Cannot get Mail to work with BT
I have suddenly encountered a problem with Mail. I cannot now get it to work with my BT account.
When I Get Mail the progress bar shows from 7 to 15 items for download. The download speed decays to zero the progress bar stalls and nothing arrives.
My .Mac mail is fine though. So I have attempted to get BT to forward my mail to .Mac having deleted the BT account in Mail, but as yet no sign of that work-around helping either.
Is there a bug somewhere? Have had no problem with Mail for years and years.
17 inch iMac and fully up to date.
It may be frustrating, but there's a reason it's doing that; we just need to figure out why. So, what kind of email account do you have, and how long have you had it? When did this problem start, and what did you install just prior to this happening, if anything?
Mulder
Similar Messages
-
Cannot get mail to work with my account
Every time I try to use mail I get a box which reads " Enter Password for Account "smtp.mac.com:myname" The SMTP server "smtp.mac.com" rejected the password for user "myname" please re-enter your password or cancel.
I AM PUTTING THE RIGHT PASSWORD IN!!!!!!!! I've checked it against the mail account preferences, both in the incoming mail server password and on the Outgoing Mail Server SMTP server settings. This message just keeps appearing and rejects my correct password (and caps lock isn't on!).
THIS IS DRIVING ME INSANE!It may be frustrating, but there's a reason it's doing that; we just need to figure out why. So, what kind of email account do you have, and how long have you had it? When did this problem start, and what did you install just prior to this happening, if anything?
Mulder -
The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!
As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian -
Cannot get mail, was working fine for over a year
I have used yahoo mail on iphone5c for over a year. Three days ago I stopped receiving mail and pop up Cannot Get Mail. I have deleted the account and added the account as instructed by Apple's and Yahoo's advise numerous times and it still doesn't work. Anyone else having this issue or know of a fix? Thanks and GOD bless!!!
Yahoo email is notoriously bad, you can do a search and see all the threads about yahoo email account.
Try using the yahoo app for emails. -
Can't get mail to work with SSL certificates
I'm setting up a 10.5.3 mail server and wanted to enable SSL for SMTP and IMAP.
It all works fine if I use the Default certificate that the server generates automatically. But if I want to generate a new certificate with a pass phrase it stops working.
You start seeing errors like the in the system log:
May 30 18:29:19 megalon postfix/smtpd[1143]: warning: cannot get private key from file /etc/certificates/myserver.mydomain.com.key
May 30 18:29:19 megalon postfix/smtpd[1143]: warning: TLS library problem: 1143:error:0906406D:PEM routines:DEF_CALLBACK:problems getting password:pem_lib.c:105:
May 30 18:29:19 megalon postfix/smtpd[1143]: warning: TLS library problem: 1143:error:0906A068:PEM routines:PEMdoheader:bad password read:pem_lib.c:401:
May 30 18:29:19 megalon postfix/smtpd[1143]: warning: TLS library problem: 1143:error:140B0009:SSL routines:SSLCTX_use_PrivateKeyfile:PEM lib:ssl_rsa.c:709:
May 30 18:29:19 megalon postfix/smtpd[1147]: warning: cannot get private key from file /etc/certificates/myserver.mydomain.com.key
May 30 18:29:19 megalon postfix/smtpd[1147]: warning: TLS library problem: 1147:error:0906406D:PEM routines:DEF_CALLBACK:problems getting password:pem_lib.c:105:
May 30 18:29:19 megalon postfix/smtpd[1147]: warning: TLS library problem: 1147:error:0906A068:PEM routines:PEMdoheader:bad password read:pem_lib.c:401:
May 30 18:29:19 megalon postfix/smtpd[1147]: warning: TLS library problem: 1147:error:140B0009:SSL routines:SSLCTX_use_PrivateKeyfile:PEM lib:ssl_rsa.c:709:
Anyone know how to fix this?I still think there's something wrong with Server Admin in 10.5 that's stopping this from working.
I've checked the certificate I'm using on my 10.4.11 mail server and it's key file is encrypted but SMTP mail works fine over SSL. I imported the certificate using Server Admin, I didn't edit the config file manually.
How would the system be decrypting the key before postfix uses it in 10.4? Any why doesn't this work in 10.5? -
Cannot get printer to work with iMac
I cannot get my Epson printer to work with my iMac , It just keeps saying it cannot find printer.
All the other settings are correct , its just the server that fails. I have downloaded printer files ,
sometimes it does recongise it and works, then it stops, I have tried downloading the program again but it makes no difference.
Need to use printer and scanner for my job, and this is driving me mad!!It sounds like BT's hardware may have a firewall that's blocking more than it should.
http://support.apple.com/kb/HT3669
is the printer/scanner listing from Apple.
Use this link: http://support.apple.com/kb/dl1398 to get the latest Epson drivers if your printer/scanner is compatible.
If it isn't, here are some alternatives from my macmaps page:
Epson, alternate Australian site may have more up-to-date drivers for Epson, Epson RIP and colormatching drivers from iProof Systems, Guten-Print (formerly known as Gimp-print), and Printfab. http://www.linuxprinting.org/macosx/ -
Cannot get HDR to work with files from Canon 40D
Hello,
I have read various tutorials and the forum and there seem to be a number of things that have to be just right to get the Automate Merge to HDR Pro to work.
I obtain the images on a tripod using a timer and auto expose a stop bracket. I understand white balance setting may be a problem...
But no matter what I do I get a merged file with very bight colors essentially all over.
I have trief JPEG and TIFF conversions from RAW.
Any ideas/checklist? THis is CS5, completely updated.
ThanksIt sounds like BT's hardware may have a firewall that's blocking more than it should.
http://support.apple.com/kb/HT3669
is the printer/scanner listing from Apple.
Use this link: http://support.apple.com/kb/dl1398 to get the latest Epson drivers if your printer/scanner is compatible.
If it isn't, here are some alternatives from my macmaps page:
Epson, alternate Australian site may have more up-to-date drivers for Epson, Epson RIP and colormatching drivers from iProof Systems, Guten-Print (formerly known as Gimp-print), and Printfab. http://www.linuxprinting.org/macosx/ -
Cannot get ODBC to work with Instant Client
Hi,
I am having problems getting ODBC working with instant client. This is what I have done so far:
1. I installed Instant Client from this page: http://www.oracle.com/technetwork/topics/winsoft-085727.html
The file I downloaded was: instantclient-basic-win32-10.2.0.3-20061115.zip
2. Next, I installed SQL*Plus with this file: instantclient-sqlplus-win32-10.2.0.3-20061115.zip
Now I have SQL*Plus working with instant client.
3. After that I downloaded instantclient-odbc-win32-10.2.0.3-20061115.zip for ODBC.
4. I unzipped the odbc zip file into the Instant Client folder and ran odbc_install.exe. Now I have 'Oracle in instantclient 10_2' showing up in the drivers tab of ODBC Data Source Administrator.
5. Now, if I try to add add a DSN and choose 'Oracle in instantclient 10_2' as the data source, I get an error "ODBC Administrator has stopped working" (http://i50.tinypic.com/jifl2g.png)
I can add DSNs using any other data source without problems. The aforementioned error comes up only when I use 'Oracle in instantclient 10_2' as the data source.
Can someone please let me know how to resolve this?
I am running Windows Vista Business edition 32-bit.
Thanks & Regards,
Ubaidullah Nubar.
Edited by: unubar on Dec 17, 2012 9:42 PMTwo dimensions of compatibility/requirements:
Vertically - This is your application, APIs, .Net, operating system etc. that may define requirements on Oracle Client version, and vice versa.
Horisontally - "on the wire" or connectivity wise - Oracle certifies client - server interoperability at least two releases or major versions back/apart, so yes, 10.2 is/was* supported. See MOS interoperability matrix for your specific case.
(*was since 10.2 Database is out of support or even Extended support by now. Perhaps it is time to upgrade the server side also ;-)) -
Cannot get mail message only with hotmail
every time I try to read my hotmail i receive this message, everything was working perfectly until a month ago and then I stop receiving push notifications, and isn't syncing with hotmail server
anyone knows any solution to this problem. I even restore my iPhone 4 but it still not working only works with my gmail accountUnless you are accessing your Hotmail account as an Exchange account with the iPhone's Mail app, you've never had Push notifications with your Hotmail account nor synced the account with the Hotmail server. Push access for received messages and syncing server stored mailboxes with the server is supported when accessing the account as an Exchange account only.
Email account settings are included with your iPhone's backup. If there is a problem with the account settings on your iPhone and/or with your iPhone's backup in regards to this particular data, restoring your iPhone with iTunes from your iPhone's backup will also restore the problem putting you right back where you started.
Have you tried deleting and manually recreating the account on your iPhone? -
Cannot get attachments to work with gmx mail
Since the update, my gmx mail account will not allow me to upload attachments from my computor
Are you trying to set it up using IMAP, and did you enable IMAP in your webmail gmail settings?
Matt -
A tip on how to get mail to work with O2 SMTP servers.
I found I had a problem in Mountain Lion where Mail could not log into the O2 SMTP servers even though I was using the exact same settings that were on my iPhone, iPad and MBP running Lion?
Well I finally found a solution.
In Mail open preferences and click on Accounts and select the account in the lefthand pane.
Click on the Outgoing Mail Server (SMTP) and in the drop down menu select Edit SMTP Servers to get:
Normally the radio button against Use Default Ports would be checked, instead check Use Custom Port and insert the number 25 and click OK.
Now back at the Accounts window click on Advanced at the top to get:
Make sure you have Port 110, on mine changing the SMPT to 25 also altered this to 25 so worth checking. When you have finished close the preferences and click on save, quite Mail then restart hopefully all should work now.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I cannot get anything to work with the iPhone Configuration Utility
I have to set up 30 ipad 2's with restrictions set on them for the students...i created the configuration profile and click install and nothing happens...i have been to the extensive (two article) help tutorial...i have done everything it says to do...i cannot email the config to them because we don't want them using email...so not wanting to set up 30 ipads with an email addy...was wondering if there was another program with better tech support articles and is easy to set up and use...this is kinda useless...
Jaheedi, it sounds like you've tried a lot to make this work....my experience has been that in mlost cases if a profile fails to install it is usually due to a required payload not having been configured. It can happen if a payload category gets opened(General for example) inadvertently and then payloads within that category are not completed.(Identifier for example), then the profile will fail to install. Also, I've only got it to reliably work over a USB connection ( we use encrypted profiles with a "with authentication" removal option).....you might try installing a very basic profile with just the General Payload category expanded ( and required payloads completed) and see if that works..if that works, it probably is one of the other categories is incomplete. If you haven't tried the above, I hope this helps a bit.
-
Cannot get KeyListener to work with JAI ScrollImagePanel
I am trying to display a TIF image and use the page up and page down keys to show page 1 and page 2 of the image. I started with an example for the JAI documentation.
The problem is that I can't get the key event listener to "see" keystokes.
I think ScrollImagePanel() is doing its own event listening and I don't know how to get at it.
Here is the code:
// http://java.sun.com/products/java-media/jai/forDevelopers/samples/MultiPageRead.java
A single page of a multi-page TIFF file may loaded most easily by using the page
parameter with the "TIFF" operator which is documented in the class comments of
javax.media.jai.operator.TIFFDescriptor. This example shows a
means of loading a single page of a multi-page TIFF file using the ancillary codec
classes directly.
import java.awt.*;
import java.awt.event.*;
import java.io.File;
import java.io.IOException;
import java.awt.image.RenderedImage;
import java.awt.image.renderable.ParameterBlock;
import javax.media.jai.*;
import javax.media.jai.widget.*;
import com.sun.media.jai.codec.*;
public class MultiPageRead4 extends Frame
implements KeyListener { //1
ScrollingImagePanel panel;
File file = null;
ImageDecoder dec = null;
RenderedImage op = null;
// side to load, 0=front and 1=back
static int imageToLoad = 0;
/** The key code to flip between back and front images */
private static final int FLIP_IMAGE_KEY1 = KeyEvent.VK_PAGE_UP;
private static final int FLIP_IMAGE_KEY2 = KeyEvent.VK_PAGE_DOWN;
/** Short cut key to exit the application */
private static final int EXIT_KEY = KeyEvent.VK_ESCAPE;
public MultiPageRead4(String filename) throws IOException { //2
super("Multi page TIFF Reader");
// won't work here either
// addKeyListener(this);
addWindowListener(new WindowAdapter() { //3
public void windowClosing(WindowEvent we) { //4
System.exit(0);
} //4
}); //3
if(file == null) { //3
file = new File(filename);
SeekableStream s = new FileSeekableStream(file);
TIFFDecodeParam param = null;
dec = ImageCodec.createImageDecoder("tiff", s, param);
System.out.println("Number of images in this TIFF: " +
dec.getNumPages());
// Which of the multiple images in the TIFF file do we want to load
// 0 refers to the first, 1 to the second and so on.
// int imageToLoad = 1;
} //3
// display side of tiff indicated by imageToLoad which is initialized to 0
// and set by page up / page down
displaySide();
} //2
// Methods required by the KeyListener interface.
* Process a key being pressed. Does nothing as we wait for the
* release before moving.
* @param evt The event that caused this method to be called
public void keyPressed(KeyEvent evt)
System.out.println("Key pressed."); // debug -- see if it works
// do nothing
* Process a key being type (press and release). Does nothing as this is
* always dodgy about when we get the event. Better to look for the
* release.
* @param evt The event that caused this method to be called
public void keyTyped(KeyEvent evt)
System.out.println("Key typed."); // debug -- see if it works
// do nothing
* Process a key being pressed. Does nothing as we wait for the
* release before moving.
* @param evt The event that caused this method to be called
public void keyReleased(KeyEvent evt)
{ //2
System.out.println("Key released."); // debug -- see if it works
switch(evt.getKeyCode())
{ //3
case EXIT_KEY:
System.exit(0);
break;
case FLIP_IMAGE_KEY1:
if(imageToLoad == 1) { //4
imageToLoad = 0;
displaySide();
break;
} //4
case FLIP_IMAGE_KEY2:
if(imageToLoad == 0) { //4
imageToLoad = 1;
displaySide();
break;
} //4
} //3
} //2
public void displaySide() { //2
try {
op = new NullOpImage(dec.decodeAsRenderedImage(imageToLoad),
null,
OpImage.OP_IO_BOUND,
null);
} catch (java.io.IOException ioe) {
System.out.println(ioe);
* Create a standard bilinear interpolation object to be
* used with the �scale� operator.
Interpolation interp = Interpolation.getInstance(
Interpolation.INTERP_BILINEAR);
* Stores the required input source and parameters in a
* ParameterBlock to be sent to the operation registry,
* and eventually to the �scale� operator.
ParameterBlock params = new ParameterBlock();
// params.addSource(image1);
params.addSource(op);
params.add(0.70F); // x scale factor
params.add(0.70F); // y scale factor
params.add(0.0F); // x translate
params.add(0.0F); // y translate
params.add(interp); // interpolation method
/* Create an operator to scale image1. */
RenderedOp image2 = JAI.create("scale", params);
/* Get the width and height of image2 + 3% */
int width = (int)(image2.getWidth() * 1.03);
int height = (int)(image2.getHeight() * 1.03);
/* Attach image2 to a scrolling panel to be displayed. */
panel = new ScrollingImagePanel(
image2, width, height);
panel.addKeyListener(this);
// Display the original in a 800x800 scrolling window
// panel = new ScrollingImagePanel(op, 1000, 600);
add(panel);
pack();
show();
//2
public static void main(String [] args) {
String filename = "034363331.TIF";
try {
MultiPageRead4 window = new MultiPageRead4(filename);
} catch (java.io.IOException ioe) {
System.out.println(ioe);
System.out.println("finished.");
// http://java.sun.com/products/java-media/jai/forDevelopers/samples/MultiPageRead.javaI can't get the KeyListener to act (or send the debug messages to System.out.println()).
If "add( panel );" is removed and the comment before " keyListener(this); " in the constructor the key listening logic works -- of course no image is displayed.
Thanks for any help.
Bill BlalockThanks for exanding your explanation. I am not yet skilled enough in Java to follow you completely but I am getting the idea.
I would appreciate a code snippet using my example so I can better understand. In the mean time I found one way to make it work.
In the example I eventually found that this change ..
show();
panel.requestFocus();enabled the key listener. Bringing the window, even clicking on the panel, didn't give it focus. I understand that the window has to have the focus in order for the key listener to function (different from the mouse listender). I don't understand why the application did not have "focus" even though it was on top and active.
Oh well, lots to learn.
Thanks for your suggestion! -
Cannot get "passwd" to work with pam_winbind (Active Directory/Samba)
I've have a Samba Active Directory server and AD users can log in to linux boxes. I'd like them to be able to change their passwords from Linux.
I've set up winbind and PAM and users can log in fine. However, users cannot change passwords.
I used the PAM configuration as per the wiki, although I note that /etc/pam.d/passwd doesn't include the "system-auth" file that the Wiki instructions describe. I can either paste the "password" entries into /etc/pam.d/passwd or modify it to include "system-auth". I've tried both ways without any luck. Here is the PAM config I have (from the Wiki instructions):
password [success=1 default=ignore] pam_localuser.so
password [success=2 default=die] pam_winbind.so
password [success=1 default=die] pam_unix.so sha512 shadow
password requisite pam_deny.so
password optional pam_permit.so
and here is a typical session
$ passwd
Changing password for MYDOMAIN\myuser
(current) NT password:
Enter new NT password:
Retype new NT password:
passwd: Authentication failure
passwd: password unchanged
and the journal (I enabled debug in the above config)
Mar 02 13:59:48 tsodium passwd[981]: pam_winbind(passwd:chauthtok): [pamh: 0x9c1fe98] ENTER: pam_sm_chauthtok (flags: 0x4000)
Mar 02 13:59:48 tsodium passwd[981]: pam_winbind(passwd:chauthtok): username [MYDOMAIN\myuser] obtained
Mar 02 13:59:48 tsodium passwd[981]: pam_winbind(passwd:chauthtok): getting password (0x00000021)
Mar 02 13:59:51 tsodium passwd[981]: pam_winbind(passwd:chauthtok): request wbcLogonUser succeeded
Mar 02 13:59:51 tsodium passwd[981]: pam_winbind(passwd:chauthtok): user 'MYDOMAIN\myuser' granted access
Mar 02 13:59:51 tsodium passwd[981]: pam_winbind(passwd:chauthtok): [pamh: 0x9c1fe98] LEAVE: pam_sm_chauthtok returning 0 (PAM_SUCCESS)
Mar 02 13:59:51 tsodium passwd[981]: pam_winbind(passwd:chauthtok): [pamh: 0x9c1fe98] ENTER: pam_sm_chauthtok (flags: 0x2000)
Mar 02 13:59:51 tsodium passwd[981]: pam_winbind(passwd:chauthtok): username [MYDOMAIN\myuser] obtained
Mar 02 13:59:51 tsodium passwd[981]: pam_winbind(passwd:chauthtok): getting password (0x00000001)
Mar 02 13:59:58 tsodium passwd[981]: pam_winbind(passwd:chauthtok): user 'MYDOMAIN\myuser' denied access (incorrect password or invalid membership)
Mar 02 13:59:58 tsodium passwd[981]: pam_winbind(passwd:chauthtok): [pamh: 0x9c1fe98] LEAVE: pam_sm_chauthtok returning 7 (PAM_AUTH_ERR)
I've done a bit of searching and have seen others reporting the same "incorrect password or invalid membership" but nothing concreate on how this should be configured. So I'd really appreciate anyone who can share a working configuration...Hello,
We are getting the same message output: "com.sco.tta.common.asadutils", but ours say: "com.sco.tta.common.asadutils.ExpiredEvaluationException: ErrEvalExpired\Session failed: Command execution failed"
Does anyone know where can I get info about this output?
cs0aluc, how did you get your error fixed?
Thanks in advance. -
Cannot get VPN to work with new WRT400N router - wired works
After successfully using VPN with my WRT45G v3 wireless router for years the internet connection suddenly quit working. Called Linksys and they suggested buying support or getting a new router. I bought a WRT400n dual band router.
I have a work laptop that is Windows XP and a personal laptop that is Vista. The wireless network is up and running; both laptops can connect to the internet. The problem is when I try to use my work laptop and VPN to the company network the internet connection on that loptop drops and I have to reboot to reconnect. If I use the ethernet port on the router the VPN works fine.
I can use a limited access version of the VPN software on my personal laptop with no issues (limited due to security restrictions).
I have called linksys support, my ISP support, and company support. My company support suggest that it is a security setting on the Linksys wireless network.
Has anyone run into similar issues? The VPN software is by Juniper Networks - Network Connect 6.4.0.Make sure all the Ports required for your VPN software are forwarded on your router...Try to reduce the Security to WEP on your Linksys router...
Also change the MTU Size to 1300 and see if you are able to connect to your VPN...
If nothing works you should reset and then re-configure your router...
Maybe you are looking for
-
Hello all, I have a client that needs 2 levels of approval for travel expenses (request for travel- TRIP and travel expenses- specification of travel expenses- PR05). In order to do that we need to expand table in travel request and PTRV_HEAD (TRIP)
-
Java scripting for header,footer and combine PDF as package
Hi All, 1.How to add header and footer using scripting. 2.How can i combine 5 pdf files in to one pdf as PDF file package using Java Scripting. Thanks Mohamed Idris
-
Forcing the browser to display current images
Hi all I have a content manager tool where images are uploaded to a server.On the same screen the current version of the image is displayed When a new version of the image is uploaded and the page is requested again
-
Best way for Crossjoin in MDX query
Hi all, what is the best way for for Cross join in MDX query Regards, Manish
-
Can a job have a start time different from its schedule?
I have a WEEKDAY schedule defined as follows: begin dbms_scheduler.create_schedule ( schedule_name => 'DAILY', repeat_interval => 'FREQ=DAILY; BYDAY=SUN,MON,TUE,WED,THU,FRI,SAT; BYHOUR=0;BYMINUTE=1;BYSECOND=0', comm