Cannot import object from one user to another user

hi,
I tried importing a table which contains objects of type varray. The imp.exe did not import the types and table containing the objects. The table contains data. How to do it. I am using Oracle 8.1.7
Anto Paul

If you want to create that table in one enviroment and the another table is in other database you can make this :
CREATE TABLE TABLE1 AS SELECT * FROM SCHEMA_NAME.TABLE2 ( this case apply if the another table is in your database )
or
CREATE TABLE TABLE1 AS SELECT * FROM SCHEMA_NAME@DATABASE_LINK
( this case apply if the another table is in other database )
[email protected]
Joel P�rez

Similar Messages

Help Importing objects from 1 user to another user and problem with trigger

Hello community, i am having a little difficulty with the exporting objects from one user to another specifically the exporting of the trigger.
Here is the situation, because of SOX purpose whenever a update is sent to the client the dba have to execute the script as himself (priviliged user) and is not allowed to log into the schema to make changes. Therefore we perpend the object definitions with &user_schema.. and they define user_schema in sqlplus and execute the update script.
Here is a small example which requires two users (user1 and user2) with the following grants (connect, create table, create trigger, create view, create sequence). Please forgive the naming of the objects, just trying to be as simple as possible.
I start out by logging in as system user via sqlplus and execute the following.
------------------Begin sqlplus----------------------
define user_schema=user1;
create table &user_schema..abc01 (
col1 number,
col2 varchar2(20),
col3 number,
constraint pk_abc01_col1 primary key (col1)
create table &user_schema..xyz01 (
col1 number,
col2 varchar2(20),
col3 number,
constraint pk_xyz01_col1 primary key (col1)
create or replace view &user_schema..view1 as
select x.col1, x.col2, x.col3, a.col1 as acol1, a.col2 as acol2, a.col3 as acol3
from xyz01 x
inner join abc01 a on a.col1 = x.col1;
create sequence &user_schema..seq_xyz01 start with 1 increment by 1;
create or replace trigger &user_schema..trig01
before insert on &user_schema..xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
/--------------------End sqlplus----------------------
I would then proceed to export using the exp utility via the command line
exp system/systempassword file=user1.dmp owner=user1
Then import user1 objects into user2
imp system/systempassword file=user1.dmp fromuser=user1 touser=user2
Now the problem:
When i take a look at the sql for user2 trigger (trig01) i see the following (viewed via sqldeveloper)
create or replace TRIGGER "USER2".trig01
before insert on user1.xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;its referring to user1.xyz01 table, however i want it to point to is user2.xyz01 table. Can someone please help me out or offer another solution to go about this because i need the ability to import the objects into a different user without the import failing and having to recompile the object.
I've also tried executing this while connected as system user via sqlplus:
define user_schema=user1
create or replace trigger &user_schema..trig01
before insert on xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
/but that fails stating that table or view does not exist, please help
however that fails because i
Edited by: user3868150 on Nov 6, 2009 6:05 PM

When performing an update in their system, the same script will be run with different values, thats not the problem.
The client currently have just that one schema in their environment, however they want to have another instance of the application set up in their environment (same database) and have that go off on its own track separate from the original application.
Now when we do an exp of the schema and the imp it into another user it get imported, however its incorrect. As stated before the trigger will be acting on the table in the original schema when it should be acting on the table in the newly imported schema.
I suppose there is no other way around this when a trigger is created the way in which i outlined above. I guess after the data gets imported into a different user the trigger would have to be recompiled to point to the correct table.
If you have an alternate solution to go about this i am open to suggestions. However like i mentioned in the original post because of SOX purpose the dba is not allowed to log in and execute update scripts as the schema user. The scripts should only be executed as that privileged user (dba).
Also if i hard code the user when the trigger is created
create or replace trigger user1.trig01
before insert on user1.xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
/it still doesn't get imported the way that i want it to be imported in user2
create or replace TRIGGER "USER2".trig01
before insert on user1.xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;now when i do an insert to test
insert into user1.xyz01 (col2, col3) values ('abc', 123); -- Works fine, no problems here
insert into user2.xyz01 (col2, col3) values ('abc', 123);Results in an error ORA-01400: cannot insert NULL into ("USER2".XYZ01"."COL1") because the trigger doesn't exist on user2.xyz01 table.
Just try and create the schema like how i outlined above in your environment to see what i'm talking about. It seems that the only way to get the trigger to be imported the way i want it to is to actually log in as that user and create the trigger.
sqlplus user1/user1
{code}
create or replace trigger trig01
before insert on xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
{code}
Edited by: user3868150 on Nov 6, 2009 6:10 PM

How to move database objects from one user to another user

Could someone help how to move database objects from one user to another user
Thanks in advance

Thanks a lot for the reply.
Actually I wanted to know whether there is any command to change the owner ship of the table.
For ex table1 belongs to user1. can the owner of table1 to be changed to owner2.
directly using an oracle command. I knew that it can be done using import and export, since the table was 200 million thought the rename command would be faster instead of import and export.
Thanks Billy for letting me know that it is not possible using oracle query.

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

Moving object from one client to another using transport requests...

Hi,
If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
Regards,
Rajesh

Hello Rajesh
If the two systems share a common transport directory then you can simply go to transaction STMS, double-click on the import queue (target system), then choose menu Extras -> Other Requests -> Add.
The transport request will be added to the import buffer. Next you can import the request.
If the two systems do not share a common transport directory you can use RFC-enabled function module EPS_FTP_PUT to copy the data and cofile from the source to the target system (check for DIR_TRANS directories using transaction AL11).
Regards
Uwe

Moving Object from One container to another in workOrder Dri

Hi , I am able to Move Object from One container to another container in workOrder Driver.
here is my code which i am using
<do-move-src-object class-name="ValeUser">
<arg-dn>
<token-local-variable name="var-str-nwoContent"/>
</arg-dn>
<arg-dn>
<token-text xml:space="preserve">\</token-text>
<token-global-variable name="dirxml.auto.treename"/>
<token-text xml:space="preserve">\</token-text>
<token-global-variable name="hrfeed.inactive.container"/>
</arg-dn>
</do-move-src-object>
Thanks
Adarsh Kumar

Originally Posted by AndersG
Idmlearner,
> am able to Move Object from One container to another container
> in workOrder Driver.
>
Possibly better asked in support.identity-manager
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms
Identity Manager - NOVELL FORUMS
If you are not a nntp user.
Thomas

Using Command Line to move objects from one environment to another enviroment

Can the Command Line (sacmd) be used to move Job Groups/Jobs and other object from one environment to another environment? If so, how?

Moving jobs and objects can only be accomplished by using the Transporter application. There is a document called "Transporter User Guide" with a chapter called "Running Transporter in Batch Mode" that details how to send commands to transporter from the command line. It also details how to setup jobs in Tidal to use this command line. Once you have jobs in Tidal using the Transporter command line, you can then use sacmd to run these jobs.
Does this make sense?

How to carry an object from one JSP to another JSP?

How can I carry an object from one JSP to another JSP?
I have a servlet where I am setting an object in request as an attribute and then forwarding to PageA.jsp.
MyDTO myDTO = new MyDTO();
request.setAttribute("MyDTO", myDTO);
RequestDispatcher rd = getServletContext().getRequestDispatcher("/PageA.jsp");
rd.forward(request, response);
I can get MyDTO object in PageA.jsp:
MyDTO myDTO = (MyDTO) request.getAttribute("MyDTO");
Now PageA.jsp has a form named form_pageA which submits to PageB.jsp. How can I make sure that myDTO object is available in PageB.jsp? I would like to not store it in session.
Edited by: srhcan on May 4, 2012 7:52 PM

srhcan wrote:
but its not a text I want to store; instead its a JavaBean object. Thats why I cannot use a hidden text type input field.No, but perhaps you could stick something in there which you can use to reconstruct your DTO object on the next request?

Do I have to be on the internet to import library from one computer to another ?

Do I have to be on the internet to import library from one PC to another ?

What library? Do you mean you iTunes Library? If so, then no, you don't have to be on the Internet. You only have to copy the library to an external disk, then restore it on the other computer.
Back up your iTunes library by copying to an external hard drive
Also, see:
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.

Migrating ODI objects from one environment to another

Hi,
This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
When i choose "Synonym Insert_Update" option to import is prompts error :
You are importing an object from another repository with same identifier. This is forbidden
This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
What should be followed to migrate objects ?

user8628169 wrote:
Hi,
This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
When i choose "Synonym Insert_Update" option to import is prompts error :
You are importing an object from another repository with same identifier. This is forbidden
recreate your OA repository with repository id different from your DEV repository.
Then you should not get this problem.
This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
What should be followed to migrate objects ?

How do I move an object from one photo to another and then change the scene, i.e. winter to sum?

How do I move an object from one photo to another and then change the scene, i.e. winter to summer?

OK.
Open the picture with the new scene. This will be your canvas.
Open the picture with object A, select it with one of the selection tools, go to Edit>copy
Go back to the new scene/canvas, Go to Edit>paste
Repeat for object B
Use the move tool to position A & B, each on its own layer. Use the corner handles of the bounding box to resize, if necessary
You should have 3 layers: Background layer, and the 2 layers with A & B
Note: It's best if the resolution of the 3 picture files is the same value.

Move objects from one tablespace to another

Hello
Running Oracle 10g rel 2 and I would like to move all objects from one tablespace to another. There are Primary Key indexes to other tables in this tablespace. The size grew too large and I want to reduce the size.
Thank you.

Good afternoom Sir!
I believe that below "ask tom - moving tables across tablespaces" may help you.
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:47812348053
Regards,
Marcello M.

Transportation ( how to transport objects from one server to another)

Hi BW guru's
Please tell me the steps to transport objects from one server to another server.

Follow the steps.
1. RSA1 > Transport connection
2. In the right window there is a catagory "all object according to type"
3. Select required object you want to transport.
4. Expand that object , there is select object, double click on this you will get the number of objects, select yours one.
5. Continue.
6. Go with the selection, select all your required objects you want to transport.
7. There is icon Transport Object (Truck Symbol).
8. Click that, it will creat one request, note it down this request.
9. Go to Transport Organiser (T.code SE01).
10. in the display tab, enter the Request, then go with display.
11. Check your transport request whether contains the required objects or not, if not go with edit, if yes "Release" that request.
Thats it, your cordinator will move this request to Quality or Production.
Hope its helps.
Regards

How to transport objects from one server to another server?

How to transport objects from one server to another server.ie..from development to testing sewrver....

Hi Manoj,
Check these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Transporting Objects IR ID using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
You can choose either File transfer methor or CMS. File transfer method is the simplest.
Sachin

Moving field object from one section to another programatically

How do I move text/field objects from one section to another at run time. The ReportObjects collection in the section is readonly and setting the left, top property of the ReportObject only seems to move object within the same section.
I'm using Crystal Reports version 10.5 that comes with VS 2008 professional.
Edited by: iyounus on May 26, 2009 9:41 PM

Hi;
The trial version will offer this capability. You can either use RAS (which is available with Crystal Reports, or Business Objects Enterprise), or the Crystal Reports engine. Which you use will depend on the target for your application, see this for some tips on that:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f006a5e6-7e64-2b10-8a84-8b15ca5cacfc
And, some links to samples that add fields:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20300f17-c566-2b10-b586-b8e8a23e6668
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3085841e-c566-2b10-238c-9f7c3f85d816
https://www.sdn.sap.com/irj/boc/sdklibrary
Regards,
Jonathan

Cannot import object from one user to another user

Similar Messages

Maybe you are looking for