Cannot edit folder properties more than once???

If I edit a folder property so that the links opens in the same folder area, it gives me the following error if I try to edit the properties again.
An Unhandled Exception has occurred. ORA-06502: PL/SQL: numeric or value error: character to number conversion error
And for the same folder I get the following error if I click to preview it while editing.
Error: Call to utl_http failed (WWS-32136)
ORA-1: User-Defined Exception (WWC-36000)
If anyone has a workaround for these errors, it will be appreciated.
-Viral

Hi ell_ell_tee,
I just checked it works fine for me. I used this page actually. Have you checked to see if it is just the particular website that you were looking at? It could be an isolated incident.
You could also try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

Similar Messages

  • ORA-00604 & ORA-30512 CANNOT MODIFY TABLE MORE THAN ONCE IN A TRANSACTION

    We have a requirement where two tables should be in sync at any given point
    in time with respect to the structure of the tables.
    Any change on table/column via ALTER (MODIFY, ADD, RENAME COLUMN, DROP
    COLUMN) on the parent table should be replicated to the replica table.
    I created a DDL_TRIGGER on the schema and the desired result is achieved but
    for the following one scenario for which its failing.
    The issue is, if we try to reduce the width of the column (via ALTER ..
    MODIFY) it fails with the following error
    ORA-00604: error occurred at recursive SQL level 1
    ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
    transaction
    Please follow the steps to reproduce the issue (the issue is across the DB
    version checked on 10.2, 11.1 and 11.2 DB version)
    -- Step1 Create Parent Table
    CREATE TABLE abc (col1 VARCHAR2(10))
    -- Step2 Create Replica Table
    CREATE TABLE replica_abc (col1 VARCHAR2(10))
    -- Step3 Create DDL Trigger
    CREATE OR REPLACE TRIGGER ddl_trigger
    AFTER ALTER ON SCHEMA
    DECLARE
    operation VARCHAR2(30);
    object_name VARCHAR2(30);
    l_sqltext VARCHAR2(100);
    i PLS_INTEGER;
    l_count NUMBER:=0;
    sql_text dbms_standard.ora_name_list_t;
    BEGIN
    i := dbms_standard.sql_txt(sql_text);
    SELECT ora_sysevent, ora_dict_obj_name, UPPER(sql_text(i))
    INTO operation, object_name, l_sqltext
    FROM dual;
    IF ora_dict_obj_name = 'ABC' THEN
    l_count := INSTR(l_sqltext,'ADD CONSTRAINT',1,1);
    l_count := l_count + INSTR(l_sqltext,'DISABLE',1,1);
    l_count := l_count + INSTR(l_sqltext,'DROP CONSTRAINT',1,1);
    l_count := l_count + INSTR(l_sqltext,'PRIMARY KEY',1,1);
    l_count := l_count + INSTR(l_sqltext,'ADD CHECK',1,1);
    IF (l_count = 0) THEN
    l_count := INSTR(l_sqltext,'ADD',1,1);
    l_count := l_count + INSTR(l_sqltext,'MODIFY',1,1);
    l_count := l_count + INSTR(l_sqltext,'DROP COLUMN',1,1);
    l_count := l_count + INSTR(l_sqltext,'RENAME
    COLUMN',1,1);
    IF (l_count >0) THEN
    l_sqltext := REPLACE(l_sqltext,'TABLE ABC','TABLE REPLICA_ABC');
    execute immediate l_sqltext;
    END IF;
    END IF;
    END IF;
    EXCEPTION
    WHEN OTHERS THEN
    RAISE ;
    END;
    -- Step 4 Issue the following ALTER command on the Parent table 'ABC'
    ALTER TABLE ABC MODIFY COL1 VARCHAR2(9);
    will show the following
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
    transaction
    ORA-06512: at line 34
    whereas the following commands works fine
    ALTER TABLE ABC MODIFY COL1 VARCHAR2(11);
    and also the rest of the operations
    ALTER TABLE ABC ADD COL2 VARCHAR2(20);
    ALTER TABLE ABC RENAME COLUMN COL2 TO COL3;
    ALTER TABLE ABC DROP COLUMN COL3;
    The issue is while reducing the size of VARCHAR2 columns, while the rest of
    option works fine.
    Any suggestion or workaround please.

    It looks like a bug to me. The failing statement from the SQL trace is
    PARSE ERROR #12:len=77 dep=3 uid=0 oct=3 lid=0 tim=1263332549608656 err=30512
    select /*+ first_rows */ 1 from "TIM"."REPLICA_ABC" where LENGTHB("COL1") > 9and exception cannot explain it.

  • How to retrict user cannot open the same form more than once (Forms 6i)

    Our users always open the same forms more than once. For example the customer form, the user may access a customer record in the first form, however, he will open a new customer form to edit the same record, the result is he cannot save the record because the record is locked in the first customer form.
    How can I control the user cannot open the same form more than 1 time.
    Best Regards,
    Kane

    The customer form is only an example, I found there will cause a lot of problems is I cannot control the user from calling 1 program more than 1 than within application. Sometimes a user (not good in using computer) will overlap the form for many times.....
    Is there any simple way to do that?...can I have some PL/SQL statement or build-in functions that let me easily found our what forms the user has already opened, then I can control whether I let him open this form or not.
    Urgent...please
    Thanks

  • 'PortfolioBacklogs' cannot appear more than once if content model type is "all"

    I'm trying to add another level above feature and have followed these instructions https://msdn.microsoft.com/en-us/library/dn217880.aspx
    The project is setup as scrum not agile, maybe that is why???, but I get the following error:
    'PortfolioBacklogs' cannot appear more than once if content model type is "all"
    and haven't been able to find where to change the content model type.

    Hi Dckennedy1, 
    Thanks for your post.
    What’s the version of your TFS? TFS 2013 Update 4? Your current team project created using default Scrum 2013.4 process template?  After which step you received this error? You can share your error screenshot(s) here.
    I created a new Scrum 2013.4 template team project in my TFS 2013 Update 4 Server, and followed the steps in that document to add Initiatives work item type in my TFS Web Access, the Initiatives work item type be added into portfolios successfully, you can
    refer to the below screenshot:
    The only difference with steps in that document is I edited the PortfolioBacklogs section as below in my ProcessConfiguration.xml file.
       <PortfolioBacklog category="MyCompany.InitiativeCategory" pluralName="Initiatives" singularName="Initiative">
          <States>
            <State value="New" type="Proposed" />
            <State value="In Progress" type="InProgress" />
            <State value="Removed" type="InProgress" />
            <State value="Done" type="Complete" />
          </States>
          <Columns>
            <Column refname="System.WorkItemType" width="100" />
            <Column refname="System.Title" width="400" />
            <Column refname="System.State" width="100" />
            <Column refname="Microsoft.VSTS.Common.BusinessValue" width="50" />
            <Column refname="Microsoft.VSTS.Scheduling.TargetDate" width="100" />
            <Column refname="System.Tags" width="200" />
          </Columns>
          <AddPanel>
            <Fields>
              <Field refname="System.Title" />
            </Fields>
          </AddPanel>
        </PortfolioBacklog>
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

    i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

    Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

  • Error: An attribute cannot appear more than once in the same start tag

    Hi Everyone,
    when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
    "Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
    And i delete the particular file from the path and run the page so this time it works fine.
    But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
    What can be the permanent solution for this issue?
    Plz let me know any suggetions.
    Thanks.

    Seems like the mdl file is corrupted or was not generated correctly.
    Can you try to create the mdl file again and then try the import ?
    If it doesn't work then try contacting Oracle Support.

  • I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once.

    I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once. Can you please help?

    Restart your Mac. See if that makes a difference.

  • Oracle.jbo.JboException: JBO-34010: The "adf/tabs/view/DataBindings.cpx" descriptor appears in the application classpath more than once:

    Hello
    We are using JDeveloper 11.1.1.6
    We have three 3 separate viewcontroller projects and one Master projects which i supposed to integrate all these projects into one.
    Issue:
    After putting all three together into the Master project, the app fails to deploy due to this error:
    oracle.jbo.JboException: JBO-34010: The "adf/tabs/view/DataBindings.cpx" descriptor appears in the application classpath more than once:
    We did some digging and found out that it is because of the fact that "DataBindings.cpx" in all three projects falls withing the default package. How do we rectify this issue. We cannot even Refector this file because that option is not available for this file. We have a demo soon, What can we do?
    Thanks...

    Hi,
    this error typically comes from name clashes. Apparently you created ADF libraries (or projects) that contain a DataBindings.cpx file. The DataBindings.cpx file seems to be located in the same folder structure and thus could not be merged but are found to be added twice. When you create new view controller projects then best practice is to ensure the root package name is unique to avoid such issues.
    Frank

  • Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

    Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct."  Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

    You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
    Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    The situation with iCloud and Snow Leopard is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

  • How do I repeat the same row more than once in report 10g

    How do I repeat the same row more than once in report 10g
    So I can print the bar code more than once
    in report;
    Edited by: user11106555 on May 9, 2009 5:50 AM

    GREAT THAN X MAN
    It is already working, but with the first ROW
    select ename from emp
    CONNECT BY ROWNUM<=5
    ENAME
    SMITH
    SMITH
    SMITH
    SMITH
    SMITH
    ALLEN
    WARD
    JONES
    MARTIN
    BLAKE
    CLARK
    SCOTT
    KING
    TURNER
    ADAMS
    JAMES
    FORD
    MILLER
    BUT I want this result
    Item1
    Item2
    Item3
    to
    Item1
    Item1
    Item1
    Item2
    Item2
    Item2
    Item3
    Item3
    Item3

  • Performance... Why a function column in a view is executed more than once...?

    Why a function column created inside a view is executed more than once when called more than once?
    EXAMPLE:
    create or replace view aux1 as
    date_column,
    any_function(date_column) column1
    from any_table
    create or replace view aux2 as
    column1 c1,
    column1 c2,
    column1 c3
    from aux1
    select * from aux2
    It will execute 3 times the function any_function... logically the value will be the same for all columns...
    I understand why!... are 3 calls... but...
    Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
    tks
    Braga

    Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.2.0 - Production
    create view v1 as select dbms_random.value(1,100) r from dual;
    create view v2 as select r r1, r r2 from v1;
    select * from v2;
              R1           R2
              93           74
    Connected to:
    Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.3.0 - Production
    create view v1 as select dbms_random.value(1,100) r from dual;
    create view v2 as select r r1, r r2 from v1;
    select * from v2;
              R1           R2
              78           78Richard

  • How to use same page fragment more than once in a page,

    Hi Gurus,
    How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
    I want to use the same page fragment multiple times on the same page with different tabs.
    I want different ApplicationModule Instance for the page fragment in different tabs.
    So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
    I've dragged the taskflow to page and created regions.
    I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
    Can anyone help me how to resolve this issue.
    Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
    Thanks,
    Satya

    java.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
    +id: j_id_id1
    type: javax.faces.component.UIViewRoot@1d23189
      +id: d1
       type: RichDocument[UIXFacesBeanImpl, id=d1]
        +id: j_id_id5
         type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
          +id: j_id0
           type: javax.faces.component.html.HtmlOutputText@bc252
        +id: m1
         type: RichMessages[UINodeFacesBean, id=m1]
        +id: f1
         type: RichForm[UIXFacesBeanImpl, id=f1]
          +id: pt1
           type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
            +id: ps1
             type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
              +id: pt3
         at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
         at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
         at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
         at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
         at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
         at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
         at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID =  CONTEXTID =  TIMESTAMP = 1262712477691 
    WatchAlarmType: AutomaticReset
    WatchAlarmResetPeriod: 30000
    >
    <JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
    oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
    Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
    DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
    DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
    DIA-48494: ADR home is not set, the corresponding operation cannot be done
    Action: Ensure that command line tool "adrci" can be executed from the command line.
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
         at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
         at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
         at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
         at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
         at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
         at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
         at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
         at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
         at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
         at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
         at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
         at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
         at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
         at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
    set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
    set homepath diag\ofm\defaultdomain\defaultserver
    create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
    Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
    DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
    DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
    DIA-48494: ADR home is not set, the corresponding operation cannot be done
    Action: Ensure that command line tool "adrci" can be executed from the command line.
         at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
         at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
         at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
         ... 19 moreI get the above Error.
    I have checked the bindings and it has 2 instances of the taskflow.
    I have changed the backingbean scope to backingBean

  • Use of same filed more than once in module pool program.

    hi Good day,
    i want to use a filed on the screen more than once.
    ex : T7EHS00_EXA_PHY-UNIT
    the reason why i want to use this field more than once is b'coz it has SEARCH HELP.
    If i use this filed search help is created internally.
    to be more specific :
    i have
    screen field    screen field
    xys                unit of meas.
    abc                unit of meas.
    def                 unit of meas
    ghi                 unit of meas.
    jkl                  unit of meas.
    but SAP Does not accept the same field more than once.
    in this case what can i do?
    thank you,
    J.

    Hi Jacob,
    use like this....
    data : i1 type T7EHS00_EXA_PHY-UNIT ,
            i2 type T7EHS00_EXA_PHY-UNIT,
            i3 type T7EHS00_EXA_PHY-UNIT,
            i4 type T7EHS00_EXA_PHY-UNIT.
    In the screen properties,
    Give search Help-----> H_T006
    Declare the name in program as given to IO filed name...
    Hope you Understood...
    Regards,
    Vijay SR

  • Document contains some order item more than once - invoice verification

    Hi,
    we have one cross company stock transfer process in which when a billing is created in SD side, an IDOC will be triggered automatically and create an invoice verification at the MM side.
    The problem is some of our billing of this process having an IDOC application error that said.
    Document contains same order item more than once
    Message no. M8321
    Diagnosis
    Under the following circumstances, you can settle an order item in an invoice received via EDI more than once:
    - Goods-receipt-based Invoice Verification has been defined for the order item.
    - The IDoc contains the delivery note numbers of the goods receipts.
    System Response
    If this is not the case, the system cancels posting of the IDoc.
    Question:
    1 - The funny thing is IDOC showing 51 IDOC error code message on status record of INVOIC. But the invoice verfication get created in PO history.
    2 - I think this error is because we need to make the PO as GR-based Inverifcation. We have flagged it in Vendor master, and Info record, but this indicator is not flag automatically in the PO (and we cannot manually change the PO as this indicator is grey-out). How?
    3 - how to solve this error?
    Thanks

    Once PO history is created, you cannot change the "GR-based-IV" flag. Two options are there before you.
    1. Cancel all the GRs & Invoices posted in the STO then system will allow you to update the GR-based-IV flag. After updating this flag repost the GRs and invoices.
    2. Create a new STO, now since you have updated the vendor maser & info-record, this flag will automatically get updated during the STO creation itself.
    First option is tedious and should be selected only if you can go option 2 is not at all feasible

  • Can the same partner function be entered in the sales order more than once.

    Hi
    I know that as per standard same partner function cannot be entered more than once in Sales order.
    If somebody has tried ways to do this please share.
    THanks
    Alags

    Yes. You can have multiple Ship to Party, Bill to Parrty & Payer in Sales Order. But Sold to Party will have to Unique & single.
    This functionality of having multilpe Partners is widely used & just follow as Deepak suggested above & you too can have multiple Partners of same type in single Sales Order.
    But there has to be a strong Business case in doing so... say different Ship tp Party for different line items in Sales Order or different BIll to Party for some line Items in Sales Order.
    Hope this helps,
    Thanks,
    JIgnesh Mehta

Maybe you are looking for