Cant see the fields in 2LIS_03_BX

when i go to RSA5 and see the datasrc 2LIS_03_BX i can see only some of the fields but when i double click on the strcuture MC03BX0 I can see so many fields how can i want to use some of the fields which i can see in the strcuture MC03BX0 in my datasrc ,how can i do this

Hi,
You have to use a program1 to modify the ROOSFIELD table entries where OLTPSOURCE = 2LIS_03_BX and OBJVERS = 'A'. The fields should have value SELECTION ='' if they want to be avialable in BIW.
I hope SAP has only given most common and important fields as fields of DS  . And otehr fields are hidden.
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • T-code FAGLB03 drilldown to document level cant view the field cleared/open

    Hi everyone,
    It is my first time to post a thread here.
    Currently i using ECC 5.0 GL Balance displayed through FAGLB03:
    when i drill down to documet level and i need to create my own layout i cant see
    the field "cleared/open items symbol". But if i using  t-code FS10N, when i drilldown to document level i can select the field "cleared/open items symbol", or
    i can select local currency3.
    hope anyone can help on this

    Hi Christoph
    thank you to reply my message,
    Support package is upto 5 in our company. Below is our package information :-
    EA-APPL             500   0005     N       SAP R/3 Enterprise PLM, SCM, Financials
    EA-DFPS             500   0005     N       SAP R/3 ENTERPRISE DFPS
    EA-FINSERV     500     0005     N       SAP R/3 Enterprise Financial Services
    EA-GLTRADE    500     0005     N       SAP R/3 Enterprise Global Trade
    EA-HR             500     0005     N       SAP R/3 Enterprise HR Extension
    EA-IPPE             300     0004     P       EA-IPPE 300: Add-On Installation
    EA-PS             500     0005     N       SAP R/3 Enterprise Public Services
    EA-RETAIL        500     0005     N       SAP R/3 Enterprise Retail
    P          2004_1_500     0014     P       PI 2003_1_470 : Add-On Delta Upgrade
    PI_BASIS     2005_1_640 0010     X        Basis Plug-In (PI_BASIS) 2005_1_640
    SAP_ABA              640  0009     S        Cross-Application Component
    SAP_APPL        500     0005     R        Logistics and Accounting
    SAP_BASIS       640     0020     S        SAP Basis Component
    SAP_BW              350     0009     W       SAP_BW 350
    SAP_HR              500     0005     R        Human Resources
    ST-A/PI  01I_ECC500     0000     C        Application Servicetools for ECC 500
    ST-PI     2005_1_640     0005     X        SAP Solution Tools Plug-In
    VIRSANH     510_640     0000     C        RTA 5.1 Installation package for HR and
    If my company using package 5, so can we apply this note 862523 ? when i refer this note in our system didnt exist this 2 report which are FAGL_CORR_0001  and FAGL_CORR_0002  , how can i apply this ?
    Hope you can guide me on this . thank you

  • Multiscreen HTML 5  output  in Chrome – when scrolling down very long topics in the content pane the navigation area 'moves up' , i.e cant see search field or TOC.

    Hi,
    Multiscreen HTML 5  output  in Chrome – when scrolling down very long topics in the content pane the navigation area 'moves up' , i.e cant see search field or TOC.
    thanks
    Anat 

    This is by design. If you want to change this, the content section must have a set height and scroll. Which layout are you using? -- Check out the Responsive layouts and the Social layout. I believe those have the more traditional TOC placement.
    Kind regards,
    Willam

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • HT204291 Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

    Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks

    Is this a movie from iTunes? If so is it a rental or one you've purchased?

  • I cant see the airplay icon on mi iphone 3gs

    i cant see the icon of airplay on my iphone 3gs i have a iphones 3gs wiht ios 5.1.1 i will like to use the airplay betewm mi iphone 3gs and my itunes on my pc , please help me with this NOTE I dont have a Mac i have PC with W7 but i read that is posible plesase help me , and itunes dont show me the icon , when i had a 3g he show me the icone but i cant see it 

    This is from the "Troubleshooting AirPlay" article:
    Resolution
    If the AirPlay icon doesn't appear
    Check for the AirPlay icon ( ) in the recently used apps section on your iOS device, or in iTunes on your computer (as in these articles about how to use AirPlay and how to use AirPlay Mirroring). The icon will only appear if your device or computer is logged onto a Wi-Fi network which has an AirPlay-enabled recipient, such as Apple TV (2nd generation or 3rd generation).
    If you are still unable to see the AirPlay icon, try one of the following steps:
    Verify that your AirPlay-enabled devices have the most up-to-date software or firmware.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    Verify that all your AirPlay-enabled devices are logged on to the same home Wi-Fi network (check the home network names on your devices to confirm).
    If trying to AirPlay, or AirPlay mirror, to your Apple TV (2nd or 3rd generation), ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay
    Check Internet or network connectivity on all affected devices.
    Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information). 
    The entire article is at http://support.apple.com/kb/TS4215

  • I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

    I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

    Hi Shlomi
    It worked!!! Thanks so much, I've been messing about with this for hours.
    As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
    Any thoughts you have would be much appriciated
    Rob

  • I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    YOU can't fix it.  But you can bring it in to Apple for an out of warranty replacement for $199.

  • I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
    You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
    If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

  • LSMW Recording.. Cannot see the fields when going to Field mapping step

    Hi all,
    I am going a test loading of data with the LSMW and I am doing with a recording.  The transaction I have used is related to my company. 
    When I go to the field mappings step I dont see the field for the target structure with which I can map the source fields..
    What may be the problem.  Let me know.. If my question is solved, I will award appropirate points.
    Thanks,
       -Ken

    Hi Consu,
    Please see, when your recording is over.. it is displayed right?
    The moment it is displayed, there on same screen either click on 'DEFAULT ALL " button on application toolbar or go to menu path edit--> default all.when u create recording u can click on this button but when it is assigned to your project , this option become disabled , so crate a new recording and follow above steps.
    Best of luck
    Thanks,
    Billy

  • My itunes screen is black and i cant see the writing how do i change the colour

    My itunes screen is black when im trying to find music - how do i change the colour as i cant see the writing

    With that one, perhaps try Drgoo's suggestion from the following post:
    Re: Itunes Store - ALL Text Black/Cant See Anything

  • In smartform editor cant see the option for making bold or italic

    hi EVERYONE,
    I Want to make a heading as BOLD but on my editor i cant see the option to make it as a bold
    i have given the SMART STYLE....i can see all the styles in my style but when i come to TEXT and write a heading...when u want to make it as a bold the editor does bot give me the options.
    how can i make it or what settings do i need to do to get the options.

    HI SRIDER,
    CAN YOU BE LITTLE MORE CLEAR PLS?
    I HAVE EX : doc no AS MY HEADING.
    I want to make DOC NO as bold
    i have in my editor like is
    Document no so how can i make it bold?
    thank you,
    pasala.

  • Cant see the native groups on the forms and reports

    We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
    We did the migration for test environment, but didnt encounter this issue.
    For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
    I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
    We brought over the schema, migrate and register the applications, but the problem still persists.
    Has any one encountered issue like this, I would, I would really appreciate any suggestions.
    thanks

    Thanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
    When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
    Any idea would be highly appreciated.
    thanks

  • Cant see the document canvas just grey background

    CANT SEE THE CANVAS PS4 ?just built a new pc and my ps4 (previous hdd ) runs fine ( so the mob and video card seem all good ). I created a new os on a new hdd and installed ps4 everything seems fine but cant see the canvas , can draw on it but just see the grey backround ( i  can see it creating in the layers pallet). Illustrator works fine ..please help

    If all else fails try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
        A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Cant see the hp printer icon in the my computer box below the icons of the drives c and d

    cant see the hp printer icon in the my computer box below the icons of the drives c and d

    Hi Sukanto,
    Welcome! I didn't think this was something you see there anyway, I could be wrong. What operating system to you have?
    Can you see the printer icon in control panel? Let me know if you need help to answer these questions.
    Cheers,
    KidA
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for