CC&B to DOC1
Hi,
Can you please help me to understand how Does CC&b will be interfaced with DOC1 (external billprint provider)?
where can i get the technical help for the same?
Regards,
Priya
it would be really great if u can mail in detail as i am completely new to CC&B.
I am not getting how to implement the same.First thing what you should do is to download CC&B Documentation from here
Does CC&B would behave like same when interface with DOC1??No, CC&B will just output the bill extract in a flat file.
DOC1 will read/interpret the file.
Similar Messages
-
Copy from Doc1 and paste in Doc2
HI ALL,
Requirement:
My requirement is copy all pageitem from Source Document(doc1) and paste in Target Document(doc2).
[Note: doc1 contains many pages]
Trying Code:
It will paste Ist page only. Not repeated for next process.
var doc1 = app.documents[0];
var doc2 = app.documents[1];
for(i=0; i<doc1.pages.length; i++)
//var myPages = Pages[i]
//alert(Pages[i])
doc1.pages[i].pageItems.everyItem().select(SelectionOptions.ADD_TO);
app.copy ();
app.activeDocument = doc2;
app.pasteInPlace ();
Kindly check and advise.
Thanks in advance
BEGINNERTry something like this:
var doc1 = app.documents[0];
var doc2 = app.documents[1];
for(i=0; i<doc1.pages.length; i++)
if(doc2.pages.length < i+1){
doc2.pages.add();
//alert(Pages[i])
doc1.pages[i].pageItems.everyItem().duplicate(doc2.pages[i]); -
Query to return separate rows for date range including NULLs
I'm trying to write a query that will return all customers from table 1. Table 1 also provides a start date and an end date that may be different for different customers. Left join with Table 2 provides all matches and NULL if NO matches.
If there is any match at all, I do not get the NULLs for other dates. There should be a match for each date from start to end. How can I write the code so that my return will loop thru each date and provide the match or NULL?Sorry. I am somewhat new to this and am not sure what you are requesting. I receive a return of all customers with the code below but if customer 1 has a start date of 1/1/15 and a stop date of 1/5/15 and a document exists for 1/1/15 and 1/3/15
I do not receive the rows with NUL for 1/2/15, 1/4/15, and 1/5/15 which is what I'm trying to accomplish. If there is no match at all, I only receive the one row with NULL and I would like to see a row for each date from start to stop.
SELECT T1.IDNumber,T1.StartDate,T1.StopDate,T3.SignDateTime
FROM
Table1 T1
INNER
JOIN Table2
T2
ON
T1.CustID
= T2.CustID
LEFT
JOIN Table3
T3
ON
T1.CustID
= T3.CustID
WHERE
T1.StartDate
> '2015-01-20 00:00:00.000'
AND
(T3.ReportID
IN ('DOC1',
'DOC2',
'DOC3') OR
T3.ReportID
IS NULL)
AND
T2.YesNo
= 'Y' -
GDE - function module.. code .. problem
hi all,
I am extracting data using FM
from PAYR and REGUH.
I need:
Payr
doc1 ven01.........filds.a b c.
doc2 ven02.........filds..
doc3 ven02.........filds..
doc4 ven03.........filds..
My Fm is working fine.
I need from REGUH:
doc1 ven01.........filds p q r..
doc2 ven02.........filds..
doc3 ven02.........filds..
doc4 ven03.........filds..
doc5 ven05.........filds..
doc6 ven06.........filds..
doc5 and Doc6 not there in Payr table. finally i need 6 records with a, b,c, p, q, r
I wrote code:
========
error : It returns dump..
saying : INDEX problem..?
Modify e_t_data index sy-tabix.
FUNCTION z_biw_payr_get_data .
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" REFERENCE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT
*" SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZBIW_AP_PAYR OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: payr.
Auxiliary Selection criteria structure
DATA: l_s_select TYPE srsc_s_select.
Maximum number of lines for DB table
STATICS: s_s_if TYPE srsc_s_if_simple,
counter
s_counter_datapakid LIKE sy-tabix,
cursor
s_cursor TYPE cursor.
*internal tables:
I_payr like payr occurs 0 with header line.
I_reguh like reguh occurs 0 with header line.
Select ranges
RANGES: l_r_gjahr FOR zap_payr-gjahr,
l_r_vblnr FOR zap_payr-vblnr,
l_r_zbukr FOR zap_payr-zbukr.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
please Check DataSource validity
CASE i_dsource.
WHEN 'ZAP_PAYR'.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF.
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' '. "message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_s_if-t_select.
Fill parameter buffer for data extraction calls
s_s_if-requnr = i_requnr.
s_s_if-dsource = i_dsource.
s_s_if-maxsize = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF i_t_fields TO s_s_if-t_fields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'GJAHR'.
MOVE-CORRESPONDING l_s_select TO l_r_gjahr.
APPEND l_r_gjahr.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'VBLNR'.
MOVE-CORRESPONDING l_s_select TO l_r_vblnr.
APPEND l_r_vblnr.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'ZBUKR'.
MOVE-CORRESPONDING l_s_select TO l_r_zbukr.
APPEND l_r_zbukr.
ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
Extracts from Tableu2026..1
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT mandt zbukr hbkid hktid rzawe chect checf laufd laufi lifnr
kunnr empfg ubhkt vblnr gjahr zaldt waers rwbtr strgb pridt
priti prius xmanu xbanc bancd extrd extrt xbukr zanre znme1
znme2 znme3 znme4 zpstl zort1 zstra zpfac zland zregi zbnks
zbnkn zbnkl zbkon voidr voidd voidu checv hbkiv hktiv zpst2
xragl pernr seqnr btznr rec_belnr rec_gjahr zpfor uzawe ichec
irefe rwskt
FROM payr
WHERE zbukr IN l_r_zbukr
AND vblnr IN l_r_vblnr
AND gjahr IN l_r_gjahr.
AND rzawe EQ 'C'.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE e_t_data
PACKAGE SIZE s_s_if-maxsize.
IF sy-subrc <> 0.
CLOSE CURSOR s_cursor.
RAISE no_more_data.
ENDIF.
**get all u2018Du2019 and 2 series VBLNR records from REGUH
_** --- CHECK the codes for WITH CASE 1 OR CASE 2._
Case 1 :
*Select * from reguh*
Into corresponding fields of table i_reguh
For all entries in e_t_data
Where lifnr = e_t_data-lifnr
And rzawe = u2018Du2019
and Vblnr like u20182%u2019.
Or u2026u2026 Or u2026u2026 Or u2026u2026
Case2 :
*Select * from reguh*
Into corresponding fields of table i_reguh
Where rzawe = u2018Du2019
and Vblnr like u20182%u2019.
Loop at e_t_data.
Read table i_reguh with key lifnr = e_t_data-lifnr
If sy-subrc = 0.
E_t_data-laufi like reguh- laufi.
E_t_data-Zbukr like reguh-zbukr.
E_t_data-lifnr like reguh- lifnr .
E_t_data-empfg like reguh- empfg.
E_t_data-vblnr like reguh-vblnr
E_t_data-waers like reguh-waers
E_t_data-srtgb like reguh-srtgb.
E_t_data-znme1 like reguh- znme1.
E_t_data-znme2 like reguh- znme2.
E_t_data-znme3 like reguh- znme3.
E_t_data-znme4 like reguh- znme4.
E_t_data-zpstl like reguh-zpstl.
E_t_data-zort1 like reguh-zortl.
E_t_data-zstra like reguh-zstra.
E_t_data-zpfac like reguh-zpfac.
E_t_data-zland like reguh-zland.
E_t_data-zregi like reguh-zregi.
E_t_data-zbnkl like reguh-zbnkl.
E_t_data-rzawe like reguh-rzawe.
E_t_data-hktid like reguh-hktid.
E_t_data-hbkid like reguh-hbkid.
E_t_data-zpst2 like reguh-zpst2.
E_t_data-uzawe like reguh-uzawe.
E_t_data-pernr like reguh-pernr.
E_t_data-btznr like reguh-btanr.
E_t_data-laufd like reguh-laufd.
E_t_data-zaldt like reguh-zaldt.
E_t_data-rwbtr like reguh-rwbtr.
E_t_data-rwskt like reguh-rwskt.
Modify e_t_data index sy-tabix.
Else.
E_t_data-laufi like reguh- laufi.
E_t_data-Zbukr like reguh-zbukr.
E_t_data-lifnr like reguh- lifnr .
E_t_data-empfg like reguh- empfg.
E_t_data-vblnr like reguh-vblnr
E_t_data-waers like reguh-waers
E_t_data-srtgb like reguh-srtgb.
E_t_data-znme1 like reguh- znme1.
E_t_data-znme2 like reguh- znme2.
E_t_data-znme3 like reguh- znme3.
E_t_data-znme4 like reguh- znme4.
E_t_data-zpstl like reguh-zpstl.
E_t_data-zort1 like reguh-zortl.
E_t_data-zstra like reguh-zstra.
E_t_data-zpfac like reguh-zpfac.
E_t_data-zland like reguh-zland.
E_t_data-zregi like reguh-zregi.
E_t_data-zbnkl like reguh-zbnkl.
E_t_data-rzawe like reguh-rzawe.
E_t_data-hktid like reguh-hktid.
E_t_data-hbkid like reguh-hbkid.
E_t_data-zpst2 like reguh-zpst2.
E_t_data-uzawe like reguh-uzawe.
E_t_data-pernr like reguh-pernr.
E_t_data-btznr like reguh-btanr.
E_t_data-laufd like reguh-laufd.
E_t_data-zaldt like reguh-zaldt.
E_t_data-rwbtr like reguh-rwbtr.
E_t_data-rwskt like reguh-rwskt.
Modify e_t_data index sy-tabix.
Endif.
Endloop.
Logic for eliminating voided Checks Begin
itab[] = e_t_data[].
SORT itab BY chect.
LOOP AT itab WHERE ( voidu NE space ) AND ( voidd NE space ).
wa_idx = sy-tabix.
wa_chect = itab-chect. CLEAR wa_found.
wa_zbukr = itab-zbukr.
wa_hbkid = itab-hbkid.
wa_hktid = itab-hktid.
wa_rzawe = itab-rzawe.
DO.
SELECT SINGLE * FROM payr WHERE
zbukr = wa_zbukr AND
hbkid = wa_hbkid AND
hktid = wa_hktid AND
rzawe = wa_rzawe AND
chect = wa_chect.
IF sy-subrc NE 0.
Not transferring this record to BW
message 'Invalid Check No.' type 'I'.
DELETE itab.
wa_found = 'Y'. EXIT.
ENDIF.
IF ( payr-voidu NE space ) AND ( payr-voidd NE space ).
wa_chect = payr-checv.
wa_zbukr = payr-zbukr.
wa_hbkid = payr-hbkid.
wa_hktid = payr-hktid.
wa_rzawe = payr-rzawe.
If the Replacement Check # points to Original Check No., this record
will be skipped.
IF itab-chect = payr-checv.
DELETE itab INDEX wa_idx.
EXIT.
ENDIF.
ELSE.
MOVE-CORRESPONDING payr TO itab.
APPEND itab. wa_found = 'Y'.
MOVE-CORRESPONDING itab TO itab1.
APPEND itab1.
EXIT.
ENDIF.
IF wa_found = 'Y'.
EXIT.
ENDIF.
ENDDO.
ENDLOOP.
SORT itab by zbukr hbkid hktid rzawe chect.
DELETE ADJACENT DUPLICATES FROM itab COMPARING zbukr hbkid hktid
rzawe chect.
LOOP AT itab1.
READ TABLE itab WITH KEY
zbukr = itab1-zbukr
hbkid = itab1-hbkid
hktid = itab1-hktid
rzawe = itab1-rzawe
chect = itab1-chect BINARY SEARCH.
IF ( itab-voidu IS NOT INITIAL ).
DELETE TABLE itab FROM itab1.
ENDIF.
ENDLOOP.
04/13/08 commented to satisfy 4th condition
Do not extract the Original record of the replaced Check
LOOP AT itab.
IF ( itab-voidu IS NOT INITIAL ) AND
( itab-voidd IS NOT INITIAL ).
DELETE itab.
ENDIF.
ENDLOOP.
04/13/08 commented to satisfy 4th condition
Logic for eliminating voided Checks End
***The below process can be used for Delta Extraction using Time Stamp
loop at itab.
concatenate itab-pridt itab-priti into wa_timstmp.
move wa_timstmp to itab-timstmp.
move-corresponding itab to e_t_data.
append e_t_data.
endloop.
e_t_data[] = itab[].
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
=========
Please advise me and where will i correct the code.
Thanks in advance,
Siri.
Edited by: SIRI SIRI on Jun 3, 2008 3:26 PMHi,
use the following:
define a index variable.
data: l_index type sy-tabix.
in your loop at e_t_data.
loop at e_t_data.
new statement
l_index = sy-tabix.
changed statement
modify e_t_data index l_index.
endloop.
The other read operations on internal tables will reset sy-tabix so that it will point to a invalid record.
regards
Siggi -
InDesign auto-size frame feature not working in real time in InCopy why?
We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC. -
Hi,
I am trying to create a gui where I can browse on my desktop and load a file from there to take it to the server. Below I have taken a snipet of the code where I browse on my desktop, but my problem is this is not displayed in the textfield...(and I have tried searching ways on the internet how this can be done but to no avail I couldn't find anything that made sense to me). In addition, the output statement I have inserted for debugging purposes just gives me the file (not the full path, etc I get You chose to open file: sample.txt, and I would like to see You chose to open file : C://Documents and Setitngs/ Desktop/ ... /sample.txt. ) and I am trying to get this displayed on the text field whereby I can add it onto a list that is below it and when I click Add and Done, the server can pull these files from my machine to it...
//Browse Button
JButton button_Browse = new JButton ("Browse");
c.gridx = 2;
c.gridy = 3;
button_Browse.addActionListener(new ActionListener()
private Component parent;
public void actionPerformed(ActionEvent ae)
String command = ae.getActionCommand();
System.out.println("Browse for Document to Add");
JFileChooser choose = new JFileChooser();
int returnVal = choose.showOpenDialog(parent);
System.out.println("RETURN VALUE IS:"+ returnVal);
if(returnVal == JFileChooser.APPROVE_OPTION)
String filename = choose.getSelectedFile().getName();
System.out.println(filename);
System.out.println("You chose to open file: "+ filename);
//Display Document in path textfield
/* Filter out all file types but text file [to do later]
.... more code to this
});more to it for the doc list
private static void initializeDocList() {
// TODO: Dynamically retrieve the list of project names
//client.SessionManager.getProjectList();
String[] DocNames = { "Doc1", "Doc2", "Doc3", "Doc4", "Doc5" };
JList DocList = new JList(DocNames);
DocList.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
DocList.setLayoutOrientation(JList.VERTICAL);
DocList.setVisibleRowCount(-1);
DocList.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent me) {
System.out.println( "Document to add is selected");
DocListScroller = new JScrollPane(DocList);
DocListScroller.setPreferredSize(new Dimension(400, 300));
} -
Purchase register report problem
Hi experts - please help
we have a requirement to create a purchase register for material from PO- to Invoice.
we have PO number -> GRnumber -> Invoice number in our rows . In our keyfigures we have PO Quantity, PO value , GR quantity,GR Value, Invoice quantity and invoice amount .
Becoz of invoice and GR number relationship which is m: m in our report we see that the key figure values are showing up like
for 1 purchase order multiple line items , with multiple gr's, with multiple invoices , becoz of which we see PO quantity field showing like say if it is 30 for 1 PO it is showing 30 for all the invoice numbers in the report which not want , the same case is with Gr quantity and invoice quantity
PO.no / po item / gr no / inv number / po quanitity / po value
1000/10,20,30,40/1000/2000,3000,4000,5000/ 30,30,30,30,30/ 120,120,120,120,120
this way for 1 PO the report is showing same po quantity based on say if 10 invoices it is showing same P0 Quantity 10 times which is not want and the result row shows up (POvalue *10).
how to get rid of this situation..
please suggest any way if anyone has done a similiar report..
any documents related to such purchase register report is highly appreciated.
thanks & regards
krishnaHi Krishna,
Your PO DSO will have records like this.
PO Item POquantity GR Quantity
PO1 1 100 35
Your GR DSO will have information as shown below.
GR Doc Item Posting date GR Quantity PO PO Item
DOC1 1 01.07.2011 20 PO1 1
DOC2 1 10.07.2011 15 PO1 1
If the report is based on PO, ( Document date of PO ), then you can show information from the first DSO. If the user wants to have the details of GR documents that constitute GR quantity of 35, you can create a 'Jump to' report on the second DSO and in the RRI Connection map the PO and Item numbers.
This way you will be able to store the information at different granularity and combine them in reporting.
Hope this explains,
Thanks,
Krishnan -
Comparing and picking the right value form one of the line item in a doc.
Hi Gurus,
I have requirement such that I have to show the tax jurisdiction code of only one item. That is if there are 5 line items with in a document and each one has diffeerent tax jurisdiction code, then we should be showing only one tax jurisdiction code for a document. Line items are not displayed in report. The condition to pick up tax jurisdiction code is the one which has least ending zeros.
Supppose
Doc1 Item Tax Jurisdiction code
1800000002 1 CNQC00000000000
1800000002 2 CNQC00000000000
1800000002 3 CN0000000000000
1800000002 4 CNQC00000000000
1800000002 5 TXJOHNCLEBUR000
I have to display the value of tax jurisdiction code corresponding to item 5 as its has least zeros in it.
So what I am trying to do is add another custom z object tax jurisdiction code and the value for this is populated using a routine in the update rules, such that comparing all the tax jurisdiction code for all the corresponding items in a document.
Now the question is if I am reading all values of document no. line item and tax jurisdiction code into an internal table form communication structure for a data package. And in the update rule I will be writing a routine comparing the values of tax jurisdiction code from internal table and populating the desired value. Now the big question for me is if there are two line items of a document in one data package and another 3 line items of the corresponding same document in data package 2 then how can we compare the values of Tax jurisdiction code of all the 5 line items of a document.
If this can be achieved using customer exit on the front end let me know and just inputs how the abap code would be or if not do I have to write abap in updates rules. I just want to know how to compare different values of Tax Jurisdiction code and select the one with has least ending zeros. For information the tax jurisdiction code is of type character and length 15.
Any help is really appreciated.
Thanks,
RajYes, it's possible. Just use a regular text item. Create an LOV using the LOV wizard. When you define the query for the LOV's record group, enter a statement that selects from the other database table. Set the return value of the appropriate LOV column to be the text item on the form. Finally, assign the LOV to that text item, so that the LOV pops up when the user presses the LOV key with the cursor in that text item. You can also set the LOV so that it automatically displays when the cursor enters the text item.
Just look up LOV in online help if you need more info. -
Select open items for a settlement amount
Hi All,
I have a requirement to do a clearing with situation like this,
upload a excel file contains of settlement amount.
This amount will use to clear up the payment JV save earlier (open items)
for example: settlement 57.00
then the open item documents :
doc 1 > 7.00
doc 2 >20.00
doc 3 >50.00
doc 4 >20.00
doc 5 >17.00
from example above, the settlement can clear with doc1+doc3
or doc2doc4doc5
My program is using the bdc call 'F-03' to do clearing.
how to program the logic if wan scenerio 1 or 2 based on any number of open items sum up is equal to settlement amt.
Any standard FM can use ?
Please help. << Priority removed >>
Thanks
Edited by: Rob Burbank on Sep 14, 2011 1:27 PMAnything that sounds as if to make your matter look more important than the others, especially texts like "urgent", "at the earliest", "ASAP", will be removed from the posts. Please avoid these in the first place.
Thomas
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] -
Migration of Discoverer 1g reports to OBIEE
we are trying to migrate reports from Discoverer 10g to OBIEE 10.1.3.4.We have migrated the EUL using the utility tool provided by OBIEE.
Now we were trying to use the sample reports and migrate the same to OBIEE 10.1.3.4.
We are using a sample xml which we will be using to migrate the reports .We have a web service which takes report inputs in this XML format, converts and save OBIEE reports.
SInce OBIEE does not have tabs(worksheets) like Discoverer,we thought
we will have to prepare xml for each tab and present it as a single
report in OBIEE.
1) Can u please suggest if this is right or there is some
workaround for it or if anyone has idea about it?
We could also do some changes to the xml to incorporate some functions of discoverer if anyone has suggestions.
We are assuming that Crosstab reports are similar to Pivot tables in OBIEE.
2) But we are not sure how to incorporate the page items in thexml.plz suggest if anyone has ideas since not sure if page items can be handled in OBIEE.
3) Can someone help us in completing with this below xml by taking example of the sample reports present in discoverer.The values of reports are to be included in the xml
Any help would be great since we are trying this for the first time and we are not well versed with xml too.Please find below the sample xml we are using
- <OBIEE version="10.1.3.4">
- <report Name="" subjectareaname="">
- <!-- All the columns used in any of the views will be added here in critera
-->
- <filters>
- <!-- Filter parameters
type : logical/SQL
if type = "logical"
operator : logical operator if type is logical
SQLName : Physical Table.Column name on which the filter is applied, if type is logical
dataType : Data type of the column mentioned in SQLName
VALUE : Value of the filter
if type = "SQL"
sqlExpression: filter SQL expression
-->
- <filter type="" SQLDefinition="" operator="" negate="" includeNULLs="">
<filterValue dataType="">VALUE/sqlExpression</filterValue>
</filter>
- <!-- parentSection filter Expression and Name in case of HIR to OBIEE Migration
-->
<referenceFilterExpression Name="">FilterExpression</referenceFilterExpression>
</filters>
- <!-- column Prarameters
** SQLName : Physical Names of Table.Column [Column Definition]
sort : asc/dsc
Name : column name to be shown as
datafunction : aggrigate function applied on the column
showColumnTotal : True/False
SuppressDuplicates: True/False
** is mandatory attribute on the column
-->
<titleView title="" subTitle="" logoURL="" />
- <tableView Name="" ShowColumnTitles="false">
- <!-- If no Group columns, BI table View will be generated, else Dashboard
-->
- <dimensions>
<column Name="" SQLDefinition="" sort="" total="false" />
</dimensions>
- <facts>
<column Name="" SQLDefinition="" aggRule="" />
</facts>
</tableView>
- <pivotView Name="" ShowColumnTitles="false">
- <page>
<column Name="" SQLDefinition="" total="none" sort="desc/asc" visibility="" />
</page>
- <Section>
<column Name="" SQLDefinition="" total="none" sort="desc/asc" visibility="" />
</Section>
- <rows total="none">
<column Name="" SQLDefinition="" total="none" sort="desc/asc" visibility="" />
</rows>
- <columns total="none">
<column Name="" SQLDefinition="" total="none" sort="desc/asc" visibility="" />
</columns>
- <measures>
<column Name="" SQLDefinition="" aggRule="" visibility="" />
</measures>
</pivotView>
<chartView Name="" />
- <prompts>
- <!-- Filter parameters
operator : logical operator used in the prompt filter
SQLName : Physical Table.Column name on which the filter is applied
subjectArea : Subject Area Name into which the prompt belongs to
promptcaption : Display Name of the Prompt
promptDescription : Description if any
-->
<prompt SQLDefinition="" operator="" promptcaption="" promptDescription="" />
</prompts>
</report>
</OBIEE>Hi,
I opened the Discoverer administrator and clicked on export.
in next step i selected the option "Selected obects in the end user layer" for "what do u want to export"?
i choose workbook and selected the sample workbook "Video Tutorial workbook"
Then i gave the name "Video Sales Tutorial" and saved the file in a folder and selected the check box "generate xml for exported workbooks"
I got the file in the folder as Video Sales Tutorial.eex.That .eex file had details of the workbook name and all other information
<UniqueIdent ConstraintName="DOC1" Batch="False" DeveloperKey="VIDEO_TUTORIAL_WORKBOOK"/>
But to get these workbook details we have to always save the workbook in the DB.We cannot save the workbook in our file system.
Am i right?Since only workbooks which are in DB can be exported.
Thanks a lot for the info.Will try to analyze this information -
Creating a sample report using JAVA SDK
Hi,
I am trying to create a sample report using JAVA SDK.
I slelect 4 "free cells" and pass 4 different strings to it.
I even slelect the font colour and size. When i run the class and try to view the report in Infoview, I only seeblank blocks without any data. Now if I edit the report from infoview, and save the changes, I am able to see the data.
My issue is, Why am I not able to see the data when I run the java code.
Please find teh code below.
package com;
import java.awt.Color;
import java.io.FileOutputStream;
import java.util.ArrayList;
import java.util.Date;
import java.util.List;
import com.businessobjects.rebean.wi.BinaryView;
import com.businessobjects.rebean.wi.DataProvider;
import com.businessobjects.rebean.wi.DataProviders;
import com.businessobjects.rebean.wi.DataSource;
import com.businessobjects.rebean.wi.DataSourceObject;
import com.businessobjects.rebean.wi.DocumentInstance;
import com.businessobjects.rebean.wi.DocumentLocaleType;
import com.businessobjects.rebean.wi.FontImpl;
import com.businessobjects.rebean.wi.FreeCell;
import com.businessobjects.rebean.wi.HTMLView;
import com.businessobjects.rebean.wi.OutputFormatType;
import com.businessobjects.rebean.wi.PageHeaderFooter;
import com.businessobjects.rebean.wi.Query;
import com.businessobjects.rebean.wi.Recordset;
import com.businessobjects.rebean.wi.Report;
import com.businessobjects.rebean.wi.ReportBody;
import com.businessobjects.rebean.wi.ReportCell;
import com.businessobjects.rebean.wi.ReportContainer;
import com.businessobjects.rebean.wi.ReportElement;
import com.businessobjects.rebean.wi.ReportEngine;
import com.crystaldecisions.sdk.framework.CrystalEnterprise;
import com.crystaldecisions.sdk.framework.IEnterpriseSession;
import com.crystaldecisions.sdk.framework.ISessionMgr;
import com.crystaldecisions.sdk.occa.infostore.IInfoObject;
import com.crystaldecisions.sdk.occa.infostore.IInfoObjects;
import com.crystaldecisions.sdk.occa.infostore.IInfoStore;
import com.crystaldecisions.sdk.plugin.CeKind;
public class Aug7th {
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
String CMS = "pundl8136:6400";
String userID = "srivas";
String password = "morcom123";
String auth = "secEnterprise";
List<String> entire =new ArrayList<String>();
List<String> country =new ArrayList<String>();
List<String> resort =new ArrayList<String>();
IEnterpriseSession enterpriseSession;
try
ISessionMgr mySessionMgr = CrystalEnterprise.getSessionMgr();
enterpriseSession = mySessionMgr.logon(userID, password, CMS,auth);
if (enterpriseSession != null)
{//Create and store useful objects for the session.
IInfoStore iStore = (IInfoStore)enterpriseSession.getService("InfoStore");
ReportEngine reportEngine = (ReportEngine)enterpriseSession.getService("WebiReportEngine");
IInfoObject infoView = null;
String str = "SELECT SI_ID, SI_NAME, SI_PARENTID FROM CI_INFOOBJECTS WHERE (SI_KIND = '"+CeKind.WEBI+"' OR SI_KIND='FullClient') " +
"AND SI_INSTANCE = 'false' AND SI_NAME='Structure Test_001_Java' ORDER BY SI_NAME ASC ";
//String str = "SELECT SI_ID, SI_NAME, SI_PARENTID FROM CI_INFOOBJECTS ORDER BY SI_NAME ASC ";
IInfoObjects objInfoObjectsWIDs = (IInfoObjects) iStore.query(str);
System.out.println(objInfoObjectsWIDs.size());
IInfoObject objInfoObjectWID = (IInfoObject) objInfoObjectsWIDs.get(0);
DocumentInstance doc = reportEngine.openDocument(objInfoObjectWID.getID());
DataProviders dps = doc.getDataProviders();
// Retrieve the 1st data provider
DataProvider dp = dps.getItem(0);
// Retrieve the universe objects
DataSource ds = dp.getDataSource ();
Query q = dp.getQuery();
Recordset rs = dp.getResult(0);
// 0: assume query has one flow
rs.first();
// Print the column types. They can be Integer, String,
// or Date.
for (int i = 0; i < rs.getColumnCount(); i++) {
Class c = rs.getColumnType(i);
StringBuffer sbt = new StringBuffer();
if ( c.equals(Integer.class) )
sbt.append("Integer");
if ( c.equals(String.class) )
sbt.append("String");
if ( c.equals(Date.class) )
sbt.append("Date");
sbt.append(";");
System.out.println(sbt.toString());
System.out.println(rs.getColumnCount());
while (!rs.isLast()) {
// column names
StringBuffer sbn = new StringBuffer();
StringBuffer sbd = new StringBuffer();
for (int j = 0; j < rs.getColumnCount(); j++) {
sbn.append( rs.getColumnName(j).toString() );
sbn.append(";");
System.out.println("sbn "+sbn.toString());
// data
for (int k= 0; k< rs.getColumnCount(); k++) {
sbd.append( rs.getCellObject(k).toString() );
sbd.append(";");
entire.add(rs.getCellObject(k).toString());
System.out.println("sbd "+sbd.toString());
rs.next();
System.out.println(entire.size());
for(int i=0;i<entire.size();i++){
country.add(entire.get(i));
i++;
System.out.println("entireList "+entire.get(i));
resort.add(entire.get(i));
DataSourceObject city = ds.getClasses().getChildByName("Country");
DataSourceObject resorts = ds.getClasses().getChildAt(1);
dp.runQuery();
ReportContainer report = doc.createReport("Resort");
PageHeaderFooter header = report.getPageHeader();
FreeCell headerCell = header.createFreeCell("Resort Report");
PageHeaderFooter footer = report.getPageFooter();
FreeCell footerCell = footer.createFreeCell("Report Ends");
ReportBody body = report.createReportBody();
for(int k=0;k<resort.size();k++){
FreeCell res=body.createFreeCell(resort.get(k));
res.getAttachTo();
res.setHeight(15d);
res.setWidth(30d);
Color c = new Color(255,255,255);
Color c1 = new Color(255,0,0);
FontImpl fnt = (FontImpl)res.getFont();
fnt.getDecoration().setTextColor(c1);
res.setFont(fnt);
//res.deleteAttachment();
//res.setAttachTo(body,VAnchorType.BOTTOM,HAnchorType.NONE);
doc.applyFormat();
doc.refresh();
final String l_docToken = doc.getStorageToken();
final DocumentInstance l_docToSave = reportEngine.getDocumentFromStorageToken(l_docToken);
doc.saveAs("mor31",835,null,null);
doc.closeDocument();
str = "SELECT SI_ID, SI_NAME, SI_PARENTID FROM CI_INFOOBJECTS WHERE (SI_KIND = '"+CeKind.WEBI+"' OR SI_KIND='FullClient') " +
"AND SI_INSTANCE = 'false' AND SI_NAME='mor31' ORDER BY SI_NAME ASC ";
//String str = "SELECT SI_ID, SI_NAME, SI_PARENTID FROM CI_INFOOBJECTS ORDER BY SI_NAME ASC ";
objInfoObjectsWIDs = (IInfoObjects) iStore.query(str);
System.out.println(objInfoObjectsWIDs.size());
objInfoObjectWID = (IInfoObject) objInfoObjectsWIDs.get(0);
DocumentInstance doc1 = reportEngine.openDocument(objInfoObjectWID.getID());
String token = doc1.getStorageToken();
DocumentInstance doc2 = reportEngine.getDocumentFromStorageToken(token);
doc2.saveAs("123123", 835, null, null);
// doc.refresh();
//doc.save();
enterpriseSession.logoff();
catch(Exception e)
e.printStackTrace();duplicate post:
Sample report using JAVA SDK -
How to handle dbms_xmldom with no data values.(no_data_found error in dom)
hi,
i have below block,
DECLARE
doc dbms_xmldom.DOMDocument;
node dbms_xmldom.DOMNode;
elem dbms_xmldom.DOMElement;
cur_node dbms_xmldom.DOMNode;
root_elem_data dbms_xmldom.DOMElement;
root_elem_tab dbms_xmldom.DOMElement;
root_node_data dbms_xmldom.DOMNode;
mode_elmn dbms_xmldom.DOMElement;
mode_node dbms_xmldom.DOMNode;
mode_text dbms_xmldom.DOMText;
doc1 DBMS_XMLDOM.DOMDOCUMENT;
root_node_data1 DBMS_XMLDOM.DOMNODE;
child_document DBMS_XMLDOM.DOMDOCUMENT;
child_rootnode DBMS_XMLDOM.DOMNODE;
V_CLOB CLOB;
v_doc CLOB;
v_EMP CLOB;
v_output_filename VARCHAR2(300) := 'SPOOL_DIR/'||'EMP_XML_FILE.xml';
l_xmltype XMLTYPE;
BEGIN
doc := dbms_xmldom.newDOMDocument;
node := dbms_xmldom.makeNode(doc);
dbms_xmldom.setversion(doc, '1.0');
dbms_xmldom.setCharset(doc, 'UTF8');
elem := dbms_xmldom.createElement(doc, 'PartnerInfo');
dbms_xmldom.setAttribute(elem,'xmlns','EMP');
cur_node := dbms_xmldom.appendChild(node, dbms_xmldom.makeNode(elem));
mode_elmn := dbms_xmldom.createElement(doc, 'EMPLOYEE');
mode_node := dbms_xmldom.appendChild(cur_node,dbms_xmldom.makeNode(mode_elmn));
BEGIN
SELECT value(e) INTO l_xmltype
FROM TABLE(XMLSequence(Cursor(SELECT * FROM EMP1 where EMPNO=7501))) e;
child_document := DBMS_XMLDOM.newDOMDocument(l_xmltype);
root_node_data1 := dbms_xmldom.importNode(doc,dbms_xmldom.makeNode(dbms_xmldom.getDocumentElement(child_document)),TRUE);
root_node_data1 := DBMS_XMLDOM.appendChild(root_node_data, root_node_data1);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
dbms_lob.createtemporary(v_doc, true);
dbms_xmldom.writeToClob(doc,v_doc,'UTF8');
v_EMP:= v_doc;
dbms_xmldom.writeToFile(DOC,v_output_filename,'UTF8');
dbms_xmldom.freeDocument(doc);
--Dbms_Output.Put_Line('THE OUTPUT IS::'||V_EMP);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
The xml file is 'EMP_XML_FILE.xml'
<empno>U++kYmcVuGchxbh+++++++++++++++1+</empno>
<empname>J</empname>
suppose the empno 7501 is not available in our emp table,
i got error
ORA-03113: end-of-file on communication channel
how to handle xmldom with no data values.
by
sivahi,
please give the solution
by
siva -
Startup and performance problems
Hi Community!
First of all, i don't expect to get a good answer to this. I've search for three days for these specific errors, and thought i should share my experiences with other users with similiar problems. I ran Apple Hardware Diagnostics and finally got some sort of clue as to whats wrong with my computer. The exact error code i received was: 4SNS / 1 / 40000000 : IC0C - 51.511. However the only information i've been able to find about that specific error code (IC0C) was: "Current Sensor on CPU 0". And just for the fun of it, iStat Pro reports that the processor uses 51.51A wich to me sounds really high, but i havn't found any relevant info about how many amps this processor is supposed to use.
My Specs:
MacBook Pro (6.2) mid-2010 edition.
15" antiglare highres
8GB Ram
i7-620m 2.66Ghz
7200rpm 512GB harddrive
Mac OS X 10.6.7
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f16
My issues:
I have a couple of really annoying problems with this computer:
First of all the most recent issue, it wont start! Or at least it wont boot unless i press and hold the power button for several seconds until the led indicator blinks rapidly. If i've put it to sleep, when i wake it up it will show the desktop for 1-2 seconds, then it will just die. It wont matter if i have it plugged in with the power cord or running on battery.
My second issue is its poor performance, it's about less than a third as fast as it should be when compared to a friends almost identical computer (the only difference is the screen and the harddrive). And by this i mean pure computing power. http://db.xbench.com/merge.xhtml?doc1=521138&doc2=521137 yeah i know, xbench is a bit long in the tooth but when two nearly identical computers differ that much in the same test something is clearly wrong.
Also as a bonus to the strange behaviours above, my fans sometimes start spinning at 6000rpm and gets stuck there until i shut down the computer or put it to sleep. Neither iStat Pro or SMCFanControl can lower the speed of the fans when they've started running at that speed. And there seems to be no reason for them to run that high as the temperature is below 40C on cpu and around 50C on the gpu. However i've seen a lot of posts about this specific issue, and there was some talk about the power supply sensor being out of whack.
What i've tried:
Reset SMC several times
Reset PRAM several times
Tried to boot from another harddrive
Completely erased harddrive and reinstalled a fresh copy of OS X
Apple Hardware Diagnostics (And finally got something to indicate an error)
Tried reinstalling EFI firmware, but it won't let me (Unsupported Hardware....)
Nothing has worked so far. I will return this computer as soon as it's possible. But i'm too curious as to what that error really means and can that error really be the root cause of my problems? Or rather is the SMC/mainboard faulty?
Sincerly
FredrikI think 4SNS might not always be temperature sensors, i think it can be any of the values you can derive from the SMC.
In this case i'm most interested in this specific error code: IC0C (Current Sensor on CPU 0). I'm guessing there's some secrecy going around Apples error codes and therefore there might not be a good answer to this
If i might throw out an uneducated guess, it could be that the voltage/amperage sensor on CPU 0 reports an invalid value and therefore the computer won't start normally to protect itself in case the amperage would be too high.
The reason i ask, is because there might be others out there with this specific error and symptoms that's also curious as to what the cause might be. The correct solution for the problem however is to send it in of course
So i will send the computer a.s.a.p as you suggest Michael. -
Can I combine two pdf files by using command lines?
Hi
I always need to combine two pdf files into one in my regular work
Currently, I open one of them, press ctrl+shift+I,
find another file and double click it.
It works but not so efficient since I need to do
this procedure many times everyday
So I'm looking for a better solution
Something like command lines,
for example:
acrobat.exe "combine" "doc1.pdf" "doc2.pdf"
Does acrobat have these functions or not?
Thx &
Best RegardsFile > Combine
-
How to Get Choices as a Dropdown from a different Column for the same Item In a Document Library?
Hello All,
I was trying to see if there is any way that we can get the choices for a Field from another filed in the same item in a Document Library.
To be specific.
I have Created a Project Document Set, Which has a Column called "Project Members" where all the members will be listed. This will be inherited to all the documents in that Project Document Set. This is used to grant Permission using Workflow.
I also have "Document Members" Column(This is only for Documents) who will be given Edit permissions to that Document using a Workflow. This can be any type of column(choice, People or Group etc) As long as I can select multiple values.
I am looking for a way to get the "Project Members"(Values or Users) as choices for "Document Members". I know this is possible in the List as you can customize in the InfoPath Form. But not sure in the Document Library.
Document Members can only be the members from the Project Members, In order to grant granular Permissions for the project And Documents using a Workflow
Document Library
Project Document Set Name
File Name
Project Members
Document Members
Project A
User1;User2;User3
Doc1
User1;User2;User4
User1;
Doc2
User1;User2;User5
User1;User2;
Doc3
User1;User2;User6
User1;User2;User3;
Project B
User5;User6;User7;
Doc1
User5;User6;User7;
User7;User5
Doc2
User5;User6;User7;
User7;User5
Doc3
User5;User6;User7;
User5;User6;User7;
Thanks for your time.>
Jenny Karunakaran wrote:
> Hi Jung,
>
> Thanks for the reply. But I dont know how to assign value set to this attribute(i.e. Context atribute to which filter value property is bound). Can I use a supply function for this ?
>
>
> Regards,
> Jenny
No. A value set and a supply function are two completely different things. You use this Context API to populate the value set for an attribute:
IF_WD_CONTEXT_NODE_INFO=>SET_ATTRIBUTE_VALUE_SET
Value Sets are also how ByKey UI elements (like the DropDownByKey) are built. Here is a help document that discusses value sets - but in the context of the ByKey UI elements. The process is the same for creating the value set however:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bb/69b441b0133531e10000000a155106/frameset.htm
Maybe you are looking for
-
Need some help with a small issue.
Im running my computer with a K8T Neo2, a Gigabyte Maya II R9700Pro, and 4x512 400 Mhz memorys (Unsure about the label.). Recently i also purshased & installed a Creative X-Fi Platinum (Togheter with the sound system i bought a few days earlier.) Als
-
I cant connect my ipad3 to Windows8 anymore
it connected last November but when I try it now, all it does is pop up a Windows Explorer window showing my iPad. It doesn't open iTunes. Even if I have iTunes open, it doesn't display my iPad.
-
IPhone4 how to clear google browsing history
How do I clear my google browsing history from my IPhone4 please??
-
Oracle 8i Database Server & Soap
Does Oracle 8i DB support Soap ? If so can some one send me some examples TIA - RPG
-
HOW DO I GET RID OF SHARED FILES?
I OPENED UP MY ITUNES AND FOUND **** IN MY SHARED SECTION. HOW DO I DELETE IT?