Can you add one of these range expander to a router that is using a WAP54g as a repeater?

I have a WRT54G router and a WAP access Point that I have setup as a repeater. I am working in a big house and there are still dead spots in the coverage. I was wondering if you can add an expander or another access point to further my range? I know which is cheapest, so which is easiest? and can an expander even work with the current equipment I mentioned?

well , as you already have one wap54g working in a repeater mode and must be knowing the configurations i would recommend you to use another wap54g in repeater which will make the job simpler for you

Similar Messages

Can you add one picture at a time from a camera to iPhoto?

Is it possible to enter one picture at a time from a camera to iphoto?

I use my Eye-Fi SD card to upload one picture at a atime through its "Direct Mode" option. You can connect an iPhone or iPad to the card's own Wi-Fi network and download pictures.
http://www.eye.fi/
http://www.eye.fi/how-it-works/features/direct-mode
-Doug

Can you add one L3-class to two different policy maps ?

Hi Experts;
                Requirement is to have requests from outside as well as inside from different vlan Server to our Production Servers.At present all requests are coming from inside vlan via policy-map multi-match L3_XYZ. See Example below
policy-map multi-match L3_XYZ
class L3_PROD
   loadbalance vip inservice
   loadbalance policy L7_PROD
   loadbalance vip icmp-reply active
policy-map multi-match L3_OUTSIDE
class L3_PROD
   loadbalance vip inservice
   loadbalance policy L7_PROD
   loadbalance vip icmp-reply active
Many thanks
Regards

Hi Hidayat
yes, class map alone doesn't have any deep meaning and can be reused in many policy maps. Actually policy maps can be reused too, so in your particular example you can put the same policy map on 2 different interfaces. (Sometimes it's a good idea, if requirements are the same for traffic coming from both interfaces or if requirements are diffrent - it's better to create a new one, but class-map definitely can be reused.)

Can you add a Purchase Order with Sales Order as its Base Type using DI-API

Is it possible to set the basetype on a PurchaseOrder document line to 17 to create a document as you would using the Procurement Confirmation Wizard in the UI?
I am using 8.81 SP00 PL09.

Anyone?
We already have code to automatically generate Sales Orders using the DI-API, and if we could automate the create of the Purchase Orders as well, it would save a lot of end-user time.
We would like to do it with the Base/Target references set so that end users can navigate between them in the UI.
You can do it with the Procurement Confirmation Wizard, and I would like to know if it is possible to replicate this functionality through the DI-API or if I should move forward by just creating the Purchase Orders without reference to the Sales Order and using a UDF to tie them together.

Keynote- Can you add multiple sound tracks to one presentation

Can multiple sound tracks be added to the same presentation? For instance, can I add one sound track to play for slides 1-20 and a second, different sound track to play starting at slide 23 thru 36?

Jonathan:
You can create a single Story from each track and set the End Jump for each Story to the next one. Set the End Jump of the last Story to your menu and assign the first one to your PLAY ALL button.
Give it a try !
Alberto

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

Can you add cut copy and paste icons to mail toolbar?

Can you add a cut, copy and paste icons to the mail toolbar in macmail?

I guess that these were considered such fundamental operations, each with an already existing variety of operations (mouse, keyboard, right-click, ctrl+c etc) that the Thunderbird devs didn't choose to replicate them again. Similarly, keyboard selection is relied upon a great deal in Thunderbird, rather than adding all the ugly (IMHO) checkboxes that now counterintuitively litter all Windows Explorer displays.
So, if the devs expected you to use ctrl+right+shift to select the current text word by word, then ctrl+c to copy it, ctrl+x to cut it and ctrl+v to paste it would be quite natural, since your hands are already at the keyboard. Similarly, if you prefer to select by mouse, a right-click also offers options to copy, cut and paste, and there is also the possibility to drag selected text, serving cut and paste in one action. So it could be argued that there is no need for buttons.
There used to be additional button add-ons for Thunderbird, but those that I know about don't appear to be under active maintenance and don't currently work with TB 31.0.
You could build your own using a Custom Buttons add-on, but it isn't easy to find the appropriate function call to attach to your home-made buttons. :-(
https://addons.mozilla.org/en-US/thunderbird/addon/custom-buttons/
Here's the code you need if you try this add-on:
cut: goDoCommand("cmd_cut")
copy: goDoCommand("cmd_copy")
paste: goDoCommand("cmd_paste")
(taken from: http://kb.mozillazine.org/Keyconfig_extension:_Thunderbird )
The tedious bit is finding suitable icons; the defaults are pretty but unhelpful coloured stars.

Can you add multiple soundtracks to a Keynote show?

I know you can add one but can you add several? How?

Yes it is but I hit a glitch, they tell me to use the QuickTime inspector to create a sound for one slide only. Once you click the QuickTime icon the second command is " Click the movie or sound object to select it" I am assuming they are telling me to select the sound file, and drag it into the audio box in the inspector,,...when I go back to the QuickTime icon the controls are still grey,..what am I doing wrong,..the wording of these things leaves a lot to be desired,....if you try to select it while in the QuickTime filed the field dissappears,...confusing....

How large of an Ethernet Switch can you add to an Airport Extreme gigabit router?

I have a gigabit Airport Extreme router. I like using the Airport Utility to control my network. I want to convert a large number of wireless connections to wired ethernet devices, about 24. The reason is that I just get too many wireless dropouts, and I need a more reliable network. I am looking for the best way to design this. It seems like adding a gigabit Ethernet switch is the easiset and best way to accomplish this. My questions are:
1. How large of a gigabit switch can you add to the LAN port of an Airport Extreme: 24-port, 48-port?
2. How far down can you cascade switches? In other words, can I connect three 5-port switches (level 1 switches) to the three LAN ports on the Airport Extreme, and then connect more 5-port switches to the level 1 switches?
3. What are the performance implications for either design. Can you achieve gigabit performance with these designs?
Thanks for the help.

I have a network with an Extreme base station, 3 Extreme wired extenders and 1 express wired extender - in the mix are four 24 port gigabit switches and two 8 port gigabit switches - so you can add as much as you want within the limits of the internal IP address range which is controling the number of devices on the network.

How can you make one button preform different actions in Xcode?

How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

How can i add one month to a date variable ?

Unlike the week which always 7 days, month may change from 28 to
31, so how can i add one month to a date variable ? Thanks in
advance.

Adding 365 won't always work because of leap years.
You could use the following SQL statement:
SELECT
     TO_DATE(
          TO_CHAR(TO_DATE(SYSDATE), 'DD-MON-') ||
            (TO_CHAR(TO_DATE(SYSDATE), 'YYYY') + 1)) NEXT_YEAR
FROM
     dual
NEXT_YEAR
08-JAN-03Or you could create your own function. You would use this
exactly like add_months:
CREATE OR REPLACE FUNCTION add_years
     (v_date DATE, num_years NUMBER)
RETURN DATE AS
     v_year DATE;
BEGIN
     v_year := TO_DATE(
               TO_CHAR(TO_DATE(SYSDATE), 'DD-MON-') ||
                     (TO_CHAR(TO_DATE(SYSDATE), 'YYYY')
                                         + num_years));
     RETURN v_year;
END;
SELECT
     add_years(SYSDATE, 1) new_year
FROM
     dual
NEW_YEAR
08-JAN-03
SELECT
     add_years(SYSDATE, -1) new_year
FROM
     dual
NEW_YEAR
08-JAN-01

How can you add an image in Mail without being an attachment?

How can you add an image in Mail without being an attachment?
In otherwords I'd like to put my logo in the email not as an attachment but as an image.
Is there a simpel solution to this problem?

PBN1 wrote:
How can you add an image in Mail without being an attachment?
You don't.
It's not possible. The e-mail protocol is designed for text; anything else has to go as an attachment.
Different mail clients (such as Mail.app, the mail client bundled with Mac OS X) may have different ways of handling such attachments, but they are still attachments. Each mail client has its own rules and methods, so one may display a picture as if it were in the body of the message, but another client may do something completely different.
A way of faking it is to format your message in HTML (which is a kind of text). The image is hosted on a remote server, not added to the message; instead, you include a link to it in the body of the message, as you would when building a web page. (This is also what the two tips helpfully provided by X423424X do, except that the link to the image is added in the signature, rather than the body of the message.) What exactly happens to it is, again, at the discretion of the mail client. In my case, for instance, displaying images in HTML messages is turned off, and will stay resolutely off.

How can I add one seat for a single app to a team account?

We currently have a team for our art department, which needs Photoshop, Illustrator, In Design and Acrobat. We have other departments that just need Acrobat. How can I add one seat, that has access to only one App so I'm not paying the full price?

Did you ever figure this out? I need Photoshop single licenses and Adobe is making this ridiculously difficult...

Can you add apps to iPad open in list

Can you add apps to the open in list of an iPad

As far as I know, you cannot add apps to the Open In list using any setting or built in feature in iOS. This is controlled by the iOS itself. IIRC, you can delete apps from the iPad that appear in the Open In list in order to make room for apps that you would like to appear in there, and if you continue to use the apps that you want to add to that list, eventually they will appear in the list. I believe that the more that you use one particular app, the more likely it will be for it to appear in the Open In list.

How can i add one wave in in our Function generator example?

how can i add one anotehr wave in our function generator example. i want to use superposition and add one more wave to our first wave in function generator and see the result.thanks

Hi hood1,
2 options:
1) You can add many waveforms by combining them into one Array.
2) Use the Waveforms tools, that give you many option for adding waveforms. one after the seconed or adding the Y array of a waveform to other Y array of second wave form, and so on...
Hope it Helps...

Can you add one of these range expander to a router that is using a WAP54g as a repeater?

Similar Messages

Maybe you are looking for