Cannot print from file drop down menu, nor any other usual method in firefox 6.0 for win 7 home prem 64 bit

when i try to print from your browser i click on file then choose print and nothing happens, nothing happens when i try it from file drop down and click on print preview, this is the case with Firefox 4 5 and 6! with win 7 home premium 64 bit
it will not even let you print from the rt. click menu, that selection is not highlighted when you select a word a sentence a page or anything, and there is no print icon available in your customize the toolbar menu either, the only way I can print a page from your browser is to open internet explorer and dag the page from your browser to msie and have that browsers printer icon clicked on and it prints using m.s.i.e. 9 .
in short there is no way to print from your browser, that I have located???????? help me

Similar Messages

MS Word-missing print in file drop down menu

My Mom runs Microsoft Word on her approx 4-year old iMac using OSPanther.
Just recently, when she wants to print using the File-drop down menu to select print, the print option is not there at all. Not just suppressed. Not there at all. Command+P does not work either
No problems with, for example, Safari and Mail. Just Word.
Any ideas on how this could happen? Some sort of odd preference?
N.

This forum is for AppleWorks, the Apple 'office' application. With questions specific to MS Word you would be best of asking in a Microsoft forum for the product, or you could try the Apple Discussions forum for whichever version of OSX you are using.

The "New Tab" function does not work either from the tab bar, the File drop down menu or using CTRL+T

The new tab is visible on the the tab bar but clicking on it does not open a new tab.Neither can I open a new tab from the File drop down menu, nor the Ctrl+T method as indicated in the troubleshooting guide.

Un-install the '''''Ask Toolbar''''' which many users have reported causing that problem.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Shockwave Flash 10.1 r102
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

HT1918 Trying to make make account changes to my itunes account. Receive error message regarding province "enter at most 3 letters" when the only option I have is to select from a drop down menu. Cannot make changes to my account. How do I get this fix

As you can tell, this is my first post
I am attempting to make changes to my itunes account, but when I hit done, an error message "enter at most 3 letters or numbers for province" appears. I have not attempted to make any modificaitons to this field. The only options I have for data in this field are picked from a drop down menu. I have no idea why this msg is appearing. Any ideas on why it is showing up? Thanks.

There seems to be at least one package that can't be located. See the message below from you log file
Requesting locations synchronously for content SDC00003.2
with priority Medium ContentAccess 4/3/2015 1:30:51 PM 2644 (0x0A54)
The number of discovered DPs(including Branch DP and Multicast) is 0 ContentAccess 4/3/2015 1:30:51 PM 2644 (0x0A54)
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Selecting the XML data from a drop-down menu or links

Hi, I have this page:
http://www.georgeglazer.com/prints/nathist/botanical/volckinv/volckinv.html
There are prints of lemons/limes and prints of oranges. I
want to have the visitor select which kind of fruit from either a
drop-menu or from two links that look something like this:
Lemons/Limes | Oranges. Looking at other help docs I found the
region/state mapping demo at
http://labs.adobe.com/technologies/spry/samples/data_region/StateMappingSample.html,
and copied the code and tried to modify it. But I don't really
understand the technical shorthand of the help docs (an ongoing
problem I have with the Spry documentation) and I couldn't find the
XML docs that the region/state mapping demos are based on so I
couldn't see how they were set up.
I got as far as this: nothing loads initially when you open
the page (I'd like the lemons to load), but if you select Oranges
from the drop-down menu you see the oranges, and THEN once you've
done that, you can select Lemons/Limes in the drop-down menu and
see those. I have three XML files I've been playing around with to
get this to work: lemons.xml, oranges.xml and inventory.xml, which
combines the two.
I also suspect region/state mapping might not even be exactly
what I'm trying to do here, but I can't figure out from the
documentation exactly what this thing I'm trying to do is called. I
know the photo album demo accomplishes something similar, and I
could do that, but it seems way more complicated than what I need
here (right?). Help will be appreciated!
Thanks,
Helen

I made a different test using the file
http://www.georgeglazer.com/prints/nathist/botanical/volckinv/inventory.xml
and
http://www.georgeglazer.com/prints/nathist/botanical/volckinv/volcktest.html
where I sent up the inventory xml form like one I found in the
Nested XML Data documentation where you have item ids and types, so
all the oranges and lemons are in one XML document (which I'd
prefer).
Here's an abbreviated version of the inventory.xml:
<inv_items>
<inv_item id="1" type="lemon">
<name>Lemons and Limes</name>
<title>Cedro Ordinario</title>
<plate>116a</plate>
<fullimage>pl116a.jpg</fullimage>
<tn>pl116a-2.jpg</tn>
</inv_item>
[and more lemons follow]
<inv_item id="19" type="orange">
<name>Oranges and Others</name>
<title>La Zucchetta Imperiale</title>
<plate>138a</plate>
<fullimage>pl138a.jpg</fullimage>
<tn>pl138a-2.jpg</tn>
</inv_item>
[and more oranges follow]
</inv_items>
What I'd like to do is display the names "Lemons and Limes"
and "Oranges and Others" and when you click on "Lemons and Limes"
you see only the thumbnails for lemons and limes, and when you
click on "Oranges and Others" you see the thumbnails for only
those. I'd like the Lemons and Limes to be selected when the page
is opened.
Help greatly appreciated!

Execute option missing from JSP drop down menu

I'm going through a Java Web Development class and trying to produce a small web app through Sun Java Studio Enterprise 7 2004Q4. I have two servlets, a couple of classes and two JSPs. At seemingly random times the "Execute" and "Execute (force reload)" options from the drop down menu you get when you right click a JSP fails to show up. It isn't grayed out, it just isn't there. Most of the time these options are there. And they can be there one time and then for the same project, same set of JSPs everything, they just disappear.
Can anyone tell me what dumb thing I'm doing to cause this?
And can anyone tell me how to fix it once I've done it?
Thanks
DR Crowley

First of all thank you for all the time you are spending on this. Believe me I know how frustrating it can be to figure out what is happening when you can't reproduce the problem.
On to your questions: I am running Windows XP Professional. I have checked and made sure that the extension is still .jsp and that it isn't changing. No I don't have the IDE set up to show extensions, however the icon beside the file is the jsp icon and when I go to Windows explorer (where I do have it set to show known extensions) it is a .jsp file and does not have the ever exasperating hidden extension that windows is infamous for. Sun Studio seems to recognize the file as a proper jsp (due to the icon).
As to your further questions. I am executing it by right clicking on the jsp file itself. And the jsp file is in the documents folder not in the web/inf folder.
At this point we are out of the class and it isn't nearly as important that I get an fix. We (our company) will probably not do jsp files and servlets thourgh Sun Java Studio Enterprsise. Instead we are looking at using Sun Java Studio Creater to do the view layer.
Thanks for all your help and the time you took to try to figure this out.

Enabling certain functions from a drop down menu

I am using the run-time menu along with case statements to control the flow of my program. I would like to ensure that a certain option is disabled until a number of other options have been selected. It is for a near field emissions scanning program. Basicly I would like to make sure that the file path and any notes about the sweep (product serial number, position, mode) are entered prior to selecting "run sweep" from the drop down menu. I know that an option can be disabled permenately by selecting disabled and grayed while the run-time menu is being setup, but this not what I want to do. I simply the "run sweep" option to be disabled until the sweep info and file path have been setup. How can I go about doing this? Thanks everyone!
Kirk Fabbri
Associate EMC Test Engineer
Gentex Corporation
Zeeland, MI
(616)772-1800 ext 4571

On the block diagram, right click on the list control, select Create -> Property Node. Usually this will create a Visible property node. Left click on the word Visible, and select Disabled Items [ ] from the list. Then right click again and select Change to Write. You can then wire a numeric 1D array into the property node. Whatever numbers are in the array, those corresponding elements in the list will be disabled. So you can disable whatever you want before a certain action, and then use the property node again to enable items after the action is done. To enable all items, wire in an empty numeric array.
- tbob
Inventor of the WORM Global

I'm trying to email a batch of photos. There is no file drop down menu.

I'm trying to email a batch of photos. There is no file drop down menu. Therefore I cannot choose export. What am I missing?

Hi tylersmom22,
If you are having unexpected disconnect issues with your iPhone when connected to iTunes, you may find the troubleshooting steps in the following article helpful:
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Regards,
- Brenden

I have lost all of my bookmarks from the drop-down menu. It says it is empty, but never have I deleted them. And when I bookmark a page it does not save it. Please help

Question
I have lost all of my bookmarks from the drop-down menu. It says it is empty, but never have I deleted them. And when I bookmark a page it does not save it. Please help

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

Filter query based on a value from a drop down menu

I am using ADFBC/JDev 10.1.3/ADF-faces (JSPX)
I would like to display a table of data based on a view object and have a drop down menu of values that the user can select from which would filter the table of data. The filter would be applied to a field in the VO. For example, have a JSPX page that shows all employees and have a drop down menu that filters the employees by a specific department with an option to show all departments too in the drop down. I'm not sure if Steve Muench's example #76 (http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html) would serve as a basis for this requirement or not.
Can anybody give me high level guidance on how to do this? Both declaratively and programmatically would be great.
Thanks,
Quoc

I can't get the JSPX page to display the correct data. It's displaying the entire VO and when you try to select Yes or No or All from the drop down menu, it just changes the Active Flag column in the table to whatever you select for the first row only and still displays the rest of the rows in the VO.
Here's my JSPX code:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces"
          xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
          xmlns:cust="http://xmlns.oracle.com/adf/faces/customizable">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
              doctype-system="http://www.w3.org/TR/html4/loose.dtd"
              doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <afh:html>
      <afh:head title="showEmployees">
        <meta http-equiv="Content-Type"
              content="text/html; charset=windows-1252"/>
      </afh:head>
      <afh:body>
        <af:messages/>
        <h:form>
          <af:panelForm>
            <af:selectOneChoice value="#{bindings['bind_active_flag1'].inputValue}"
                                label="#{bindings['bind_active_flag1'].label}">
              <f:selectItems value="#{bindings['bind_active_flag1'].items}"/>
            </af:selectOneChoice>
            <af:commandButton actionListener="#{bindings.ExecuteWithParams.execute}"
                              text="ExecuteWithParams"
                              disabled="#{!bindings.ExecuteWithParams.enabled}"/>
          </af:panelForm>
          <af:table value="#{bindings.EmployeesView.collectionModel}" var="row"
                    rows="#{bindings.EmployeesView.rangeSize}"
                    first="#{bindings.EmployeesView.rangeStart}"
                    emptyText="#{bindings.EmployeesView.viewable ? 'No rows yet.' : 'Access Denied.'}">
            <af:column sortProperty="EmployeeId" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.EmployeeId}">
              <af:outputText value="#{row.EmployeeId}">
                <f:convertNumber groupingUsed="false"
                                 pattern="#{bindings.EmployeesView.formats.EmployeeId}"/>
              </af:outputText>
            </af:column>
            <af:column sortProperty="FirstName" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.FirstName}">
              <af:outputText value="#{row.FirstName}"/>
            </af:column>
            <af:column sortProperty="LastName" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.LastName}">
              <af:outputText value="#{row.LastName}"/>
            </af:column>
            <af:column sortProperty="ActiveFlag" sortable="true"
                       headerText="#{bindings.EmployeesView.labels.ActiveFlag}">
              <af:outputText value="#{row.ActiveFlag}"/>
            </af:column>
          </af:table>
        </h:form>
      </afh:body>
    </afh:html>
</f:view>
</jsp:root>Here's the bindings page:
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
                version="10.1.3.41.57" id="showEmployeesPageDef"
                Package="view.pageDefs"
                MsgBundleClass="view.pageDefs.showEmployeesPageDefMsgBundle">
<parameters/>
<executables>
    <iterator id="EmployeesViewIterator" RangeSize="10" Binds="EmployeesView"
              DataControl="AppModuleDataControl"/>
    <variableIterator id="variables">
      <variableUsage DataControl="AppModuleDataControl"
                     Binds="EmployeesView.variablesMap.bind_active_flag"
                     Name="EmployeesView_bind_active_flag" IsQueriable="false"/>
    </variableIterator>
    <iterator id="DropDownIterator" RangeSize="-1" Binds="DropDown"
              DataControl="AppModuleDataControl"/>
</executables>
<bindings>
    <table id="EmployeesView" IterBinding="EmployeesViewIterator">
      <AttrNames>
        <Item Value="EmployeeId"/>
        <Item Value="FirstName"/>
        <Item Value="LastName"/>
        <Item Value="Email"/>
        <Item Value="PhoneNumber"/>
        <Item Value="HireDate"/>
        <Item Value="JobId"/>
        <Item Value="Salary"/>
        <Item Value="CommissionPct"/>
        <Item Value="ManagerId"/>
        <Item Value="DepartmentId"/>
        <Item Value="ActiveFlag"/>
      </AttrNames>
    </table>
    <action id="ExecuteWithParams" IterBinding="EmployeesViewIterator"
            InstanceName="AppModuleDataControl.EmployeesView"
            DataControl="AppModuleDataControl" RequiresUpdateModel="true"
            Action="95">
      <NamedData NDName="bind_active_flag" NDType="java.lang.String"
                 NDValue="${bindings.EmployeesView_bind_active_flag}"/>
    </action>
    <attributeValues id="bind_active_flag" IterBinding="variables">
      <AttrNames>
        <Item Value="EmployeesView_bind_active_flag"/>
      </AttrNames>
    </attributeValues>
    <list id="bind_active_flag1" IterBinding="EmployeesViewIterator" StaticList="false"
          ListOperMode="0" ListIter="DropDownIterator" NullValueFlag="1"
          NullValueId="bind_active_flag1_null">
      <AttrNames>
        <Item Value="ActiveFlag"/>
      </AttrNames>
      <ListAttrNames>
        <Item Value="Value"/>
      </ListAttrNames>
      <ListDisplayAttrNames>
        <Item Value="Description"/>
      </ListDisplayAttrNames>
    </list>
</bindings>
</pageDefinition>Any ideas?

When i pick my brush tool and try to get a soft brush from the drop down menu they all look white, i

When i pick my brush tool and try to get a soft brush from the drop down menu they all look white, i don't see a soft brush from a non soft brush.How can i fix this issue in photoshop? Thanks

Hi tvilela,
Do you, by chance, have the Pencil Tool selected in place of the Brush Tool.
-Noel

Since I upgraded to os x maverick when I try to close with cmd + q from the drop-down menu the app store and I IMOVE reopen continuously.

since I upgraded to os x maverick when I try to close with cmd + q from the drop-down menu the app store and I IMOVE reopen continuously.

2 GB of RAM is pretty tight. I imagine that's at the very low end of what Yosemite wants, which could slow things down.
As far as scroll direction, you can always change it in the trackpad settings. Unsure why it got flipped, but you can fix it in about 5 seconds. Choose "natural" (or don't) depending on how you like it.

I just downloaded photoshop elements - have opened an existing pdf drawing - 1) I am trying to create layers; however, the option is not available? (i.e. greyed out rather than black) from the drop down menu - "layer" - "create new"? what do i do

i just downloaded photoshop elements - have opened an existing pdf drawing - 1) I am trying to create layers; however, the option is not available? (i.e. greyed out rather than black) from the drop down menu - "layer" - "create new"? what do i do

You'd better ask here:
https://forums.adobe.com/community/photoshop_elements

Linking a page as a browser window from a drop-down menu item

I have tried to link from a drop-down menu item to link to a small browser window instead of a full page. I tried using the "behaviors" but I got both the regular page and the browser window. Is there a way to make it just the browser window.
Thanks.

I tried that target=_Blank" but I still got the regular page plus the small browser window . I got rid of the Behavior for now. My aim is to would display the page in a simple 450 wide x 450 long browser window with a scroll bar with nothing else. If you can give me a code hint to do that, It would be appreciated. I'll figure out the rest.
My HTML coding skills are limited, as I'm used to using FP.(FP seems to be to the Web circles as the Bard's Scottish Play is to the theatrical world)

How to make chooser drop down menu, Example i want choices 1 or 2 or 3 from the drop down menu or Location , Egypt , USA , Canda

how to make chooser drop down menu, Example i want choices 1 or 2 or 3 from the drop down menu or Location , Egypt , USA , Canda

Hello,
Where do you want to insert it in Muse. Do you want to add this in Muse Form widget then you can use the widget mentioned in the link below.
Forms+ Bundle Widget – Widgets.Mu
If you want to insert it anywhere else in Muse and if you have the HTML codes for that then you can insert its codes in page from Object > Insert HTML.
You may also require to use some java scripts to make them working as expected.
How to Make JavaScript Dropdown List - YouTube
Regards
Vivek

Cannot print from file drop down menu, nor any other usual method in firefox 6.0 for win 7 home prem 64 bit

Similar Messages

Maybe you are looking for