Can we config the SU as an input field in source of putaway sys-guided ?

Experts,
If i want to do putaway system guided/by TO for SU managed materials , there is nothing that i need to scan in the source field and i can only see the SU,Storage bin input field in the destination screen(Can only config these two fields as input fileds for scanning).So the user has to manually hit F1 save and hit Next to go the destination screen.How should i have the SU field to be scanned in source? (Can we make the SU field as an input field for scanning in source screen?)
Thanks in advance

We have configured both SU and src bin as input fields on RF. Are you using customised RF program or SAP standard? WE have this driven through a mix of stnd and customised referring back to Verifcation Data Profiles and movt assignments in Mobile Data entry configuration of LE->WM

Similar Messages

How to get the vlaue from an input field without hitting the enter button ?

Hello All,
Is there some way to read the values of an input field that was filled in by an user eg ..
String userEntry = wdContect.<UIElement>.value;
So far, I am only able to achieve this using the onEnter property whoch really is not very user friendly since I can only read in the values only if the user hits enter.
Any help will be appreciated. Thank you.
from
Kwok Wei

1. Create a value attribute (MyText) in the controller context
2. Create a value attribute (MyText) in the view context
3. Map view context attribute to controller context attribute
4. Create InputField in the view and map the "value" attribute to the MyText view context attribute
5. Create Action on view (Send)
6. Create Send button and specify Send action as onAction attribute
7. Create executeSend() method on controller
8. onActionSend() implementation:
public void onActionSend(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSend(ServerEvent)
   wdThis.wdGet<controllername>Controller().executeSend();
    //@@end
9. executeSend() implementation:
public void executeSend( )
    //@@begin executeSend()
               // Get MyText
               String MyText = wdContext.currentContextElement().getMyText();

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

Can you change the UseNames to a different field? e.g. FirstName+Lastname rather than displayname?

Can you change the UseNames to a difference field? e.g. FirstName+Lastname rather than displayname?
I have the problem that all our display names are lastname, firstname so when you join if your name is Fred Bloggs it will announce "Bloggs, Fred is joining the confernce" I'd rather it say "Fred Bloggs is joining the conference"
I cannot change the display name used in the AD as lastname, firstname is the corporate standard.

Please refer to http://social.technet.microsoft.com/forums/lync/en-US/839ef1ad-522b-4191-8e90-3e277d318516/ms-lync-ms-exchange-display-name-attributes
You can use ABSconfig from Lync Reskit tools
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

How can i know the number of lines in field-symbol internal table

how can i know the number of lines in field-symbol internal table

Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit

Can I change the default 'File Type' for PL/SQL Source File to '*.prc' ?

Want to change the 'default' extension for PL/SQL source to '*.prc'
When navigating 'File' / 'Save As', and selecting the 'File Type' list box,
The default 'File Type' for PL/SQL Source File is '*.pls'.
Can I change the default 'File Type' for PL/SQL Source File to '*.prc' ?
I have followed , 'Tools', 'Preferences' , 'File Types' and added '.prc' as 'Sql Script' file type, because (PL/SQL Source) is not present in the list.

You can certainly overwrite the 'Save As' extension as you are saving the file. I have added an ER for more control over this functionality.
sue

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Why my JSP page can't get the value of a hidden field

Hi, I got an interesting question here.
I use req.getParameter() method to get a hidden field in Servlet, it works just fine.
However, when I use the JSP to catch the value of that hidden field, JSP just can't, but if I change the type from hidden to text, it works fine again.
the code is as follows:
there are two jsp pages:game.jsp and GameMonitor.jsp.
In game page:
============================================================
<FORM action=GameMonitor.jsp method=post
webbot-action="--WEBBOT-SELF--">Display the names of all the players currently
connected to the server       <INPUT tabIndex=1 type=submit value=Lookup name=B1>
<INPUT TYPE=hidden,value=1 name=p1>
<P></P></FORM>
===========================================================
I want GameMonitor.jsp to catch the value of hidden field "p1" by calling request.getParameter()
the code catching it in the GameMonitor.jsp is:
============================================================
String option = request.getParameter("p1");
          out.println("option=["+option+"]");
          try{
               if(option.equals("1")){
===========================================================
supurisingly, the result is option=[], which means it didn't catch the value of the p1 submitted by POST method.
Does anybody here can tell what's wrong in the code?

Thank you so much, I also found this error, which makes JSP not able to catch the hidden field, however, if I change it to text type, even the comma exists, it still works. pretty interesting!
>
<INPUT TYPE=hidden,value=1 name=p1>Modify the above lline and write like this....
<INPUT TYPE="hidden" name="p1" value="1">
And ensure that you're submitting the form data.
Though nothing much has been changed, just try whether
these help!!!
fun_one

How do you wrap the text on an input field with type="button"

I want to put 2 lines of text on an input field.
The button size is fixed at 75 and if there is more than 10 characters it truncates the text.
The input field is defined as :
<input type="button"
value="CI<br>Discrepency"
class="buttons75x75"
onclick="javascript:callForm('ciDiscrepency');"/>
If you can show me how, I would really appreciate it.
-Gary

Dug up the code I used to do this a while back:
//The style sheet
<style type="text/css">
    .buttonUp {
      border-style:outset;
      border-width:2px;
      width:3em;
      float:left;
      padding:2px;
      background-color:#ccc;
      text-align:center;
    .buttonDown {
      border-style:inset;
      border-width:2px;
      width:3em;
      float:left;
      padding:2px;
      background-color:#ccc;
      text-align:center;
</style>
//... Example buttons
<div class="buttonUp" onmousedown="this.className='buttonDown';"
                        onmouseup="this.className='buttonUp';"
                        onclick="alert('Clicked on Small One');">He</div>
<div class="buttonUp" onmousedown="this.className='buttonDown';"
                        onmouseup="this.className='buttonUp';">Hello</div>
<div class="buttonUp" onmousedown="this.className='buttonDown';"
                        onmouseup="this.className='buttonUp';">Hello World</div>
<div class="buttonUp" onmousedown="this.className='buttonDown';"
                        onmouseup="this.className='buttonUp';">Hello<br/>World</div>
<div class="buttonUp" style="width:5em;" onmousedown="this.className='buttonDown';"
                        onmouseup="this.className='buttonUp';">Hello World</div>You could put any javascript you want on the onclick event, so you would call the javascript you previously used to submit the form and set the input name. In this example I had all the buttons be a fixed width, if you leave out the width in the style sheet then the block will snap to fill the same width as the text inside it, much like normal buttons do. The difference is, with a fixed width then text wrapping occurs automatically (like in the 3rd button) while without a defined width the div will only display a second line when the line break is added. Note the the fixed width can be over-ruled by an inline style if needed (last sample).
The website I pointed to before has a simpler solution (less javascript events needed). An implementation for his approach would be:
//The style sheet
<style type="text/css">
    .button {
      border-style:outset;
      border-width:2px;
      color:#000;
      float:left;
      padding:2px;
      background-color:#ccc;
      text-align:center;
      text-decoration:none;
      display:block;
    .button:active {
      border-style:inset;
      border-width:2px;
      color:#000;
      float:left;
      padding:2px;
      background-color:#ccc;
      text-align:center;
      text-decoration:none;
      display:block;
</style>
//... Example buttons
<a class="button" href="#" onclick="this.blur();alert('Now you clicked linkey');return false;">Hello<br/>World</a>Same deal here with the fixed-width vs.fit-to-content. I add the 'return false;' to the list of the onclick commands so IE doesn't make the 'link clicked' noise and the URL doesn't go to thispage.html#.
All these buttons work in FireFox 2, IE 7, and Safari 3 if they are running in STRICT mode. The button colors and borders don't precisely match FF and IE buttons, but they are close (although they aren't close at all to Safari buttons).

How can I change the content of a text field in a PDF form with a defined variable?

Hello all!
First time poster, and getting pretty frustrated with trying to figure out this one issue. Here is the scenario: I am using Acrobat 10 Pro to design what is essentially a giant order form. I designed the document in InDesign, defined the various buttons and whatnot and then exported it to Acrobat to continue building the form.
I have a Radio Button group called "conference_opportunities" which contains different options at different price points, so they are all named the same, but have different values (so that they belong to the same group and only one can be selected at a time).
What I have done is created a "MouseDown" event on the radio button that sets a variable called "ConferenceOpportunity" which is equal to the title of the option they are picking. I then want to take that variable and display it in a text box called "Conference_Option". I am using a variable because the values of my radio buttons are all the actual prices of the option they are picking, so I can't define the value as the title of the option.
So its an array of radio buttons, and at the bottom of the page there is the Option They Selected, the quantity (which can change) and the value (in dollars)
I also then want to display this variable at the end of the document as a sort of summary of everything they chose to purchase as well but I imagine its the same code.
I am not an expert Javascript person at all, so any code snippets would help greatly. I have looked over the Adobe Document on the SDK and API and have not been able to find a solution. I have also turned to the almighty google and still no luck.
Any help would be greatly appreciated!
Thanks Everyone

All you now have to do is use that variable to the value property of your text field... So add this at the end of your code:
this.getField("Conference_Option").value = ConferenceOpportunity;
Also, I would use MouseUp, not MouseDown.

Can we change the data type of a field based on the value of the field

HI Gurus,
My Requirement is as below -- Could you please guide me
in the Printable Adobe form -- for ex - as usual for dates fields in the Object Pallette the object type is a date/time field and for quantity/currency fields corresponding fields are taken
now in case the either the date, quantity or currency is initial in place of displaying 0.00 or empty date we need to display N/A (Not Applicable)
for this I would like to change the data type of the field
to put it simply --
we need to change the data type of date field from DATE&TIME to Char type to hold N/A or Quantity field to Char field to hold N/A
how can we realize this in SAP adobe forms
Thanks in Advace
Ramchander Rao.K

Hello Ramchander,
     You cannot change the data type of the field at run time in Adobe forms because the type of field you choose at the time of design level is associated with the data type itself.
If you want to achieve your requirement, then your main idea should be to set the data type as CHARACTER itself while designing the field in the adobe form itself. CHAR field will comfortably hold the value of Calculation/amount field, Currency field, Amount, Date, Time HHMMSS, Unit Accuracy, Currency key, Floating point number, Numeric text, Client, Language and many other data types.
After designing the field as TEXT field in Adobe form you have two options.
Option 1:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms.
Suppose the name of the field is TEXTFIELD1, then write the Javascript code on this field in Initialize event as below.
if ( this.rawvalue == null )
     this.rawvalue = "N/A";
If the field is not blank, then it will show the date. Else it will show "N/A".
Option 2:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms. Do the formatting part in ABAP itself. It will increase the performance. Avoid Javascript as much as possible.
Suppose you have a DATE variable l_dats of type DATS. Then take another variable l_date of type CHAR. Then write the below ABAP code.
MOVE l_dats TO l_date.
IF l_date IS INITIAL.
     l_date = 'N/A'.
ENDIF.
Bind the l_date to the TEXT field in the form.
Even in this case, if the field is not blank, then it will show the date. Else it will show "N/A".
But I will suggest you to use Option 2 of keeping the AMOUNT, QUANTITY, DATE, TIME fields etc as CHAR or TEXT fields in Adobe form and do the required formatting in ABAP itself.

How can I get the table name of a field..

Hi,
If we know the table name we can find all the fileds from it
using desc <tablename>.
But, I would like to find table name of a known field's name.
Where all these fields are storing in the database.
THanks in Advance,
Srinivasulu.

ALL_TAB_COLUMNS
rgds, APC

Changing the size of text input field in xml style coldfusion forms

Does anyone know how to get the size attribute of a text
input field to work in a coldfusion xml form?
Example: When I enter the following code and view the form in
a browser, all of the fields are the exact same size.
<cfform format="xml" name="testingform" method="post">
<cfformgroup type="horizontal">
<cfinput type="text" name="first_name" size="10"
label="First Name">
<cfinput type="text" name="middle_init" size="2"
label="Middle Initial">
<cfinput type="text" name="last_name" size="20"
label="Last Name">
</cfformgroup>
</cfform>

Indeed a mistake in the Coldfusion engine. Or is there some
reason for it? In any case, you should report it.
Look in the source, and you will see why it happens. The XML
form makes use of the stylesheet
/CFIDE/scripts/css/default_style.css. There the width attribute is
hard-coded for the cfinput element, thus
.cfInput, .cfTextarea {
font-size: .8em;
font-family: inherit;
width: 200px;
I would replace that block with
.cfInput {
font-size: .8em;
font-family: inherit;
.cfTextarea {
font-size: .8em;
font-family: inherit;
width: 200px;

How can I read the data type of a field in an MS Access database

I need to be able to determine if a field in an Access database is of a certain data type, and if it isn't, to change it to what it should be.
I can't seem to find any way of reading the data type of any field in any table - can anyone give me a metod of getting this info?
Thanks
..Bob

Does <cfdbinfo> work for Access DBs?
You might be better off asking this on a MS Access forum. It's more of an Access issue than a CF one.
Adam

Can we change the state based upon another field value?

I want to change the state to Done when completed work is set to 0. I googled it and came to know about this:
Handle it from the server side, monitoring the WorkItemChanged event. The downside is that it doesn't reflect immediately in the end-user screen. After editing a work item, the user would have to hit Refresh to see the new state.
Will it be perfect in this way? Any other suggestions.
Please provide best links to learn about creating server plugins and depoying.

Hi divya,
For your questions, you can refer to the link that Alexandr mentioned above to check the Pros and cons of custom controls for work item tracking.
And for server side plugin, it has the ability to capture all the occurred events without exception. You can get more information about how to implement it by refering links below:
https://socialtfs.codeplex.com/wikipage?title=How%20to%20create%20and%20debug%20a%20Team%20Foundation%20Server%20server-side%20plugin&referringTitle=Documentation
http://vgaltes.com/index.php/2013/04/14/create-a-team-foundation-server-event-handler/
http://geekswithblogs.net/jakob/archive/2010/10/27/devleoping-and-debugging-server-side-event-handlers-in-tfs-2010.aspx
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can we config the SU as an input field in source of putaway sys-guided ?

Similar Messages

Maybe you are looking for