Can we create multiple admin servers in one one weblogic domain.

Hi All,
Can we create multiple admin servers in one one weblogic domain.
if yes, please let me know.
Thanks

http://download.oracle.com/docs/cd/E21764_01/web.1111/e13716/toc.htm
Not through the configuration wizard.
To handle admin server availability (the admin server is not clusterable). This means that if the admin server goes
down, you cannot administer your WebLogic Server domain until you bring it back up. In most cases, you may
not be too concerned if the admin server goes down because all you need to do is restart it. If you use the node
manager to start the admin server, the node manager can automatically restart a failed admin server just like it can any other server.
What happens if the machine where the admin server runs fails in such a way that you cannot restart the admin server?
The answer is simple if you prepare for this event. Proper operation of the admin server relies on several configuration files
and any application files it controls. Typically, the best thing to do is to store the admin server's directory tree on a shared disk.
As long as the configuration and application files are accessible, you can restart the admin server on another machine. It is up
to you to make sure that you don't have more than one admin server running at a time. If the new machine can assume the
original admin server's Listen Address (or if it was not set), you can simply start the admin server on the new machine without
any configuration changes.
Otherwise, you will need to change the admin server's Listen Address. Since the managed servers ping the admin server URL every
10 seconds until it comes back up, you need to devise a way for the admin server URL to allow the managed server to find the restarted
admin server on the new IP address. The easiest way to achieve that is using a DNS name that maps to both IP addresses, or better yet
that is dynamically updated to point to the correct location of the admin server. If this is a graceful shutdown and migration, use the
WebLogic Console to change the Listen Address just before shutting down the admin server. If not, you will need to edit the config.xml
file by hand to replace the old Listen Address with the new one. Typically, it is recommended to plan ahead so that everything you need is
already in place to make admin server failover as painless as possible.

Similar Messages

Can I setup multiple SMTP servers / emails with one IMAP servers on the iPh

All my email arrives at one place, on one IMAP server. However I have 2 email addresses, and need to use a different SMTP server for each one. How to setup this on the iPhone? This is what I considered so far:
1. I don't see how to enter multiple addresses for the same account, and map each address to a SMTP server.
2. If I create multiple accounts, I have to enter multiple IMAP server, and the iPhone doesn't let me enter the same IMAP server information for different accounts.
3. I could create a second account with a dummy IMAP/POP server, and a real SMTP server. But then most likely if I respond to mails that arrive on my IMAP server (1st account), Mail will always use my 1st email address when responding. Instead I'd like it to automatically pick as From the To address of the mail I am responding to (as the desktop Mail.app does).
Alex

If you have multiple SMTP servers available, you can select from one of the available SMTP servers for a particular account.
After you've entered the SMTP server for the first account when creating the 1st account and you've entered the SMTP server for a 2nd account when creating the 2nd account, you'll have both SMTP servers available to use with either or both accounts.

Can you have multiple Admin Servers?

Are you allowed to have multpile or redundant admin Console Servers?

Yes and no.
If you have more than one admin servers, they will not
be managed by each other. Therefore they can't fail over.
Lynch
"nak" <[email protected]> ¼¶¼g©ó¶l¥ó
news:3c0e8bae$[email protected]..
>
Are you allowed to have multpile or redundant admin Console Servers?

Can XSQL create multiple session variables using only one database call?

Right now if I want to set session variables for username and accesslevel, I code out like this:
<xsql:set-session-param name="name" bind-params="username password">
SELECT DISTINCT USERNAME
FROM LKUP_USER
WHERE USERNAME = ? AND PASSWORD = ? AND ACCESSLEVEL = 0
</xsql:set-session-param>
<xsql:set-session-param name="authlvl" bind-params="username password">
SELECT DISTINCT ACCESSLEVEL
FROM LKUP_USER
WHERE USERNAME = ? AND PASSWORD = ? AND ACCESSLEVEL = 0
</xsql:set-session-param>Is there any way to do it so that I don't have to do multiple queries to the database to set session variables? i.e., something like this:
<xsql:set-multiple-session-param name="user authlvl" bind-params="username password">
SELECT DISTINCT USERNAME,
ACCESSLEVEL
FROM LKUP_USER
WHERE USERNAME = ? AND PASSWORD = ? AND ACCESSLEVEL = 0
</xsql:set-multiple-session-param>Sort of like how bind-params works. Setting bind-params="username password" makes the first ? akin to username and the next ? akin to password.
Is this functionality already in existence?
Thanks!
Malik Graves-Pryor

Not currently possible to collapse into one request without doing it in a custom action handler.
A custom action handler can:
[list=1]
[*]Get the current JDBC connection from the XSQLPageRequest
[*]Get the SQL statement to perform using the function getActionElementContent
[*]Handle any bind parameters specified an a bind-params attribute on the action element by calling handleBindVariables()
[*]Execute and fetch the row from the query
[*]Check to see that the return value of getPageRequest().getRequestType() equals the value "Servlet"
[*]Cast the page request to an XSQLServletPageRequest and call getHttpServletRequest()
[*]Call getSession() on the request
[*]Set the session variables you want to
[*]Close the JDBC statement
[list]
will consider a built-in enhancement for a future XSQL release.

Create multiple portal instances with only one database?

Can someone create multiple portal instances with only one database?
If so, how is this done, just by running the portal configuration wizard?
How are most people running with multiple developers working on portal? Do they share a portal instance, or create their own?
Thank you very much!
Phillip

i'm currently using 9ias rel 2(9.0.2) and i have install one infrastructure and two mid tier, hoping that this will create two portal, but it didn't. Can you please tell me how to do create two portal within one server.
thanks and regards;
andrew

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..

BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

Creating multiple http servers on one machine

I created multiple http servers on one machine.
I did this in the following way:
Created a http service as nt service with the following command:
apache -i -n Testservice -f d:\oracle\isuites\apache\apache\conf\httpd2.conf.
When I start the service, I always get an error:
Didn't return an error. Cannot start service.
Can someone help me.
I need two httpd services as nt service. Because, I want to use oracle fail safe. So I need a service.
Alternative : I can create batch files. But I want to start these batch files as nt service. Is there a possibility on
Windows nt to do this, or an available tool.
Thanks in advance,
Iloon

          "Jason Rosenberg" <[email protected]> wrote:
          >Hello,
          >
          >I am wondering about having multiple servers on one machine.
          >I take it, each server will require a unique ip address, which can
          >be done either by using multiple NIC's or using multi-homing.
          If you want to have multiplie servers in the same machine and you want to cluster them then you need ip for each instance.
          If you want multiple instances without clustering, then you can have them run on the same ip but each one should have a different port.
          >
          >I am asking because I am wondering whether it will always be valid
          >for me in servlet code to identify my current server instance by
          >ip address (InetAddress). Or is there a better way to do this?
          If you are accessing the ejb/services on the same server using a servlet. You can get the context, simply using the default getInitialContext(). This should return the context to the local machine. This shoudnt require any ip information.
          >
          >Jason
          >
          >

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph.
I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature. I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph. Is this possible?
Thanks!

Nice of you to be doing this for your Mother's Thesis.
There are several issues here:
1. A Paragraph Style is what it says, the style for the paragraph
2. You can format text within a paragraph by applying a Character Style
3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
So in answer to your question, no.
You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
Peter
Apple's marketing slogan:
Pages 5.5.1 - Can't Do That!

I have multiple devices (imacs, lap tops and ipads) all connected to a NAS server. Can I create a user for myself and one for my wife, and each have our own apple ID, and Itunes accounts, but all share the same media on NAS drives?

I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?

You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

How can I create multiple sales orders with reference to one contract?

Hello Gurus,
Can you please how can I create multiple sales orders with reference to one contract?
thanks!
Rakesh

hi
Lets consider example
In your contract for line item 1 you have entered qty 100
You careated sales order with 70 quantity, and now you want to creat another sales order for 30
For this first you need to check what is your item category in contract (VA42)
Goto VOV7
SPRO - IMG - Sales and distribution - Sales - Sales document item - Define item categories - Go to change mode
Make the completion rule = B Item is completed after full quantity has been referenced

Can I create multiple instances of realplayer plug-in in one jsp page?

I want to play meny video files in one jsp web page, these video files are to be played with the embeded plug-in of realplayer, each plug-in was linked(use its SRC property) a different video file. But, to my surprise, when I press the play button, every player played the same video file,not its specified file.
I have no idea why it did so and what can I do?
Whether can I create multiple instances of realplayer plug-in in one jsp page, that is to say, each instance is independent of others?
thanks in advance!

Generally speaking, Internet Explorer tries not to launch multiple versions of a plug-in. So what's happening is that you load the first video clip, and then before it has a chance to play, you load the second video clip into the same window. (It's like changing songs in WMA.)
In some cases - this may not work for Real Player, but it's worth trying - if you spawn a new window through a hypertext link and then launch the plug-in in that window, IE will treat it separately. Otherwise, you could not, for example, run two Macromedia Flash applications from different web sites at the same time.
Keep in mind that only one program can access the soundcard at a time, so Real Player may purposely "pause" or "cancel" other video streams until the active one finishes. If you were using the desktop version, selecting another video by any means aborts the currently running video (i.e., RP won't let you create a separate instance of it).
The easiest solution is to create a wrapper JSP file that takes the name of the video clip, and plays it. Call that JSP and specify that it should be opened in a new window via the TARGET keyword in the anchor tag. Then hopefully RP itself won't block a second window from running.

Need help: Deployment of application on multiple admin servers in a cluster

Forwarding this to the weblogic.developer.interest.clustering group as well:
          Hi,
          I have created two admin servers and one managed server on each of them. Then I have added these two managed servers to both the admin servers.
          So I have two admin servers and a cluster having two managed servers.
          Now, if I deploy through one of the admin servers to the cluster cotaining both managed servers, i can see the deployment happening when I log on to the admin server from which I tried the deployment. IF i log onto the other admin server I do not see the deployment happening.
          Interestingly, if I restart both the managed servers from the second admin server, i can see the deployment from the same one but now, if I loginto the first admin server, I see the deployment missing!
          Is this a normal behaviour? Is there any way in which we can see the deployment from both the admin servers?
          Thanks in advance,
          -Sen

Why do you have two admin servers? How many config.xml files exist? Are both admin servers pointing to the same domain if so how is the domain shared? Are both admin servers on the same box? Are they supposed to be the same domain? I'm just trying to understand why it is configured this way.
          -Jesus

Creating multiple Spry menu bars in one site

I've been creating a website and I am required to use multiple templates to manage all the different sections of the site. To make it much less of a hassle, once I created one template, I simply saved that template as another template so I would not have to start all over again. On the first template I created a spry menu bar with a certain amount of buttons. And because I created the other templates with that template, those templates had the same menu bar containing the same settings. The problem is, because of the specified settings of the spry menu bar, if I change the amount of buttons from the original to one less, the whole bar on that template will get off center and messed up because the settings for the menu bar are not set to that certain amount of buttons, but if I change the settings to suite that amount of buttons, then the settings for all the templates change and that messes up the other menu bars on those templates because they have a different amount of buttons. Currently my templates all contain 10 buttons and I am wanting to create a new menu bar with only about 4 - 6 buttons. I thought going up to insert and inserting a brand new menu bar would do the trick but when I did that it inserted a menu bar that had all the settings of the already-created menu bar, (ie same background images, and hovers, etc.) as well as the width which, because the width is suited for 10 buttons, it does not properly make the default 4 button menu bar center correctly. And if I try to change the settings on this menu bar then the same thing happens with everything changing and getting messed up.
So after this long explanation, my question is, how can I insert multiple spry menu bars into one site that are not correlated with each other in terms of all the settings so that when changed, will not affect each other? I am guessing I am having this problem because I created all the templates from one template so they are all interlocked, but the page that I tried to insert the brand new menu bar on was not created from any of the templates and was the first page I made at the very start.
http://phonytrojanmusic.zxq.net/ Here is the link to the site. The first page that opens up is the page that I tried to insert the brand new menu bar on. If you click on band choir or elementary you will see the menu bars with 10 buttons that are all interlocked in terms of settings. Also, I'd like to note that if I delete a button in one template, it does not delete that same button in the other templates, nor does it add a button to the other templates if I add one. Only the physical appearance changes because the settings are meant for only one amount of buttons. Sorry for the novel!

Alright well I just tried to use 2 complete different templates. I created one brand new template from scratch, added the menu bar, gave it an ID of "band", and configured it to suite 10 buttons accordingly. Then I started off from scratch again with a starting html page with a different css style sheet and added the menu bar and gave it a different ID of "choir" but the settings of the two different bars still act as one set of settings! I dont know how to fix this problem. Please tell me what to post if anything will help you. Im guessing the solution is very simple but I have tried everything.
here is the code for the two different menu bars (one in each template)
choir
<ul id="Choir" class="MenuBarHorizontal">
      <li><a href="#">Programs</a>      </li>
      <li><a href="#">Home</a></li>
      <li><a href="#">Blog</a>      </li>
      <li><a href="#">Directors</a></li>
<li><a href="#">Gallery</a></li>
<li><a href="#">Forms</a></li>
      <li><a href="#">Calendar</a></li>
      <li><a href="#">Links</a></li>
      <li><a href="#">Contact</a></li>
    </ul>
band
<ul id="Band" class="MenuBarHorizontal">
      <li><a href="http://phonytrojanmusic.zxq.net/index.html">Programs</a>      </li>
      <li><a href="http://phonytrojanmusic.zxq.net/band/bandmain.html">Home</a></li>
      <li><a href="http://centerburgtrojanmusic.blogspot.com/">Blog</a></li>
      <li><a href="http://phonytrojanmusic.zxq.net/band/directors.html" class="MenuBarItemSubmenu">Directors</a>
        <ul>
          <li><a href="http://phonytrojanmusic.zxq.net/band/directors/cooper.html">Cooper</a></li>
          <li><a href="http://phonytrojanmusic.zxq.net/band/directors/teschler.html">Teschler</a></li>
          <li><a href="http://phonytrojanmusic.zxq.net/band/directors/lee.html">Lee</a></li>
        </ul>
      </li>
      <li><a href="http://phonytrojanmusic.zxq.net/band/shows.html" class="MenuBarItemSubmenu">Shows</a>
        <ul>
          <li class="MenuBarHorizontal"><a href="http://phonytrojanmusic.zxq.net/band/shows/field.html">Field</a></li>
          <li><a href="http://phonytrojanmusic.zxq.net/band/shows/concert.html">Concert</a></li>
        </ul>
      </li>
      <li><a href="http://phonytrojanmusic.zxq.net/band/gallery.html">Gallery</a></li>
      <li><a href="http://phonytrojanmusic.zxq.net/band/forms.html">Forms</a></li>
      <li><a href="http://trojanmusic.org/cal.html">Calendar</a></li>
      <li><a href="http://phonytrojanmusic.zxq.net/band/links.html">Links</a>      </li>
      <li><a href="http://phonytrojanmusic.zxq.net/band/contact.html">Contact</a></li>
    </ul>
I currently do not have any links attached to any of the buttons in the choir bar. Something went wrong and now I have to make the whole site over again so it is not very accessible. Please post back asap!

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

In Oracle 9 Application Server can we create multiple instances???

Hi I need one help this is regarding to the oracle 9 application server in this can we create the multiple instances??
my application was already developed and currently it is working with one instance for this i need to create the another one more instance which is same as existing and my application is web application developed in Forms6i and the db is oracle 9i my requirement is to create one more instance what are all the configuration files need to be modified and please give this info ASAP....

It is still not very clear. What do you mean by creating "one more instance of the same application in the same application server"? By "application" do you mean another instance of OC4J in same Application Server Instance? If yes, you can do that. I mean you can create another OC4J component in same Application Server Instance without doing another installation. Refer this for details:
http://download.oracle.com/docs/cd/A97329_03/core.902/a92171/config.htm#1010793
If you are looking to create another Application Server Instance out of same installation/binaries (i.e. Oracle Home) than the answer is no. You can not create multiple Application Server Instances out of one Oracle Home. You will have to do another installation in a different Oracle Home and that's how you will get another Application Server Instance.
Hope this helps.
Thanks
Shail

Can we create multiple admin servers in one one weblogic domain.

Similar Messages

Maybe you are looking for