Cancel Application that is in an infinite loop

Hi,
I have an infinite loop in my application, I close the browser, but the application is still running in background. A new deploy hangs.
How can I cancel the application without rebooting the J2EE-engine?
Regards
Roman

Hi,
I didn't try it. Maybe you can stop the application in the Visual admin under Server -> Services -> deploy.
This is just a guess. But maybe it works.
Regards,
Dennis

Similar Messages

My ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

How to cancel a bpm running into an infinite loop

Hi all,
I have a business process in my file to file scenario and I am using a while loop to
process the messages and it is going into infinite loop.
Now I have corrected the problem and when I reprocess it ,it is using the same original condition for it again the infinite loop.
So what I understood is I need to cancel out the previous business process which is running into infinite loop .so can you please help me out how do I stop the message processing (and it is not error status also).i,e the business process before I start the fresh test case.
Thanks in advance,
Vengal.

Hi Vengal,
You can put a condition inside the loop, and whenever that condition will met, it will exit from the loop.
First of all declare one integer (Int_temp) under container operation.
Inside the container operation properties, give the variable name and other info as shown below:
<u><b>Container Operation</b></u>
Target -
> Int_temp
Operation -
> Assign
Expression------> Int_temp
Operator -
> +
Experssion -
> '1'
Now inside loop properties you can write the condition as shown below:
Condition -
> <b>(Int_temp ≠ 2)</b> (this is just an example)
The efect of this condition will be on loop till <b>Int_temp</b> is not equal to 2, as soon as it will become 2, it will exit from the loop.
above is one simple example, there can be several methods.
I hope it will help you.
Regards,
Sarvesh
****Reward Points, if found helpfull.

How to obtain data from a device and display that data in an infinite loop

I'm trying to run an infinite loop where I'm testing a robot for thermal insulation.
I send the robot a command to run infinitely (using VISA communication)..., the robot starts running.
At the same time I obtain the temperature data from its motors (through sensors) and want to display it. The data should be refreshed at regular itervals but I only get broken display of the data at various instances of time during the robot's test-run.
I fear that there is a problem with the time synchronization. But having tried many permutations of time delays at various points in the program, I can not find the fault.
Any help is much appreciated.
Cheers
Rajat

We really need screen shots (*png format/NOT .bmp!) or attached code to see what might be the problem. There are an infinite number of mistakes that can be made (or nearly so), depending on how a program is written.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Can a CIN that is in an infinite loop send data to labview without exiting?

I have a C program that continuously queries a motor controller. Right now that program is in a labview vi as a CIN. The problem is that the CIN must exit before reporting the controller response to the labview vi. This means I have to constantly run the CIN which opens, queries and closes the connection each time. Is it possible to run the loop in the CIN itself so that the response buffer from the controller can be sent to the labview vi without exiting. Are there variables types that can be passed from the CIN before completing the CIN?

The controller is a Galil DMC4080 motor controller. I am running Labview under Mandrake Linux. I can connect and send commands to the controller using a C program. I modified the C program as a CIN to pass the controller response to the Labview front panel. Galil has a library of functions used for the controller commands. LStrPrintf is the command I use to write the data to labview. Currently I just run this CIN without a while loop and loop it in labview but I recieve an error message after a 1000 executions, see: http://forums.ni.com/ni/board/message?board.id=170&message.id=270220
If interested here is the current code I am using with the infinite loop.
#include "extcode.h"
#include "dmclnx.h"
#include "hosttype.h"
MgErr CINProperties(int32 prop, void *data);
MgErr CINRun(LStrHandle IPAddress, LStrHandle Command, LStrHandle Response,
        float64 *ErrorCode);
MgErr CINProperties(int32 prop, void *data)
    switch (prop) {
        case kCINIsReentrant:
            *(Bool32 *)data = TRUE;
            return noErr;
    return mgNotSupported;
MgErr CINRun(LStrHandle IPAddress, LStrHandle Command, LStrHandle Response,
        float64 *ErrorCode)
   float          rc = 0;          /* Return code */
   char           buffer[32] = ""; /* Response from controller */
   char           ip[20]=""; /* IP address of controller*/
   char           cmd[20]=""; /* Command to send to controller*/
   HANDLEDMC      hdmc = -1;       /* Handle to controller */
   CONTROLLERINFO controllerinfo; /* Controller information structure */
   memset(&controllerinfo, '\0', sizeof(controllerinfo));
   controllerinfo.cbSize = sizeof(controllerinfo);
   controllerinfo.usModelID = MODEL_2100;
   controllerinfo.fControllerType = ControllerTypeEthernet;
   controllerinfo.ulTimeout = 1000;
   controllerinfo.ulDelay = 5;
   SPrintf(ip,"%H",IPAddress);
   strcpy(controllerinfo.hardwareinfo.socketinfo.szIPAddress, ip);
   controllerinfo.hardwareinfo.socketinfo.fProtocol = EthernetProtocolTCP;
   DMCInitLibrary();
   /* Open the connection */
   rc = DMCOpen(&controllerinfo, &hdmc);
   if (rc)
       *ErrorCode = rc;
       return noErr;
      while (1)
          SPrintf(cmd,"%H",Command);
          rc = DMCCommand(hdmc, cmd, buffer, sizeof(buffer));
          if (rc)
              *ErrorCode = rc;
              return noErr;
              break;
          else
              LStrPrintf(Response,buffer);
   rc = DMCClose(hdmc);
   if (rc)
      *ErrorCode = rc;
      return noErr;
   *ErrorCode = rc;
   return noErr;

Program enters infinite loop.

this is the first program i'm writing with sockets and is also a step towards making a chat application. my problem is that the program enters infinite loop.
package server;
import java.net.*;
import java.io.*;
class Server
    public static void main(String[] args) throws Exception
        ServerSocket ss = new ServerSocket(9090);
        Socket soc = ss.accept();
        BufferedReader in = new BufferedReader(new InputStreamReader(soc.getInputStream()));
        String str = in.readLine();
        while(str!="")
            System.out.println(str);
            str = in.readLine();
        soc.close();
        ss.close();
}this was the server - a seperate application. below is a part of the client - a seperate application
    private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
        try
            InetAddress ip = InetAddress.getByName("127.0.0.1");
            Socket soc = new Socket(ip,9090);
            PrintWriter out = new PrintWriter(new BufferedWriter(new OutputStreamWriter(soc.getOutputStream())),true);
            str_out = jTextArea2.getText();
            while(str_out!="")
                out.println(str_out);
                str_out = jTextArea2.getText();
            soc.close();
        catch(Exception e)
            System.out.println("Error sending message");
    private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
        str_out = "";
        jTextArea2.setText(str_out);
    } when i press button send (jButton1) the text from the text area jTextArea2 is supposed to go to the server and then the server should display it in its out put screen. i tried sending hello and the server went on printing hello continously.
pleas help.

String str = in.readLine();
while(str!="")
System.out.println(str);
str = in.readLine();
}You need to test for (str != null) above too, or instead of str != "".

How to create an infinite loop that cannot be cancelled?

Hi , im new around java and i need a program that keeps on repeating after each each input/uses(generally meant for different user) and cannot either stop using "Cancel" or "x" while stopping only using the "stop" button
I got a few lines of codes that look like this : String arg = "";
do{
JOptionPane.showInputDialog("hi");
}while ( arg != "y" || arg!= "Y");
and it cannot be stop with both cancel and"x"(which i wanted)
but when i used this logic with
Valid validUserInput = new Valid();
do {
userInput = validUserInput.validUserInput(a);
switch(userInput){
case 1 : validUserInput.optionOne(b);break;
case 2 : validUserInput.optionTwo(c);break;
case 3 : validUserInput.optionThree(d,e);break;
default : validUserInput.validUserInput(f);
}while(looping != "" || looping != " ");
it does not really work(while it will keep looping, it can be easily stop by pressing cancelled or "x")
So is there any logic or method that can prevent the program from being stop?
Thankyou!

elricscript wrote:
"That is helpful. It gives him a direction where he can focus his research. Namely, 'how to run a program in kiosk mode' rather than 'how to create an infinite loop that cannot be cancelled.'"
No... He already mentioned he wants to "e.g Interactive kiosk", so saying "properly kiosk it" isn't adding any new information. Rather it's just giving the person a dead point of: you're doing it wrong. Pointing out someone is wrong is not a positive enlightenment. Pointing someone in the right direction is more productive.
>"That is helpful. It gives him a direction where he can focus his research. Namely, 'how to run a program in kiosk mode' rather than 'how to create an infinite loop that cannot be cancelled.'"
No... He already mentioned he wants to "e.g Interactive kiosk", so saying "properly kiosk it" isn't adding any new information.
Yes it is. He asked how to do it using some Swing trickery, and I said it won't work. Which is true. The OP didn't already know that, clearly, hence the question. Now he does. That's pretty much new information if you ask me.
Rather it's just giving the person a dead point of: you're doing it wrong.Right. He is. However, the problem is now no longer related to Java, and not something I can help him with. You should try that: not answering questions you don't know the answer to. It's actually more helpful than posting misleading, wrong answers.
Pointing out someone is wrong is not a positive enlightenment. I'm giving basic technical help, not yoga lessons.
Pointing someone in the right direction is more productive.As already stated, I am as ignorant of how to make a Java application into a kiosk app as the OP is. What value can I add in light of that information? I began by answering a question that was not stated to be about kiosks. Once the question moved outside of my area of knowledge, I stopped trying to answer.
I notice you're not giving him any help, being more interested in admonishing others as you are.

Infinite loop/afrLoop when deploying ADF application to standalone weblogic

Working with Oracle ADF / JDeveloper 11.1.2.2
I have enabled ADF security in my application and am using JAAS combined with Oracle EBS users and roles to provide security to the application. Testing on my local integrated weblogic server works fine.
When deploying my Oracle ADF application to a standalone Weblogic server through an EAR file, requesting a JSF page causes the server to go into an infinite loop on both IE and firefox.
GET /test-app/faces/login.jsf HTTP/1.1     200
GET /test-app/faces/login.jsf?_afrLoop=346001033248597&_afrWindowMode=0&Adf-Window-Id=w0 HTTP/1.1     302
GET /test-app/adfAuthentication HTTP/1.1     302
GET /test-app/faces/login.jsf HTTP/1.1     200
GET /test-app/faces/login.jsf?_afrLoop=346001340281597&_afrWindowMode=0&Adf-Window-Id=w0 HTTP/1.1     302
GET /test-app/adfAuthentication HTTP/1.1     302
GET /test-app/faces/login.jsf;jsessionid=syWvP1nMY1L87BySh2JbTd1tb4SY0HzDw6T3LvLctvkbMWKmqqJv!1800986117 HTTP/1.1     200
GET /test-app/adfAuthentication HTTP/1.1
Reviewing some of the suggestions from the forum and from the link below, I have tried fixing the issue through updates to my web.xml - but am still having the same issue.
https://blogs.oracle.com/jdevotnharvest/entry/solving_jdeveloper_11gr2_issue_with
Updated web.xml:
<security-constraint>
<web-resource-collection>
<web-resource-name>Allowed ADF Resources</web-resource-name>
<url-pattern>/adf/*</url-pattern>
<url-pattern>/afr/*</url-pattern>
<url-pattern>/bi/*</url-pattern>
<url-pattern>/servlet/GraphServlet/*</url-pattern>
<url-pattern>/servlet/GaugeServlet/*</url-pattern>
<url-pattern>/mapproxy/*</url-pattern>
<url-pattern>/adflib/</url-pattern>
</web-resource-collection>
<web-resource-collection>
<web-resource-name>allPages</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<web-resource-collection>
<web-resource-name>adfAuthentication</web-resource-name>
<url-pattern>/adfAuthentication</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>valid-users</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/faces/login.jsf</form-login-page>
<form-error-page>/faces/login-error.jsf</form-error-page>
</form-login-config>
</login-config>
<security-role>
<role-name>valid-users</role-name>
</security-role>
weblogic.xml
<security-role-assignment>
<role-name>valid-users</role-name>
<principal-name>users</principal-name>
</security-role-assignment>
I know other users have experienced similar issues - but I am having trouble debugging or troubleshooting why this is happening.
Any suggestions on how to further troubleshoot or resolve this issue would be appreciated!
Dan

I was able to resolve the login page looping issue.
The issue is related to the login page being a JSF page based on a page template.
When I created the JSF login page as a page template - the template contains a binding:
<af:pageTemplate viewId="/test-template.jsf" value="#{bindings.ptb1}" id="pt1">
When I deploy my application to the test weblogic server, the anonymous-role grants are not being respected. So even though I grant view access to the login JSF page to anonymous-role -- it appears that weblogic is trying to request a login for any page with a pageDef (including the login page). By re-creating the login page with no pageDef (a JSF page that does not use a page template) -- the login page is displayed (rather than entering into a loop).
There is still a seperate issue with the anonymous-role grant not working as I would expect it to work that I will need to troubleshoot further.

How do I cancel a sub vi stuck in an infinite loop?

Hi,
I am attempting an implementation of the Constrained Nonlinear Optimization sub vi. It works perfectly 99.9% of the time but gets stuck the other .1% of the time. It is supposed to time out when it cannot find a solution, but it is failing to do so. Consequently my VI regularly crashes.
Apparently this is a known issue with this subvi. The NI whitepaper mentions that this is caused by a subvi while loop that can get stuck in an infinite loop. The work around is suggested to be to add a counter to the loop and exit it after a certain number of iterations.
I can find the infinite loop occuring in the subvi. But the sub vi opens as a clone and will not let me edit it. How do I work around that?
Failing that, is there a way from the main vi to cancel the optimization vi after a certain time so that the program can move on?
Suggestions would be appreciated.

Abort the program. Press ctrl+M when you have VI opened as clone. This will open it in edit mode.

How do I create an input box with a cancel button that will end a loop in my script?

I have been working on a script for my client and I am having trouble getting it to work properly. I stole most of the code from the PowerShell Tip of the Week "Creating a Custom Input Box". I also took someone's code for the Show-MessageBox function.
I have slightly modified the original code with two parameters and an additional text box. The first field is for an e-mail address and the second is for an employee number.
I need to know how I can get a Do Until loop to recognize when the cancel button is pushed and break the loop and effectively end the script. The work happens at the end but perhaps I need something added/modified in the InputBox function.
I want the script to check to see if anything has been entered in the second text box. If empty it displays a message and calls the InputBox function again. Then if there is something I use elseif to check to see if it matches my RegEx (digits only). If
it doesn't match it will loop and call the InputBox function again.
This all works fine. The problem I am having is that I cannot cancel out of the form. I'd like the loop to continue until the second box matches my RegEx or Cancel is clicked. Clicking cancel doesn't break the loop. I need to know how I can stop the loop
when cancel is pressed. I've seen Stack "Overflow: PowerShell Cancel Button Stop Script" but I don't think this will work in a loop.
Any help would be awesome. As a note, I DO NOT want to use the VB Interaction stuff.
function InputBox {
param ($Name,$EN)
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Text = "Data Entry Form"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$x=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click({$objForm.Close()})
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Employee Email Address:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
if ($Name) {
$objTextBox.Text = $Name
else {
$objTextBox.Text = "@domain.com"
$objLabel2 = New-Object System.Windows.Forms.Label
$objLabel2.Location = New-Object System.Drawing.Size(10,70)
$objLabel2.Size = New-Object System.Drawing.Size(280,20)
$objLabel2.Text = "Employee Number:"
$objForm.Controls.Add($objLabel2)
$objTextBox2 = New-Object System.Windows.Forms.TextBox
$objTextBox2.Location = New-Object System.Drawing.Size(10,90)
$objTextBox2.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Controls.Add($objTextBox2)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate()})
[void] $objForm.ShowDialog()
$Script:ButtonName = $objTextBox.Text
$script:ButtonEN =$objTextBox2.Text
$ButtonName; $ButtonEN
Function Show-MessageBox{
Param(
[Parameter(Mandatory=$True)][Alias('M')][String]$Msg,
[Parameter(Mandatory=$False)][Alias('T')][String]$Title = "",
[Parameter(Mandatory=$False)][Alias('OC')][Switch]$OkCancel,
[Parameter(Mandatory=$False)][Alias('OCI')][Switch]$AbortRetryIgnore,
[Parameter(Mandatory=$False)][Alias('YNC')][Switch]$YesNoCancel,
[Parameter(Mandatory=$False)][Alias('YN')][Switch]$YesNo,
[Parameter(Mandatory=$False)][Alias('RC')][Switch]$RetryCancel,
[Parameter(Mandatory=$False)][Alias('C')][Switch]$Critical,
[Parameter(Mandatory=$False)][Alias('Q')][Switch]$Question,
[Parameter(Mandatory=$False)][Alias('W')][Switch]$Warning,
[Parameter(Mandatory=$False)][Alias('I')][Switch]$Informational)
#Set Message Box Style
IF($OkCancel){$Type = 1}
Elseif($AbortRetryIgnore){$Type = 2}
Elseif($YesNoCancel){$Type = 3}
Elseif($YesNo){$Type = 4}
Elseif($RetryCancel){$Type = 5}
Else{$Type = 0}
#Set Message box Icon
If($Critical){$Icon = 16}
ElseIf($Question){$Icon = 32}
Elseif($Warning){$Icon = 48}
Elseif($Informational){$Icon = 64}
Else{$Icon = 0}
#Loads the WinForm Assembly, Out-Null hides the message while loading.
[System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") | Out-Null
#Display the message with input
$Answer = [System.Windows.Forms.MessageBox]::Show($MSG , $TITLE, $Type, $Icon)
#Return Answer
Return $Answer
$num = "^\d+$"
do {
if (!($ButtonEN)) {
Show-MessageBox -Msg "You must enter a numeric value for the employee number." -Title "Employee Number Missing" -Critical
InputBox -Name $ButtonName
elseif ($ButtonEN -notmatch $num) {
Show-MessageBox -Msg "The employee number must contain numbers only!" -Title "Non-numerical characters found" -Critical
InputBox -Name $ButtonName
until ( ($ButtonEN -match $num) -or (<this is where I want to be able to use the cancel button>)

Here is a simple validation method.
function New-InputBox{
param(
$EmailAddress='',
$EmployeeNumber=''
Add-Type -AssemblyName System.Windows.Forms
$Form=New-Object System.Windows.Forms.Form
$Form.Text='Data Entry Form'
$Form.Size='300,200'
$Form.StartPosition='CenterScreen'
$OKButton=New-Object System.Windows.Forms.Button
$OKButton.Location='75,120'
$OKButton.Size='75,23'
$OKButton.Text='OK'
$OKButton.DialogResult='Ok'
$OKButton.CausesValidation=$true
$Form.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text ='Cancel'
$CancelButton.DialogResult='Cancel'
$CancelButton.CausesValidation=$false
$Form.Controls.Add($CancelButton)
$Label1=New-Object System.Windows.Forms.Label
$Label1.Location='10,20'
$Label1.Size='280,20'
$Label1.Text='Employee Email Address:'
$Form.Controls.Add($Label1)
$TextBox1=New-Object System.Windows.Forms.TextBox
$TextBox1.Location='10,40'
$TextBox1.Size='260,20'
$textbox1.Name='EmailAddress'
$textbox1.Text=$EmailAddress
$Form.Controls.Add($textbox1)
$Label2=New-Object System.Windows.Forms.Label
$Label2.Location='10,70'
$Label2.Size='280,20'
$Label2.Text='Employee Number:'
$Form.Controls.Add($Label2)
$TextBox2=New-Object System.Windows.Forms.TextBox
$TextBox2.Location='10,90'
$TextBox2.Size='260,20'
$TextBox2.Name='EmployeeNumber'
$TextBox2.Text=$EmployeeNumber
$Form.Controls.Add($TextBox2)
$Form.AcceptButton=$OKButton
$Form.CancelButton=$CancelButton
$Form.Topmost = $True
$form1_FormClosing=[System.Windows.Forms.FormClosingEventHandler]{
if($Form.DialogResult -eq 'OK'){
if($textbox1.Text -eq ''){
[void][System.Windows.Forms.MessageBox]::Show('please enter an email address','Validation Error')
$_.Cancel=$true
}else{
# Check empno is all digits
if("$($TextBox2.Text)" -notmatch '^\d+$'){
[void][System.Windows.Forms.MessageBox]::Show('please enter a number "999999"','Validation Error')
$_.Cancel=$true
$form.add_FormClosing($form1_FormClosing)
$Form.Add_Shown({$Form.Activate()})
if($Form.ShowDialog() -eq 'Ok'){
# return the form contents
$Form
if($f=New-InputBox -EmailAddress [email protected]){
'Email is:{0} for Employee:{1}' -f $f.Controls['EmailAddress'].Text,$f.Controls['EmployeeNumber'].Text
}else{
Write-Host 'From cancelled!' -ForegroundColor red
¯\_(ツ)_/¯

My Macbook Pro will not boot up. I can hear the sound that it has started and then goes into an infinite loop.

My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.

What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
Clinton

Cancelling an application that is in the process of downloading

I have been downloading many applications, and there are a few that are so large that require WI-FI to download. I was in a restaurant that had free wi-fi and started to download a couple of those apps. However, I had to leave before they were finished. Now I have two apps that just say "loading." And I dont plan on being in a wi-fi area anytime soon. My question: Is there anyway to cancel an application while in the process of loading?

Ah-ha, I figured it out.
Finish the download in Itunes on your computer by "update downloads". It will finish the download and sync. After it syncs however, those perticular applications that got "stuck" will not appear on your home screens.
But it solves the question, "how to get rid of those applications."

TS1702 HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK

HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK

Please stop SHOUTING at us.
http://support.apple.com/kb/ht4098

[svn:fx-trunk] 10214: This fixes the problem that if two text components share the same textFlow there is an infinite loop involving updateDisplayList - damageHandler - invalidateDisplaylist - back to updateDisplayList.

Revision: 10214
Author:   [email protected]
Date:     2009-09-13 07:33:58 -0700 (Sun, 13 Sep 2009)
Log Message:
This fixes the problem that if two text components share the same textFlow there is an infinite loop involving updateDisplayList -> damageHandler -> invalidateDisplaylist -> back to updateDisplayList. The bug file was for TextArea which is RET but the same bug was in RichText as well.
This example with a renderer exposed it because the typicalItem that is composed to figure out sizes and the actual first item in the list share the same textFlow. It actually has nothing to do with useVirtualDisplay other than it was sharing a textFlow.
It turns out that the TextFlowFactory dispatches damage events every time the textFlow is composed. Unlike when the flowComposer is used, it always considers the flow damaged. It was exacerbated by each of the two components having a damage handler for the same textFlow.
The solution is to use the textFlow generation number. In the damageHandler if the generation is the last known generation number, assume no changes, and return immediately from the damage handler.
QE notes: There are 1 TextArea, 6 TextInput and 2 NumericStepper failuers, with or without my changes. The common link seems to be DispatchKeyEvent. Most were testing maxChar, displayAsPassword and restrict. I tested these and they seem to be working correctly.
Doc notes:
Bugs: SDK-23002
Reviewer: Gordon
Tests run: checkintests, TextArea, TextInput and NumericStepper
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23002
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/RichEditable TextContainerManager.as

Revision: 10214
Author:   [email protected]
Date:     2009-09-13 07:33:58 -0700 (Sun, 13 Sep 2009)
Log Message:
This fixes the problem that if two text components share the same textFlow there is an infinite loop involving updateDisplayList -> damageHandler -> invalidateDisplaylist -> back to updateDisplayList. The bug file was for TextArea which is RET but the same bug was in RichText as well.
This example with a renderer exposed it because the typicalItem that is composed to figure out sizes and the actual first item in the list share the same textFlow. It actually has nothing to do with useVirtualDisplay other than it was sharing a textFlow.
It turns out that the TextFlowFactory dispatches damage events every time the textFlow is composed. Unlike when the flowComposer is used, it always considers the flow damaged. It was exacerbated by each of the two components having a damage handler for the same textFlow.
The solution is to use the textFlow generation number. In the damageHandler if the generation is the last known generation number, assume no changes, and return immediately from the damage handler.
QE notes: There are 1 TextArea, 6 TextInput and 2 NumericStepper failuers, with or without my changes. The common link seems to be DispatchKeyEvent. Most were testing maxChar, displayAsPassword and restrict. I tested these and they seem to be working correctly.
Doc notes:
Bugs: SDK-23002
Reviewer: Gordon
Tests run: checkintests, TextArea, TextInput and NumericStepper
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23002
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/RichEditable TextContainerManager.as

Memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

What are you doing with your program. Lots of improper programming techniques can cause this - building arrays, concantanating strings, opening but not closing refrences, etc. Need more details or post your VI. Also, have you looked at "LabVIEW Performance and Memory Management"? It's part of the shipping documentation and available from Help>Search the LabVIEW Bookshelf.

Cancel Application that is in an infinite loop

Similar Messages

Maybe you are looking for