Canadian Postal Code rejected.

When requested to enter my Postal Code, system will not allow entry of the code. Has anyone else experienced this?

I've never had a problem entering my postal code on any website I've been to.
However, sometimes you must enter them without a space. Sometimes the space is necessary. It depends entirely on the form that you're filling out.
Ex: A1A 1A1 needs to be entered as A1A1A1.
Provide a link and I will try mine.
--Travis

Similar Messages

  • I Can't make the Geocoder handle Canadian Postal Code properly

    Hi !
    Does any one out there was able to approprietly setup Oracle Geocoder to properly return canadian postal code for a specific address in a dense urban area ?
    In Canada, a single street segment can have two different post codes when located in dense urban areas such as Montreal. One on the left and one the right... so one for odds number and one for even numbers.
    I don't see how to acheive this in the actual Oracle Geocoder table structure.
    I see two solutions to my problem. In order to appropriatly return a canadian post code for a specific address, Oracle would need to
    (1) have the GC_ROAD_SEGMENT_CA table have a L_POSTAL_CODE AND A R_POSTAL_CODE field. Thus returning the good postal code knowing if the house_number is odd or even.
    OR
    (2) have the GC_ADDRESS_POINT table have a POSTAL_CODE field allowing to directly return the postal code associated with an address.
    Any help would be greatly appreciated !!
    JB

    Hello,
    subscriber := sys.aq$_agent('sender', '[email protected]', NULL);
    should be
    subscriber := sys.aq$_agent('reciver', '[email protected]', NULL);
    With your enqueue code the message is being made available for any default subscribers. As it stands the message will be propagated to the target queue and made available for the consumer sender.
    So if you change your dequeue code to
    dequeue_options.consumer_name := 'SENDER';
    it will consume the message that has been propagated.
    Thanks
    Peter

  • Hen verifying my billing information it will not give me the option to select a Canadian postal code.

    While trying to purchase an app from the app store it directs me to verifying my billing information and after entering all the inforamtion when I get to entering my address it does not give me the option to select a Canadian postal code or province.  Please help.  Thanks

    This is a huge pain in the ***! Don't these clowns know their product is also sold outside the usa?

  • Entering Canadian postal code - changes it to a number

    When I enter the first part of my postal code M4J into a form - safari changes it to 4-1. I can't find any preference settings that would cause it to do so, but this has happened twice on two different web forms. Any ideas as to how I can get it to recognize the Alphanumeric postal code.

    one rumor I have heard is that if you take the postal code off your card in address book, it will allow you to correctly fill in your code manually. I don't have a canadian postal code, so I can't verify this myself.

  • Power Map Locations for Canadian Postal Codes showing incorrectly

    I see great potential in the possibilities of using Power Map. However the location for one Canadian postal code is showing incorrectly on the resulting map. I have verified that the postal code itself is correct and my data has been entered correctly and
    it is below:
    N6K 0B3
    It is showing nowhere near where it is supposed to be. Users of the application have to have confidence that the mapping behind it is correct. I need to create maps for each poll for volunteers to retrieve
    the signs post-election and don't want to send them to the wrong locations.
    By the way, why is my font size changing if I modify the text in my post?
    Thanks,
    Lila

    Ahh Geolocations are fun, aren't they!
    Bing maps is showing N6K 0B3 as just south west of London, ON. Google maps shows it north of there, West of London. If Bing is not correct, you'd need to request a fix from Bing/Microsoft.
    While you wait for that, you'd have to create your own kludge to correct it:
    CASE WHEN postcode = 'N6K 0B3' THEN geography::Point(-81.437296,43.0041629,4326) ELSE bingsGeospatial as geoPoint
    I was in talks with Canada Post regarding acquiring their geo location data for post codes a while ago. You can get a product from them for about 7500 a year. I was rather disappointed to find they only provided points, and not bounding boxes (as google
    maps does).

  • Validation of Canadian Postal Codes

    Canadian postal codes follow the A9A 9A9 format.
    In my display validation pattern, I have  text{A9A 9A9}
    In my edit validation pattern, I have text{A9A 9A9}|text{A9A9A9}
    In my validation pattern, I have text{A9A 9A9}
    I also have a JavaScript validation running client side.
    It reads:
    form1.#subform[0].Section1.PostalCode::validate - (JavaScript, client)
    this.rawValue = this.rawValue.toUpperCase();
    Given these paramaters, I am stumped as to why I keep getting the following validation error: "The value you entered for Postal Code in valid."
    Any thoughts?

    Your uppercase code should be on the exit event of the field. The validation pattern works by testing against the display pattern.
    Or you could put xfa.event.change = xfa.event.change.toUpperCase(); on the change event of the field.

  • Canadian Postal Code problem with Autofill

    I have 2 problems with my Postal Code when filling out a form with Safari.
    1. It fills it out with zeroes and dashes
    2. Often the box cannot be filled in manually as it reverts to the zeroes and dashes.
    Any idea how to fix this? Thanks!

    Yes, the Canadian Postal Code ought to be displayed correctly if the site provider has made provision for it. Auto-fill retains past site information. Go to your Safari Preferences>Autofill and select the "edit" box next to "Other Forms". There you can remove the entire file, or do it selectively by highlighting on the specific sites. Quit Safari.
    Then go back to your Address Book and enter your postal code again. Restart Safari and try some of the Canadian postal code compliant sites.
    As far as the non-Canadian postal, don't know what to say. It either works or not. Perhaps, removing the old information and starting over might make a difference.

  • Canadian postal code help

    hey
    i want a canadian postal code that have 0 tax
    i don't want to be taxed
    thanks

    Apple isn't here. Apple doesn't answer questions here. The only postal code that you may use is the postal code for your legal residence or the billing address of the credit card that you use if different from your address.

  • Canadian Postal Codes in Numbers

    Hi,
    I am trying to format a column on a spreadsheet so that all of the postal codes are in the same format.
    I think I would do something like:
    =PROPER((LEFT(A1,3),MID( ),PROPER(RIGHT(A1,3))
    but i keep getting a syntax error.
    I would like the postal codes to read A1A 1A1
    Any thoughts on what I can do to fix it?
    Thanks in advance!!
    MH

    Wayne Contello wrote:
    What is missing from this solution?
    This, perhaps:
    =UPPER(left(A1,3)&" "&right(A1,3))
    HYllom's use of PROPER in the question implies some entries may not include the required capitalization. With Canadian postal codes, where a letter always either leads the string or follows a numeral, either PROPER or UPPER will ensure that all letters display as capitals. With other systems (eg. Britain) where many post codes contain two consecutive letters, PROPER will convert only the first (or the first following each numeral) to capitals, while UPPER will convert all letters.
    Note that in either case, the conversion is 'display only,' the underlying text remains unchanged.
    Regards,
    Barry

  • New Canadian Postal Code

    There is a new postal code in Canada that is not yet showing up on Bing Maps.  Can the new postal code for LEVIS, QC G6W 0M4 be added to Bing Maps geo-location
    information, please?  Thank you.

    I have verified that this is a new postal code and have sent this to our data providers to have it added to Bing Maps.
    http://rbrundritt.wordpress.com

  • Canadian postal code not taking in web forms

    Seems like Safari changes a postal code entry like N1C to 1-1 and will not allow me to edit the 1-1. Any ideas?

    Hi Mark
    I see the problem. The zip field is designed to accept only 5 characters. Tried it on Firefox too with the same result.
    I believe Canada codes are at least 6 characters. Did Safari return an error when you sent the "contact us" info, while Firefox did not? If so, Firefox would have accepted the alpha characters, Safari not.
    If that's the case, coding errors exist on the site which Safari would not accommodate, but Firefox probably would - it's much more forgiving with this type of poor coding.
    Anyhow, good lesson in using another browser when rendering difficulties happen with Safari.
    Thanks for the and Aloha from Big Island.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer, Airport Express (2 units)

  • How do I validate a postal code format?

    I am trying to use actionscript check a string to see if it
    is in a valid Canadian postal code <b>format</b> (ie.
    M5R1X2).
    The format is 6 characters and is always
    Letter,Number,Letter,Number,Letter,Number.
    Can anyone help me check each character in a string to see it
    they are numbers or letters?
    Any help would be appreciated.
    Thanks,
    Tim

    checkPCode = function () {
    var st:String = arguments[0];
    if (arguments[0].length == 6) {
    for (var i = 0; i<arguments[0].length; i++) {
    t = st.charAt(i);
    switchCheck = (i%2 != 0) ? "Even" : "Odd";
    if ("Odd" == switchCheck) {
    detect = isNaN(t);
    } else {
    detect = (isNaN(t) == false);
    if (!detect) {
    break;
    return detect;
    } else {
    return false;
    trace(checkPCode("A3M5T3T"));//correct format and incorrect
    length
    trace(checkPCode("A3M5T3"));//correct format and correct
    length
    trace(checkPCode("A335T3"));//incorrect format and correct
    length

  • Postal Code Verrification Format

    Just wondering if anyone knows how to write a script to bring back anything that is NOT in the following format
    #A# A#A
    (# = any number 0-9)
    (A = an letter in the alphabet)

    Hi,
    In Oracle 10 (and up):
    WHERE     NOT REGEXP_LIKE ( txt
                       , '^([[:digit:]][[:alpha:]]){3}$'
                   )In any version of Oracle:
    WHERE     TRANSLATE ( UPPER (txt)
                , '012345678BCDEDGHIJKLMNOPQRSTUVWXYZ'
                , '999999999AAAAAAAAAAAAAAAAAAAAAAAAA'
                ) = '9A9A9A'Just curious; where is this system used? Canada has just the reverse, letter first. (E.g., Santa Claus's Canadian postal code is 'H0H0H0'.)
    Edited by: Frank Kulash on May 3, 2010 2:12 PM

  • Oracle Inferface Invoices Rejects Canadian Tax Code

    Hi to All,
    Today we incountered Oracle Interface Invoice issue where a invoice with Canadian Tax Code "HST" was rejected. Researching the Open Interface Invoice Lines we can see for the invoice the tax code "HST".
    But when we go to quick invoices and view the rejected invoice the TAX Code "HST" is NULL. When attempting to update the invoice we get the following error: FRM-40212: Invalid value for field TAX_NAME.
    We have checked the tax code in Oracle and tax code is enabled.
    We have also checked the Acct Distrubtion and accounts are enabled.
    We have been processing several invoices for CAD with tax code "HST" and we have not been having any issue.
    Would like assistance on where the issues lies and how to resolve.
    Thanks

    hi,
    1. Check if the GL date entered in the invoice header is in open period and status set to null before running payable open interface.
    2. Check if "GL period" is open for that period in GL responsibility.
    I also faced the same issue:
    Re: Payable interface error: ACCT DATE NOT IN OPEN PD
    Regards
    Imran

  • Why when I change my debit card banking details and the postal code of where I stay is rejected,yet I know it is the correct postal code?please HELP me.

    Why is it that when I'm changing my debit card details and my postal address I receive a message that says my postal code is not valid?and yet I'm certain of what my postal code is.Please help.Regards,

    Ztshosane wrote:
    ... I receive a message that says my postal code is not valid?...
    Try here  >  http://support.apple.com/kb/TS1646
    If necessary... Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • Withholding tax line items are not post

    Hi, I was configured all the steps for extended withholding tax up to Assign withholding tax to vendor master data and the i am used to post an vendor invoice given all required feild and press enrer and display the withhoding tax codes screen here a

  • How can I put up a free version of a book in countries I can't sell to, using iBooks Author

    I have released a paid version of a book on Flags and Anthems of the World to the 51 countries I can sell it to, but how would I be able to up the same book for free to the rest of the countries that I can't sell to, because I don't want them to be l

  • New iTunes upgrade

    I'm using a PC with Windows Vista.I was forced to upgrade to iTunes 10.?After doing that,I now get an error (-3212) which says my iTunes store can't connect because I'm not connected to the internet.Since I'm writing this message,that's clearly not t

  • Add value field to operating concern

    Hello, I have created a new value field VV955 and want to add it to my operating concern in transaction KEA6. I go into change mode for all value fields for my operating concern and add a new line with my value field. When I hit the save button, it s

  • Problem with session attibute

    Hi, I have a jsp page that must call a servlet after control the value of a session attibute. In jsp page I use this code: <c:if test='${user==null}'>      <jsp:forward page="controller" /> </c:if> and my application call the servlet "controller" tha