Cannot connect to SAP R/3 (datastore RD_110 using host n1.n2.n3.n4 , cli
We use Business Objects Data Integrator 6.5 to connect to SAP R/3 system to generate ABAP extracts and load these extracts into a custom Oracle database. The current production R/3 system is in 4.6. We are planning to upgrade the R/3 system to ECC 6.0 and currently testing our interface from BODI 6.5 to R/3 6.0. We were able to successfully create a data store point to R/3. However when we execute a job, we get the following error
Cannot connect to SAP R/3 (datastore <dsname> using host <host ip>, client <cl#>, user <uname>, and system number <0>. Please make sure the SAP R/3 server is running and login information is correct.
The same login info was used to connect SAP GUI and it is working and we are able to execute the ABAP extractors. We have also tried running the RFC_GENERATE_AND_EXECUTE_ABAP function and it is executing as well.
BODI is installed on Solaris and R/3 is on Aix.
Any help with this would be greatly appreciated.
Thanks
We use Business Objects Data Integrator 6.5 to connect to SAP R/3 system to generate ABAP extracts and load these extracts into a custom Oracle database. The current production R/3 system is in 4.6. We are planning to upgrade the R/3 system to ECC 6.0 and currently testing our interface from BODI 6.5 to R/3 6.0. We were able to successfully create a data store point to R/3. However when we execute a job, we get the following error
Cannot connect to SAP R/3 (datastore <dsname> using host <host ip>, client <cl#>, user <uname>, and system number <0>. Please make sure the SAP R/3 server is running and login information is correct.
The same login info was used to connect SAP GUI and it is working and we are able to execute the ABAP extractors. We have also tried running the RFC_GENERATE_AND_EXECUTE_ABAP function and it is executing as well.
BODI is installed on Solaris and R/3 is on Aix.
Any help with this would be greatly appreciated.
Thanks
Similar Messages
-
After a system restart i cannot connect to SAP with SAPGUI.
After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno 00
sid SVI
systemid 324 (IBM iSeries with OS400)
relno 6400
patchlevel 0
patchno 147
intno 20020600
make: single threaded, ASCII, 64 bit
pid 380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c 1100]
shared lib "dw_xml.so" version 147 successfully loaded
shared lib "dw_xtc.so" version 147 successfully loaded
shared lib "dw_stl.so" version 147 successfully loaded
shared lib "dw_gui.so" version 147 successfully loaded
shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00 <
DpShMCreate: sizeof(wp_adm) 10712 (824)
DpShMCreate: sizeof(tm_adm) 3021432 (15032)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 216000 (432)
DpShMCreate: sizeof(vmc_adm) 0 (448)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c 10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00 <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00 < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c 2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c 3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c 2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 404
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 025901
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 025901
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low = 0xfffffffffffdb30
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
Unknown at 0x3618
sleepms() at 0x1000f9324
SpinLockSemRq1() at 0x1000f926c
SemRq() at 0x1000fcf6c
ThIPCInit() at 0x1000ac1a0
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
=> CPU Registers:
msr = 0x800000000000f032 iar = 0x0000000000003618
ctr = 0x0000000000003610 lr = 0x09000000000a2890
xer = 0x0000000008000000 cr = 0x000000002a404445
r00 = 0x0000000000000000 r01 = 0x0ffffffffffff3f0
r02 = 0x00000000000000a4 r03 = 0xffffffffffffffff
r04 = 0x0000000000000000 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0ffffffffffff520
r08 = 0x0000000000000001 r09 = 0x0000000010108003
r10 = 0xb00010000c90e000 r11 = 0xb00010000c90ef30
r12 = 0x0900000000001eb0 r13 = 0x0000000182784a50
r14 = 0x0000000000000002 r15 = 0x00000001810e6c48
r16 = 0x0ffffffffffffb28 r17 = 0x000000018001bf20
r18 = 0x0000000000000003 r19 = 0x0000000000000004
r20 = 0x0000000180c6de34 r21 = 0x0000000180c6de28
r22 = 0x000000018004ce60 r23 = 0x0000000180c6e244
r24 = 0x0000000000000064 r25 = 0x0000000000000158
r26 = 0x0000000000000158 r27 = 0x0000000000000000
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a005ec48 r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library |(SRV)PGM |Module |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente Tipo % CPU Funzione Stato
R3_00 QSYS SBS 0,0 DEQW
DISP_WORK SVI00 BCI 5,3 PGM-disp+work CNDW
GWRD SVI00 BCI 10,9 PGM-gwrd RUN
ICMAN SVI00 BCI 1,8 PGM-icman RUN
MSG_SERVER SVI00 BCI 0,0 PGM-MSG_SERVER SELW
RSLGCOLL SVI00 BCI 0,0 PGM-rslgcoll SELW
RSLGSEND SVI00 BCI 0,0 PGM-rslgsend SELW
SAPOSCOL SVI00 BCI 1,0 PGM-SAPOSCOL RUN
SAPSTART SVI00 BCH 0,0 PGM-sapstart EVTW
WATCHDOG SVI00 BCI 0,4 PGM-disp+work SELW
WP00 SVI00 BCI 1,0 PGM-disp+work RUN
WP01 SVI00 BCI 1,0 PGM-disp+work RUN
WP02 SVI00 BCI 1,0 PGM-disp+work RUN
WP03 SVI00 BCI 1,1 PGM-disp+work RUN
WP04 SVI00 BCI 0,9 PGM-disp+work RUN
WP05 SVI00 BCI 0,9 PGM-disp+work RUN
WP06 SVI00 BCI 0,8 PGM-disp+work RUN
WP07 SVI00 BCI 0,6 PGM-disp+work RUN
WP08 SVI00 BCI 0,0 RUN
ACTIVE JOBS OF WORKING SYSTEM
R3_03 QSYS SBS 0,0 DEQW
DISP_WORK TST03 BCI 0,0 PGM-disp+work SELW
GWRD TST03 BCI 0,0 PGM-gwrd SELW
ICMAN TST03 BCI 0,0 PGM-icman SELW
IGS400 TST03 BCI 0,0 PGM-igswd_mt THDW
IGS400 TST03 BCI 0,0 PGM-igsmux_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
MSG_SERVER TST03 BCI 0,0 PGM-MSG_SERVER SELW
RSLGSEND TST03 BCI 0,0 PGM-rslgsend THDW
SAPSTART TST03 BCH 0,0 PGM-sapstart EVTW
WATCHDOG TST03 BCI 0,0 PGM-disp+work SELW
WP00 TST03 BCI 0,0 PGM-disp+work SEMW
WP01 TST03 BCI 0,0 PGM-disp+work SEMW
WP02 TST03 BCI 2,5 PGM-disp+work RUN
WP03 TST03 BCI 0,0 PGM-disp+work SEMW
WP04 TST03 BCI 0,0 PGM-disp+work SEMW
WP05 TST03 BCI 0,0 PGM-disp+work SEMW
WP06 TST03 BCI 0,0 PGM-disp+work SEMW
WP07 TST03 BCI 0,0 PGM-disp+work SEMW
WP08 TST03 BCI 0,0 PGM-disp+work SEMW
WP09 TST03 BCI 0,0 PGM-disp+work SEMW
WP10 TST03 BCI 0,0 PGM-disp+work SEMW
WP11 TST03 BCI 0,0 PGM-disp+work SEMW
WP12 TST03 BCI 0,0 PGM-disp+work SEMWFollowing your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 317
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 028178
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 028178
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL started with length 64000000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP started with length 16776192 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF started with length 40960k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA started with length 16383k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function 5
C Package DDNTFIH Library R3SVIA2062
C Main_Pgm Main_Lib
C Statement_Name "Wx3AAADpDB" Cursor_Name "CADDNTF16461"
C Open_Options x80 Clause_For_Describe N
C Commitment_Control C
C Date_Format USA Date_Separator /
C Time_Format USA Time_Separator :
C Naming_Option SYS Decimal_Point .
C Blocking_Factor 1 Scrollable_Option 0
C Position_Option 0 Relative_Record 0
C Rows_To_Insert 0 Direct_Map N
C Reuse_DA N Name_Check Y
C Use_Ptrs 0 With_Hold N
C Close_File_Name Close_Library_Name *THRESHOLD
C Reopen 0 Use_Perf 1
C Query_Compl. (Reval) ! Statement_Text_CCSID 819
C Sort_Sequence_Table *JOB Sort_Sequence_Library *LIBL
C Language_ID *JOB Allow_Copy_Data S
C Allow_Blocking L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c 93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low = 0xfffffffffffd6f0
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
AixStack() at 0x10008d040
CTrcStack2() at 0x10008d138
ThControl() at 0x1006551a4
dyThControl() at 0x1003ab070
dextIntern() at 0x1003aa06c
sap_dext() at 0x1003aff24
dbeh_exit() at 0x100416924
db_ntab() at 0x10039d48c
read_ntab() at 0x101512474
db_cbufload() at 0x10150f40c
reset_handling() at 0x101512f00
init_shm_and_load_cals() at 0x10151394c
db_cbufinst() at 0x101514c48
db_calinit() at 0x1005ae8bc
db_init() at 0x1001c7ae0
ThCallHooks() at 0x1000c3654
ThIPCInit() at 0x1000ac574
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library |(SRV)PGM |Module |Function/Statement No.
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c 355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c 9564]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ? -
Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard
Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard error Http error 403 or 500 internal server error. I am using ubuntu mysql.
a manual php script work fine
<?php
// open connection to mysql server
$dbc = mysql_connect('localhost','root','password');
if (!$dbc) {
die('Not Connected' . mysql_error ());
//select database
$db_selected = mysql_select_db ("msinventory",$dbc);
if (!$db_selected)
die('Cannot Connect' . mysql_error());
echo "TEST DONE1";
?>
but the database connection wizard fails with http error 403 or 500
i also use the HeidiSQL client and it works, the only problem is in dreamweaver.OK. Did you really mean to ask this question on a ColdFusion forum, if it's DreamWeaver you're having problems with? You're probably better off raising this on a DreamWeaver forum. "Using the correct tool for the job" 'n'all.
Adam -
I cannot connect my I pad mini and iPhone using Bluetooth.
I cannot connect my I pad mini and iPhone using Bluetooth.
I'm not sure what made you think that that was not what Regal trail was asking... I am having the same problem and wish that that question had been answered! I believe I've gone through the same steps that used to work, to no avail now. But I'm betting that you (Chris) have the answer to this!
In a nutshell: I'm trying to share my iPhone's cellular connection with my WiFi-only iPad Mini, using a Bluetooth connection. I used to do this regularly, but went for a period of time without the need for it, and so am hard pressed now to identify which thing that might have changed during the interim would have made it no longer work.
iPhone is connected to internet via cellular data (AT&T LTE). Bluetooth is on. Personal Hotspot is on.
On iPad, Bluetooth is on. My iPhone shows up in the list under My Devices, and I can select it, and it will connect for approximately 5 seconds. The shared connection icon shows up on the iPad. The iPhone (on the Bluetooth screen) shows, for those 5 seconds, that the iPad is connected, but the shared connection status bar never shows up on the iPhone.
After 5 seconds, it disconnects.
Thoughts? Need more info? Let me know! Thanks. -
Why i cannot connect my dvd writer and cd writer using ide2???
why i cannot connect my dvd writer and cd writer using ide2???
can anyone help?Why is it that i cannot connect both the harddisk to IDE1 and both writers to IDE2 or IDE3?
Currently i am only connecting my Samsung 80G and Sony DRU810A to IDE1.
Can anyone help?
PowerLogic 450W
Intel Pentium 4 2.8Ghz FSB 533/775
512Mhz Kingston PC - 4300 DDR2 533 CL4
MSI 915P Neo2 FR
Samsung 80G 7200rpm 2MB
Maxtor 40G 7200rpm 2MB
Sony DRU810A 16xDVD+-R (8xDL)
Iomega cdrw 40x12x40 -
help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?
Same :(
Do you have any problem with apps? I can download or update apps without problem. Also no problem with podcasts, but no music, no video or movie: cannot connect to iTunes Store :( -
Data connection from SAP-R3 System to Xcelsius using Web Services
Hello Everybody,
Anyone tryed connecting data from SAP-R3 System to Xcelsius using Webservices? (created in ABAP function module)
SDN downloaded document says to Generate Webservice URL through ABAP (by creating function module) and import it in xcelsius
Data -> Add Web service connections
by giving the URL to import. After giving the web server login credentials, the error says 'Unable to load URL'
Any idea would be great help
Note: I tried by following the thread & its not working:
http://forums.sdn.sap.com/thread.jspa?threadID=1520321
Thank you,
Anand
Edited by: Anand Amirtharaj on Feb 20, 2012 7:51 AM
Edited by: Anand Amirtharaj on Feb 20, 2012 7:53 AMHi,
With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP" <- can you tell me more please? references/links/attachment?
As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
There are limitations about the complexity of the WSDL - see Notes:
1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
also , changes between SAP versions requires reworking the WSDL
Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
regards,
H -
Cannot connect to EM on ODD guest from Windows host
Hello,
I cannot connect to the Enterprise Manager in my guest VM from my host. From a IE v8.0 browser, the recommended link https://192.168.56.101:1158/em fails to connect.
I installed Oracle VM VirtualBox 4.0.4 on a Windows 7 laptop and imported the Oracle Developer Days (ODD) VM appliance. Within the ODD VM I started Enterprise Manager with the cmd "emctl start dbconsole". I confirmed the listener is up and running in the ODD VM.
I checked my Windows Firewall and the MS Telnet Client is allowed through on IP 192.168.56.101 on local port 1158.
Suggestions?
Cheers,
DavidApple Support could reproduce the problem, and provided the solution:
Assuming that VNC is configured in the sharing prefs (under Apple Remote Desktop), it is enough to disable ARD in the sharing prefs. Once you do this (presumably via Apple Remote Desktop) you'll obviously lose your connection.
To restart ARD again from the commandline, connect to your server with ssh and issue the following commands:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
now you should be able to connect to your server with ARD again....
.... and all connections with VNC should work as well!!
splendid, thanks apple support! -
I cannot connect my apple trackpad to my iMac using Mavericks.
Ok, I am reading A LOT of issues with Mavericks. I am tempted toi go back to lion or snow leapord. This is shameful on Apple's part. Safari is unuseable. hard drives drop on setstart
And now I cannot connect my apple track pad. No matter what I do, It will not connect. I have read re-installing the OS will work, which means I have to re-install everytghing. Not happy. At this rate I might as well run windows 8.um... having to update most of the system software is still incredibly time consuming, and I already did it once. Problem persists. Mavericks is fail. Period. The ONLY thing that made paying the premium for a mac WAS the OS. Now? Taking this heap back tomorrow and getting a PC. If I have to trouble shoot this much it would be better if I save money and can play games. Apparently with the death of Jobs so to does the OS die.
-
I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.
I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
... And no I am not trying to connect both at once. To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair. The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect. -
I need help. I cant update my apps because of I cannot connect to iTunes store. I have tried all suggestions with no success.
Ok, I found a solution that worked for me when trying to connect to the iTunes store by tapping the "update" button in the "App Store" app on my iPad 2. Before the solution was implemented I'd always get the error message "cannot connect to iTunes store". Once the solution was implemented I now can connect to iTunes using the "update" button in the "App Store" app and I get the normal message "All apps are up to date". The solution is this: go into Settings, then General, then scroll to the bottom where it says Date and Time. Tap Date and Time and then turn OFF Set Automatically. When you do that a new option will be added that says Set Date and Time. Tap it. You'll now get a drop down feature. Set the Date AHEAD 2 YEARS. The Time you can leave alone.
Once you do that you might get a bunch of reminders and messages that your apps and stuff haven't been updated in two years. Click cancel or close on each of those messages or reminders. Now go back into Settings, General, Date and Time, and turn Set Automatically back to ON. Reboot your iPad. Open the App Store app again and go to the Update button. It might ask you to log back in to your iTunes account. It should now work. If not, close the App Store app completely and open again and try the update button. Hope this helps. -
Cannot Connect Pavilion dv6 2020sa laptop to HDTV using HDMI cable
Hi
I have tried to connect my laptop to HDTV using HDMI cable but it just comes up with a 'No Signal' message on TV, any ideas? I have done a search on internet with no joy.
Operating system is Windows 7
TV is 32" LG LCD HDTVI have been having the same issues trying to connect my Laptop to my TV to use as a DVD player. A normal HDTV cable would not work. I went to Best buy, and found a HDMI cable that said "Laptop to HDMI cable" It was the only HDMI cable out of all of the HDMI that said "Laptop to HDMI". It was also twice the cost, $50.00 for a 10 foot cable. It seems a little to high in price so I am looking for a cheaper one on the web. If I find one, I will post to let you know.
-
Java Application as jar File cannot connect to SAP via JCO
Hey guys,
I wrote a test class to play a little with the java connector. Everything worked fine.
Now I want to pack my java class and the JCO classes in one jar file. I have written a manifest file with the Main-Class statement and after I start the jar file I got following exception:
Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classIniti
alize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [no sapjco
rfc in java.library.path]. java.library.path [C:\WINDOWS\system32;.;C:\WINDOWS\S
ystem32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Ja
vaConnector\sapjco.jar;C:\j2sdk1.4.2_12\bin;]
at com.sap.mw.jco.JCO.<clinit>(JCO.java:776)
at de.lymez.sti.SAPAufruf.getDocnr(SAPAufruf.java:26)
at de.lymez.sti.Aufruf.main(Aufruf.java:12)
Can anyone help me? I don't think that I forget something during the JCO installation, because my class file worked fine and give me the correct values out of the SAP System.
Best regards,
TimoThanks Vladimir,
but I followed the Tutorial and copied every dll in the wright folder and set the pathes. In one of the threads someone told about a tool named dependency walker. I used this with the sapjcorfc.dll and the tool answered that the DRVADODB.DLL is not found. Can anyone send me this dll? And why worked everything fine, when I use the class? I only have problems when I use one jar file!
Thanks for any help!!
Regards,
Timo -
Cannot connect to the Internet with browser when using VPN
I am experiencing an odd network problem and am hoping that someone on this list has seen something similar and can help me isolate the cause.
I have a Mac Pro running Mac OS X (10.5.8) and use Cisco's VPNClient to connect to my employer's network. Some time in the last year I started getting this odd behavior wherein that while connected via VPN, I cannot open external web pages in Safari (Version 5.0 (5533.16)). When this happens I get the following message:
+Safari can't open the page "http://www.google.com/" because your computer isn't connected to the Internet.+
Web pages on the company's internal network work fine. Firefox exhibits the same problem. However, the very odd thing (to me), is that I can get to the Internet using the browser in NetNewsWire. Other services (like twitter) also seem to work fine.
The problem is intermittent and occurs between restarts. After some restarts the problem is not there. Also, connecting and re-connecting via VPNClient does not affect the behavior. If access to the Internet is working then it will continue working, at least until the next restart. If I restart for whatever reason (software update, etc.) the next time it may or may not work.
This has been going on over several updates to Mac OS X and Safari.
Another clue is that my MacBook, also running 10.5.8 works fine when connected from the same home network so I am pretty sure the problem is with my Mac Pro.
Anyone out there have any idea what could be causing this and how to go about fixing the problem?
Thanks in advance,
KPEarthlink can be challenging. Have a look at this
very helpful post from Eme.
This may lead you in the right direction.
World leaks relates to memory issues with Safari that
are on-going and being addressed in the developer's
community. More information can be found
here.. To
stop the warning message, go to your Debug menu and
deselect "always check for world leaks".
iMac G5 Rev C 20" 2.5gb RAM 250 gb
HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac
OS X (10.4.8) LaCie 160gb d2 HD Canon i960
printer
I couldn't fix it, and the Earthlink technician couldn't fix it...until she checked and found that the starting address: "www.my.earthlink.net" is down. In fact, it's still down, so I'll just continue using Foxfire for awhile. I can connect by typing "www.earthlink.net" in the addres bar, but it's so much easier to just click on Foxfire in my dock. This shows the value of having a spare browser.
I'm going to mark it "solved. Thanks for your help, It was a bit technical for me, but I tried. I had to, having just sent an article about the value of persistence to a friend, how could I fail to persevere? -
Cannot connect 2 external monitors via port replicator using Portege Z30-16U
Hi All
I need hell I just moved from a other laptop to the Portege Z30-16U, I have spent hours trying to connect my 2 external monitors to my Hi-Speed Port replicator III 120W but my laptop will only see one monitor.
I have been using 2 external monitors with my laptop for yrs as I do a lot or reading and I do not want to use only one and the laptop screen.
I have tried VGA cables and mix of a VGA and a HDMI but nothing is working.
Can anyone tell me how I can connect and view 2 external monitors with this laptop and port replicator, I cannot believe it is not possible it would make no sense that Toshiba would be so technilogically behind other laptop manufacturers.
Thanks
LigaHi
I am not familliar with the Portreplicator of Z30, but the general behaviour of the dual-displayconnector replicators is that 1 can be used.
Not 2 simultaneously.
I may be wrong and you should easily be able to check this - use only 1 at a time.
First one, then the other.
If both works when used alone, then my suspicion is right.
Hope this helps!
BR TOm
Maybe you are looking for
-
Adobe Acrobat Pro & Reader 9 broken
I downloaded and installed the latest updates yesterday which included Mac OS X 10.6.3. When I tried to open a PDF with Adobe Acrobat Pro 9, it immediately crashes. The same is true for Acrobat Reader 9. I can open PDFs just fine with Preview. Howeve
-
8.1 PDF printer missing - XP
I use Acrobat 8.1 with XP Pro. Yesterday I noticed I couldn't convert to PDF using the 1 button or right click. Eventually re-installed the program, and got the infamous "Unable to creat PDF converter. Tried fix and repair install, says I don't have
-
PHOTOSHOP ELEMENTS ON A NOTEBOOK?
I AM HOPING I CAN RUN PHOTOSHOP ELEMENTS 7 ON A SMALL LIGHT NOTEBOOK TO TAKE ON 'PHOTO SAFARI'... WILL THAT SOFTWARE WORK ON THE TII5D-S1120 WITH 1.6GHz/2GB/250GB?
-
Wie schon im Titel beschrieben: Auf meinem Macbook Pro 13' mit Yosemite stürzt Illustrator CC 2014 (Oktober Release) immer beim Benutzen des Krümmungswerkzeugs ab. Reboot etc. bereits versucht, hat nicht geholfen. Vielleicht kann mir ja hier jemand h
-
Database automatically imports xml data into pdf - issues
Hi Guys, I have another important question. I have LCD 8.0 where I created a pdf form. An Access database should pull information from the XML and import automatically into the pdf file without human interaction. The code I am using for importing (wh