Cannot open simultaneous connections to POP3 and SMTP. Why?

This is what happens when I open POP3 and SMTP together. It seems that the host name for smtp is replaced with "localhost".
For two weeks, ever since I added a new servlet to my web application to open a connection to POP3 and check it, I was getting the exception:
<<<<<<<<<<<<<<<<<<<<< exception >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
javax.mail.SendFailedException: Sending failed;
[2003-06-08 10:31:24.895] nested exception is:
[2003-06-08 10:31:24.895] class javax.mail.MessagingException: Could not connect to SMTP host: localhost, port: 25;
<<<<<<<<<<<<<<<<<<< End >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Until this morning, I finally stopped opening the connection to POP3 and the connection to SMTP worked.
Why does this happen? What can I do to have both POP3 checked for incoming mail and be able to send mail out?
Thanks everyone for your help.

I posted this question a few days ago and didn't get any response. It turns out the problem was that I was using the same session for opening connections to SMTP and POP3 and that will not work. I replaced Session.getDefaultInstance(mailProps, null ) with Session.getInstance(mailProps, null ) and so far it's working.

Similar Messages

I want to use Gmail with ACT! by Sage. Can I configure Firefox 3.6 to use POP3 and SMTP features of Gmail so I can send emails directly from ACT!? Thank you.

# 1: I am quite unsophisticated with digital technology--some would call me ignorant in this regard, just so you know.
I use contact manager ACT! by Sage. I have upgraded to a version that allows emailing from within the ACT! application. I would like to use my gmail account and Firefox to send emails from ACT! The people at ACT! say I can use any email service that offiers POP3 and SMTP. I checked and gmail has both. However, gmail says that they do not have instructions for configuring Mozilla Firefox for use with (if I understand correctly) gmail's POP3 and SMTP. So what I want to know is: has anyone done the ACT1, gmail, Firefox connecting and can they send me step-by-step instructions on how to do it? Thank you.

Thanks. I've made progress. I have set up ACT! to to use my gmail account. But a problem arose. Do you know if ACT! is set up for SSL related to POP3? I completed the first two items on the test email and failed the last two.
Also, I went back to Tools Preferences E-mail tab and clicked E-mail system set up the window is blank (my gmail account is gone) and I cannot get to Page 3.
Any thoughts?

Cannot open SQL connection to liveCache LCA

Hi All,
when I'm trying to start liveCache I'm getting an error: "Cannot open SQL connection to liveCache LCA".
Operational state is online.
Kernel - 7.7.07
Next steps are successful:
"LC10 -> liveCache monitoring -> Tools -> dbmcli ::
a) sql_execute select * from users"
From Alert monitor I see an error: "Instance ONLINE, but no SQL access possible". If i try connection test, thenI see:
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4025
   For detailed information, see the developer trace for work process:            2
How to see this developer trace I do not know...

Mark, I have this tool installed.
In those logs I found that:
Thread 0x1A8 Task     35 2010-11-30 23:30:20     Pager      20018: First DataCacheSegment:31
Thread 0x1A8 Task      1 2010-11-30 23:30:21     SrvTasks      31: Permanently reserved 13 servertasks for 'Backup / Restore'.
Thread 0x1A8 Task      1 2010-11-30 23:30:21     SrvTasks      31: Permanently reserved 2 servertasks for 'Backup / Restore'.
Thread 0x1A8 Task      1 2010-11-30 23:30:21     SrvTasks      31: Permanently reserved 1 servertasks for 'Savepoint'.
Thread 0x1A8 Task      1 2010-11-30 23:30:21     RTETask       18: Kernel initialization done
                                                                      DESCRIPTION:
                                                                      The initialization of the Kernel components has finished. All special tasks are started now.
Thread 0x1A5 Task      - 2010-11-30 23:30:21     RunTime        3: State changed from STARTING to ADMIN
Thread 0x1A5 Task      - 2010-11-30 23:30:21     STATE      19601: SERVERDB is ready
============================================ begin of write cycle ==================
Thread 0x1AA Task     71 2010-11-30 23:30:22     CONNECT    19633: Connect req. (LCI, T71, connection obj. 0x000007FFFFE30BF0, Node:'kleva', PID: 6676)
Thread 0x1AA Task     71 2010-11-30 23:30:22 ERR RTEIO         12: attach of volume DATA_VOLUME_0001 failed during open,VOLUME_NO=1,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=1776
                                                                      DESCRIPTION:
                                                                      An error accurred when trying to add the volume DATA_VOLUME_0001 with the logical number 1 to the configuration and physically attach it.
                                                                      ACTION:
                                                                      Contact your system administrator. Show him the error message which points to an operating system configuration error and then contact the database support if your system administrator can not fix the error.
                           2010-11-30 23:30:22 ERR RTEIO          1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
                                                                      DESCRIPTION:
                                                                      An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
                                                                      '. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1AA Task     71 2010-11-30 23:30:22 ERR Admin          3: Database state: OFFLINE,_FILE=Kernel_Administration.cpp,_LINE=692
                           2010-11-30 23:30:22     KernelComm     6: Internal errorcode, Error code 9050 "disk_not_accessible"
                           2010-11-30 23:30:22 ERR Admin      20017: RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration.cpp,_LINE=410
Thread 0x1AA Task     71 2010-11-30 23:30:22     CONNECT    19651: Connection released (LCI, T71, connection obj. 000007FFFFE30BF0)
Thread 0x1AA Task     71 2010-11-30 23:30:22     RTEKernel    112: Offline KILL requested
Thread 0x1AA Task     71 2010-11-30 23:30:22     RunTime        3: State changed from ADMIN to SHUTDOWNKILL
Thread 0x1A0 Task      - 2010-11-30 23:30:22 ERR Messages       7: Begin of dump of registered messages,_FILE=Msg_List.cpp,_LINE=3527
Thread 0x1A0 Task      - 2010-11-30 23:30:19     RTEHSS     13951: No hot standby node configured -> No HotStandby configuration
Thread 0x1A0 Task      - 2010-11-30 23:30:22 ERR RTEIO          1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
                                                                      DESCRIPTION:
                                                                      An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
                                                                      '. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1A0 Task      - 2010-11-30 23:30:22 ERR RTEIO          1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
                                                                      DESCRIPTION:
                                                                      An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
                                                                      '. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1A0 Task      - 2010-11-30 23:30:22     KernelComm     6: Internal errorcode, Error code 9050 "disk_not_accessible"
Thread 0x1A0 Task      -Thread 0x1A0 Task      - 2010-11-30 23:30:22 ERR Admin          3: Database state: OFFLINE,_FILE=Kernel_Administration.cpp,_LINE=692
                           2010-11-30 23:30:22     KernelComm     6: Internal errorcode, Error code 9050 "disk_not_accessible"
                           2010-11-30 23:30:22 ERR Admin      20017: RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration.cpp,_LINE=410
Thread 0x1A0 Task      -Thread 0x1A0 Task      - 2010-11-30 23:30:22 ERR Messages       8: End of the message list registry dump,_FILE=Msg_List.cpp,_LINE=3555
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEKernel     61: rtedump written to file 'rtedump'
Thread 0x1A6 Task      3 2010-11-30 23:30:22     Trace      20000: Start flush kernel trace
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEKernel    111: Tracewriter resumed
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEKernel     94: Waiting for tracewriter to finish work
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEKernel    116: Tracewriter termination timeout: 1200 seconds
Thread 0x1A6 Task      3 2010-11-30 23:30:22     Trace      20001: Stop flush kernel trace
Thread 0x1A6 Task      3 2010-11-30 23:30:22     Trace      20002: Start flush kernel dump
Thread 0x1A6 Task      3 2010-11-30 23:30:22     Trace      20003: Stop flush kernel dump
Thread 0x1A6 Task      3 2010-11-30 23:30:22     RTEKernel    110: Releasing tracewriter
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TASKING    19822: Thread 6712 joining
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TASKING    19822: Thread 6868 joining
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEThread     13: The thread Requestor_LCI is finished
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEThread     13: The thread LegacyRequestor is finished
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TASKING    19822: Thread 6836 joining
Thread 0x1AC Task      - 2010-11-30 23:30:22     RTE        20214: CONSOLE thread stopped
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TASKING    19822: Thread 6716 joining
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TASKING    19822: Thread 6860 joining
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TASKING    19822: Thread 6708 joining
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TASKING    19822: Thread 6864 joining
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEKernel     58: Backup of diagnostic files will be forced at next restart
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RTEKernel    118: SERVERDB LCI has stopped
                           2010-11-30 23:30:22     RTEKernel     14: Kernel version: Kernel    7.7.04   Build 029-123-196-543
Thread 0x1A0 Task      - 2010-11-30 23:30:22     RunTime        3: State changed from SHUTDOWNKILL to STOPPED
Thread 0x1A0 Task      - 2010-11-30 23:30:22     TENANT     20005: Tenant database LCI has stopped
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Looks like I'm not authorized to created folders/files in 'C:\sapdb\LCI\sapdata\'? But I can...

FTPEx: 425 Possible PASV port theft, cannot open data connection..

Hi All,
I am getting the below the error while comminicating to FTP server.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Possible PASV port theft, cannot open data connection.: com.sap.aii.adapter.file.ftp.FTPEx: 425 Possible PASV port theft, cannot open data connection..
This error is random. Some times service is working is fine and some times its failed to process.
Can any one suggest me the peramnent solution for this.
Thanks & regards,
Kartikeya

Hi
The reason for the error is
The ip address (+port) is not same for both these operations
    - Control connection
    - Data Connection
Changing active/passive mode settings might help (as a common solution).
Problem can occur due to below settings,
   - FTP server/ Firewall on its side (affects Passive Mode)
   - FTP client/ Firewall on its side (affects Active Mode)
After Initial Control connection is made, the below happens for Data connection
When Active, the CLIENT opens a dynamic port for DC on which it would be listening, for the server to bind its source port
When Passive, the SERVER opens a dynamic port for DC on which it would be listening for the client to bind its source port
when the firewall on Server side does not have these ports open, you get the above error.
The error could be because of other reasons also, but I suspect that the dynamic port is out range of the ports opened at your FTP server firewall.
So now I think you are one step forward to fix the issue
Regards
Vishnu

I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours.Help me pls.

I have update to iOS 8.1.3, and I cannot open both centers, or use and cancel apps, or the screen change color to gray, or the display do not recognise that I touch it, and more. If I restart it, I find another mistake in next five hours. Help me please.
iOS 8.1.3
iPhone 5s 32 GB
CPU 64 bit

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

FTPEx: 425 Cannot open data connection

Hi,
I am connecting to FTP servers using File Adapter (FTP Protocol). Adapters are running fine. But after couple of hours. When I place a file in FTP folder. Adapter status turns into red and displays below error. I believe this is because of the connection fluctuations between PI and FTPs Server.
Is this the problem from PI or FTPs side? Do we have any SAP note or fix/patch which can take care of this issue? Thanks in Advance.
Adapter Error Message:-
An error occurred while connecting to the FTP server xyz.com:21. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 425 Cannot open data connection.'. For details, contact your FTP server vendor.

Hi All,
I have explained the settings suggested here to FTP team. They replied:
1. The timeout period is currently 120 seconds for control and 30 seconds for data:
2. Toggling Passive/Active can be an issue on its own for firewalls/SSL/NAT...
I am also facing below pasted adapter errors.
Error occurred while connecting to the FTP server "xyz.com:21": java.net.ConnectException: Connection timed out

Service Explorer Cannot open the connection

Hi,
I'm adding a PartnerLink to a BPEL file in JDeveloper. I've check from the SOA Launch console that all services are running correctly.
However, when I open up the Service Explorer by clicking the flashlight, and click on BPEL Services, I get the error dialog "Cannot open the connection". I've tried restarting the machine, restarting all the services, restarting JDeveloper, and I get the same error.

I am not sure if this is too late. I am new to Oracle MW but not new to MW. One thing I notice is very little interaction among the user communitiy. I was wondering no one even tried to address the question/problem of clive jefferies.
OK enough with the speech:
Clive:
I have encountered the same issue and never could resolve and have been struggling hard to resolve this. I am trying the tutorial OrderEntry and there was a mention of using the partnerlink. When all steps failed I clicked on the help on " Services explorer" and found that you need to have an instance of the integration server instance created and running. This you can create by using the wizard for creating new integration server instance. Once you have an instance created and running on your Jdeveloper then you can go ahead with the partnerservice steps.
Hope it helps

The report server cannot open a connection to the report server database

I have SQL server installed to I can connect to RS using my domain/user account. However, when I try to go to http://<machine_name>/Reports/Pages/ReportViewer.aspx, I get error as
    * The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) Get Online Help
          o Login failed for user '<machine name>\ASPNET'
    * I also noticed that after I installed RS,I do not see reports folder under C:\Inetpub. This folder does not exist, I manually created reports virtual folder in IIS and liked it to C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer
    * Thsi is obviously permissions issue and I missing something so your help will be really appreciated.
During installation, I always specified user as domain\user.
Thanks

Hi NewToReporting,
From you descriptions, I know you have tow questions: 1.Why the SQL Server Reporting Services does not create virtual directories in the wwwroot? 2. Why the error "A connection to the database is required for all requests and processing" happen? If I have misunderstood, please do not hesitate to let me know.
One of the changes in SQL Server Reporting Services 2008 is the removal of the Internet Information Services (IIS) dependency. So, we won't see report server virtual directories in the wwwroot folder.
The second problem is caused by the user '<machine name>\ASPNET' does not have permission to login the SQL Server database "Reports".
To solve the issue, please follow these steps:
1.Open SQL Server Reporting Services Configuration Manager(Start - All Programs - Microsoft SQL Server 2008 - Configuration Tools)
2.Go to "Database" tab.
3.Click "Change Credential"
4.In the coming dialog, fill the textboxes with this information(some textboxes are not modifiable )
Server: <the server name of the report server catalog database>
Authentication Type: Current User - Integrated Security (This will use the user we are login to connect to the database server.)
UserName:(If selecting "Current User - Integrated Security", this textbox is not modifiable. )
Password:(If selecting "Current User - Integrated Security", this textbox is not modifiable. )
5. Click Next
6.In the coming dialog, configure the following information:
Authentication Type: Service Credential(This will use the user the reporting services running under to connect to the report server catalog database. The user is the one we configured in "Service Account" tab)
UserName:(If selecting "Service Credential", this textbox is not modifiable. )
Password:(If selecting "Service Credential", this textbox is not modifiable. )
7.Click Next to confirm the information.
8.Click Next to apply.
This will auto add the user '<machine name>\ASPNET' to login group, set this user to be the owner of report server catalog database, and also give this user "RSExce" role.
Now, we are able to connect to the report server.
For more information, please see:
Why Leave IIS: http://blogs.msdn.com/bwelcker/archive/2007/12/04/everybody-why-leave-iis.aspx
Configuring a Report Server Database Connection: http://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin ChenJin Chen - MSFT

Cannot open SQL connection to liveCache LCA - SCM 5.0, LC 14

Good day,
After initial installation, MSSQL kernel 111 and LC 7.6.00 all working fine.
After patching the kernel to 146 and LC to 14, I get "Cannot open SQL connection to liveCache LCA" accompanied by the following in the trace files:
Loading SQLDBC client runtime ...
SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
SQLDBC Library Version : libSQLDBC 7.6.3    BUILD 012-123-169-237
SQLDBC client runtime is MaxDB 7.6.3.012 CL 169237
SQLDBC supports new DECIMAL interface : 0
SQLDBC supports VARIABLE INPUT data : 1
Try to connect as LC5ADM/<pwd>@MBDEVSCM-LC5 on connection 1 ...
ue Apr 08 23:12:14 2008
ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
bsdbsql.cpp 200]
***LOG BY2=> sql error -4008      performing CON        [dbds#1 @ 1044] [dbds    1044 ]
***LOG BY0=> POS(1) Unknown user name/password combination [dbds#1 @ 1044] [dbds    1044 ]
Connect to LCA as LC5ADM with MBDEVSCM-LC5
Try to connect as LC5ADM/<pwd>@MBDEVSCM-LC5 on connection 1 ...
My User LC5ADM does work, I can connect with a SQL_CONNECT in dbmcli.
Is the following a possibility:
Version of SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175?
My kernel versions of dbmssslib.dll and dbmssslib.pdb(146?)
Should I patch dbmssslib.dll and dbmssslib.pdb to 152(available on SAPnet).
Many Thanks in advance,
Derek

Hi Natalia,
Thank you for your reply. I have already checked these from a previous post you have on SDN.
Here is the output of the commands for your review. The user LC5ADM is the correct user, here we go:
sql_execute select * from users
LC5>OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'20080408';'00170104';'20080408';'00170104';'20080408';'00170104';'LC5';'MBDEVSCM.neusiedler.local';0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20080408';'00170104';'20080410';'00190253';'20080408';'00170104';'LC5';'MBDEVSCM.neusiedler.local';10;'NO';(null)
'SUPERDBA';'';'LC5ADM';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20080408';'00170116';'20080408';'00170116';'20080409';'00221530';'LC5';'MBDEVSCM.neusiedler.local';28;'NO';(null)
sql_execute user-type=SAP select user from dual
LC5>OK
END
'LC5ADM'
I have since deleted and recreated LCA, LDA and LEA.
When I tried to start LC, got the following error:
10.04.2008 19:36:32
Server: MBDEVSCM
Users: GALTD
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server     : LC5 - MBDEVSCM
DBMRFC Function     : DBM_EXECUTE
Command             : exec_lcinit restart
Error               : DBM Error
Return Code         :     -24964
Error Message       : ERR_EXECUTE: error in program execution#
Here is the contents of the trace file:
race file:
Loading SQLDBC client runtime ...
SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
SQLDBC Library Version : libSQLDBC 7.6.3    BUILD 012-123-169-237
SQLDBC client runtime is MaxDB 7.6.3.012 CL 169237
SQLDBC supports new DECIMAL interface : 0
SQLDBC supports VARIABLE INPUT data   : 1
SQLDBC supports keepAlive indicator   : 0
Try to connect as LC5ADM/<pwd>@MBDEVSCM-LC5 on connection 1 ...
hu Apr 10 19:38:57 2008
ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
bsdbsql.cpp 208]
***LOG BY2=> sql error -4008      performing CON        [dbds#1 @ 1044] [dbds    1044 ]
***LOG BY0=> POS(1) Unknown user name/password combination [dbds#1 @ 1044] [dbds    1044 ]
Connect to LCA as LC5ADM with MBDEVSCM-LC5
Try to connect as LC5ADM/<pwd>@MBDEVSCM-LC5 on connection 1 ...
hu Apr 10 19:38:58 2008
ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
bsdbsql.cpp 208]
***LOG BY2=> sql error -4008      performing CON        [dbds#1 @ 1044] [dbds    1044 ]
***LOG BY0=> POS(1) Unknown user name/password combination [dbds#1 @ 1044] [dbds    1044 ]
Connect to LCA as LC5ADM with MBDEVSCM-LC5
Try to connect as LC5ADM/<pwd>@MBDEVSCM-LC5 on connection 1 ...
Any other suggestions will be appreciated.
Thank you and Regards,
Derek

TS2834 I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps saying "Mail cannot open because of a problem" and something about not being compatible ??? Help! I miss my mail

I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Where are the settings to invoke SSL for POP3 and SMTP?

I keep getting annoying emails from Yahoo!AT&T who are my internet providers about setting SSL settings for POP3 and SMTP services for receiving emails. I have it configured on my main email settings for my client. Do I have to set it as well for Blackberry service thru Verizon?
If so, where are these detailed settings located?
Thanks,

Located on your providers BIS site.
BlackBerry Help
www.blackberryboards.com

Cannot open socket connection on port 443

Hi!
Our server is running on Port 443.
When I try to Connect from the BlackBerry 9300, an exception is thrown "cannot open socket connection on port 443"
Can any one please help me in finding the solution to enable the port 443.
Thank you in advance!
Regards,
Vinay

I assume that you have verified that you can login to the ftp site using a regular ftp client (e.g. Fetch) on the Mac?

SSL, POP3, and SMTP

I keep getting emails from about setting SSL settings for POP3 and SMTP. I have it configured on my main email settings for my client. Do I have to set it as well for my Blackberry? And if so how?
Solved!
Go to Solution.

You're getting mails from which address? What does it contain?
To get mails in BlackBerry you need to integrate IDs in your device. And to integrate email IDs just follow the below instruction -
Go to Email Settings icon on your device
Login using using the user name and password (if already set by you)
Under Services click on Email Account
Click on Add An Email Account to integrate any POP or IMAP enable email (i.e.. gamil, hotmial, ISP mail etc)
To create BlackBerry.net ID click on Create A BlackBerry Email Address
Type your preferred User Name and enter your Password for that ID
After every successful email integration you'll receive an confirmation email from Activation Server. That's it!! You're done with BIS email ID integration.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

All of a sudden I am receiving photos as winmail.dat files, that I cannot open. What is this, and why can't I open winmail.dat?

All of a sudden I am receiving photos as winmail.dat files that I cannot open. What is this and why can't I open them?

http://www.twistermc.com/583/open-winmaildat-files-mac/

I am using the 30-day trial and have 4 days left. My problem is twofold - 1) I cannot open or see my timeline and don't wish to start over again; it's 15 minutes long

I am using the 30-day trial and have 4 days left. My problem is threefold - 1) I cannot open or see my timeline and don't wish to start over again; it's 15 minutes long - video, photos and audio. 2) My timeline has disappeared, so can't edit further 3) Need best way to export to DVD or my MacBook Pro laptop - don't know which settings/items to choose.
I would appreciate it very much if Apple Support would extend my 30-day trial. I am working on this project for a Multimedia classroom project at Randolph Community Collge, and am also unemployed so can't afford to buy just yet. PLEASE help!

Ok, Tom, I completed the first three steps and everything went fine. However, I still don't have a timeline, AND above is a screenprint of my timeline and what I presume is meant by the PROJECT. There is no project. Now, I can go up to the Event window and Export XML, but it doesn't give me a usable file. So, first, am I correct re: terminology - the timeline/bottom section is also known as the project folder/manager??
I've been reading other users strings as well and have tried their tricks as well. For instance, Eric Martin re: his deleting preference files (6/6), and Norman Jayo's (4/25) lengthy discourse with the "here is the work around" w/ 7 steps. Again, he mentions closing the PROJECT that is corrupted. I'm not sure that mine is corrupt as I can play and see my 15-minute audio/view in the view module (upper right).
So, back to the beginning...

Cannot open simultaneous connections to POP3 and SMTP. Why?

Similar Messages

Maybe you are looking for