Cannot able to pick during sto
Hi Friends,
I am doing inter company sto (cross - company code). After picking, when i do PGI it is showing this error
" account 892000 requires an assignment to a CO object "
System Response:
Account 892000 is defined as cost element. This means that you must always specify a CO assignment.
Enter order or project or wbs element or cost center.
How should i solve this. Kindly help me to solve this.
Regards,
Prasath
Hi,
You can search for the error message on the forum:
Account XXXXX requires an assignment to a CO object
ERROR: Account 410000 requires an assignment to a CO object in MM flow
Regards,
Csaba
Similar Messages
-
EXIT to change / add line items during STO PO creation in T.Code ME21N
Hi
Can somebody suggest me a EXIT or a BADI to change / add line items during STO PO creation in T.Code ME21N.
The requirement is as below.
When the user enters a material no ( which has a BOM created in CS01), and presses enter or saves the PO, i need to get the sub components of the BOM and populate them as the next line items.
This is because the user needs to create the delivery with reference to the PO. In the delivery, the BOM material needs to be populated with all the sub components of the BOM.
I tried to do it using EXIT_SAPMM06E_013 in which i am able to change / add the line items in the XEKPO and YEKPO internal tables. The entries are available in the internal table when the EXIT is executed.
But when the PO is posted internally, the item is not changed/added.
Thanks in advance.
Guna.Hi,
Try BADI "ME_PROCESS_PO_CUST".
cheers, -
Z-Program not able to pick up Payment Run date & Identification.
Hi,
I created a Z-Program for Payment file creation.
This Z-program able to pick up Payment Run Date & Identification if I run it alone ( back ground and fore ground).
My issue is, if I run it from F110 with variant, it is not able to pick up the Payment Run date & Identification.
I used following code to get the Payment Run date. (SAP Version 4.6C)
*------- SPA/GPA-Parameter
DATA: BEGIN OF gpa,
laufd LIKE f110v-laufd,
laufi LIKE f110v-laufi,
END OF gpa.
IF p_laufd IS INITIAL OR p_laufi IS INITIAL.
Get the parameter values for Run Date & Identification from F100, if
User not passed the above parameters while running this program
GET PARAMETER ID '110' FIELD gpa.
MOVE : gpa-laufd TO p_laufd.
MOVE : gpa-laufi TO p_laufi.
ENDIF.
Your help appreciated.
Thanks,
ReddyHello,
What exactly is your requirement?
IF p_laufd IS INITIAL OR p_laufi IS INITIAL.
* Get the parameter values for Run Date & Identification from F100, if
* User not passed the above parameters while running this program
GET PARAMETER ID '110' FIELD gpa.
MOVE : gpa-laufd TO p_laufd.
MOVE : gpa-laufi TO p_laufi.
ENDIF.
Your code will execute if the user doesnot pass Run Date & Run ID. But you CANNOT execute F110 without passing Run Date & Run ID.
Hope this helps.
BR,
Suhas -
Packing instructins not picked during Handling Units
Hi all
I had created the packing instructions with the packaging material and the material to be packed .
when i tried to create the HUM's with reference to the packaging instructions the material to be packed is not getting picked .
can some explain what could be the possible reasons .
I simulation tab of the packing instructions the status of the packaging material is " ? "
thanks ,
ksrHi Vishal ,
thanks for the reply .
the steps i followed are
1) created packaging instructions using POP1 for a material .
2) Maintained POF1 - Create Packing Instruction Determination Record during this i checked and able to see the packaging instructions assigned to it too for STOC .
3) Non-Assigned Packing profile with STOC condition type exists .
still i am not able to pick the automatic packing instructions while using HU02 .
please correct me if i am wrong somewhere .
thanks ,
ksr -
PI is not able to pick the file from the FTP folder
This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestionHi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path. -
iCloud changes my calendar colors. I am no longer able to pick my own calendar colors. This is due to some bug on iCloud. FIX THIS PROBLEM IMMEDIATELY APPLE!!! THIS IS RIDICULOUS. iCloud should not force us to pick calendar colors. We should be able to pick our own!!!!!
Same here, Calender keeps reverting to Purple a color I never ever even picked, screw you iCloud, you continue to annoy me and baffle me with your inadequecies
-
Cannot able to view new activities in CONS
Hi,
We successfully deployed new DC into our portal system. Then our dev team did some changes and then created new activity and released in NWDS.
New changes went through default development runtime system.
But I cannot able to view new activities under CONS system, it was showing empty queue. Can any one please help me to fix this issue?
Thanks & Regards
Srinivas
Edited by: Srinivas Dasari on Apr 6, 2008 1:18 PMHi Srinivas,
If you are sure the activity was successfully released from NWDS, try to check in the import history of cons. May be the released activity got imported already.
Akshatha -
Inspection lot creation during STO return
Hello Gurus,
is there a trick to trigger inspection lot creation during STO return ?
Scenario is the following:
1 - Creation of STO
2 - Supplying plant ships materials... stock in transit
3 - Receiving plant receives materials
4 - Materials with defects -> Receiving plant add new line with return tick on the same material
5 - GI from Receiving plant... stock in transit
6 - Supplying plant receives materials -> Inspection lot has to be created
I used inspection type 08 on Receiving plant w/o success.
Many thanks.
StéphaneNo inspection lot is created when we return Materials to Vendor (Plant A) even if we maintain Inspection type 02.
Before STO customizing, Plant B creates a subcontracting purchase order. Next Materials are sending to Vendor (Plant A) and put in "Stock provided to vendor" (Transaction ME2O).
Vendor (Plant B) creates a Repair request (Sales document / Transaction VA01). Next run VRRE to reveice Materials to repair. Inspection lot is automatically created. The usage decision triggers the creation of Service order to manage all the repairing flow. Last step is to deliver Materials to Plant A and create Repair invoice.
Repair request supports all repairing flow (inspection lot, service oder...), especialy status (out of warranty or not).
After STO customizing, I expected the following result:
1° - Return STO to Vendor (Plant A) / ME21N with return tick
2° - Plant B ships Materials / MIGO wih 101 (SAP converts in 161)
3° - Stock in Transit
4° - Materials receive to Vendor (Plant B) / VL10B
5° - Creation Inspection lot
6° - UD triggered Service order creation
7° - ...Repairing flow with Service order...
8° - Materials ship to Plant B
9° - Repair invoice
10° - Stock in Transit
11° - Plant B receives Materials
As I said, there are 2 blocking points:
- Inspection lot not created when Vendor receives Materials
- Service order not created automatically (because no Repair request to support inspection lot, service order...)
Thanks a lot for your help.
Tell me if you have any questions.
Stéphane -
i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX
Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now? -
hi , i've ipad 4G . i live in dubai (UAE) , i make apple id but cannot able to download any apps so plz suggest me. How to register apple ID without cradit card on Itune in UAE region ?
Step 1 to 8 with pictures attached:
1. Select any free app
http://i1224.photobucket.com/albums/ee374/Diavonex/5622c304.jpg
2. Tap install App
http://i1224.photobucket.com/albums/ee374/Diavonex/9c71cbba.jpg
3. Just tap Create New Apple ID
http://i1224.photobucket.com/albums/ee374/Diavonex/3564262e.jpg
4. Confirm your country; fill in your country's name
http://i1224.photobucket.com/albums/ee374/Diavonex/15af6726.jpg
5. Agree with Term and Condition
http://i1224.photobucket.com/albums/ee374/Diavonex/a50cb07a.jpg
6. Fill in your Apple ID and Password
http://i1224.photobucket.com/albums/ee374/Diavonex/f942f7f5.jpg
7. Create and answer secret question
http://i1224.photobucket.com/albums/ee374/Diavonex/774b1991.jpg
8. Select NONE for billing information
http://i1224.photobucket.com/albums/ee374/Diavonex/6f6e54ff.jpg
Other pictures
http://i1224.photobucket.com/albums/ee374/Diavonex/553a2651.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/52783119.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/a5fcfc6b.jpg -
Weblogic Classpath setting error not able to pick the properties file
Hi All,
We are using a third party jar and create a java Web service on the top of that jar. This jar file need two configuration file .properties and .xml when we deploy war for the application into weblogic server it will give file not found error. Though this file already exists inside the .war but from the application it is not able to pick the files.
We find that these file need to be put in weblogic domain home and we put it there and application works.
I decompile the jar and found that inside java class they use FileReader("allXXX.xml") path and when I Google it and found that it will pick the file from weblogic domain directory.
The issue is that we need to put properties file in specific weblogic folder like /3party/config by setting the class path inside startWebLogic.cmd. Please let us know solution for same
Thanks in advance
Edited by: sb**** on Mar 19, 2012 9:08 AMHi , I am also facing the similer issue. I am deploying war file of my Spring MVC application , but its not picking resource bundle .properties files from one of the configuration file.
<bean id="PropertiesRepository"
class="LanguageBasedPropertiesRepository">
<property name="propertiesFiles">
<map>
<entry key="en" value="classpath:/exceptionMessages.properties" />
<entry key="es" value="classpath:/exceptionMessages_es.properties" />
<entry key="default" value="classpath:/exceptionMessages.properties" />
</map>
</property>
</bean>
Please let me know how we can modify this to make it work.
thanks . -
File not able to pick while using FCC at sender channel
Hi Experts ,
we design one scenario that we need to process flat file to ECC. So we have used FCC at sender channel.
while we testing , only its showing as successfull logs in channel , but we not able to pick the file.
could you please check the below details and let me know it i missed any thing.
PFB file which need to pick.
PFA scrren shot of FCC
26.Jun 2014 #123
Country|Currency|Amount|Code|Rate
Australia|dollar|1|AUD|18.989
Brazil|real|1|BRL|9.119
Bulgaria|lev|1|BGN|14.037
Canada|dollar|1|CAD|18.836
China|renminbi|1|CNY|3.242
Croatia|kuna|1|HRK|3.623
Denmark|krone|1|DKK|3.682
EMU|euro|1|EUR|27.455
Hongkong|dollar|1|HKD|2.603
Hungary|forint|100|HUF|8.916
IMF|SDR|1|XDR|31.154
India|rupee|100|INR|33.540
Indonesia|rupiah|1000|IDR|1.668
Israel|shekel|1|ILS|5.883
Japan|yen|100|JPY|19.824
Lithuania|litas|1|LTL|7.952
Malaysia|ringgit|1|MYR|6.272
Mexico|peso|1|MXN|1.550
New Zealand|dollar|1|NZD|17.678
Norway|krone|1|NOK|3.286
Philippines|peso|100|PHP|46.019
Poland|zloty|1|PLN|6.627
Romania|new leu|1|RON|6.258
Russia|rouble|100|RUB|59.842
Singapore|dollar|1|SGD|16.137
South Africa|rand|1|ZAR|1.894
South Korea|won|100|KRW|1.986
Sweden|krona|1|SEK|2.989
Switzerland|franc|1|CHF|22.569
Thailand|baht|100|THB|62.119
Turkey|lira|1|TRY|9.469
United Kingdom|pound|1|GBP|34.361
USA|dollar|1|USD|20.179
FCC details
channel logs.
regards
rajuHi Peddaraju,
Cross check correct source directory and file name is maintained in the sender file communication channel. If everything is fine try to restart the XPI File Adapter service in NWA.
Troubleshoot as suggested in the below thread:
File Adapter in PI not reading file from file system.
Regards,
Krupa -
Not able to pick PO text via READ_TEXT when PO is created by copy.
Hi,
I am not able to pick PO texts from READ_TEXT function module for PO's which are created via Copy of another PO as entries for that PO texts are not found in STXH table.However after creating PO if I do some modification in any text and save PO again then READ_TEXT is able to pick that text.
Please help.
Thanks.>
powerstar wrote:
> PLease try the sample code as shown below..
>
> data: lc_ebeln type ekpo-ebeln,
> lc_ebelp type ekpo-ebelp,
> lc_text type thead-tdname,
> lc_id type thead-tdid,
> lc_object type thead-tdobject.
>
> data: it_tline type table of tline,
> wa_tline type tline.
> *wa_ekpo type ekpo.
>
> concatenate wa_ekpo-ebeln wa_ekpo-ebelp into lc_text.
>
>
> lc_id = 'F03'.
> lc_object = 'EKPO'.
> call function 'READ_TEXT'
> exporting
> client = sy-mandt
> id = lc_id
> language = 'E'
> name = lc_text
> object = lc_object
> * IMPORTING
> * HEADER =
> tables
> lines = it_tline
> exceptions
> id = 1
> language = 2
> name = 3
> not_found = 4
> object = 5
> reference_check = 6
> wrong_access_to_archive = 7
> others = 8
> .
> if sy-subrc <> 0.
> * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
> * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
> endif.
>
> Regards,
> *******.
Did you get a chance to see what the OP is asking about? -
I used to be able to pick up wirless all over my house. I went on vacation and when I came back, it will only pick it up in one room. My phones can pick it up all over. What can I do?
rvaro2 offers good advice and you should do that first.
If that doesn't work then it's worth checking with iStumbler (Google will find it) to see if any of your neighbours have installed a wireless router while you were away. If you can choose a channel number for your router that is well away from any of your neighbours' channels then you might get better reception.
Bob -
From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.
Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address.
Maybe you are looking for
-
How to suppress an error message
Hi all, I would like to suppress an error message ORA-0000:normal; successful completion How to do it.. if suppose I need to do it on the On-Error trigger. Thanks
-
IOS 5 update failed Error 1. How do I fix this?!
I've tried to restore my phone at least ten times and get error 1 every time. I've googled ways to get around it but none of them work. Anybody else have this problem?
-
I have a picture saved to media card - how do I use it as phone display picture thanks.....
-
HT204406 iTunes match isn't working
Ive been using match for several years with no problems. However, it doesn't seem to be working now...songs are not adding to the cloud, and my iphone isn't adding any new songs because of it. I let match run overnight, but t was always getting caugh
-
Installing Java Development Pieces on Client
How do I install the missing java pieces on the client machine without installing an entire workflow/database instance? I've installed Workflow 2.6.2 on a Linux server. I've installed the 9.0.2 client on my Windows laptop. I can connect to the server