Can we send JMS Message to another PC (local machine with out WAS
Hi,
We are trying to send the message from one Pc to another PC.But local machine is having normal java application with out interaction WAS .
is it possible to send the message to another PC with out interaction of local WAS by invoking the objects from another PC.
Reply me ASAP
Thanks in advance
Ni_Min wrote:
I was trying to avoid using emails, because someone has to check his mail box to find the message, he might be busy doing something and never get notified. Is there a common protocol that all machines listen to without me having to installing anything on them to make it work ? Also, when it comes to protocols, what are my choices ?In other words you want to spam people without their consent with messages they're not interested in.
The very reason what you want to do isn't possible is because of the abuse.
What do you think would happen if someone anywhere in the world could just launch a program that sends a "message" to all computers on the internet (which is what would be possible with your idea) and cause all those computers to lock up until the message has been read and actively dismissed by the unlucky recipient?
Now imagine a million spammers, virus authors, and other lowlifes all doing that at the same time thousands of times a day.
Now imagine yourself to be one of them (you are by association already) and someone with a little bit of a short temper who's in posession of a knife and the knowledge of how to make a noose to put around your neck finding out where you live.
Similar Messages
-
HOw do I send messages using my iPad mini without it looking like the messages are coming from my cell phone? And all the responses are sent to my phone as well as my iPad?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
How can I send a message to multiple contacts using "groups".
How can I send a message to multiple contacts using "groups".
It was easy on my sony ericssonn....do i need to download an app?There is no group send option like you are looking for.
To send to a group you have to pick each person you want to send to and send as a group that way. Then don't delete that SMS thread and you can reuse it again later.
As for an app, well SMS works via your carrier and the OS, not something an App can do unless the app send the data to them (a third party) and then they relay it to the carrier. Do you really want to be sending your SMS to some 3rd party first? -
How can i send simple message from PC-to-another device
How can i send simple message from PC-to-another device
just simple message (like command String) not SMS or Data File.
I have a computer with bluetooth and the oter side is Embeded Blue
Thanks.http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
This document details how to create triggers on a table that send out JMS messages.
In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
an alternative idea.
you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db. -
How to send JMS Message from a BPM Process
Hi All
I have small query regarding sending JMS Message from a bpm process. Is it possible to send JMS message from one bpm process to another bpm process.
I have a scenario in which I need to send a JMS message to a queue where another process is listening on that queue and as soon as the message is received on the queue the process instance is created.
I know how to listen for the JMS message on the queue, but I don't how to send a JMS message from a process.
Also Can I create process by sending the Notification to the process instead of a JMS message. But the process to be created is not a subprocess i.e. Can notification be send accross different processes.
Any information or example in this regard would be helpful.
Thanks in advance
Edited by: user9945154 on Apr 22, 2009 7:46 PMHi,
Here's one approach to sending JMS messages from an Oracle BPM process. If you're doing this just to send a message into another process, do not take this approach. It's far easier and quicker if you do this using the OOTB "send notification" logic.
These steps describe how to do this using WebLogic. The steps would be different if you're using another ap server / JMS provider.
1. Guessing you've already done this, but first expose the two required WebLogic jar files for JMS messaging as Java components in the External Resources. The two files for WebLogic are weblogic.jar and wljmsclient.jar” (located in the < WebLogic home directory > /weblogic/server/lib” directory).
AquaLogic BPM JMS Queue Listener for WebLogic 8.1
2. You've probably already done this, but add an External Resource to represent the J2EE container:
• Name: “weblogicJ2EE” - this is important and will be used in the next step
• Supported Type: “GENERIC_J2EE”
• Initial Context Factory: “weblogic.jndi.WLInitialContextFactory”
• URL: “t3://localhost:7001”
• Principal: and Credentials: whatever userid and password you defined to access theWebLogic administrative console.
3. Create the External Resource that represents the send queue configuration. In this example, I'm calling it “WebLogic Send Queue”. This is important - remember what you named it because you will use this name in the logic that sends the JMS message. This new External Resource is configured as:
• J2EE: “weblogicJ2EE” (same name as the second External Resource you created)
• Destination Type: “QUEUE”
• Lookup Name: “weblogic.examples.jms.exampleQueue”
• Connection Factory Lookup Name: “weblogic.examples.jms.QueueConnectionFactory”
4. Here's the logic to send a Message to the Queue
<pre class="jive-pre"><p />msg as String = "Hello World"
jmsMsg as Fuego.Msg.JmsMessage
msg = "<?xml version=\"1.0\"?><Msg>" + msg + "</Msg></xml>"
jmsMsg = JmsMessage(type : JmsMessageType.TEXT)
jmsMsg.textValue = msg
sendMessage DynamicJMS
using configuration = "WebLogic Send Queue",
message = jmsMsg</pre>
Note that the “sendMessage” method uses the configuration parameter “WebLogic Send Queue”. You previously created a JMS messaging service External Resource with this name in the third step.
Again, please don't go this route if you're just using it to send notifications between processes,
Dan -
How can I send a message from database to a J2EE application?
How can I send a message from database to a J2EE application?
If I have a codetable in database that has new or modified values I have to refresh the codetable in my J2EE application.
Most effective way would be send a message to initiate a table reload from J2EE app, but I don't know how to do this.
Now I have a background thread that regular reads the table and looks for changes.http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
This document details how to create triggers on a table that send out JMS messages.
In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
an alternative idea.
you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db. -
How to send JMS message from oracle to weblogic
Hello,
I am facing with a problem of sending jms message from oracle to weblogic. I am using oracle 10g and weblogic server 9.1. Here is the problem. I would like to create a trigger to send JMS message to weblogic server whenever there is an update in oracle database. So I created a java class that will send a jms message to weblogic server. But in that class I use the jndi from weblogic: weblogic.jndi.WLInitialContextFactory
when I use the loadjava utility to load that class into oracle, the status of that class is invalid though this class is working fine in eclipse with the weblogic.jar included. I was thinking because the jndi from weblogic needs the weblogic.jar in order to work, then I loaded that jar file into oracle (it took about 20 minute to load everything) and everything loaded into oracle from that jar file is invalid and missing some reference.
So my question is: how do I send a jms message from oracle to weblogic using a java class with the right jndi?
Any help will be appreciated.
Thanks
TLIt should be quite straightforward to do this. As stated you need weblogic.jar in your classpath, then use 100% standard JMS calls to publish.
Ensure that you set the following properties before getting your initial context:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://node:7001 (or whatever)
this will ensure that the correct JMS implementation classes are invoked.
You can't easily (without some mucking around) build a test implementation in an AQ environment and then deploy to WebLogic because in AQ you don't tend to use JNDI lookups (unless you've implemented oracle JNDI etc) but rather use non standard factory class to create connections etc. -
BusinessService which sends JMS messages to a JBoss 4.2.x server
Hi,
how do I configure my OSB so that I can send JMS messages to a JBoss server? I have added a Foreign JMS server with the appropriate initial context data and have put the jboss relevant jars into my <domain>/lib directory (javassist.jar, jbossall-client.jar, jboss-aop-jdk50.jar, jboss-messaging-client.jar, trove.jar) but I still get an error in the proxy service when it forwards the message to the business service referencing the imported JMS queues and connectionFactory. The message is:
<18.02.2010 18:00 Uhr MEZ> <Warning> <ALSB Logging> <BEA-000000> < [RouteToJboss, _onErrorHandler-1181696354513531347--39bf6a8e.126dc62f38e.-7e57, Log error, ERROR] Error occurred in flow: BEA-380002[JMSPool:169803]JNDI lookup of the JMS connection factory jboss.connectionFactory failed: javax.naming.NoInitialContextException: Cannot instantiate class: org.jnp.interfaces.NamingContextFactory [Root exception is java.lang.ClassNotFoundException: org.jnp.interfaces.NamingContextFactory]RouteToJbossrequest-pipeline>
Am I missing something?
Best regards,
Dimo
PS. I also had to put a newer log4j version in the preclasspath because jboss client seems to require verisons >= 1.2.12 and the one shipped with OSB does not cut itThere is a difference between supported and certified.
ADF was certified (meaning tested) with JBoss 4.0.4.
We didn't test with JBoss 4.2 so we don't know if it works or not.
However it is supported - meaning that if you try to deploy to 4.2 and run into issues you can open bugs with Oracle support. -
Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this???
Check this article: iOS: About Messages
Additional Information
You can change your iMessage Caller ID setting on iOS devices in Settings > Messages > Receive At > Caller ID. Note that the Caller ID setting is used only for new conversations. If you would like to change the address from which messages are sent, first change your Caller ID, and then delete the existing conversation and start a new one.
iMessage responses will be sent from the address the recipient most recently messaged. For example, on iPhone you can receive messages sent to your Apple ID and phone number. A friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if your Caller ID is set to your phone number. -
TS2755 I can't send txt messages to a phone number overseas.
I can't send txt msgs to a phone number in Canada. it was working fine up until a few days ago. I now get a "not delivered" error.
I'm with Optus, and have verified it's not a carrier issue.
When I put my sim in another phone send a txt to the number it is fine.
Put my sim back in my phone, and i get "not delivered"
So far to try and fix the issue - I have updated to iOs7, reset factory setting, restored from backup, deleted and entered the number again, typed the number in directly, deleted the message history.. nothing works!
I am at a loss, and can txt, mms & imessage to everyone else.
Yes the phone number is correct, and has the +1.
I have an iphone 4s, model MD234X/ABlue is for registered iMessage users with an iphone. This service is free. Green is for sending SMS to people without iPhones, and requires an SMS plan with your provider. If you are trying to send an SMS to a friend, and you are out of texts on your phone, it will not send.
Jackson -
XAException during sending JMS message
I'am having following exception during sending JMS message using JMSService to remote OC4J queue:
04/09/15 16:35:02 XAException in errorRollback rollback(c0:a7:9:14:cd:2d:0:0:2a:
0:0:0:0:0:0:0:0:2b:0:ff:2:84:8c:1):
04/09/15 16:35:02 XAException in errorRollback null
04/09/15 16:35:02 XAException in errorRollback rollback(c0:a7:9:14:cd:2d:0:0:2a:
0:0:0:0:0:0:0:0:2b:0:ff:2:84:8c:1):
04/09/15 16:35:02 XAException in errorRollback null
<2004-09-15 16:35:02,717> <ERROR> <default.collaxa.cube.engine.dispatch> <BaseSc
heduledWorker::process> Failed to handle dispatch message ... exception Message
handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.
engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: Transac
tion was rolled back: TwoPhase Commit failed; nested exception is: javax.transac
tion.xa.XAException: rollback(c0:a7:9:14:cd:2d:0:0:2a:0:0:0:0:0:0:0:0:2b:0:ff:2:
84:8c:1):
Regards
JarekHi Jarek,
Is it possible to send us a reproducible bpel package or steps to reproduce? you can send the test case to [email protected]
when you send the zip file could you please rename to .zap extension. I haven't seen this problem before. I want to reproduce this on my development env.
-muruga -
My wife and I both have iPhone 5s, I can't send text messages to non iPhone people that I use to but iPhone people I can, My wife can send text to non iPhone numbers. I have checked and we both have the same settings. Both of our phones are up to date 7.0.4.
The ability to see and send calendar invites is a function of the calendar you are subscribing to and who owns it. We need more information, like what calendar are you subscribing to? MS Exchange? Google? Mobile Me?
-
i can only send text messages to one of my IPhone contacts. How can i change it back? ive tried restarting, deleting contact and adding back, turning off Imessages and then back on. not working
I WANNA SAY IPHONE ONWER PLEASE FORGIGE US AND GIVE DEGRADE OF ISO 7 TO ISO 6
ISO 7 IS BULLSHITTTT
PLEASE DO IT AS SOON AS POSSIBLE....,,,,..... -
I can not send a message to any one of my contacts unless they have an iPhone or I pad how can I sync my contacts to get and receive messages on this I lad mini
iMessage only works between other Apple iOS devices.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Problem in sending JMS message on remote OC4J
I have two OC4J standalone (10.1.3.0.0 build 041119.0001.2385)
The containers work on Windows2000 in different machines connected by the LAN.
The First container has deployed application from example http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-jca-intro/doc/how-to-jca-intro.html
The second container has j2ee application (Servlet) that sending JMS messages in the queue of the first container.
Code Servlet in second OC4J:
package mypackage2;
import javax.servlet. *;
import javax.servlet.http. *;
import java.io. PrintWriter;
import java.io. IOException;
import javax.jms. *;
import javax.naming. *;
import java.util. *;
public class Servlet1 extends HttpServlet
private static final String CONTENT_TYPE = "text/html;charset=windows-1251";
public void init (ServletConfig config) throws ServletException
super.init (config);
String QUEUE_NAME = "OracleASjms/MyQueue1";
String QUEUE_CONNECTION_FACTORY = "OracleASjms/MyQCF";
public void doGet (HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
response.setContentType (CONTENT_TYPE);
PrintWriter out = response.getWriter ();
out.println (" < html > ");
out.println (" < head > < title > Servlet1 < /title > < /head > ");
out.println (" < body > ");
try
Hashtable env = new Hashtable ();
env.put (Context. INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
env.put (Context. SECURITY_PRINCIPAL, "admin");
env.put (Context. SECURITY_CREDENTIALS, "admin");
env.put (Context. PROVIDER_URL, "ormi://host_OC4J_1:23791/jcamdb");
env.put ("dedicated.rmicontext", "true");
InitialContext ic = new InitialContext (env);
QueueConnectionFactory connectionFactory = (QueueConnectionFactory)ic.lookup (QUEUE_CONNECTION_FACTORY);
QueueConnection connection = connectionFactory.createQueueConnection ();
connection.start ();
QueueSession queueSession =
connection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
Queue queue = (Queue) ic.lookup (QUEUE_NAME);
ic.close ();
System.out.println (" Queue: " + queue);
QueueSender sender = queueSession.createSender (queue);
System.out.println (" creating Message: " + queue);
Message message = queueSession.createMessage ();
System.out.println (" Message created ");
message.setJMSType ("theMessage");
message.setLongProperty ("time", System.currentTimeMillis ());
message.setStringProperty ("id", "11111");
message.setStringProperty ("oamount", "55555");
message.setStringProperty ("message", "77777");
message.setStringProperty ("RECIPIENT", "MDB");
System.out.println (" Sending message... ");
sender.send (message);
System.out.println (" Message sent ");
sender.close ();
queueSession.close ();
connection.close ();
catch (Exception e)
System.out.println (" ** TEST FAILED ** < br > Exception: " + e);
out.println (e.toString ());
e.printStackTrace ();
out.println (" < p > The servlet has received a GET. This is the reply. < /p
");out.println (" < /body > < /html > ");
out.close ();
Error: This code send message in The First container, and should send in the second OC4J !!!!
Please answer :
As configure (what code it is necessary to write) servlet (any J2EE the application in OC4J) to use a path to OC4J JMS (remote OC4J JMS) through the Resource Adapter (using OracleASjms.rar). ???I have two OC4J standalone (10.1.3.0.0 build 041119.0001.2385)
The containers work on Windows2000 in different machines connected by the LAN.
The First container has deployed application from example http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-jca-intro/doc/how-to-jca-intro.html
The second container has j2ee application (Servlet) that sending JMS messages in the queue of the first container.
Code Servlet in second OC4J:
package mypackage2;
import javax.servlet. *;
import javax.servlet.http. *;
import java.io. PrintWriter;
import java.io. IOException;
import javax.jms. *;
import javax.naming. *;
import java.util. *;
public class Servlet1 extends HttpServlet
private static final String CONTENT_TYPE = "text/html;charset=windows-1251";
public void init (ServletConfig config) throws ServletException
super.init (config);
String QUEUE_NAME = "OracleASjms/MyQueue1";
String QUEUE_CONNECTION_FACTORY = "OracleASjms/MyQCF";
public void doGet (HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
response.setContentType (CONTENT_TYPE);
PrintWriter out = response.getWriter ();
out.println (" < html > ");
out.println (" < head > < title > Servlet1 < /title > < /head > ");
out.println (" < body > ");
try
Hashtable env = new Hashtable ();
env.put (Context. INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
env.put (Context. SECURITY_PRINCIPAL, "admin");
env.put (Context. SECURITY_CREDENTIALS, "admin");
env.put (Context. PROVIDER_URL, "ormi://host_OC4J_1:23791/jcamdb");
env.put ("dedicated.rmicontext", "true");
InitialContext ic = new InitialContext (env);
QueueConnectionFactory connectionFactory = (QueueConnectionFactory)ic.lookup (QUEUE_CONNECTION_FACTORY);
QueueConnection connection = connectionFactory.createQueueConnection ();
connection.start ();
QueueSession queueSession =
connection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
Queue queue = (Queue) ic.lookup (QUEUE_NAME);
ic.close ();
System.out.println (" Queue: " + queue);
QueueSender sender = queueSession.createSender (queue);
System.out.println (" creating Message: " + queue);
Message message = queueSession.createMessage ();
System.out.println (" Message created ");
message.setJMSType ("theMessage");
message.setLongProperty ("time", System.currentTimeMillis ());
message.setStringProperty ("id", "11111");
message.setStringProperty ("oamount", "55555");
message.setStringProperty ("message", "77777");
message.setStringProperty ("RECIPIENT", "MDB");
System.out.println (" Sending message... ");
sender.send (message);
System.out.println (" Message sent ");
sender.close ();
queueSession.close ();
connection.close ();
catch (Exception e)
System.out.println (" ** TEST FAILED ** < br > Exception: " + e);
out.println (e.toString ());
e.printStackTrace ();
out.println (" < p > The servlet has received a GET. This is the reply. < /p
");out.println (" < /body > < /html > ");
out.close ();
Error: This code send message in The First container, and should send in the second OC4J !!!!
Please answer :
As configure (what code it is necessary to write) servlet (any J2EE the application in OC4J) to use a path to OC4J JMS (remote OC4J JMS) through the Resource Adapter (using OracleASjms.rar). ???
Maybe you are looking for
-
Getting selected row values of a classic report
Hi Guys, i'm using Apex 4.1, I have a classic report on my apex page. First column of this report is check box for row selection. and its binded to primary key of a table. i know that i can get the selected row's primary key (Check box value) using A
-
I want to use my second external hard drive as a "flash drive"
Forgive my ignorance, but I would appreciate any input before I purchase and set up a second external hard drive.... I have a MyBook that I use with Time Machine and it has been great. However, it's approaching more full than I want it to get and I n
-
Vendor Account - Payments made less Tax
Hi Is there a report which shows the payments made to a Vendor less Tax amounts included? Thanks
-
System copy method for BusinessObjects BI Enterprise XI 3.0 (Windows)
Hi, We intend to replicate the same existing BOBJ system for use with another project's development. Does anyone know what is the easiest method of system copy for BusinessObjects BI Enterprise XI 3.0 (Windows)? Will a blank copy through Window's bac
-
App store charge me one dollar for no goods
I was just apple a new spple store account, this account needs file in my full information with visa card number. when i click compelet,it automaticly charge me one dollar for no reason. I am very sure that i did not buying anything. it will ask me t