Cannot remove non-connected host through webtool

Using OSB 10.3.0.2.0
I am unable to use the webtool to remove an unconnected host.
In the webtool I go to Configure -> Hosts, I highlight the host name I want to remove, select the box for Suppress communication with host, and click remove. I choose Yes for the question "Are you sure you want to remove 'hostname'" and receive the error
Error: can't connect to OB host ausperf20 - No route to host
Obviously selecting "Suppress communication with host" should allow this to work.
Removing the host through the command line still works
obtool rmhost --nocomm hostname
Is this a known bug in the webtool?

Yep there is a bug here, looks like the webtool isn't sending the nocomm option, just the nq
The problem is in 10.3.0.3.0 too.
Internal Bug # 10199325 has been passed to the OSB development team for this issue.
Thanks
Rich

Similar Messages

Error in removal of 'R' Block through FB02

Dear Experts,
I have removed the 'R' Block through TCode: MRBR. It is removed in invoice too but when i changed the payment method, 'R' block is reinstated in invoice. I cannot remove the 'R' block through FB02 as it is in diplay mode( Greyed out). Kindly suggest how to remove 'R' Block from the invoice.

Hi,
Remove the payment block from the payment methods frm Tran OBB8 and then reprocess the invoice. alternatively you can also remove the block fm the invoice level thru FB02 change mode, see if some one else is accessing the docuemnt if so it will show as gryed out
hope this helps
regards,
radhika
Edited by: kolipara radhika on Jun 22, 2009 2:42 PM

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

2012 r2 Server Manger cannot manage RDS: Collections, Host Servers, and Connections won't display

Hello,
We have a 2012 r2 server running RDS publishing a number of RemoteApps.
When we go to the Server Manager and drill down to the Remote Desktop Services area we are seeing a number of the sections that will not display their information and we can no longer manage RDS via Server Manager.
Starting at Server Manager\Remote Desktop Services\Overview the "Deployment Servers" window shows a red banner with "Could not refresh the list of servers"
Going to the Server Manager\Remote Desktop Services\Collections, all three of the windows, Collections, Host Servers, and Connections will eventually display the similar type of error message, stating to check the status of the services for Remove Desktop
Connection, Windows Remote Management and Windows Internal Database.
The server is fully patched, event logs don't show anything of note.
We've rebooted the server and confirmed all those services and all "Remote Desktop *" services are running.
We're still able to access the RDWeb instance to use the published applications.
This had been working previously, not sure when it last was though as we don't always go into Server manager. We can manage the remoteapps via powershell, but are curious why Server Manager no longer functions.
Any assistance would be greatly appreciated.
thanks...

Hi,
Please check whether your RD Connection Broker is member of “Windows Authorization Access Group” under ADUC and then verify the result. If possible restart the server. Also check whether you have properly setup SQL server for database access. Apart
recheck the related services detailed in error, must be running. This is only needed if the Domain the system is connected to was setup with as Pre-Windows 2000 Compatible.
http://support.microsoft.com/en-us/kb/331951
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

"Contribute cannot verify your connection information"

Please can somebody help a non-techie from England (New Forest) who has hit a brick wall when using Contribute 3?
I have a community (voluntary and not-for-profit) website as a sub-domain on my business website. Don't ask me how I managed it, but I created the community website entirely on the Contribute software. For unknown reasons, it would not allow me to edit and upload pages etc., even though I have been doing this for some time. I uninstalled the program, re-installed it and starting again tried to make a connection.
I got the error message "contribute cannot verify your connection information. The path given does not match the provided website's homepage; or there may be a permission problem. Please contact your administrator for assistance".
Well, obviously I can't administer the site yet because I cannot get a connection! I have asked my web-hosting company to verify the information I need and he tells me that he is able to get into the site with no problem using the same information - he is using contribute CS4.
This is killing me with frustration because I so need to get some vital information out to our 34k residents which is time-critical (by 3rd Dec latest). I have put so much work into this without moaning, but am now at the end of my patience and feel like throwing the towel in. The site is onevoice.officeoverload.com if you would like to see what I mean.
Thanks for reading this - apologies that it is long. If anyone out there can help I would be so very grateful to hear from you
Best wishes
Sue

Sue,
Maybe I can help you as I just solved my own connection problem after trying to get help from Adobe online support, phone support, and this forum for over a month.
You will need to have access to your Contribute Server installation. If you are using a MS Windows based pc and it was installed using the defaults it should be located here: C:\Program Files\Macromedia\Contribute Publishing Server. Under the CPS folder there will be a number of folders but you only need to open the database folder. Inside that folder will be a folder(s) with it's name being a number [1,2,3 - depending on the number of sites that you connect to]
Inside each of the site folders there will be a groups folder and user folder and a file named connection_key.stc.
I moved all of my site folders to another folder I created off the root folder [C:/contribute database backup].
That has the same effect as deleting the folders, but gives you the option to restore them if you need too.
Then I open the Contribute Client and it allowed me access and I deleted the existing folders and drafts.
Then I went to the site that I wanted to connect to and recreated the connection using the prompts. I had to recreate all of the users and assign their roles for the each site.
I did have a problem recreating one of my sites because it gave me the message that there were "drafts that needed to be deleted or exported", but it wouldn't let me do either of those things. I did a seach of my computer for the word "draft" and it found two files buried in some hidden file. I deleted those files and then I was able to recreate that web site connection.
I think the connection_key.stc file is the important file that needs to be removed as it contains an encrypted string of data.
In fact I also copied the connection_key.stc from one site folder to another and then I was able to get into the site, delete its connection (it was connecting to the wrong site of course) and then recreate the connection.
I hope this helps.
Jim

Java.lang.IllegalStateException: cannot add non-XA Resource to global JTS t

Hi,
I am using JCAPS 5.1.2.
As one of my project requirement I am invoking a jcd from page flow and that jcd uses 2 oracle otd, each oracle otd corresponds to database which resides in two different machines/hosts.
When jcd is invoked from page flow, i got following error,
"java.lang.IllegalStateException: cannot add non-XA Resource to global
JTS transaction."
[#|2007-07-17T19:13:06.209+0530|SEVERE|IS5.1.2|javax.enterprise.resource.resourceadapter|_ThreadID=17; ThreadName=Worker: 3;stacktrace-id=0;|RAR5029:Unexpected exception while registering component
java.lang.IllegalStateException: cannot add non-XA Resource to global JTS transaction.
     at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:171)
     at com.sun.enterprise.resource.ResourceManagerImpl.registerResource(ResourceManagerImpl.java:97)
     at com.sun.enterprise.resource.ResourceManagerImpl.enlistResource(ResourceManagerImpl.java:71)
     at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:142)
     at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:202)
     at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:148)
     at com.stc.gjc.spi.DataSource.getConnection(DataSource.java:67)
     at com.stc.connector.oracleadapter.base.SessionImpl.connect(SessionImpl.java:130)
     at com.stc.connector.oracleadapter.OracleSession.open(OracleSession.java:98)
     at com.stc.connector.oracleadapter.OracleConnector.open(OracleConnector.java:90)
     at com.stc.connector.oracleadapter.appconn.OracleApplicationConnection.<init>(OracleApplicationConnection.java:63)
     at com.stc.connector.oracleadapter.appconn.OracleApplicationConnection.<init>(OracleApplicationConnection.java:50)
     at com.stc.connector.oracleadapter.appconn.OracleApplicationConnectionFactory.getConnection(OracleApplicationConnectionFactory.java:133)
     at com.stc.oracle.runtime.ejb.OracleEWayRuntimeHandler.initializeService(OracleEWayRuntimeHandler.java:256)
Please let me know is there any work around for above problem
Message was edited by:
VenkateshSampoornam

Hi Paul,
Thanks for your reply. I ddidn't specify XA at page
flow level.
But the problem is rectified for me.
I have two jcds in which one of them connects to two different oracle databases for e.g host A and host B.
JCD1 connects to host A and host B[ 2 oracle otds]
JCD2 connects to host B. [single oracle otd]
I had three external applications for each otd
In deployment profile, i connected two external applications to single external system for HOST B.
When i created one more new external system for host b and moved one external application to that.
After then the problem didn't occur again.
null

Downloaded an app on my iphone and cannot remove.

i downloaed the iphone app from this site: http://jimandkelly.net/go2snowshoe
and i cannot remove it.
when the iphone is is connected to itunes, the app "go2snowshoe" does not appear so there is nothing for me to uncheck or delete and i cannot seem to remove it from my phone.
can someone help me remove the app?
thanks.

that method no longer works.
not sure if that solution stopped with the iphone 5 hardware or the ios 6.
the current way to delete an app is through itunes and again, as i indicated above, this particular app does not appear in itunes so i am unable to delete/uncheck it.
thanks.

Cannot establish a connection using a iphone-hotspot

I am playing around with my Psion EP10 (uses WM 6.5) and when I try to connect to my personal hotspot (coming from my iPhone 4 running iOS 7.0.3), it seems like the EP10 connects, but I cannot use the connection (i.e. use the Internet Explorer).
When checking the status of the network, it shows me that I am connected and everything else (channel, ip, mac, etc.).
The personal hotspot does work with my PC and with another device (non-Psion) running WM 6.5.
Note: Using another hotspot, i.e. one coming from a Android-based smartphone, works as intended.
What I tried
resetting the network-settings on my iphone
cold-booting the EP10
changing the password for my hotspot
configure the connection without using windows for the wireless-configuration
I also wanted to remove/change the security from the hotspot (i.e. setting no password at all), but there does not seem to be an option to do this?
I found a similar discussion on the apple-forums (https://discussions.apple.com/message/23116689#23116689), stating that sometimes it is necesseary to fill in APN-settings although they are automatically provided by the provider.
Since I wasn't able to find the menue for the APN-settings (under Settings -> Mobile), I googled some more and were finally able to install a profile (with the help of the iphone configuration software) which set my APN-settings on my phone.
Unfortunately with no effect.
Any ideas how to sort this problem out?

After some research I found out that it is (most likely) not possible to change the kind of security for your personal hotspot (proov me wrong if there is a way).
Funny thing is also, that I do get an IP-adress on my device (Psion EP10), but I'm not able to ping my iphone nor other devices connected to my personal hotspot.

AAAGGHHH!!! Have WRT54G V8, all lights a go, but cannot detect internet connection

Any help is a Plus!!! Just bought my wife a WRT54G V8 router from Best Buy. The thing is less than 2 weeks old. Have yet to figure how to set it up. I have ran the CD, it gets to about %89, stops and says "Cannot detect internet connection, ck cables and try again". Have went through the speal w/the phone self help setup, downloaded the instructions from the Liksys support site, and set on hold for about 30 minutes before getting sick of waiting for help. I don't have a firewall other than the Windows firewall, my DSL service is through Verizon (MSN). When the router is hooked up I can't sign on to the internet at all. If I unhook the router and hook the modem back into the computer it works fine. I am at a loss, Please Help!!!

melsky wrote:
check first what is your ip when you are connected straight to your modem
if it is 192.168.1.1, disconnect the modem from the internet port of the router
turn the router off wait 10 sec. then back on
with the pc connected to e.g. port no. 1 on the router, open internet explorer, on the address bar type in 192.168.1.1 - uname none/blank password admin
then on set up look for local ip address change that to 192.168.2.1
Melsky, this is a very confusing post.You say to check the ip you get when connected to the modem, if it is a 192.168.1.1 address then disconnect the modem from the internet port of router.
First, you would never get a 192.168.1.1 address from the modem. If the modem has a built in router or just a dhcp server IT would most likely be 192.168.1.1 so it would not assign that address to anything else.
Second, you say to check ip directly connected to modem, but then you say to disconnect the router if the address is a 192.168 address. If they connect directly to the modem, the router is already disconnected.
Very confusing.

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

"Cannot perform operation, connection is closed" with Open MQ 4.4

I am using Sun MQ 4.4 with Glassfish 2.1.1 on Red Hat 5.7.
I am able to install glassfish cluster and all the instances are running fine. But, when I try to send a message to a topic, I get following exception
javax.jms.IllegalStateException: [C4062]: Cannot perform operation, connection is closed.
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.checkConnectionState(ConnectionImpl.java:2468)
at com.sun.messaging.jmq.jmsclient.XAConnectionImpl.createSession(XAConnectionImpl.java:105)
at com.sun.messaging.jms.ra.ConnectionAdapter.createSession(ConnectionAdapter.java:383)
Following is part of the stateless EJB where I am creating the session.
@PostConstruct()
private void init() {
if (connectionFactory == null) {
if (log.isTraceEnabled()) log.trace("Connection factory not set. Retrieving from server context.");
InitialContext ic = new InitialContext();
connectionFactory = (ConnectionFactory) ic.lookup("jms/testConnectionFactory");
if (log.isTraceEnabled()) log.trace("Creating JMS connection.");
connection = connectionFactory.createConnection();
@WebMethod()
public void send(){
Session session = null;
session = connection.createSession(true, Session.SESSION_TRANSACTED);
I am trying to install these on a couple of new machines. Same application works on other machines so I am guessing this is a configuartion issue somewhere on these servers.
My question is what would be a good way to find the cause of this failure.
I have turned on log level to finest for ejb-container, jms, RA through glassfish Admin console, but no useful information.
Also, I don't have the name of the servers in DNS yet. I am using IP address for specifying instances.
Any suggestions ?
Thanks
Vineet

Hi Tom,
I used the demo/helloworld/helloworldmessage.java sample.
By the way, I should add that the broker log contains lines like:
[B1066] Closing [email protected]:2461 because "[B0061]: Client exited without closing connections"
Is this what one would expect for a connection.close() ?
It almost seems that this is happening only when the connection is nulled explicitly or the connection object is destroyed.
One last thing:
I was led down the garden path. The reason for the server being thread starved was that there were indeed connections not being closed/nulled.
Thanks in advance,
Patrice
Edited by: paubry04 on Sep 13, 2007 8:21 AM

Cannot use Remote Desktop host on Windows 8.1 Pro, termsrv corrupted?

Hello,
Few days ago I upgraded my home desktop machine from Windows 8.1 to Windows 8.1 Professional so I can use the Remote Desktop feature.
I enabled everything needed, checked "Allow computers to connect to this computer" from the Remote Settings, forwarded the port 3389 in my rounter and allowed it in my firewall etc...
But I still can't connect to this computer from outside my home network or inside it. The error I get trying to connect is this:
(For some reason i still can't post images in this forum...) So I posted a link below to my original thread with the images
I'm trying to connect using a laptop running Windows 7 Home Premium.
After searching around I found out that the service responsible for the RDP is called "TermService", I found it on my services but was unable to start it:
(For some reason i still can't post images in this forum...) So I posted a link below to my original thread with the images
Also, notice the description of the service. So I tried to run a System File Checker on the service's DLL (sfc /scanfile=c:\windows\system32\termsrv.dll) and got this log:
2014-10-05 14:20:41, Info CBS TI: --- Initializing Trusted Installer ---
2014-10-05 14:20:41, Info CBS TI: Last boot time: 2014-10-05 13:56:05.492
2014-10-05 14:20:41, Info CBS Starting TrustedInstaller initialization.
2014-10-05 14:20:41, Info CBS Ending TrustedInstaller initialization.
2014-10-05 14:20:41, Info CBS Starting the TrustedInstaller main loop.
2014-10-05 14:20:41, Info CBS TrustedInstaller service starts successfully.
2014-10-05 14:20:41, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2014-10-05 14:20:41, Info CBS Startup processing thread terminated normally
2014-10-05 14:20:41, Info CBS Starting TiWorker initialization.
2014-10-05 14:20:41, Info CBS Ending TiWorker initialization.
2014-10-05 14:20:41, Info CBS Starting the TiWorker main loop.
2014-10-05 14:20:41, Info CBS TiWorker starts successfully.
2014-10-05 14:20:41, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:41, Info CBS Universal Time is: 2014-10-05 11:20:41.783
2014-10-05 14:20:41, Info CBS Loaded Servicing Stack v6.3.9600.17246 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.17246_none_fa4ae8e99b1f603c\cbscore.dll
2014-10-05 14:20:41, Info CSI 00000001@2014/10/5:11:20:41.786 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffee15c60e5 @0x7ffeeace2e53 @0x7ffeeace24ac @0x7ff69a94d2df @0x7ff69a94dc97
@0x7fff02912225)
2014-10-05 14:20:41, Info CBS SQM: Initializing online with Windows opt-in: True
2014-10-05 14:20:41, Info CBS SQM: Cleaning up report files older than 10 days.
2014-10-05 14:20:41, Info CBS SQM: Requesting upload of all unsent reports.
2014-10-05 14:20:41, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2
2014-10-05 14:20:41, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
2014-10-05 14:20:41, Info CBS NonStart: Set pending store consistency check.
2014-10-05 14:20:41, Info CSI 00000002@2014/10/5:11:20:41.801 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffee15c60e5 @0x7ffef3637fc0 @0x7ffef36380f2 @0x7ff69a94ca25 @0x7ff69a94dcae
@0x7fff02912225)
2014-10-05 14:20:41, Info CSI 00000003 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x559943db20
2014-10-05 14:20:41, Info CSI 00000004 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-10-05 14:20:41, Info CSI 00000005 Created NT transaction (seq 1) result 0x00000000, handle @0x26c
2014-10-05 14:20:41, Info CSI 00000006 Poqexec successfully registered in [ml:26{13},l:24{12}]"SetupExecute"
2014-10-05 14:20:41, Info CSI 00000007@2014/10/5:11:20:41.999 Beginning NT transaction commit...
2014-10-05 14:20:41, Info CSI 00000008@2014/10/5:11:20:41.999 CSI perf trace:
CSIPERF:TXCOMMIT;143
2014-10-05 14:20:42, Info CSI 00000009 CSI Store 367642371808 (0x00000055993166e0) initialized
2014-10-05 14:20:42, Info CSI 0000000a [SR] Verifying 1 components
2014-10-05 14:20:42, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:42, Info CSI 0000000c [SR] Verify complete
2014-10-05 14:20:52, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:55, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:55, Info CSI 0000000d [SR] Verifying 1 components
2014-10-05 14:20:55, Info CSI 0000000e [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:55, Info CSI 0000000f Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000010 [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 00000011 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000012 [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 00000013 [SR] This component was referenced by [l:154{77}]"Package_3_for_KB2959626~31bf3856ad364e35~amd64~~6.3.2.0.2959626-3_neutral_GDR"
2014-10-05 14:20:55, Info CSI 00000014 Hashes for file member \??\C:\Windows\System32\termsrv.dll do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000015 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000016 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:22{11}]"termsrv.dll"; source file
in store is also corrupted
2014-10-05 14:20:55, Info CSI 00000017 [SR] Verify complete
2014-10-05 14:20:55, Info CSI 00000018 [SR] Repairing 1 components
2014-10-05 14:20:55, Info CSI 00000019 [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:55, Info CSI 0000001a Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 0000001b [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 0000001c Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 0000001d [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 0000001e [SR] This component was referenced by [l:154{77}]"Package_3_for_KB2959626~31bf3856ad364e35~amd64~~6.3.2.0.2959626-3_neutral_GDR"
2014-10-05 14:20:55, Info CSI 0000001f Hashes for file member \??\C:\Windows\System32\termsrv.dll do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000020 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000021 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:22{11}]"termsrv.dll"; source file
in store is also corrupted
2014-10-05 14:20:55, Info CSI 00000022 [SR] Repair complete
Since it's the first time I use this tool I'm not familiar with this log file, but what I managed to figure out from it is that termsrv.dll is corrupted and windows cannot repair it for some reason.
My question is:
How can I repair this file? Is this even the problem preventing me from connecting to this computer via Remote Desktop?
Here's a link to my original question which contatining the images.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/cannot-use-remote-desktop-host-on-windows-81-pro/e4776239-4d9e-4934-ae2d-b87cc09f7ade

managed to figure out from it is that termsrv.dll is corrupted and windows cannot repair it for some reason.
So, the next step supposedly is
using DISM.
Coincidentally I reached that page last night from
this one, which I thought gave me a better awareness of how much manual repair might be possible. E.g. maybe the WinSxS isn't quite as fragile as we are being led to believe? (It's making me feel sort of like how I used to feel about the
registry when seeing all the caveats about using RegEdit before I got used to that tool.)
Advanced guidelines for diagnosing and fixing servicing corruption
http://technet.microsoft.com/en-us/library/ee619779(v=WS.10).aspx
Something else that I became aware of yesterday serendipitously is SxStrace.exe. I have never seen it used but it sounds useful. E.g. perhaps easier to interpret for supplemental clues than the ProcMon trace that I usually advocate.
Or perhaps use both and see in ProcMon when the SxStrace is writing. E.g. filter with Operation Is WriteFile.
However, what I would do first is find out what the state of your system is regarding that module. E.g. try this Powershell pipeline to list what you have.
PS C:\windows> dir -R -Fil "termsrv.dll" | sort-object FullName | ft Length, FullName -AutoSize
Note that I am giving you the whole command line, including prompt to show where the command should be started from.
C.f. another thread where doing the same diagnostic procedure seems to be finding more a problem with the Windows Update software than with the user's WinSxS cache.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_store/windows-81-store-error-0x80070002-comprehensive/2b0ed3e1-1835-4517-97dd-0a7abb6ef74c?page=3#LastReply
HTH
Robert Aldwinckle

How do I remove an old phone number from my macbook imessage. My apple ID does not show the number anymore but I cannot remove it from the imessage accounts. Its driving me mad !

Can someone please help me to remove an iphone telephone number from my imessage application. I no longer have a phone which I registered on my apple ID as a second phone. I have been on my apple ID and it does not seem to be there but cannot remove it from imessage, which still has it as an option to connect to. I am concerned that someone else who inherite this old phone will see my messages if I accidentally enable it again. I have read and re-read various postings and tried all options given but no luck, the **** thing stays there.....

Hey Chappers64!
Here is an article that will help you with this issue:
iOS: Deactivating iMessage
http://support.apple.com/kb/ts5185
If you have already tried these steps, you will want to utilize the information at the end of the article:
If you can't deactivate iMessage after you perform the steps above or you can't access the iPhone, please contact Apple Support.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Error while executing the Job:Cannot assign NULL to host variable 1

Hello!
I have the following issue:
Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details)
Note 1362138 - Rule generation - null pointer exception virsa_cc_rtmap doesn't me. After uploading files of ZCC_DOWNLOAD_SAPOBJ and ZCC_DOWNLOAD_DESC I got the same problem during job running...
How can I find out where is the problem?

Hi
That looks like your fields are disabled but they could still be causing the problem edited ( nah - talking rubbish as you've put dummy " " in there) edited - the 'null' error caused many background jobs to fail but, once we had the evidence to show the space (somebody had pressed enter instead of delete/backspace to clear the entry) it stopped the problem - just a bit of learning on the job which we all go through for the GRC chaps in KL.
A " " would be valid but a (I know you can't see it but it's there wouldn't be )
edited.When you did an edit/replace did it say it had replaced anything please?edited
The word doc option does sound good!
Cheers
David
Edited by: David Berry on Nov 4, 2010 7:33 PM

Cannot remove non-connected host through webtool

Similar Messages

Maybe you are looking for