Can you modify the dimension of  a slide for a project?

Hi,
I'd like to know if you can modify the dimension of a slide within a project?
I am aware you can Modify-> Rescale Project
That does it for the whole project, but what if I wanted to add more length to slide 6 only? 
Please advise if that is possible.
Thank you!
Susanne

No, all slides have the same resolution, which is normal IMO for a file that is published as a movie. Maybe if you explained what you want to achieve?

Similar Messages

  • Can you modify the price of a contract in the ME32K directly from the item

    Hello,
    I am in ECC6.0
    I need to modify the price of an item in the contract (ME32K WK or MK) but it is grey (only in display). So I must do Item-Condition and then I can modify the price of the item.
    Can you modify the price of a contract in the ME32K directly from the item screen?
    I have try with several field selections but nothing.
    AKTV     Change
    MKK     Quantity contract (for MK)
    WKK     Value Contract (for WK)
    PT0K     Standard item contract
    Cheers,
    Marta

    HI,
    If you maintain any condition in the contract line item condition, like freight, discount etc. the landed price gets populated in the line item price field. So if you want to make any change in base price, it has to be changd in the line item condition.
    This is because, You can maintain different validity period in condition and maintain different price in each validity period. So which price you want to pick? So the system captures the price from condition and populate it in the item price field depending on the validity period price.
    Hope this helped you.
    Regards

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • Can you use SQL as a data source for a project in the same way you can in Excel?

    Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
    the data from the stored procedure as a series of tasks?
    Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
    it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

    No, You can not use sql as a data source for a project.
    You have 3 options to achieve it:
    1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
    2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
    3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
    create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
    kirtesh

  • Can you change the theme color in iMovie for example from its current color of blue to red?

    Can you change the color of a theme in iMovie ?- example: the sports theme is set to be blue and I would like it red.

    No. And that would be nice in your type of example.
    I would recommend that you could TRY to use the "Map, Background & Animatics" earth icon> (next to transitions tool tab), scroll down> add RED background, and ADD Transitions inside some. That might help your example out.
    Hope this helps. Cheers

  • Can you save system settings scratch disks locations for each project?

    When you begin a new project in FCE you need to set the System Settings Scratch Disks. Typically you would set a new folder for each project to keep all of your files for each project in one location for that project.
    I have a couple of FCE projects going at the same time. I've set each project with a different system setting scratch disk location. But if I open a project which should have a unique scratch disk location folder that I've already set before for that project, it ignores the setting I set for that project and just shows the scratch disk setting for the last project opened instead. It does not appear to save or remember the unique setting for that project.
    If you have multiple projects going at the same time, is there a way to save the systems settings scratch disk location for each project and have FCE remember that location for each project?

    I turned off the Open Last Project on Application Launch in the User Preferences and it still does not remember the unique scratch disk settings for each project.
    Since it is quite common to be working on multiple projects simultaneously, you would think that there would be a way in which to save the settings for each project to help keep all related files better organized.
    Any other suggestions?

  • Can I modify the Quiz Question default slides?

    In a quiz:
    1. Can I remove the Review Area on question slides?
    2. I seem to be able to manually remove button (such as the Clear button), but I can't copy and paste a button from one slide to another. Is there a way to do so?
    Thanks,
    Jeff

    Hi Jeff,
    The Review area is not meaning a lot any more, because most of the Review information is in the check marks for correct, given and incorrect answers. It is seldom used. I would not remove it.
    If you want to remove something from question slides, don't delete them but uncheck in the Options accordion of the Quiz Properties panel.
    Buttons on question slides are embedded in the question slides, they do not have a separate timeline. Same for the captions like Type of Question, Question, Answers. Do not delete them or you could cause a lot of problems. For that same reason you cannot just copy/paste those embedded objects at all. If you want to change the properties, the location, size, you can use the Quiz master slides and or the object styles for quizzing objects.
    Lilybiri

  • Can you modify the default columns displayed in standard lists?

    Hi,
    Is it possible to changes the columns displayed in the standard out of the box lists? e.g. All Companies.
    After making our customisations most objects need to have their standard list columns modified and I do not really want to have to re-create all the standard lists we want to use in order to get relevant columns displayed?
    Thanks for the help.

    Hi,
    I don't believe you can modify the out of the box lists without recreating them.
    Not sure if this will work for you, but a possible workaround would be to use Search Layouts to achieve your desired result. For example, if you were to modify the Search Layout for accounts to reflect all the relevant columns you need to display, then a simple search for "*" as the Account Name would result in a search for All Accounts in the list format you wish to see.
    Hope this helps.
    Regards,
    Cameron

  • Can you modify the roll-up schedule for child servers into the parent?

    We have one parent server (which server some clients directly) and two child servers.  There appears to be a large delay (maybe 2 hours) between when a server reports into a child server and when that update reaches the parent server.  We would
    like to be able to query the master server on patch night and get an up to date accounting of patch status without having to wait for the roll-up.  Is there any way to change the roll up interval or to force a roll-up on demand (say right before generating
    a report of approved patches)?
    Tom

    Here is the scenario:  The clients are set for a 3 hour detection frequency, and on patch day the patches are approved at least 3 hours before the earliest patch time.  The first patch window starts at 8:00PM on patch night and the servers are
    set to patch and reboot, so they start installing at 8:00 and after they finish and reboot they always report in to their reporting server within a few minutes after startup.
    This scenario is almost certainly doomed on principle from the start. Consider the following sequence of events that must occur between the time you approve the updates on the USS and the client system wants to install the update (at 8:00pm).
    The USS WSUS Server downloads the files for the approved updates from Microsoft. (This could run from minutes to an hour or more depending on the number of updates and available bandwidth, and I'm considering a liberal Internet connection for this activity.)
    The DSS WSUS Server(s) synchronize with the USS. The first sync event following the completion of any given update download will trigger the download of that file to the DSS as well. (How often your DSS syncs will drive this delay.)
    The DSS completes the download from the USS. (Like #1, this could run from minutes to hours, depending on the number of updates and available bandwidth.)
    The client system executes a detection with the assigned DSS and discovers that an approved update has a file available for download. (How often your client executes a detection will drive this delay, and even with a 3-hour detection, the client only has
    max TWO possible opportunities to find these updates between 10am and 8pm.)
    The client system completes the download from the DSS. (And these downloads must be completed BEFORE 8pm in order for the WUA to actually schedule the updates to be installed.)
    As such, the practicalities of getting from approval (even assuming mid-morning for that event) to fully downloaded by 8pm (so a total time span of ~10 hours end-to-end) is flirting with failure.
    For best results to make your 8:00pm installation time, you really need to approve the updates at least 24 hours in advance, and to ensure they get to the replica servers, probably closer to 48 hours in advance, all depending on what the actual
    DSS synchronization interval is, and the available connection bandwidth between the DSS and USS, and the USS and Microsoft.
    We would like to be able to see if all servers have patched as soon as possible after 8:00PM so we can start troubleshooting them and get them patched.
    The first hurdle here is when those systems are restarted after the updates are installed (assuming that the updates have actually gotten to the client system in time to be installed at all). The client system reports back to the assigned replica WSUS server
    following the restart. That state information is then uploaded to your upstream WSUS server during the next DSS server synchronization event. In addition, the reporting events from both the client-to-DSS and DSS-to-USS are processed asynchronously inside the
    database.
    The only way you could get that data "as soon as possible" is to set the client detection frequency to 2 hours, the DSS synchronization to 12 times per day, and even then, there's a potential delay of up to four hours between client restart and the
    availability of that status data at the upstream WSUS server. In order to get anything more "real time" than this, you'd have to implement a managed deployment tool such as
    SolarWinds Patch Manager.
    Furthermore, there are significant disadvantages to having 2-hour detections and 12x daily synchronizations, in terms of the amount of noise generated in the form of "events" reported at each of those activities a dozen or more times a day.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • How can you increase the speed with a slider

    I have been trying to work at this for about a week and a
    half. I browsed several communities but it seems that noone has an
    answer so I am not even sure if this is possible I am not a flash
    expert but what I am trying to do is as follows;
    I have a movie with several movie clips. I have an animation
    of a female walking, I also have a slider that when I move it to
    the right bags are added on to her. but what I am also trying to
    accomplish is to have her walk faster as the slider moves to the
    right.
    I tried several scripts but they seem not to work as I wan
    them to plus they start to cancel out the bag function.
    How could I make this happen if it is even possible. I want
    to use the slider to increase the speed of the lady walking. Slider
    and Lady are movie clips.
    thanks in advance

    At present I'm not aware of any way to achieve this exact effect in Muse (where the first screen of a web page is resized to fill the browser window and the rest of the page, as you scroll down, appears to be fixed height layout).

  • TS1398 can you change the connection order in iOS for known networks

    Is it possible to change the order of preference for known Wifi networks.
    When I turn on Wifi at home it selects the BT fon connection not the private network connection because the Fon connection was set up after the private network.
    This gets annoying as it prevents connection to other devices in the house, without changing the selected network.
    Help would be appreciated
    Cheers

    Take a look at the FormsCentral Forum.
    or
    Guessing you mean the order of columns in the 'View Responses' tab.
    If that is correct - click anywhere within the data in the 'View Responses' table
    Click on the heading (eg next to the letter / name at the head of the column) of the column you wish to move. Release mouse button.This should highlight whole column. 
    now click again in same area, and holding the button down, drag it wherever you want it to appear. (you should see a yellow marker appear at the insertion point).

  • Can you spot any glitches in this workflow for my projects

    I have been going back and forth on this topic of what format to use for my projects and have proposed various solutions which have not worked out because of some issue I overlooked. After much thought and a lot of reading, I came up with this one: I want to produce dvds for computer viewing only, using FCP HD and DVDSP 3. I'm using graphic sources ONLY, created in Motion 2 and Photoshop CS2 with music files created in Logic Pro 7, no footage. I plan to use the DVPro HD 720p 24 for the format in FCP and Motion. Since I am not using captured footage in the projects, I thought I could use just the portion of the area of the 720p screen that I would need for DVD output, which is 720 x 480, by marking it off with guides. All of the graphics from Photoshop and Motion would be brought in at the regular 720p dimensions but the content would be only in the same 720 x 480 area of the screen. When the project is done I would export it as a Quicktime movie at full size and bring it into Compressor 2. I would then use the setting for preparing it for DVDSP but I would crop the size to just that same 720 x 480 area where I limited my content. My hope is that because the dimensions are those for NTSC DV, that my pixel aspect ratio will remain square and not getsquished, and with progressive scanning it will look fine on a computer screen. Does this plan sound like it will accomplish the result I'm looking for?

    The lumina shifts out of the wipes are a result of the H.264 encoding...it isn't on the original footage. I can't figure that one out...I tried exporting out of FCP, converting with QT AND Compressor and got the same result. Scratching my head there...
    The 3-way CC was good in many cases, but when it came to the marsh grasses, it had some difficulty. Mainly in separating the blues and greens, and getting rid of the general haze of the shot. MB and CF were able to dig out the colors, but yes, Magic Bullet had more...vivid sepiad colors. That is a result of using the Color Reversal template and futzing with it, and my inexperience with MB. Color Finesse was much more familiar to me, and I was able to get STUNNING results. This is why I chose that shot for CC, because it appeared to need the most work.
    I was able to get better results with the 3-way with other footage. Most of the other footage was shot with a distinct blue tint to it, but that is easily fixable.
    I don't fault my DP too much. I asked for test footage to play with, and he did a days work, on his own time, for me to work on. The other stuff I was previously working on was for a project I am just wrapping up, and the footage was not allowed to be posted.
    All in all I feel this footage has a very cinematic feel. It is easy to work with at full resolution, doesn't take up all that much space and very very pretty to look at. The big issue that will arise is the fact that the 23.98 timeline offers ONLY NDF timecode...not DF. I have to deliver a 59.94 d5 at 10-bit uncompressed, and that allows for DF, but my timing will have to be adjusted. Just how it will is something I will be exploring as the projects plods on.
    Shane
    "There's no need to fear, UNDERDOG is here!"

  • Can you modify the "paper" background of Dark Room?

    is it possible to make the whole Dark Room page black and to get rid of the "grey paper" background. Unlike other templates, a portion of this seems impossible to customize.

    Wow, you're right. Normally they don't do that, but they have that image locked in the XML. Sometimes you can drag your mouse over those and select them, but that one is actually locked. The only way to unlock it would be to edit the theme XML and remove the sf:locked="true" from that particular object. Then you could delete it off the page. Not sure there's another way. Trying to cover it doesn't work in the nav bar.

  • List of Values - Can you modify the width of the return value?

    I have a page item that is a Select List. Some of the display and return values in the list of values are up to 500 characters in length.
    My client is fine with viewing the list in its entirety (full display width) within the select list, but is asking if there is a way to wrap the text on the screen once the value is selected/returned. Is this possible?
    Thank you,
    Laura

    Thank you very much for your response. The problem is that I have many of these select lists on this one page and others, so I would have to go through the entire application and create all these display only fields. Was hoping there was someone to manipulate the width (wrap around capability) of select list field itself. Thanks, Laura

Maybe you are looking for