Cannot reopen project in Logic X after it crashed.

I was working on a project when Logic X crashed. Now if I try to open the project it just gets stuck while trying to load the track data. Is there anything I can do to remedy this? I am using Automap and Arturia Spark if that makes any difference. I seem to be having a lot of issues with that third party software.

The chances are it's Automap and the way it wraps plugins..that caused the crash.... as it's known to be somewhat unstable in certain situations currently. Make sure you have checked the "64bit friendly" option in Automap's preferences... as that might help. Also make sure you are using the latest versions of all your plugins including Automap and Spark
As to how you might resolve your current issue....
You can try and use LPX's Selective Track Import (STI) feature to recover most of your data from your project and put it in a new project... and at the same time it will allow you to identify which track/plugin is the source of your issue if you import one track at a time.
See the following video for more info
http://support.apple.com/kb/VI255
Note: The video is for LP9 but STI works much the same in LPX as it did in LP9

Similar Messages

  • AE Project will not open after program crashed

    AE project will not open after program crashed. I tried opening the project inside another project so I could at least get to the sequences but it would not load. Nothing seems to open the project. I can create new projects. I am on PC

    Well, bad news for you: It's a goner. Simply write it off and re-create it and next time learn how to work safely.
    Work File Safety | Mylenium's Error Code Database
    Mylenium

  • Cannot activate with my serial number after Harddisk crash

    My harddisk crashed, I installed my dreamweaver MX2004 from my orginal disk.
    I entered my serial No. - but activation didn't work.
    I tried to activate by phone - not successfull, phone no. doesn't exist.
    Is there a german telephone number for activating this product?
    Thanks for urgent help - and sorry for my bad english
    Anga

    THANK YOU!!!!! Seems to work J
    Best regards
    Annette Gallas
    Von: Dave Merchant [email protected]
    Gesendet: Samstag, 20. Juli 2013 15:39
    An: webhexe
    Betreff: Cannot activate with my serial number after Harddisk crash
    Re: Cannot activate with my serial number after Harddisk crash
    created by Dave Merchant <http://forums.adobe.com/people/Dave+Merchant>  in Dreamweaver CC - View the full discussion <http://forums.adobe.com/message/5522897#5522897

  • I lost an entire project on Adobe Story after it crashed(even though it was online)

    I had an entire project with summaries, 2 character bios and a 13 page screenplay that I have been working for weeks now and Adobe Story crashed last week and when I opened THAT project was gone, while others weren't. I am a Creative Cloud member and really need help with this. Thank you!

    Can you send your Adobe ID (email that you use to sign in to Story) to agupta at adobe dot com ?
    We'll try to figure out what happened, and find your work.
    Thanks
    Amit

  • I cannot edit project in project server after editing it in project professional

    Hi
    i cannot edit project in project server 2013 after editing it in project professional.
    i.e I created an enterprise project in project server and then edit it with project professional. after i published it to the server and open it with project server, it shows the changes. but when i click on a cell, suddenly the task list and gantt table
    hidden!!
    it happens even if I start a project with project professional.
    I'm the admin user.
    what's the problem?
    Thanks.

    CU means cumulative updates, which are intermediate bug fix packages between SP. The latest CU for Project 2013 was release on September 12th. See reference
    here.
    Can you try to reproduce the bug with
    IE in compatibility mode?
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Cannot change project hierarchy after budgeting

    Can any one please help with this.  I am trying to change the hierarchy of my project but since the project has been budgeted for and released, I get the message that I cannot change project hierarchy.  I have tried reseting the budget but this doesn't seem to be working.  Any ideas on how I can accomplish this?

    You can try the following procedures:
    1. Clear all the budget into 0 ( both overall budget and annual budget)
    2. Run t-code OPSX to reset the "BUDG" flag.
    3. Try to update your project hierarchy again.
    Hope it works.
    Atom

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • I need to copy audio files and projects from logic to an external hard as my MBPis nearly full and my external hard drive has packed up with all my files on it, any suggestions on how do I copy 200GB from my MBP to a new external HD

    I Use logic and back my audio file and projects on an external HD ,this has now packed up . I have all the files in the MBP , but need to copy them to a new external HD, I have only 10GB left on my machine , how do I copy 200GB from my machine to a new External HD.
    any helpful full advice would be appreciated.
    angus

    Yes, just drag and drop them into the drive..
    How long will it take? Hard to say without knowing the type and speed of the drives in question.. and even then it's hard to estimate... but does time really matter?
    The fact you only have 10 Gigs left will/may slow the process down but it wont/shouldn't stop it...
    If needed.. just drag and drop some of the files at a time.. not all of them.
    Remember that copying files doesn't delete them from the original drive... You will still need to delete them yourself after they are copied over and empty the trash....
    However....
    When you saved these projects in Logic (Pro X?) did you save them using the include audio files option?
    If not, then when you move the audio files used in these projects... Logic will not know where they are to reload them........ and that will cause you issues.
    So.. if you didn't...
    I would use this method instead...
    Logic Pro X: Move, copy, and convert audio files

  • Logic 9.1.6 Crashes on launching a project

    Hi
    If someone could help with this I would greatly appreciate this. I am working on a new project which I save as a new file each time I make a major change to the project. Anyway, I was getting a system overload/slow disk message quite frequently so I deleted some hidden unused tracks and merged some into loops and saved again. I then closed logic, rebooted and now each time it loads that project it loads and then CPU spikes to 100% and crashes. I have tried opening other projects but it's set to open the last project. I have moved the system preference file to the desktop so that it re-writes it but nothing is working. I cannot open any project in logic now. On the project I had 10 drum tracks (audio files) an esp, exs24 and Xfer Nerve. That's it.
    Anyone any clues?
    I am using an intel iMac with i5 processor, 8gb of ram, a 7200rpm hdd with plenty of space. I really have no idea now how to fix and I'm worried I have lost a project I have spent hours on.
    Would be most grateful if someone could help me out
    Thanks

    Hi guys, I fixed this. If anyone has a similar problem, the solution is to retrace your steps and undo. Basically, the last thing I did before saving was bounce two kicks and an accent kick together in a loop and the files must have been corrupt so I deleted them and the project now opens. Pheww!!! ;-)

  • CS4 Encore cannot open project

    Why after creating a CS4 Pro project, Dynamic Link to Encore shows error "Cannot open project; The folder for this project cannot be found?

    This forum is for "current" Premiere Pro
    PProCS4 = http://forums.adobe.com/community/premiere/premierepro_previous?view=all
    Encore = http://forums.adobe.com/community/encore

  • "Safari quit unexpectedly" Error message. I cannot reopen Safari at all

    I can no longer open Safari.  Get error message "Safari quit unexpectedly" I cannot reopen Safari.  Read article on removing malware and removed tuneupmymac, still can't open

    If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
    You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the linked support article, you may also need to remove this file in the same way:
    ~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
    After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

  • Cannot open project. Just got an error message that says:  '  project contained a sequence that coul

    Cannot open project. Just got an error message that says:  '  project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated witht his sequence type. "  how do I navigate this and reopen my project. ( note: I recently transitioned from the 30 day free trial to 'buying in' to the license cloud application; if that has relevance....)

      FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4,  apple engineers have tried multiple things including operating system with no success

    safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4,  apple engineers have tried multiple things including operating system with no success

    There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long.  Many of us have experienced difficulty connecting to banking and other secure sites.  On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome.  The problem started after the installation of 10.7.4.  I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

  • Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error.  Checked and no yellow triangles, music on computer,  any ideas.

    Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error.  Checked and no yellow triangles, music on computer, and all resources on computer,  any ideas??

    Hi
    And
    • free space on Start-Up hard disk ? How Much ?
    • Brand and type of DVD used
    • Burn Speed ?
    • Did You try to first do a "Save as a DiskImage" ? If so - Did it work ?
    Yours Bengt W

  • Cannot open project: the folder for this project cannot be found cs4

    I am using Encore CS4  and I get the error "cannot open project: the folder for this project cannot be found"
    Having searched the forums I can not find a solution for when the project folder has been deleted.
    Can someone tell me the solution to this issue.

    If you deleted the Encore directory, you cannot fix this.  You'll have to start over.
    Encore creates this folder structure:
    Root or some other Folder
    MyProject.ncor (the Encore project FILE)
    MyProject (the Encore project directory)
    Other Folders for the Encore project (e.g. Cache, Sources)
    You can get the "the folder for this project cannot be found"  in various ways.
    There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name.  You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
    Folder was renamed.  If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
    Encore project file was moved - or Encore directories were moved.  If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
    If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone.  While many of its instructions are inside the project file itself, many are not.  Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

Maybe you are looking for