Cannot Find "BEFSR41" Behind "WET610N"

Just upgraded to a WRT610N version 2 in my office. It pulls an IP address from my cable router and hands out IP addresses (it's setup for DHCP) w/o issue. I need to extend the home network to another part of the house so I picked up 2 x WET610N wireless bridges. Since mulitple devices will need to use the bridge I'm going to recycle my BEFSR41 as a switch. I have the bridge and router setup; the bridge connects to the "uplink" port on the router and the DHCP has been disabled on the router. But when I run Network Magic it cannot find the BEFSR41 router on the other side of the bridge. Any ideas?

jonesv wrote:
Just upgraded to a WRT610N version 2 in my office. It pulls an IP address from my cable router and hands out IP addresses (it's setup for DHCP) w/o issue. I need to extend the home network to another part of the house so I picked up 2 x WET610N wireless bridges. Since mulitple devices will need to use the bridge I'm going to recycle my BEFSR41 as a switch. I have the bridge and router setup; the bridge connects to the "uplink" port on the router and the DHCP has been disabled on the router. But when I run Network Magic it cannot find the BEFSR41 router on the other side of the bridge. Any ideas?
Hi jonesv,
Network Magic does not work with Bridges or sees anything connected to a Bridge.
However, you could use Routers as a Wireless Access Point in different parts of your home and run an Ethernet Cable from the Routers to the Access Points and Network Magic would see the Computers that way.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Similar Messages

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

I cannot find my MacBook Pro serial number anywhere!?

I just recently purchased my MacBook Pro from a seller locally on Craigslist. I couldn't find the serial number on the surface of the laptop (under the battery) or through the system:
I have been searching all over Apple's website for this, but I cannot find any information on it!
Please don't tell me it's "stolen" because every product I have registered goes through fine and I get no error. Additionally, the guy I bought it from said that he had a fresh installation of the new OSX Lion and it didn't give a serial number.
I'm new to the Apple Mac products, and when I saw my cousin's old MacBook I was able to find his serial number was engraved behind his battery.
Mine doesn't show anything engraved at all, besides what model #'s the laptop contains.
Further info:
15"
Model #: A1226

The 1st picture shows as such because I clicked it. I'm assuming this is what you're talking about:
I was stupid because I completely forgot when I met up with him that I texted him asking what the serial # was and he didn't reply.
Then when I met up with him, he even told me to go over the mac, test it out, and ensure myself that I was happy with it. As I looked for the serial number, I didn't see it, and that's when I asked him why it was missing.
He said the number erased because he had to do a "fresh installation" of the OSX Lion. I read in other articles that people have had to do this with the older MBP models (aka core 2 duo) and it has caused the serial number to erase from the specs.
As for the last picture I put, I just noticed that there was something there...then I thought to myself that's where the badge would be.
I've been looking all over in Google for my model and where the serial number should be, but can't seem to find it...
I guess I'll deal with it as is...
Only weird thing is, that if it were "stolen," then why have I been able to update the software from Apple without any issues?

I am using a MacBook Pro. I simply cannot find a way to attach images adjusted in Lightroom as attachments and/or without massive degradation in quality. I follow the LR attach email process as specified by LR, the photos appear in the email seemingly e

I am using a MacBook Pro. I simply cannot find a way to attach images adjusted in Lightroom as attachments and/or without massive degradation in quality. I follow the LR attach email process as specified by LR, the photos appear in the email seemingly embedded and the recipients of the email cannot save the attachment.

You are welcome. Just finished a chat session with an Apple support rep and confirmed the matte option no longer available. Seems lots has changed since I bought my 17” 19 months back:). They did say that there were after market screen films available from places like amazon
Have never used anything like that though. My wife has a 2008 MBP 15” with gloss and I can say it is a nice screen finish, you just have to be careful of lighting from behind you. All my iMacs were glossy and I did learn to compensate for the added brilliance the screen brought to the photos. The new soft proofing feature of LR5 seems to better estimate the level of brightness of the printed work, compared to past versions of the s/ware.
In any case, in my opinion you really can’t go wrong with the apple product. I bought my first iMac in mid 1999 and have never looked back. I donated that machine to a pre-school in 2008, it was running OSX version 2 or 3 I think. I did run Photoshop 7.0 on an IBM laptop for a time (windows XP). I think I had one of the very first versions of Adobe Camera Raw on that machine. I digress, sorry.
The chat representative did confirm that the 17” is out of production and I’m guessing Apple found the market for the big laptop just wasn’t there. They did mention that 17” MBP’s show up as “certified refurbished” units from time to time. Suggest you might explore that option with a local Apple store in the UK, assuming Apple has store front operations off this continent of course.
Please feel free to contact me with further questions if you wish.
Take care, Gordy

What causes JBO-33001: Cannot find the configuration file /common/bc4j.xcfg

I know that the jbo exception message:
JBO-33001: Cannot find the configuration file /common/bc4j.xcfg
can be caused by several things including the file really not being there. But in my current case, I know it is there and can be found throgh the classpath, because I actually find it using Configuration.buildConfigurationFileNameFromClassPath and
Configuration.getConfiguration just before calling Configuration.createRootApplicationModule. Is there any way to turn on a diagnostic to find out what is really wrong?
I would also like to request an enhancement to give meaningful messages in the jbo exception.
Roger

This is on jdev 903 with patch running a local application attempting to connect to standalone OC4J 903. I think the error occurs before there is ever any attempt to make the connection to OC4J. Having one big catch-all exception for everything that can go wrong in creating the AM is pretty poor. I know in the past I have done manual editing of bc4j.xcfg and XML sentax errors cause exactly the same exception as not having the file at all. That is why I would at least like a list of all the causes behind the exception so I can go through and check them all.
Thanks,
Roger

Flash CS6 AIR error: CreateWinProcess failed with error 2. The system cannot find the file specified

I created an AIR application in Adobe Flash CS6, but when I test, debug or publish it, an error always occured.
CreateWinProcess failed with error 2. The system cannot find the file specified.
When I clicked OK, Flash suddenly stops responding, so I need to end the process using Task Manager.
I created a blank FLA document and tested and published it, everything's fine there. It was exported properly. But when I do it with the AIR app, Flash can't even start exporting the SWF of the AIP app, and instead gave me the error.
I speculate that there is something wrong with the Java command line stuff Flash is doing behind the curtain. I tried using ADL myself and get the AIR app working fine.
I also found out that Flash has its own JRE installed, so I don't have to bother the JRE used by my computer.
Is there any way to fix this? Thanks in advance. Have a nice day!

I installed the update, but I'm sorry to say that it did not solve the problem
The error is still there as described by Master §ix and Daniel777
CreateWinProcess failed with error 2. The system cannot find the file specified.
It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
In this case, I can't use the simulator to test the applications,
thanks

Compile Error: ld: cannot find -lgcc C compiler cannot create execut

I've just get my system change to arch64 from arch32.
When I try to build wine. It shows:
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
make: *** No rule to make target `depend'. Stop.
==> ERROR: Build Failed. Aborting...
and see this part of config.log
gcc: '-V' must come at the start of the command line
configure:2366: $? = 1
configure:2389: checking for C compiler default output file name
configure:2416: gcc -m32 -march=x86-64 -O2 -pipe conftest.c >&5
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/./libgcc.a when searching for -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/./libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
collect2: ld returned 1 exit status
configure:2419: $? = 1
configure:2457: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "Wine"
| #define PACKAGE_TARNAME "wine"
| #define PACKAGE_VERSION "0.9.22"
| #define PACKAGE_STRING "Wine 0.9.22"
| #define PACKAGE_BUGREPORT "[email protected]"
| /* end confdefs.h. */
|
| int
| main ()
| {
I run "ld -lgcc"
[root@sgu wine0922]# ld -lgcc
ld: cannot find -lgcc
When i was building another package, i get this err info:
conftest.cc:14:28: error: ac_nonexistent.h: No such file or directory

wine needs a 32bit environment to run/get compiled or a multilib x86_64 system. watch the gcc -m32 call - so no way without touching the pure 64bit philosophy behind arch64!

Cannot find Data Neighborhood in NI-DAQmx Base to create a Task

I cannot find Data Neighborhood in NI-DAQmx Base inorder to create a Task.
I am trying to follow the "Learning with LabVIEW 8" tutorial book.
I am using a NI USB-6008, and have downloaded NI-DAQmx Base 3.0.
The book says to right click on Data Neighborhood and "Create New". I cannot find Data Neighborhood anywhere. The help documents referance Data Neighborhood but I still can not find it. Is Data Neighborhood not in the base version?
Please Help Thank you

Hi Lazysmartperson,
DAQmx base uses a different utility to create tasks. This is called the NI DAQmx Base Configuration Utility. It can be found in Windows by going to Start » Programs » National Instruments » NI-DAQmx Base » Utilities » C Interface. The reason behind this is because NI DAQmx Base is typically used on non windows operating systems such as Linux, Mac OSX, and some RT systems. Since there is no Measurement and Automation Explorer (MAX) for these operating systems we use a different utility for customers to configure tasks. If there is no specific reason you cannot use DAQmx, I would highly recommend switching to it. Our DAQmx driver is fully supported within MAX and should show up as in Matthew's last post. If you are looking to develop in DAQmx Base so that the applications can be used later on Linux, Mac, or other DAQmx base supported operating systems, I would suggest taking a look at the DAQmx Base Configuration Utility.
I hope this helps,
Paul C.

How do I uninstall firefox when I cannot find it in 'add/remove program'

I am trying to uninstall firefox from my window 7 notebook but I cannot find it under 'add/remove program' in control panel. I have come across suggestion to delete the Mozilla firefox folder from program x86 but I worry that this method may create problem by leaving orphans in the registry.

The uninstall instructions are here
* [[Uninstall Firefox from your computer]]
You appear not to be posting from Firefox and so I wonder have you already uninstalled it ?
Uninstalling, gives you an option to leave behind personal information. If you will never use Firefox again you may not need that and the Firefox profile may be deleted. Possibly the profile folder is what you are seeing. Note the profile contains your Firefox bookmarks and normally if uninstalling Firefox you may wish to first of all export those as HTML that may be used elsewhere as bookmarks / favourites.
* [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]

X300: bluetooth blue on taskbar but cannot find any device (stack error)

Hello, most likely after installing SP3 or the latest Access connections file, 7xcx23ww.exe, I am unable to connect to any bluetooth device.
the latest Bluetooth with Enhanced data rate software for xp 5.5.0.6400 has been applied, as well as Microsoft Bluetooth Support file for Bluetooth with Enhanced Data Rate for Windows XP, ver 2.0 .
Is there something i am missing here? The task bar shows the Bluetooth icon in blue, but it cannot find any local bluetooth device.
Clifford

Apple claims the iphone supports bluetooth tethering for the hotspot, did I recieve some incorrect information? Also the hotspot is less than ideal. It rarely appears on my 2011 macbook or my wife's iphone. Any help with this stuff other than Apple is behind the 8 ball

Can someone please tell me how to extend a piece of music I have created in garageband, I cannot find anything in the help topics and i am new to the system.

Can someone please tell me how to extend a piece of music that I have created in garageband. I am new to the system and cannot find any info in the help topics. The music is currently only 1 minute and I need it to be 1.39sec to fit in with the film it will be used with in iMovie. Thanks.

Yes, it helps.
You are using a version of the newest GarageBand 10.0, and not GarageBand '11 as in your original post. And I was sending you screenshots from GarageBand '11, LOL!
In GarageBand 10.0 is the end-of-song marker hiding behind the zoom controls. Zoom out as far as possible by shifting the zoom scrollbar to the left. Then you should be able to see a corner of the end-of-song marker peeping out behind the zoom control. Try to grab it with the mouse pointer and shift it to the time you want.

Getting Error: javax.servlet.ServletException: Cannot find ActionMappings o

type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Cannot find ActionMappings or ActionFormBeans collection
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:848)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:781)
     org.apache.jsp.index_jsp._jspService(org.apache.jsp.index_jsp:88)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
javax.servlet.jsp.JspException: Cannot find ActionMappings or ActionFormBeans collection
     org.apache.struts.taglib.html.FormTag.lookup(FormTag.java:711)
     org.apache.struts.taglib.html.FormTag.doStartTag(FormTag.java:419)
     org.apache.jsp.index_jsp._jspx_meth_html_form_0(org.apache.jsp.index_jsp:139)
     org.apache.jsp.index_jsp._jspx_meth_html_html_0(org.apache.jsp.index_jsp:114)
     org.apache.jsp.index_jsp._jspService(org.apache.jsp.index_jsp:81)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.9 logs.
This is my web.xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app     PUBLIC "-//SUN Microsystem, //"
     "http://java.sun.com/j2ee/dtds/web-app_2.2/dtd">
<web-app>
     
     <servlet>
          <servlet-name>action</servlet-name>
          <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          
          <init-param>
               <param-name>application</param-name>
               <param-value>ApplicationResources</param-value>
          </init-param>
          
          <init-param>
               <param-name>config</param-name>
               <param-value>/WEB-INF/struts-config.xml</param-value>
          </init-param>
          
          <init-param>
               <param-name>debug</param-name>
               <param-value>2</param-value>
          </init-param>
          <load-on-startup>2</load-on-startup>
     </servlet>
     
     <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.do</url-pattern>
     </servlet-mapping>
     
     <welcome-file-list>
          <welcome-file>index.jsp</welcome-file>
     </welcome-file-list>
     
     <taglib>
          <taglib-uri>/WEB-INF/app.tld</taglib-uri>
          <taglib-location>/WEB-INF/app.tld</taglib-location>
     </taglib>
     
     <taglib>
          <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
     </taglib>
     <taglib>
          <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
     </taglib>
</web-app>
==================================================================================================================
This is my Struts-config.xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE struts-config     PUBLIC "-//SUN Microsystem, //"
     "http://java.sun.com/j2ee/dtds/struts-config_1_0/dtd">
<struts-config>
     <form-beans>
          
          <form-bean name="loginForm"     type="LoginForm" />
     </form-beans>
     <global-forwards>
          <forward name="mainmenu"      path="/mainmenu.jsp" />
     </global-forwards>
     <action-mappings>
          
          <action      path="/login"     type="LoginAction"
                    name="loginForm"     scope="session"          input="/index.jsp">
          </action>
     </action-mappings>
     </struts-config>
==================================================================================================================
This is my LoginForm.java file
package src;
import org.apache.struts.action.ActionForm;
public class LoginForm extends ActionForm {
     private String login;
     private String password;
     public String getLogin() {
          return login;
     public void setLogin(String login) {
          this.login = login;
     public String getPassword() {
          return password;
     public void setPassword(String password) {
          this.password = password;
==================================================================================================================
This is my LoginAction.java file
package src;
import java.io.IOException;
import javax.servlet.*;
import javax.servlet.http.*;
import org.apache.struts.action.*;
import org.apache.struts.action.Action;
public class LoginAction extends Action {
     public ActionForward execute( ActionMapping mapping, ActionForm form,
               HttpServletRequest request, HttpServletResponse response)
               throws IOException, ServletException
          return (mapping.findForward("mainmenu"));
==================================================================================================================
This is my index.jsp file
<%@ page language ="java" %>
<%@ taglib uri ="/WEB-INF/struts-bean.tld" prefix="bean" %>
<%@ taglib uri ="/WEB-INF/struts-html.tld" prefix="html" %>
<%@ taglib uri ="/WEB-INF/struts-logic.tld" prefix="logic" %>
<html:html>
<head>
     <title> My First Struts Application! </title>
</head>
<body>
     <html:form action="/login">
          LOGIN : <html:text property="login" />
          PASSWORD : <html:password property="password" />
          <html:submit> Login </html:submit>
          <html:reset> Reset </html:reset>
     </html:form>
</body>
</html:html>
==================================================================================================================
and finally This is my mainmenu.jsp file
<%@ page language="java" %>
<%@ taglib uri="/WEB-INF/struts-bean.tld"      prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html.tld"      prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic.tld"      prefix="logic" %>
<html:html>
<head>
     <title>Main Menu</title>
</head>
<body>
     This is the MainMenu !
</body>
</html:html>
==================================================================================================================
Kindly solve my problem........
try to run on your machine...........
I am using Tomcat 5.5.9 and my Project name is MyAppli

Hey guys,
Even I was frustrated for a long time with all the Struts errors for which Google returned loads of results but no particular solutions. All these solutions were all based on hit and trial and only work on some cases. Let me tell you that Struts (and most other frameworks) have a general approach to consume the actual error message and throw an exception which is light years away from the actual cause. So whats' the solution?
Enable logging.... LOG4J to be precise...
...and see that it (log4j) is configured properly. You will see the actual cause there and not on the consoles of your servers (whichever you use).
In my case, it was a host not found exception in the logs because I was sitting behind a firewall and the validator could not locate struts.apache.org
(Wish this thread had some duke dollars)
Regards,
The Correspondent
http://www.araneidae.org

Cannot find image

I just cannot figure out the logic behind this all. Sometimes I can find and import an image from C and it is stored in Library. Mostly they are not. More often they just seam to end up in the there randomly. Is there a procedure after development? Sometimes when I try to import it appeares to be impossible as i get this reply "This photo is a suspected duplicate". As I cannot find the duplicate anywhere, it cannot be used in LR. Where can I find an explanation to this logic which to me at this point seams a bit mysterious and complicated?
Thanks

skippe wrote:
There used to be a dialog that I could access to customize trace settings, but I can't find that any more.
Image trace is a panel. Go to Windows>Image Trace.
Are you migrating from some older illustrator version to CC ?

My itunes wont open and i cannot find an itunes .exe file

my itunes wont open and i cannot find an itunes .exe file

I have this same problem and when I go to the control panel to uninstall itunes, I can't do that either. I have been trying to uninstall so I can reinstall. Hopefully someone has an idea.

Cannot Find "BEFSR41" Behind "WET610N"

Similar Messages

Maybe you are looking for