Can you choose what browser to preview Muse in?

I'd like to have the option to preview in a browser other than Safari in Muse.  I can't seem to find anywhere to select a different browser.  Any ideas?
Thanks,
BC

It is based on your computer settings not Muse settings.
Not sure on the Mac but on the PC you set your default programs in Control Panel under Default Programs, then choose your browser, at that point Muse will open the file based on your choice.
I assume you access the System Preferences on the MAC.... maybe Accessibility or under General... not sure though

Similar Messages

  • When restoring phone from iTunes backup can you choose what to put back on phone?

    I got the iPhone 6 Plus and instead of restoring from iCloud backup I have to restore from iTunes backup, but I don't want to include my music just to have some more space left on my new phone. Is there a way to restore without my music??

    Perhaps I've just confused everyone. In iTunes your media can be checked or unchecked.  Unchecked items are usually not synced. By unchecking media in the library before restoring a device that was previously set up to include media it should be the case that no media is restored during the sync. Once the restore is complete you can then adjust sync options, recheck your content and sync your new selections. Since an entire class of media can be checked or unchecked with a simple ctrl-click this has the potential to speed up the restore phase considerably.
    tt2

  • Can you and if so how can you choose what's in the control center?

    Switch airplane mode with something else

    There are no settings for the Control Center. What you see is what you get.

  • Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

    Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

    Hello.
    Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
    Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
    I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
    Eg    ftp.domain.com:21
    Please try the 2 suggestion above and let me know if it works.
    Regards
    Vivek

  • I've a Pc with Win7. Is it possible to view the movies I've there (and listening to the music also there) in my TV using Apple TV? And navigate in the web? Can I choose my browser?

    I've a Pc with Win7. Is it possible to view the movies I've there (and listening to the music also there) in my TV using Apple TV? And navigate in the web? Can I choose my browser?
    I'm just starting in this area so please explain in detail.
    Thanks.

    Welcome to the Apple Community.
    You can't browse the web on an Apple TV
    You can view any content that is in your iTunes library on the PC via the Apple TV if it is in the correct format.

  • HT4889 Can I choose what to migrate from one mac to another mac?

    Can I choose what to migrate from one mac (Powrebook G4) to another mac (New iMac)?  I do not want everything to be migrated, as some programs are not compatible with Mountain Lion or an intelIntel mac!
    As it is a brand New iMac I would also like to keep it clean of unnecessary files that have become  imbedded in the Powerbook over its time.Therfore it would be nice if I can pick and choose what is to be transferd. If you can give me a heads up on if and how it would be appreciated!!!
    Thanks
    PicMac

    Thanks for your input!… I have now come across an Article from Apple 
    Migration Assistant tips and tricks
    http://support.apple.com/kb/HT3231?viewlocale=en_US
    Controlling what is migrated
    With Migration Assistant you control the data that is migrated from another Macintosh computer. By clicking the triangle next to a user's name, you can select which User Accounts to migrate and choose which folders to migrate. You can also choose whether to migrate Applications, Network and Computer settings, or Volumes. Migrating only what you need can reduce the time it takes to complete your migration.

  • In Indesign 2014 can you scroll through fonts to preview like you can in photoshop

    In Indesign 2014 can you scroll through fonts to preview what the font will look like as you can in photoshop

    http://indesignsecrets.com/test-font-choices-quickly-indesign-cc.php

  • Can you burn what  you create in idvd to a usb stick or sd memory card

    Can you burn what  you create in idvd to a usb stick or sd memory card and if so how?

    on iDVD, click HELP on the menu bar.
    Than click iDVD Help
    Than click: Saving a project and burning a DVD
    Than click at "saving a projekt" Creating a disc image of a project
    Follow the instructions
    Choose USB drive or menory card as target.
    Lupunus
    Edit: If you want the image as ISO on your drive, use disk utility to create a CD/DVD master from the image and rename the file extension movie.cdr afterwards from cdr to iso
    Message was edited by: lupunus

  • Can you customize what folder MAIL goes to when adding attachments?

    Can you customize what folder MAIL goes to when adding attachments?
    My friend has 2 email addresses for businesses.
    He has invoices in folders for both, and wants to set up the Mac like this:
    When he writes from one email address and attaches documents - he want the Mac always to go to the corresponding folder for that company of his. Same for the other email address...
    Make sense?
    Can this be done?
    Thanks in advance....

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can you choose email address for autofill?

    Hi all,
    Searched and could not find an answer.
    Can you choose which email address you would like to autofill when completing a form (that is when you have more than one email address in your address card)?
    Thank you.
    S

    Hello:
    I looked as well and could find nothing specific.  I suspect it picks the first one with no other options, but since I have only one, I cannot say for sure.
    Barry

  • Can you change the extensions in Adobe Muse from .html to .htm?

    Can you change the extensions in Adobe Muse from .html to .htm?
    I'm updating an old site where the extensions for the pages were all.htm. This means that when I upload the site index.htm is not being over written by index.html.

    Hi,
    It is not possible to change the extension in Muse at the moment. You can export the site as HTML and change the extensions outside the Muse.
    Regards,
    Aish

  • Can you change the tab order in Muse forms?

    Can you change the tab order in Muse forms?

    Hi Rebecca,
    By tabs do you mean the form fields? If yes, then you can simply rearrange them by repositioning the other fields using mouse.
    However, the e-mails that are received on submission of the forms show the original sequence of the fields.
    Regards,
    Neha

  • How can you tell what GB a handset is...I'm buying iphone6 second hand

    HHow can you tell what GB is in an iPhone 6 ....I'm buying second hand

    the most reliable way is to go on the phone and tap
    Settings/General/About - that will tell you the capacity (among other things)
    but remember the actual space wont be what Apple advertises - my 128 GB iPhone 6 + says it has 114 gb of space - there is formatting and the operating system to take into account
    the size is also printed on the back of the original box but unless you have the phone and get get the serial number off the phone (which is in that same location) you cant be sure the box is from the phone you are trying to buy

  • How can you tell what pictures from iPhoto you already used in iMovie?

    how can you tell what pictures from iPhoto you already used in iMovie?

    Log into your account on a computer (iTunes>Store>View Account) and go to Purchase History

  • How can you tell what generation apple tv you have?

    How can you tell what generation apple tv you have?

    Apple TV 1. gen: http://www.apple.com/de/support/appletv/1st_generation/
    Apple TV 2. gen: http://www.apple.com/de/support/appletv/

Maybe you are looking for

  • Jdev 11g Production - Unable to edit EO/ VOs from Application Navigator

    I created an ADF Model project. In this project I created ADF's 'Business Components from Tables' using the wizard. I went through the wizard and created EO, VO, AM and business diagram. After that, I was able to execute the AM (right-click and Run),

  • Error while creating fields in the Category Structure Urgent

    Hii, I am getting the Error while creating the Category structure fields Error Message : Entry YF_COU   does not exist in CABN - check your entry Message no. 00058 Diagnosis Input values must be defined in Table CABN. The value or values 'YF_COU ' ar

  • Should I use the default video drivers or should I install ATI drivers?

    I have a macbook pro with the ATI card in it. Should I download and use the ATI drivers that they provide on their website? Am I going to see benefits or should I stick with the drivers in the recent bootcamp update? thanks

  • Re: encapsulate ATMI into JNI calls

    Didier: you may want to check out Anthomy Fryer's "TUX++", a C++ encapsulation of the TUXEDO API from 1999 (includes a Visual C++ Proyect to build the DLL), at http://www.geocities.com/Pipeline/Dropzone/6294/tuxobjs/tuxoview.htm. Best regards Thomas

  • How to use Speedfan

    I made up a little guide here for those of you looking to use Speedfan to control the fans in your system. Note: Speedfan is not guaranteed to work properly with all motherboards so use it at your own risk. Go to http://www.almico.com/forummotherboar