CatOS and removing a vlan from its VTP server..

Hi guys
Question I hope can be cleared up very quickly.
I have a pair of old switches running CatOS, these are also VTP servers for the network running off em..
I need to de-comission a Vlan but cannot figure out the best way to remove the vlan from them?
Obviously,
IOS I would just
conf t
no vlan xx
end
But I cannot for the life of me find the best way to do this on CatOS...
Ive found that it may be a "clear vlan xx" command, but not sure..
Any ideas?
Thanks,
-Graham
Please note: My comments are simply suggestions. I cannot be held liable for any loss of data, life or marbles due to following my instructions.
Technical Design Engineer
IMsupporting.com - Live chat software

Doesnt that just remove the vlan from the port?
Ideally I want to remove the vlan completely from the system? ( Its a VTP server too )
Ie:
conf t
no vlan xx
end
Would do it on cisco IOS..
would
conf t
clear vlan xx
end
do it on catos?
Thanks
Graham

Similar Messages

How can I remove an image from its background and save it? (Photoshop cs6)

Hello,
I am very new to the photoshop world and am trying to remove an image from its background ( as a stand-alone) and save it. Is there a way to do this in Photoshop CS6? I have looked at tutorials but only found how to remove the image but not how to save the image as a stand alone with no background.
Any help would be appreciated
Erika

Hi Erika,
Are you trying to save a portion of an image with a transparent background? It may help to post a screenshot of the image that you're working with as well as your layers panel.
I've included a few tips below that may help you with your situation. If you need additional help, please feel free to post again
Deleting a background and saving an image with a transparent background
1. Here I am working with an image of a santa hat that I've cut out from a white background. I have two layers, the cut-out santa hat and the original file. I'm going to delete the background layer so that I have just one layer - the cut-out santa hat:
2. You'll see that a checkerboard pattern has appeared behind the santa hat. This means that the background is transparent.
3. You can then go to File > Save As... and select PNG, Photoshop PSD, or TIFF from the Format dropdown menu. These file formats will save the cut-out portion of your image on its own, while preserving the transparent background.

I was updating my software on my iphone 4 and it crashed so it recovered it and i restored it from its back up. However I have lost all my music and my apps but not my pictures. How can i get my music back and apps back?

I was updating my software on my iphone 4 and it crashed so it recovered it and i restored it from its back up. However I have lost all my music and my apps but not my pictures. How can i get my music back. I did not remove my phone from the computer until it had said it had finsihed.

Media and apps are not part of the backup. They need to be re-synced from your itunes library or re-downloaded from the store.

"Lightroom encountered and error when reading from its preview cache and needs to quit"

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
Your thoughts?
--Kenny Brandon Wilson

Talked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
Gokul: Click on start and type %appdata%, then open roaming folder.
Edward: ok
Gokul: Open Adobe folder.
Gokul: Open Lightroom folder.
Gokul: Open Lightroom folder> Preferences.
Edward: ok
Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
Edward: OK
Gokul: Please check if you can launch Lightroom without any error.
Edward: it shows me a welcome screen and is asking me to select my country
Edward: aka, register the software
Gokul: You can skip and launch it.
Edward: LR catalog not found
Gokul: Please select the catalog.
Edward: my original catalog?
Gokul: Yes.
Edward: testing integrity of catalog
Edward: loaded just fine
Gokul: Okay.
Gokul: Please check if you can re-launch it again.
Edward: yes, it worked!
Gokul: Excellent!
Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
Edward: aha....ok
All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month!

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

How can I find and remove duplicate photos from my computer?

How can I find and remove duplicate photos from my computer?

Terence,
Yes, the duplicates appear in the iPhoto window. I have folders with same name occuring two or even three times sometimes with exactly the same set of photos (ie photos with the same ID) and sometimes with a limited set of photos. Other folders appear only once.
I normally take my MacBook with me if I'm shooting a lot of photos, such as on holiday, and then want to transfer them to my iMac when i get home. Other times I transfer the camera's memory stick directly to my iMac.
I have great difficulty transferring the photos from my MacBook to my iMac. I don't want to store my photos on my iDisk due to the length of time it takes to upload them.
Thanks again.
Simon

Kill a thread and remove the element from the vector

Hi All
I have attached each Vector element to a thread which I later want to kill and remove that element from the Vector.
Thread.join(milliseconds) allows this functionality to let the thread die after n milliseconds.
However, I want to delete this element from the Vector now.
Can someone please throw some light on this?
Here the code I have written for this:
try
     System.out.println(counter);
     int xCoord = generator.irand(25,200);     // X-coord of AP
     int yCoord = generator.irand(25,200);     // Y coord of AP
     listMN.addElement(new MobileNode((int)mnId,new Point2D.Double(xCoord,yCoord)));
     listMNcoords.addElement(new Point2D.Double(xCoord,yCoord));
     for(int i=0;i<vnuBS.returnBSList().size();i++)
          if(vnuBS.returnBSListCoords().get(i).contains(xCoord,yCoord)&&(vnuBS.returnBSList().get(i).getChannelCounter()<=3)&&(vnuBS.returnBSList().get(i).getChannelCounter()>0))
               double c = exponential() * 10000;
               long timeToService = (long)c;
               System.out.println("BS "+vnuBS.returnBSList().get(i).id+" is connected to MN ");
               vnuBS.returnBSList().get(i).reduceChannelCounter();
               System.out.println("Channel Counter Value Now: "+vnuBS.returnBSList().get(i).getChannelCounter());
               mobileNodesThread.addElement(new Thread(listMN.elementAt(mobileNodeCounter)));
               mobileNodesThread.elementAt(mobileNodeCounter).setName(mobileNodeCounter+"");
               mobileNodesThread.elementAt(mobileNodeCounter).start();
               mobileNodesThread.elementAt(mobileNodeCounter).join(100);
//                              System.out.println("Died");// thread dies after join(t) milliseconds.
               System.out.println("ListMN getting generated : " + mobileNodesThread.get(mobileNodeCounter));
          else if(vnuBS.returnBSListCoords().get(i).contains(xCoord,yCoord)&&(vnuBS.returnBSList().get(i).getChannelCounter()<=0))
               listMN.remove(this.listMN.lastElement());                         //dropcall
               System.out.println("Removed "+mnId);
               removeCounter++;
               mnId = mnId--;
               mobileNodeCounter--;
          mnId = mnId+1;
     Thanks a lot.

I'm not sure if what you are trying to accomplish is correctly implemented.
The method join does not kill the thread. It will wait for the specified time for the thread to exit. If you want the thread to run for a specified ammount of time, develop the run method of that thread with that in mind. Do not try to kill it from the outside, but let it terminate itself (gracefull termination).
Now for your question regarding the vector (you should probably be using ArrayList nowadays): I would implement the observer pattern for this job. Make the threads post an event on the interface when they are done, let the main thread register itself with the threads and synchronize the method that handles the events. In that method you can remove the object from your list.
I'm not sure if you want to use thread anyhow, could you tell us what it is that you are trying to accomplish?

Is there a way to remove an iMac from its base?

Is there a way to remove an iMac from its base, so you can mount it on a monitor arm made for flat panel screens?

Hi,
maybe these instructions can give you a hint http://manuals.info.apple.com/en/iMac24inch_VesaMountAdapterInstallGuide.pdf
Regards
Stefan

[svn:fx-trunk] 12001: Make List itemEditor work with FTETextInput via textInputClass style and remove unused _itemEditor from Tree .

Revision: 12001
Revision: 12001
Author:   [email protected]
Date:     2009-11-19 11:47:24 -0800 (Thu, 19 Nov 2009)
Log Message:
Make List itemEditor work with FTETextInput via textInputClass style and remove unused _itemEditor from Tree.
QE notes:
Doc notes:
Bugs: SDK24172
Reviewer: Gordon
Tests run: checkintests, list tests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/List.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Tree.as
    flex/sdk/trunk/frameworks/projects/spark/MXFTEText.css

This is a duplicate post. This should be locked to avoid further confusion.
My CSS wont change
Nancy O.

[svn:osmf:] 16975: Fix bug FM-964, add media factory item for RTMFP multicast and remove the item from OSMFPlayer

Revision: 16975
Revision: 16975
Author:   [email protected]
Date:     2010-07-19 15:20:00 -0700 (Mon, 19 Jul 2010)
Log Message:
Fix bug FM-964, add media factory item for RTMFP multicast and remove the item from OSMFPlayer
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-964
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as
    osmf/trunk/framework/OSMF/org/osmf/media/DefaultMediaFactory.as

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
    width: 220px;
    left: 180px;

Search and remove subscribers manually from BC

I am wanting to remove several subscribers from multiple email lists.
Is this possible without having to scroll through countless pages from a variety of lists?
We often get around a dozen people who mail in and say 'remove me from your list' as opposed to managing their account.
In order to remove them I have to do the following.
Choose the first email list of many
change drop down display to 50 address
click address column to sort into alphabetical order
scroll through until I find the place where the email would be
if there, delete
if not there, assume its on a different list or they did actually unsubscribe as well as send the email to unsubscribe
With tens of thousands of email addresses and multiple lists, this takes a long time.
Is there a way to simply enter a search, then delete?
The only way I could see at the moment is to export, excel search and delete then re-import. Don't really want to be doing that though.
Many thanks

Hi,
In Admin, go to CRM > Search and lookup the user's e-mail address. Any user subscribing to a mailing list is turned into a CRM Customer. Once you find the contact, open it and go to "Subscriptions" and untick the respective list (all subscriptions will be listed on top, under "Campaign List")
Kind Regards,
Alex

I want to run my itunes from my EHD and remove my music from my computer... How can i make this work?

So i already tranferd my itunes library to my seagate freeagent EHD, and i want to remove all my music from my laptop to free up space. How can i have all my music show up on my itunes when i plug in my EHD?

First, make sure you have really transferred the whole library. If you did this with changing preferences you did not do it right.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Always make sure the drive is on before starting iTunes.

I run windows 7/8 and lightroom 5.7 i am getting an error message and here it is " lightroom encountered and error when reading from its preview cache and needs to quit". I am getting this message repeatly. What do I need to do to fix it.

I run windows 7/8 and lightroom 5.7 I am getting an error message and here it is " lightroom encountered an error when reading from its preview cache and needs t quit" How do I fix this.

THANKS
Hank Wilkinson
Please visit my web site <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
For information on any of these photos please email me or call 612-756-9970

PowerShell script to find and remove duplicate items from document library

Hi Friends,
Please check this below script, It is finding the duplicate items and removing it. This script is not working to find the duplicate items from document
library and remove. Can you please let me know where it is wrong.
Add-PSSnapin microsoft.sharepoint.powershell
$web = Get-SPWeb -Identity "http://zapltvsspdev02:4333/bu/EXCO"
$list = $web.Lists["AECI Documents"]
$AllDuplicates = $list.Items.GetDataTable() | Group-Object INumber | where {$_.count -gt 1}
$count = 1
$max = $AllDuplicates.Count
foreach($duplicate in $AllDuplicates)
$duplicate.group | Select-Object -Skip 1 | % {$list.GetItemById($_.ID).Delete()}
Write-Progress -PercentComplete ($count / $max * 100) -Activity "$count duplicates removed" -Status "In Progress"
$count++
Remove-PsSnapin Microsoft.SharePoint.PowerShell
Note:
In the above code, duplicates are found using the "INumber" column.
valmiki

check this
http://stackoverflow.com/questions/21337158/delete-duplicate-items-in-sharepoint-list

PS script to disable users / Audit and remove Groups / Hide from GAL have bits but need to put it together

Hi All
I am trying to get a script together to run against a specific OU (our disabled Users OU) to make the process of leavers more automated.
I am trying to achieve the 4 main outcomes below
1. Disable User account
2. Hide from GAL
3. Export users group membership to a file based on SamAccountName
4. Remove users from all groups except domain users
I have some parts of this working from other peoples scripts i have found on the web but need to tie it all together which is proving to be beyond my basic scripting ability
Below is what i have so far, this does disable users / hide from GAL and remove groups however as stated i would really like it to export the group membership to a file before removing them so i have a record should a mistake be made.
$users= get-aduser -Filter {(Enabled -eq "True")} -SearchBase "ou=Disabled Accounts,dc=test2k8,dc=local"
Function RemoveMemberships
param([string]$SAMAccountName)
$user = Get-ADUser $SAMAccountName -properties memberof
$userGroups = $user.memberof
$userGroups | %{get-adgroup $_ | Remove-ADGroupMember -confirm:$false -member $SAMAccountName}
$userGroups = $null
$users | %{RemoveMemberships $_.SAMAccountName}
ForEach ($user in $users)
set-aduser -identity $user.sAMAccountName -Enabled $false -replace @{msExchHideFromAddressLists=$true}
exit
If there is anyone here that can help i would be very grateful
Many Thanks
Nick

Try this:
$Users = get-aduser -Filter {(Enabled -eq "True")} -SearchBase "ou=DisabledAccounts,dc=test2k8,dc=local"
Function Remove-GroupMembership
[CmdletBinding()]
param
[parameter(ValueFromPipeline=$true)]
$Identity
process
if ($Identity -is [string] -or !$Identity.memberof)
$Identity = Get-ADUser $Identity -properties memberof
Write-Verbose -message $Identity.samAccountname
foreach ($Group in $Identity.memberof)
Write-Verbose $Group
Remove-ADGroupMember $Group -confirm:$false -member $Identity
$Users | Remove-GroupMembership -verbose 4> c:\users\mmcnabb\desktop\groups.txt
forEach ($User in $Users)
set-aduser -identity $user.sAMAccountName -Enabled $false -replace @{msExchHideFromAddressLists=$true}
It uses the verbose stream to redirect the groups out to a text file of your choice. Please note this is untested so please use with caution.

CatOS and removing a vlan from its VTP server..

Similar Messages

Maybe you are looking for