Cannot see more than one shared virtual disk at a time

I have multiple virtual disks configured and as I add them to the specific virtual machine im using it modifies the vm.cfg as follows:
disk = ['file:/OVS/running_pool/110_openfiler/System.img,hda,w',
',hdc:cdrom,r',
'file:/OVS/sharedDisk/openfiler-ocs-u01.img,hdd,w!',
'file:/OVS/sharedDisk/openfiler-ocs-u02.img,hde,w!',
'file:/OVS/sharedDisk/openfiler-SAN-test.img,hdf,w!',
when the machine boots up the contents of /dev only contains the shared drive hdd, thus I cannot see hde or hdf.
One thing I tried was to edit the vm.cfg after adding the shared drives to the machine to mimic:
disk = ['file:/OVS/running_pool/110_openfiler/System.img,hda,w',
',hdc:cdrom,r',
'file:/OVS/sharedDisk/openfiler-ocs-u01.img,sda,w!',
'file:/OVS/sharedDisk/openfiler-ocs-u02.img,sdb,w!',
'file:/OVS/sharedDisk/openfiler-SAN-test.img,sdc,w!',
This allows me to see all three drives when I issue fdisk -l
Disk /dev/hda: 105.2 GB, 105226698752 bytes
255 heads, 63 sectors/track, 12793 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 13 104391 83 Linux
/dev/hda2 14 12539 100615095 83 Linux
/dev/hda3 12540 12793 2040255 82 Linux swap / Solaris
Disk /dev/sda: 20.9 GB, 20971520512 bytes
255 heads, 63 sectors/track, 2549 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 2550 20480000 ee EFI GPT
Disk /dev/sdb: 20.9 GB, 20972569088 bytes
255 heads, 63 sectors/track, 2549 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 2550 20481024 ee EFI GPT
Disk /dev/sdc: 104.8 GB, 104857600512 bytes
255 heads, 63 sectors/track, 12748 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 12749 102400000 ee EFI GPT
but then my question becomes... could this cause any potential problems?

I found that there are 4 IDE disks and 7 SCSI disks at most for HVM guest on Oracle VM 2.1 version. For IDE disks, The available disknames are from hda to hdd; and for SCSI disks, are from sda to sdg. you may make test about it. :)
Message was edited by:
Changhai

Similar Messages

Scoring question - how do I see more than one instrument's voice at a time?

I'm trying to compose pieces for different symphony orchestra instruments, but its imossible to toggle back and forth between the matrix view of seperate tracks for arranging the voices of the chords. The only way I can seen the notes in a chord is double click in the matrix view of individual track, but it just piles everything into one view and you can't manipulate it in any sensible way I can figure out.
Please, someone tell me that there is a way to see each instrument laid out at once for arrangement in the score view somehow (I still can't seem to get more than one to come up at a time).

Mortal Portal wrote:
Please, someone tell me that there is a way to see each instrument laid out at once for arrangement in the score view somehow (I still can't seem to get more than one to come up at a time).
i'm not exactly sure if this is what you mean, but if you want to see multiple instruments in the score view, just clicking anywhere on the "paper" brings up all the instruments used. if you want to see each single instrument come up in the score view, i think, like the previous person said is a matter of arranging the windows in the specific screenset, and having an Arrange and Score or Arrange and Matrix so that you can click on the regions and they'll come up on the other screen.
Make sure you save and/or lock your screensets.

I cannot see more than one recipient in the To or CC field

My iPad is only showing one recipient on received emails despite being able to see multiple recipients on the same email when I view on my laptop. I've rebooted, deleted accounts and set them up again and done a restore but its the same. I have compared screens to a colleagues iPad on the same email he can see all the recipients but I only see one.

I figured it out. I needed to fix some errors in my account information. It works fine now.

Cannot have more than one Mobile item for a person

Hi,
I cannot have more than one mobile phone item for a person. In India some of them carry dual SIM card phones and both will be valid. In Lumia 800, I dont see an option to add two mobile items. I can do with a work around by choosing one mobile item with Windows Live Account and another with Google Account. But then that is not the right way to do it. If I need it both on same account, then I cannot do it.
This feature is available in all the Android phones. Also i am facing another issue is that Lumia 800 does not sync any mobile item #2 of Google account, so I have to go to Google and manually add that phone number to my phone, which is painful.
Hope Microsoft is listening.
But I really like the way the facebook, SMS and all other chat are sync'ed in one place.
Regards,
-Srinivasan.

The wierd thing is they have duplicates for Home/Work but not for Cell. I have the odd contact that has two cell phones. Really only two work arounds, use one of the other available types as a secondary cell number or what I do is create two contacts, one in Exchange and one on Live. Since my main account is Exchange, I put the secondary number in the Live contact, then on the phone I link the two together. This way I see two cell numbers for one contact.

After i downloaded Firefox 7, I cannot open more than one page at a time. I have done everything you suggested about ad-on, etc. Other people are having problems. Can I get reall help with this or should I just reload Firefox 4?

Firefox 7 is a dud. Cannot open more than one tab at a time, will not open additional pages. Nothing you suggested has worked.
Can I take down Firefox 7 and reload Firefox 4?
I need to talk with a live person! I am real disappointed with this.

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

Cannot add more than one reminder, add new list, to reminder app in iOS 7.1, app crashes a lot

Default iOS reminder app: Cannot add more than one reminder, cannot add new list, after updating to iOS 7.1. The app crashes frequently on editing or just by pressing return..

Hello Kyem22,
Thank you for providing the details of the issue you are experiencing with the Reminders app quitting unexpectedly.
The first thing I recommend is quitting and relaunching all the applications on your iPad:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting all the apps, I recommend restarting your iPad and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPad. The Reminders app is not something that can individually be reinstalled, but backing up your iPhone and restoring the iOS software will reinstall the application:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

HT204266 How do I see more than one issue of a magazine at a time in Newsstand on the iPad?

I can only see the most recent issue but I haven't read the last one (or the one before that, etc.). I want to see them for as long as it takes to read them.

Mortal Portal wrote:
Please, someone tell me that there is a way to see each instrument laid out at once for arrangement in the score view somehow (I still can't seem to get more than one to come up at a time).
i'm not exactly sure if this is what you mean, but if you want to see multiple instruments in the score view, just clicking anywhere on the "paper" brings up all the instruments used. if you want to see each single instrument come up in the score view, i think, like the previous person said is a matter of arranging the windows in the specific screenset, and having an Arrange and Score or Arrange and Matrix so that you can click on the regions and they'll come up on the other screen.
Make sure you save and/or lock your screensets.

Since downloading the iOS on my iPad, I cannot download more than one pdf from mail to iBooks. I have to shut down y iPad and start again. Any suggestions?

Since downloading iOS on my new iPad, I cannot downlaod more than one pdf from mail into iBooks. I have to shut down my iPad and restart it to save a second pdf. Wasn't a problem with the old operating system. Any suggestions?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

HT6114 I cannot select more than one message at a time to delete from the trash. Any ideas will be appreciated

I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?

This works in many different ways and in lots of apps.
Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them.

ORA-01776: cannot modify more than one base table through a join view

I have created EO based on a database view than consists of two tables, and only one is updateable.
When I try to update a row using EO, I got a following message: "ORA-01776-cannot modify more than one base table through a join view"
In Forms, this issue is resolved by setting "Query Only" property of non-updateable items to "True".
Is it possible to do something like that in ADF BC?
Thanks

Thanks for answer.
When I set "updateable" property to "Never", that attribute is protected from any change.
I'm sorry for incomplete usecase.
I have set up a list of value on that attribute, because it is a lookup field for another table and I need to get an ID from that table.
Basically, I need that attribute to be updateble for BC, but not for database.
Edited by: MarioK on Oct 13, 2011 9:28 AM

Cannot modify more than one base table through a join view

hi guys, my current problem is that i have a datablock based on a view, now all the fields bar 1 are updateable, but this one field that is obtained through a join is displayed, the user can enter data in this field which then pupulates other fields which are required, but this specific field should not be updated. Is there an option to state this as i keep getting the error:
cannot modify more than one base table through a join view
Any help would be greatly appreciated, thanks.

the user can enter data in this field which then pupulates other fields So, using the value of "this field" you then query the rest of the fields? Can you show us the code you use to populate the rest of the fields?
but this specific field should not be updatedHave you tried setting the "Query Only" property of the field to "Yes" and the other DML properties (Ins, Upd, Del) to No?
Also, what is your Forms version?
Thanks,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

Two thoughts:
1. You never need to open any emails in the junk mailbox. You can simply do Mailbox > Erase Junk Mail from Mail's menu.
2. What happens if you hold the shift key after highlighting the first in a series of emails, then click the second one with the shift key depressed? That should hightlight both.

In Apple Mail, I cannot add more than one address to the "To" line

In Apple Mail, I cannot add more than one address to the "To" line by typing just the initial

HHow are you. Trying to add the second address? Normal procedure after the first address is to type a comma, then start typing the name for the second address.

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

Cannot see more than one shared virtual disk at a time

Similar Messages

Maybe you are looking for