FORMAT RESET.
    ENDON.
    FORMAT COLOR 6 ON INTENSIFIED OFF.
    WRITE:/20 WA_MARKS-ROLLNO,
           40 WA_MARKS-SNAME,
           55 WA_MARKS-MARKS,
           65 ' '.
    FORMAT RESET.
    STU = STU + 1.
    TOT = TOT + WA_MARKS-MARKS.
    C = STU.
    AT LAST.
           NEW-LINE.
           ULINE 40(25).
           FORMAT COLOR 5 ON INVERSE ON INTENSIFIED ON.
           TOT = TOT / STU.
           WRITE:/40 'AVERAGE MARKS =', TOT.
           FORMAT RESET.
           CLEAR TOT.
           CLEAR STU.
         ULINE.
         FORMAT COLOR 6 ON INVERSE ON INTENSIFIED ON.
         WRITE:/ ' TOTAL STUDENTS : ', C.
         FORMAT RESET.
    ENDAT.
ENDLOOP.
reward points if hlpful.

Can we use xml Publisher reporting for sql* Plus in EBS

Hello All,
The current report is designed in Sql* Plus Executable report and the output is in txt format, Now the requirement is to have the output in Excel format.
So is it possible to use the xml reporting and make the output as Excel from the word template we design from MSword as we do for rdf(I have done few reports created in rdf to xml publisher reports in EBS and stand alone as well.).
Do the same procedure will suit for Sql*Plus reports tooo or Is there any work around to achieve this.
Thanks and Regards
Balaji.

Hi
Thanks for the reply..
I tried to do the follwoing
1. changed the output to xml in the conc. prog.
2. ran the same report but i am getting the follwoing error in the output file
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource
Other reports which are using the Oracle Reports(rdf) as source, i am able to generated the xml as expected....
So my question is whether we can use sql* reports executable and generate xml in the conc.prog.
if any one has used the sql*reports for xml publisher reporting... please let me know, so that if its possible i will check my sql needs some validation or tuning...
thanks in advance
Balaji.

How can i use link in report to go to new page with parameters??

Hello
I've created a report and have added a link (to a html url) to one of the columns. Whenever i click that column in a row, a new page appears. At this moment this page is static. However, i want to show the details of the selected row in the report. This means that somehow i have to pass a parameter to the second page with the primary key of the selected report row.
Is there any way to do this?
Thanx
Ben

You can do this using SQL based reports.
Here is an example
select ''||empno||'' emplink,ename
from SCOTT.EMP
Here the link "http://forums.oracle.com/forums/message.jsp?id=" takes a parameter whose value is the empno.
In the column formatting section of SQL reports you should display this column as HTML and not TEXT.

BPC security can be used in SQL Reporting Services?

Hello,
We are trying to implement SQL Reporting Services(RS) as web reports of BPC.
Is it possible to use BPC security user access control in SQL RS?
We know that SQL RS user access can be managed by windows domain, but we like to use BPC security as SQL RS user control.
Thank you in advance.
Sam

Hello,
We are trying to implement SQL Reporting Services(RS) as web reports of BPC.
Is it possible to use BPC security user access control in SQL RS?
We know that SQL RS user access can be managed by windows domain, but we like to use BPC security as SQL RS user control.
Thank you in advance.
Sam
==================================================================
Hi Sam,
Could you be more specific on what you are going to do with RS?
BPC, as you know, uses Windows AD. If you intend to use RS in BPC, you have already introduced Windows AD and BPC access security for RS. But only given RS report is eligible in this case.
If you want to make a report that refers to business data of BPC, and need to pass argument as query parameter such as what category, what entity, not possible actaully, no way to make it happen with standard feature of BPC. But you can think of possibility of customizing and need to find out how to pass the argument for a user(read ACS table containing security info).
Reg. the reporting tool, if you are using 7.5, BO products is aligned well. Xcelsius and Voyager will be a tool for your requirement.
Regards,
YH Seo

Can I use forms and reports 6I runtime for production environment?

I have a doubt.
I know if i use or install developer (forms and reports 6I) both, runtime and builder, I do require a license.
But If I buy the standard edition license for database (in production or deployment), and I wanna use the runtimes (from forms and reports) only as runtime not to modify or develop anything, is it possible? just to download it or install it in RUNTIME mode?
Is it possible and legal?
Thanks

Can I download that developer and install both forms and report runtime (yes only runtime) to access a licensed standard edition database? The problem is, you can't download that version any more! All download links to Forms version earlier that 10g R2 have been removed from Oracle's web site. You might still be able to download Forms 6i from My Oracle Support, but this requires a paid license agreement with Oracle to access My Oracle Support (formerly Metalink).
So, if you already have a copy of Oracle Developer Forms and Reports 6i then all you need to do is contact your local Oracle Sales Representative to get an official answer to your licensing question. If you don't have a copy of Forms 6i, then you are pretty much out of luck unless you know someone who has a copy!
Craig...

HT4759 How can I use iCloud with MAC OSX Ver 10.6.8?

Mobile Me has been discontinued and my under 3 yr old MAC does not have the system requirements to support iCLOUD. Trying to find an iphone with an app that will work on a MAC OSX Ver 10.6.8.
Thanks

You're welcome. In order to connect to your iCloud account on your Mac it has to be running OS X Lion (10.7.2) or higher. You would need to upgrade to either Lion or Mountain Lion in order to set up iCloud if your system meets the system requirements.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion system requirements are shown here: http://support.apple.com/kb/HT5444.
If you can run Mountain Lion, you can purchase an upgrade from the Mac App Store. If you can only run Lion, contact the online store in your country and purchase a download code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table.

Can I use Report Manager to distribute customized oracle reports?

Hi,
Can I use Report Manager to distribute customized oracle reports, other than FSG reports?
If no, is there any function that can be used for distributing reports submitted from concurrent manager in r12.1.2?
Thanks for any advice!
HY

Pl post details of OS and EBS versions.
>
Can I use Report Manager to distribute customized oracle reports, other than FSG reports?
>
I am not sure - pl ask your friendly Oracle salesperson if this functionality is included in your license.
>
If no, is there any function that can be used for distributing reports submitted from concurrent manager in r12.1.2?
>
Another option could be to use XML/BI Publisher - again, you will need to check if your license includes distributing custom reports.
HTH
Srini

Can I use Oracle Report Server to print from APEX? How?

Hello, we have Oracle Application server, Oracle Report server and now we just installed APEX and doing a pilot project. Since we don't have BI Publisher, how can we use our Oracle Report server to print from apex report? Can it be done and if yes where can I get some detail info that I can share with our DBA?
I have in past asked questions about the printing issues but I have been refered to http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html#01 section 5 which talks about another installation.
Thanks so very much for any info.
-iahmadi

You can use FOP, but the formatting of the xsl (Xml Style Sheets) takes a little work. If you have the Oracle Reports server up and access to the development product, why not go that route?
You want the filtering and sorting and searching, yes, but then you also want to print them out.. Then you would probably be best looking at replacing the Oracle Reports setup with BI Publisher. You can convert Most your reports over to bi publisher layouts easily.. (I have heard of some reports that do require recreating in Bi Publisher from Oracle Reports..)
Then you can have your Apex Reports and call Bi Publisher from APEX and everyone wins..
Is your Oracle Reports stuff used by non-APEX applications, that could be modified to use Bi Publisher?
Thank you,
Tony Miller
Webster, TX

What is maximum number of tables that can be used to create HTMLDB app?

What is the maximum number of tables that can be used to create an HTMLDB app? There seems to be a 10-table limit?
Thanks.
Dianna Gibbs

I have over 200 photos in my book and it was accepted. There is a limit on each widget though. The interactive widget seems to have a limit of around 30 or 40.

What is the use of control breaks in reoprts? and how can we use them?

hello all
what is the use of control breaks in reoprts? and how can we use them in reports?

use F1 on AT in a program.
You get this
Control break with extracts
- AT NEW f.
- AT END OF f.
- AT FIRST.
- AT LAST.
- AT fg.
Control break with internal tables
- AT NEW f.
- AT END OF f.
- AT FIRST.
- AT LAST.
Each of these have a link to explain in detail what you are asking.

Can we use the built-in Row fetch for Multiple reports in a page?

I need to create a page with multiple report regions. Each of it is based on a table. Those tables are different. I somewhat remembered that we can NOT use the built in automatic row fetch process if there are multiple report regions, neither the built in DML process. You have to make your own fetch and insert/update/delete process if you intend to.
Also if I write my own row fetch and update processes, do I have to consider lock mechnism? or just simply write select and insert/update?
Any input is appreciated.

I think I found the answer. Would Scott or other gurus take a look at the thread and confirm it, in case the limitation is not in 2.0?
Re: automatic row fetch
What I am concered about is that the locking mechanism. If I have to write my own process to fetch and insert/update, other than the regular select and insert/update statements, do I have to put commit by myself, or htmldb can handle it automatically? Is there an example for this?
Thanks in advance.

In alv report can i use control break events? if no .whay?

Hi all,
in alv report can i use control break events? if no .whay?

hi,
you can use control break statements in ALV report.
for example: if one PO is having more than one line item, that time you need to display PO only once.

Can we use Dynamic SQL in Oracle Reports ?

Hi ,
Can we use Dynamic SQL in Oracle Reports ?
If yes please give some examples .
Thanx
srini

I believe the built-in package SRW.Do_Sql is what you are looking for
Example from the document:
/* Suppose you want to create a "table of contents" by getting the
** first character of a columns value, and page number on which its
** field fires to print. Assume that you want to put the "table of
contents"
** into a table named SHIP. You could write the following construct:
DECLARE
PAGE_NO NUMBER;
PAGE_FOR INDEX NUMBER;
SORT_CHAR CHAR(1);
CMD_LINE CHAR(200);
BEGIN
SORT_CHAR := :SORT_NAME ;
IF :CALLED = Y THEN
     SRW.GET_PAGE_NUM(PAGE_FOR_INDEX);
     SRW.USER_EXIT(RWECOP PAGE_FOR_INDEX
     P_START_PAGENO);
     SRW.MESSAGE(2,TO_CHAR(:P_START_PAGENO));
END IF;
SRW.GET_PAGE_NUM(PAGE_NO);
CMD_LINE := INSERT INTO SHIP VALUES
                      (||SORT_CHAR||,||TO_CHAR(PAGE_NO)||);
SRW.MESSAGE(2,CMD_LINE);
SRW.DO_SQL(CMD_LINE);
COMMIT;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
        NULL;
WHEN SRW.DO_SQL_FAILURE THEN
        SRW.MESSAGE(1,FAILED TO INSERT ROW INTO SHIP TABLE);
WHEN OTHERS THEN
       COMMIT;
END;

Can't use != in a report HTMLDB ver 2

Similar Messages

Maybe you are looking for