Cannot open application server file even if it exists...

Hello Experts,
I cannot open a file residing in one of the directories in the application server
using command OPEN DATASET. The file is there but OPEN DATASET gives me a value of 8
in SY-SUBRC. Any solutions for this?

ok .. basis need to give u the permission.
Before opening dataset check file authority with FM AUTHORITY_CHECK_DATASET
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
      EXPORTING
        activity         = 'WRITE'
        filename         = filename
      EXCEPTIONS
        no_authority     = 1
        activity_unknown = 2
        OTHERS           = 3.

Similar Messages

Why i cannot open a PDF file even with abobe 9

why i cannot open a PDF file even with abobe 9

Please supply screen shot when it is asking for updates. (Do not send as email, use CAMERA icon). This is important, there are many fake updates.

Cannot open adobe acrobat files even after downloading the reader

I downloaded adobe acrobat rader but am still unable to open a pdf document

Right-click (or Control-click) on a PDF file and select "Open With..." and then select Adobe Reader. Now all PDF files should open in Reader.
Clinton

How to check whether the Application Server file has already been opened?

Hi Experts,
I have a query related to Application Server file. I am using multithreading concept to process the data and write it in to a single file.
For example, I have 4 workprocesses. Each workprocess will process the data and whenever it has a record available it will access the file and write it directly.
Problem is the statements that are written in the workprocess is same and I want to check the status whether the file has been opened or not ?
Thanks in advance!!!
Thanks,
Babu Kilari

Depends on the structure, and whether the data needs to be sorted in some way in the final file.
In any case, I don't think there will be a significant performance difference between using OPEN DATASET again and getting funny with Unix commands.
If you don't need to sort the final file, you can use strings to read, concatenate and write the data even without line-based DO ENDDO loops, this works pretty fast.
I hope we are not talking about GBytes of data
Thomas

Problem in accessing application server file using open dataset

Hi All,
I am trying to access application server file using open dataset command, its working fine for normal path which imention. But when i am giving path of XI server file, its not working. How to access XI server file using open dataset. Please let me know.
Thanks in advance.
Regards,
Vishal

Hi Vishal,
You need to verify if the location where you are trying to save the file is in the same server of SAP. In case that the location is in other server you need to map that directy into the same server of SAP.
You need to point always to a location in the same server of SAP, in order that the open dataset could work.
Regards,
Eric

I cannot open any.exe file in my laptop and not even cmd.

I cannot open any .exe file on my laptop running windows 8.1 pro. When i click on it it asks how do i want to run it. I cant open command prompt, task manager and even registry editor. In the file explorer, when i navigate to any exe file it shows "%1"%*
in the file type column. I think it is a problem with the registry. Please help me.

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

I cannot open applications or jpg files. I get error -10810

I cannot open applications on my iMac snowleopard. Nor jpg files. And who knows what other files. I get error -10810. I repaired permissions when I identified this problem. But that didn't help. What can I do?

Found this article that may be of help...
http://reviews.cnet.com/8301-13727_7-10365239-263.html
Regards,
Rich

Application Server file to internal table

Hi,
How can i read the application server file into the internal table?? Which FM should i use??
Regards,
Kit

Hi,
Open Dataset is used to read or write on to application server ... other than that i am not sure that there exists any way to do the same ... here is a short description for that
FILE HANDLING IN SAP
Introduction
Files on application server are sequential files.
Files on presentation server / workstation are local files.
A sequential file is also called a dataset.
Handling of Sequential file
Three steps are involved in sequential file handling
OPEN
PROCESS
CLOSE
Here processing of file can be READING a file or WRITING on to a file.
OPEN FILE
Before data can be processed, a file needs to be opened.
After processing file is closed.
Syntax:
OPEN DATASET <file name> FOR {OUTPUT/INPUT/APPENDING}
IN {TEXT/BINARY} MODE
This statement returns SY_SUBRC as 0 for successful opening of file or 8, if unsuccessful.
OUTPUT: Opens the file for writing. If the dataset already exists, this will place the cursor at the start of the dataset, the old contents get deleted at the end of the program or when the CLOSE DATASET is encountered.
INPUT: Opens a file for READ and places the cursor at the beginning of the file.
FOR APPENDING: Opens the file for writing and places the cursor at the end of file. If the file does not exist, it is generated.
BINARY MODE: The READ or TRANSFER will be character wise. Each time n characters are READ or transferred. The next READ or TRANSFER will start from the next character position and not on the next line.
IN TEXT MODE: The READ or TRANSFER will start at the beginning of a new line each time. If for READ, the destination is shorter than the source, it gets truncated. If destination is longer, then it is padded with spaces.
Defaults: If nothing is mentioned, then defaults are FOR INPUT and in BINARY MODE.
PROCESS FILE:
Processing a file involves READing the file or Writing on to file TRANSFER.
TRANSFER Statement
Syntax:
TRANSFER <field> TO <file name>.
<Field> can also be a field string / work area / DDIC structure.
Each transfer statement writes a statement to the dataset. In binary mode, it writes the length of the field to the dataset. In text mode, it writes one line to the dataset.
If the file is not already open, TRANSFER tries to OPEN file FOR OUTPUT (IN BINARY MODE) or using the last OPEN DATASET statement for this file.
IF FILE HANDLING, TRANSFER IS THE ONLY STATEMENT WHICH DOES NOT RETURN SY-SUBRC
READ Statement
Syntax:
READ DATASET <file name> INTO <field>.
<Field> can also be a field string / work area / DDIC structure.
Each READ will get one record from the dataset. In binary mode it reads the length of the field and in text mode it reads each line.
CLOSE FILE:
The program will close all sequential files, which are open at the end of the program. However, it is a good programming practice to explicitly close all the datasets that were opened.
Syntax:
CLOSE DATASET <file name>.
SY-SUBRC will be set to 0 or 8 depending on whether the CLOSE is successful or not.
DELETE FILE:
A dataset can be deleted.
Syntax:
DELETE DATASET <file name>.
SY-SUBRC will be set to 0 or 8 depending on whether the DELETE is successful or not.
Pseudo logic for processing the sequential files:
For reading:
Open dataset for input in a particular mode.
Start DO loop.
Read dataset into a field.
If READ is not successful.
Exit the loop.
Endif.
Do relevant processing for that record.
End the do loop.
Close the dataset.
For writing:
Open dataset for output / Appending in a particular mode.
Populate the field that is to be transferred.
TRANSFER the filed to a dataset.
Close the dataset.
chk a sampel
parameters: p_file like rlgrap-filename obligatory
default '/usr/sap/upload.xls'.
types: begin of t_data,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
matnr like vbap-matnr,
werks like vbap-werks,
megne like vbap-zmeng,
end of t_data.
data: it_data type standard table of t_data,
wa_data type t_data.
open dataset p_file for output in text mode encoding default.
if sy-subrc ne 0.
write:/ 'Unable to open file:', p_file.
else.
do.
read dataset p_file into wa_data.
if sy-subrc ne 0.
exit.
else.
append wa_data to it_data.
endif.
enddo.
close dataset p_file.
endif.
And if you want to write on the file.
*--- open UNIX file
open dataset unixfile for output in text mode message w_msg.
if sy-subrc ne 0.
write: / 'Cannot open for writing:', unixfile, w_msg.
exit.
endif.
*--- write UNIX file
loop at it_file.
transfer it_file to unixfile.
endloop.
*--- close UNIX file
close dataset unixfile.

Cannot open SQL Server error on 64 bit Windows 7

I have a client running a Crystal 8.5 report that includes an embedded subreport. The subreport based on a second database is not updating and sometimes the report reports an error "Cannot open SQL Server".
The database is open and available, and the report works on a 32-bit XP machine on the same database with the exact same report on the same network.
The report works on my development machine with the clients database and the exact same report (my system is Windows 7 32-bit) - different office setup.
Because the report only has problems on the 64-bit, I am wondering if there is a pathing problem from the Program files (x86) or some such issue.
I have copied the files in the c:\Windows\Crystal directory to the c:\Windows\system32 directory. I've come across issues with Terminal Services that required this in the past.
If it matters, the main report is based on the MS Text Driver running off csv files and the subreport is based on a MySQL database using the 3.51 ODBC driver.
Does anyone know any issues and/or solutions related to running Crystal/32 bit programs on a 64 bit system?
TIA, rasinc.

CR 8.5 is not supported on 64 bit OS's or ANY Terminal Servers.
The location for 32 bit applications on a 64 bit OS is \windows\syswow64.
Good luck
Don

Suddenly cannot open an image file

PS 7 on a Vista machine with lots of RAM.
All has been working well for months and suddenly I cannot open any image file or start a new one. Tried re-installing from OEM disc and no improvement. Removed PS7 VIA the Windows utility and re-installed entire application from OEM disc with still no improvement.
When I try to open or start a new image the blue bar at the top of PS is illuminated, then I click on FILE and then on either NEW or OPEN. At that point everything stops. The drop down menus are grayed out and I cannot close the program by normal means. In order to close it I have to go to Task Manager and close the thing.
BTW: Sometimes Task Manager shows that the PS EXE application is using 44K and other times it shows about 7K.
Any suggestions will be happily recieved. Jack

I really hate to be a pain, but this has me stumped.
I tried to go to the preferences as you suggested but the same thing happens there. PS just freezes up and cannot be used at all. Even the red X at the top right of the screeen does nothing. I have to use Task Manager in order to quit the program.
I have removed PS from my machine VIA the Windows utility and reinstalled it several times with no improvement. I say that, but at one point I was able to open an image but when I tried to add another the system did the freeze up thing as above.
At some point I began to get sort of an error message during the PS bootup telling me that the PS interface font could not be loaded and that I should reboot my machine. I did that but there has been no change.
Frankly I cannot afford to buy time from Adobe to fix this so I am relying on you and the other folks on the board to hold my hand through this.
I thank you for your time and expertise.
Ralph

Rapidwiz error cannot open shared object file: libpthread.so.0 libc.so.6

Hi,
We are following Note 238276.1 Migrating to Linux with Oracle Applications Release 11i, trying to install the technology stack (Section 2: Step 4), in a RHEL5 64Bits.
We have downloaded the startCD (B29029-01) and the TechStack CDs (B29032-01_2of2). When running the ./rapidwiz from startCD, we get following error:
/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
chmod: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
More info:
[applmgr@desaebs rapidwiz]$ ldd '/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre'
linux-gate.so.1 => (0xffffe000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00bed000)
libdl.so.2 => /lib/libdl.so.2 (0x00be7000)
libc.so.6 => /lib/libc.so.6 (0x00a9f000)
/lib/ld-linux.so.2 (0x00a81000)
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libpthread.so.0
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libc.so.6
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libdl.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/ld-linux.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ locate linux-gate.so.1
It seems that linux-gate.so.1 is not present, I'll try to install it, but I'm not sure this can be the real problem.
Any idea?
Thanks!
Alvaro

Yes, thats correct ...
The actual situation is:
-Customer has split configuration: DB 11g in RHEL5x86-64Bits + APPS 11.5.10.2 in Windows2003
-The target is to have all DB11g and APPS R12 in single node RHEL5x86-64Bits
We're following Note "Migrating to Linux with Oracle Applications Release 11i [ID 238276.1]" to migrate the APPS server from Windows to Linux, as a middle/temporary step prior to make the Migration to R12.
We are trying to do it, but we get errors during Section 2.4 "Install the Middle Tier Technology Stack", running the rapidwiz command we get errors, because of R11i is not supported in 64bits platforms (Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1])
Our bigest doubt now is that we are trying to install 11i techstack into RHEL5 x86-64bits, and we think this is not possible, because of R11i is not supported in 64bits platforms !!!
That is, could we migrate the APPS server from Windows to Linux x86-64 as a temporary step to begin the upgrate to R12 all in RHEL5x86-84bits, that is full supported on this 64bit platform?
What possibilities do we have if we can't do this?
Theese can be some of them:
1-Migrate apps server from actual windows2003 to Linux 32bit, in other host with 32 bits installed, instead of 64bits, and move here from windows to lilnux 32bits, and the begin the R12migration
2-Migrate to R12 into actual appserver Windows2003 and then migrate appserver from windows to rhel5-64bits
I don't like second option, because we want to make the R12 upgrade into Linux, not in windows. We need to eliminate windows platform as soon as we can.
Thanks in advance ,

Validate application server file

Hi,
I have to validate the application server file path on selection screen.
I am using following code :
form VALID_APP_FILEPATH   using    p_filpath TYPE FILENAME-FILEINTERN.
data : l_fname(60).
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      LOGICAL_FILENAME = p_filpath
      OPERATING_SYSTEM = SY-OPSYS
    IMPORTING
      FILE_NAME        = L_FNAME
    EXCEPTIONS
      FILE_NOT_FOUND   = 1
      OTHERS           = 2.
IF SY-SUBRC ne 0.
      MESSAGE 'Enter the valid file path'(e01) TYPE 'E'.
ENDIF.
endform.                    " VALID_APP_FILEPATH
but if i choose correct file path from F4 help also.
It displays error message.
Sy-subrc always equals 1.
Help me out

Hi,
I have implemented the code mentioned by you and am not having any problems even when I use F4 to get the fle name.
Pls recheck and get back if the error persists.
Reward if found helpful.
Warm Regards,
R Adarsh

Cannot open my NEF files in Photoshop CS6 from my new Nikon D800 camera.

That's it, I Cannot open my NEF files in Photoshop CS6 Camera Raw from my new Nikon D800 camera. What am I doing wrong or what is wrong? I have the plug-in Camera Raw 7. and can open TIFF files but not the NEF files.
Peace,
Charles Fennen

Hi ssprengel,
to explain the scenario, i am basically a D7000 user and I do post production with Windows computer. But for an assignment I have hired D800, they have provided me their SD memory card. I have used the same memory card while shooting.
I have transferred the NEF files from the camera using Nikon software. The transfer was successful but i am not able to open the Raw NEF file with ACR. Even my plugins are updated till date.
The NEF thumbnails are having small lock logo in the bottom left corner. I do not know what does that mean. Like this.
Kindly let me know what would be the prob? if my RAW files are corrupted kindly let me know how will I recover them?
Thank you.

Cannot open QB 2007 file after installing R7 upgrade

I installed the Quickbooks Pro 2007 "upgrade" and then tried to open my old Quickbooks Pro 2007 for Mac company file.
1.) It asks me if I want to Upgrade the file (no choice)
2.) Then it simultaneously says "Working" and gives me a warning about the file not being able to be renamed and that I have to rename it and save it in the QB folder.
3.) Then - whatever name I give it - it says it could not create the upgraded file.
4.) It also says that it could not open the existing file.
I'm not sure what to do - the file is only 4.7MB and I've tried every combination to get it to open.
Is there some trick? Nothing about this on the Intuit Forum. Nothing on Google either.
Help would be greatly appreciated as I cannot open my business file!

I guess what is happening is that I originally installed quickbooks and the company file on my macMini and I suspect that it is not opening it on my iMac because of a sharing violation.
I did unlock both the application and the files but they still won't open.
Any suggestions would be appreciated.

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Cannot open application server file even if it exists...

Similar Messages

Maybe you are looking for