Can we add tab in me27 T- code Screen

please help me
Can we add tab in me27 T- code Screen
Edited by: vikram kamuni on May 31, 2008 4:32 PM

what tab you want to add?

Similar Messages

How can I add the date to my locked screen on iPhone 5, i0S7

How can I add the date to my locked screen on iPhone 5, i0S7

The date is not showing up on the locked screen since I updated to the latest software. Trust me, I looked for it before posting

Can't move tabs anymore and can't add tabs to or change homepage in new version 4

I can no longer switch tabs positions, and I can't change homepage, i am stuck on top sites also lost all forward back new tab stop reload, I had to add them to the tool bars. If i can't move tabs or save and quit then I am going back to older version

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Can't add bookmarks - always sent to home screen.

I am having an odd issue with Safari. No matter which bookmark button I hit, "Add to Home" or "Add Bookmark", the option to add an icon to the home screen always comes up. I cannot add a bookmark to my bookmark list. I am running 3.1.2 and have had this issue since 3.0.
Does anyone know how to remedy this?

1. Restart your phone: Press and hold the Sleep/Wake button for a few seconds until a red slider appears, and then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
2. Reset your phone: Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
3. Restore your phone: http://support.apple.com/kb/HT1414

How can i add more statements in java code dynamically...

I have a (business works) BW process in TIBCO which has many activities including �java code�. In java code activity I have some if statements like
if (Country.equals("USA�))
Country code = 1
else if(Country.equals("GERMANY�))
Country code = 49
the above information is coming from database. now my project is deployed and running. In future, if they add more countries in database how I can include them dynamically without changing my BW process java code activity and redeploying again. Is there any solution?
Please advice.

You won't reconfigure the Java application without redeploying. This is one of the reasons that including data in the code is bad.
If you created a file which contained data like this:
Canada <tab> 1
USA <tab> 12
Germany <tab> 6
Then your program could read the file into a map. The map could be used to lookup the country code based on the name.
In the future, you could change the file to:
Canada <tab> 1
USA <tab> 12
Germany <tab> 6
France <tab> 17
China <tab> 2
And the program wouldn't need to be changed. You would just need to send out the new country file.

Can you add a button to a query screen ?

Hi
I am working on SP01 PL36, my customer would like me to add an email button to a query screen and create an email based on the email addresses in the query
I am fine creating the email but I can't seem to detect when the screen is being loaded so I can add a button to it
Is it possible ?
Thanks
Regards Andy
Regards Andy

Paul,
To Add a Button to a form you would need to write SDK code. This involved coding using the SDK tools.
Please refer your question to the SDK Forum to get details on how to go about this.
Suda

How to add TAB functionality in module pool screen

Hi,
I have created a screen with two fields(input/output).My requirement is generally cursor is in the first field when user pressed TAB key then cursor has to move to second field.How can i fulfil this requirment.
Thanks,
shyla

Hi,
If u have created your input filed (Input/Output-Se51) field in screen layout then it will automatically jump to next input field when u press enter.
Chk it out.

Can not add new contact to the phone, screen gives no place to type in name

In the past had no issued adding a new contact to iPhone 5s, now when that screen is opened there is no possibility to type names phone number etc.
How do I fix this?

Let's get your contacts updated, Scoop29! May I ask what software version are you running? Check through Settings>General>About. Are you given any " " or Edit option for existing contacts? I am eager to get to the bottom of this!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

Can I add bookmarks "list" to home screen"

Can I add an icon to my home screen which has "all" the bookmark web sites list, under the one icon?

The closest I could find is when you bookmark a website tap "add to home screen " when available. Then put all those site's icon in a folder. I did notice however not all sites wanted to go into the folder.

How can I add more chosen websites for quick access in the remaining empty fields in "file"-"new tab"? ing empty fields

I can´t add preferred, chosen, most visited or bookmarked websites to the 28,15 or 6fields in"file" - "new tab". I have a PC with Windows Vista and have been using Firefox with additional Google toolbar as my preferred or default browser for several years. I have downloaded several updates. I suspect that my version is now 4 or 5. Originally the Google for Firefox new tab feature showing chosen favourite or preferred websites for quick one click access worked fine but I seem to have lost the abiiity or forgotten how to add new such favourites for quick access. The "edit" button there on the bottom left can only delete valuable chosen sites, which then seem to the be lost forever. This edit button is very dangerous! The "bookmarks" and "most visited" tabs listed show a wild coincidental mixture of sites I once visited sometime but have nothing to do with my real favourites or chosen or most visited sites. So I don´t use these bookmark or "most visited" features.

Most visited would not be your bookmarks, but your tab history.
You can check that out via Ctrl+Shift+H then search on ":" (colon without the quotes). Sort on the "Visits Count" (descending) and you will see that they agree.
'''Most visited''' is one of the '''smart bookmark folders''' which are database queries.
'''More information:'''
* [https://developer.mozilla.org/en/Places_query_uris Places query URIs - MDC Docs]
* [https://support.mozilla.com/kb/Smart+Bookmarks+folders Smart Bookmarks folders | How to | Firefox Help]
* [https://support.mozilla.com/kb/Restore+the+default+Smart+Bookmarks+Folders Restore the default Smart Bookmarks Folders | Troubleshooting | Firefox Help]
'''Related information:'''
* [http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox Viewing the browsing history - Firefox - MozillaZine Knowledge Base]
* [https://support.mozilla.com/hu/questions/830859 When I search in "History" for items I've called up, I get a page with the heading "Library." but with no text beneath it. Thanks.]
Google Toolbar is no longer supported in Firefox 5 or newer versions. http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars

How can I add a new column to Grid view under Tests tab

I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
How can I add a new column to Grid view under Tests tab? Thanks Katherine

I don't think this is possible.
Regards,
Jamie

Since installing an icon-editing add-on, I can't open tabs any more / I can only use one tab at a time.

Ever since I installed the add-on Favicon Picker 2 that lets you change the bookmark icons, I can't open tabs any more. The second tab will open, but if you try to go to a site, the FIRST tab redirects to that site. Basically, I can only use one tab at a time. Is there any way I can keep this add-on and use tabs?

Oh, wow - look at that, you're right :) I didn't want to uninstall the add-on as I like the feature, but simply by disabling it you can keep the new icons AND use tabs. Thanks dude!
(The add-on is Favicon Picker 2 0.6.2.15 by the way - some of the user reviews report the same problem.)

How can i add new tab in Business Partner

hi every body,
Present i am working on SAP CRM 3.0 version. i need to add new tab in BP. Here EEWB not available. How can i add new tab?

Hi babu,
you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
i hope this is helpful
Rewards points if helpful
Thanks&regards
kishore kumar

Can we add tab in me27 T- code Screen

Similar Messages

Maybe you are looking for