Ccms alert for RFC service

I have a simple task that i was told to monitor.
There is RFC to a remote non-sap system that is setup in SM59.  This non-sap system some times stops responding.  I would like to setup a CCMS alert specific to this RFC.  I have tried creating all kinds of alerts and methods but have not been successful.
Does anyone have a simple steps on how I go about creating a simple alert specifically monitoring a particular RFC connection?
I have looked at sdn ccms page and help on ccms from sap help, but they have not 'helped'.

HI
For any application server with a single instance,whenever it would stop working, would mean that the message server has gone down.In such a case, how is a system suppose to respond?
Do correct me if I am wrong here.
Regards
Chen

Similar Messages

  • CCMS Alert for J2EE in Solman

    Hi All,
    I need to set CCMS alert for J2EE monitoring in solman. Could any one help me in this regard. I guess for this we need to configure GRMG monitoring. Could anyone suggest how to do this.
    Thanks & Regards,
    Sundara.

    Hello Sundara
    You can setup CCMS for J2EE in the following ways
    1. Setup system monitoring in DSWP as you do for ABAP systems
    2. Installing and Registering sapccmsr agents
    3. Availability Monitoing by GRMG Lite and GRMG
    4. Setting up Central Autoreaction
    5. E2E analysis (Solution Manager Diagonostic)
    Four options are excellently elaborated in the following link
    Setting Up your Central Monitoring [original link is broken]
    and E2E
    http://service.sap.com/diagnostics
    If you face any problem in any of these, revert back
    thanks
    Bhudev

  • CCMS aler for RFC destinations availability

    Hi Experts,
    We have configured ccms alert autoreaction method for availability of RFC destinations.
    alert is configured with yellow thershold as 10% and red threshold as 5%.
    alert text is :&1 &3 < &2 &3  15 min. avg. value below threshold value (&4 measurements)".
    We are receiving mail alerts for CCMS red alert for RFC saying" 0 % < 5 %  15 min. avg. value below threshold value (1 measurements) ".
    But when we checked the corresponding RFC is working fine.
    Can anyone please explain how this RFCs destinations check alert will work and what is the meaning of alert text ":&1 &3 < &2 &3  15 min. avg. value below threshold value (&4 measurements)"."
    Thank you,
    Kavitha

    Hi
    I have done
    1. RFC connection from x to y and y to x
    In X system:
    1. In transaction RZ21, mark Method definitions, and choose Display overview
    Copyed standard CCMS_RFCDest_Availability_Col method definition to ZCCMS_RFCDest_Availability_Col
    Parameters tab
    For x
    Parameter name = RFC_DEST
    value = SM_XCLNT510_TRUSTED
    Parameter name1 = COLL_METHOD
    value = ZCCMS_RFCDest_Availability_Col
    Same in Y but for RFC_DEST give
    Parameter name = RFC_DEST
    value = SM_YCLNT100_TRUSTED
    Execution Tab
    Type of call = Function module
    Call SALK = SALK_RFCDEST_AVAILABILITY
    Execute method on = The local server of the MTE to be processed
    Execute method for = Individual MTE
    Control tab :
    Execute method for = Individual MTE
    Execute method = periodically in dialog process (short-running program)
    Startup method = Execute method immediately after monitoring segment start
    Execution location
    of startup method = Only on the central instance
    Start Tab:
    Execute method = Data Collection Method
    also try in so many way as in :Parameter Tab:
    RFC_DEST               SM_XCLNT510_TRUSTED
    COLL_METHOD            ZCCMS_RFCDest_Availability_Col
    MTE_CLASS              Availability_RFC_Destinations
    MTE_CLASS              CCMS_RFCDest_Availability_MO_Class
    MTE_CLASS              CCMS_RFCDest_Availability_Col
    COLL_METHOD            CCMS_RFCDest_Availability_Col
    RFC_DEST               CCMS_RFCDest_Availability_Col
    Problem:
    I am not able to  Reset the segment in WARMUP status
    not able to find the node in RZ20
    Regards,
    Neni

  • CCMS Alert for missing filesystem

    Hi Experts,
    We are facign an issue in transports as /usr/sap/trans mount went missing after last server reboot and did not get mounted.
    For this we will have to schedule another maintenance to remount this.    To avoid such scenario in future; we need to set up ccms alert so that we receive alert if any filesystem is missing. We are already getting ccms alerts for filesystem size, CPU usage etc using hostagent and saposcol.
    Please help if its possible to have alert if any filesystem is not mounted. If yes; please help is proceeding in that direction
    Thanks
    Varun

    Hi Varun,
    Please check SAP help http://help.sap.com/saphelp_nw73/helpdata/en/4c/0e863be3047e19e10000000a114084/content.htm
    You may look for File system monitoring option
    Hope this helps.
    Regards,
    Deepak Kori

  • CCMS Alert for Backup DB2 on OS390

    Experts
    We would like to configure CCMS Alert for backup failures on the Db2 database which resides on z/OS. I have an option in RZ20 to configure , but it tell me which tablespaces needed fort the backup. it dosent tell you whether the backup is success or failed. I can see the status from the backup history in db2 t code. So how do we configure?do we really have an option to use the same.
    Regards,
    Mahesh Shetty

    Hi,
    did you check this SDN Document regarding your monitoring problem?
    [SAP DB Admin Guide for DB2|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5a6c489b-0501-0010-7ab2-80450fc6ce60?quicklink=index&overridelayout=true]
    Kind regards,

  • CCMS - Alert for Email-Errors in the SOST

    Hello everybody,
    is there a way to set an Alert in the CCMS for checking Email sent with errors from the transaction SOST?
    We´ve also connected an externe Fax Programm: this service is build over a RFC and functions successfully. We´d like to check all faxes with errors in the CCMS Monitoring, too.
    In our SCOT the Node for the SAPConnect was already activated:
    - Utilities - Alert Monitoring - Start Data Collection Method:
    Data collection method for SAPconnect ran with no errors.
    Now i can see it:
    - Utilities - Alert Monitoring - Display - SAPConnect.
    Into my custom Monitor i´ve put a MTE SAPconnect node, with name:
    - ACTIVE
    RFC system error: Function SMON_COMP_STATE_RETRIEVE is not available
    What does this error mean? How can i easy configure the monitoring of the SOST?
    Do i have to create a custom or is there any method which i can use as analyse method for the checks of the sapconnect?
    PS: the same error appears also if as test i send one fax to a false address: this isn´t the error that i expected to receive.
    Please on reply.
    Thanks as alwalys.
    Alberto

    Hi Gagan,
    thanks for the reply, i had already seen this link in internet but i´d like to know if there´s a way which use only the standard methods in the CCMS, without changes in any programs.
    Not implemented Steps: B, E (autoreaction method not needed for this alert at the moment), F.
    I have also created a analyse method with name SOST and assigned to the node.
    But after starting the Data collection method for SAPconnect i see in CCMS the alert error:
    RFC system error: Function SMON_COMP_STATE_RETRIEVE is not available
    I didn´t send any fax or email yet, i´m still by the the configuration...
    Where does this error come from?
    Thanks.
    Alberto

  • CCMS Alert for Stuck Queue

    Hi
    I want to setup alert for any ABAP Dump or any Failed XML Message.
    Requirement is that it should come to me as an email like:
    System:SID
    Client:xxx
    Text:a brief description of the Dump or XML message
    I have setup CCMS and GRMG but I am receiving mails regarding GRMG Heartbeats only and not related to other CCMS alerts.
    I have seen the weblogs available in the SDN.
    Thanks in advance

    Hello Sundara
    You can setup CCMS for J2EE in the following ways
    1. Setup system monitoring in DSWP as you do for ABAP systems
    2. Installing and Registering sapccmsr agents
    3. Availability Monitoing by GRMG Lite and GRMG
    4. Setting up Central Autoreaction
    5. E2E analysis (Solution Manager Diagonostic)
    Four options are excellently elaborated in the following link
    Setting Up your Central Monitoring [original link is broken]
    and E2E
    http://service.sap.com/diagnostics
    If you face any problem in any of these, revert back
    thanks
    Bhudev

  • CCMS alert for update deactivation

    Hi,
    we are planning to set one CCMS alert to get upon deactivation of update in SM13. Any help would be appreciated..
    Thanks
    Dash

    HI ,
    You can use the below MTE Class "CCMS_UpdateStatusClass" and assign the autoreaction method for the same.
    Please revert incase you required more details on the same.
    Regards,
    T.Narsimha

  • CCMS ALERT for SCC4 t-code

    Hi ,
    I want to set CCMS alert in SOLMAN for t-code SCC4 in satellite system ,Please advice.
    Thanks
    Chander

    Hi,
    As far as I am aware no CCMS monitor exists for this. What you can do is to set parameter rec/client = ALL in DEFAULT.PFL this will then enable you to at least go and look who and when it was opened using report SCC -> Utilities -> Change logs
    This will also only be helpful if everyone used individual and no generic user makes the changes.
    Also refer to link this monitors the table where the change entries are made and changes can then in turn be alerted on.
    http://scn.sap.com/thread/931751
    Kind Regards,
    Johan

  • CCMS Alerts for MDM 7.1 distribution folder solman 7.01

    Hi All,
    I want to configure the alerts for the number of files present in distribution folder of MDM. In our landscape the no. of files in distribution folder are in lakhs Is it possible system will trigger an alert when it grows to 50K?
    Please help experts.
    Regards,
    Ankit

    Hi Ankit,
    Yes, this can be done. But for that you have use a script, schedule in cron with 10 mins daily, which will count the number of file and save it log file with some KEYWORD.
    For eg, if the number of file are more than 50 then the log file will contain a message, "warning".
    Now, as soon as agent finds this message in this file, an auto reaction method will be triggered and emails can be sent for notification.
    You can refer below link for more information.
    535199 - CCMS agents: Monitoring log files
    https://help.sap.com/saphelp_nw04s/helpdata/en/65/f3156d443e744abe15dbe14e4e32b5/content.htm
    Regards,
    Divyanshu

  • Central CCMS Alert for Java instance server node crash

    Hi,
    Is it possible to trigger an alert of an Java system server node crash using central CCMS alerts.
    J2EE instance CCMS alert does show some MTEs, however they do not trigger alerts. I got this info from below link
    http://help.sap.com/saphelp_nwce711/helpdata/en/46/11aaf352da14dce10000000a155369/frameset.htm
    Any idea how to trigger the alert for server node crash.
    I understand that server node crash should be investigated for permanent fix, however we need this as a proactive measure to know the crash if they happen.
    Thanks
    Imtiaz

    Hi Imtiaz,
    Do you see any error on the view>status auto-reaction? Have you been able to assign an auto-reaction to this MTE?
    Cheers,
    Maurício

  • CCMS alert for Bckground Job

    Dear Experts,
                        I need to configure mail alert through solman for failed backgrougnd job in R/3 system. Please can anyone share configuration guide.
    Regards,
    Sampath

    Hi Sampath,
    please visit http://service.sap.com/solutionmanagerbp. There you'll find a link to the Best Practice document "Background Job Monitoring with SAP Solution Manager" (number 064). The document is mainly about job monitoring as part of Business Process Monitoring (which I would actually recommend). Nevertheless at the beginning of the document also the CCMS job monitoring is briefly explained.
    Best Regards
    Volker

  • Configuring CCMS alerts for Availablity Monitoring

    Hi All,
    We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
    As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
    All the required RFCu2019s have been defined for data transfer between monitored and central system
    In RZ20,i could see the availablity as 100% for the defined moniored system under  SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
    Not sure whether above path is the place where in we look for alerts
    Please clarify the below points
    i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
    ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that  doesnt exists
    iii) MTE class under which analysis, auto reaction method to be assigned ?
    iv). data collection method and frequency
    v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
    Appreciate your quick response on this
    Thanks,
    vadi

    Hi All,
    Thanks a lot for your reply.
    Still i m having an issue in handling the  RZ20 alerts managemnent
    In RZ20,
    i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
    ii) When i click on open staus for the above node turns to green color
    ii) when i click on current status the node turns to grey color
    I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
    However the dispatching jobs are active in both CEN and monitored (000 client) systems
    Appreciate your response
    Thanks,
    Vadi

  • Trigger alert for open service orders

    Hi,
    We are using CRM 7.0. We have a need where we wan to trigger an alert on BP confirm to say " <customer name> has <#> open service orders". This alert should only be triggered if the customer has at least one open service orders.
    Thanks
    Dan

    Hello Dan,
    This process is descibed also in the RKT material for CRM 7.0, but here is a quick overview of the main steps:
    Create an alert in the Alert Editor that contains the attribute Fact Base - Service Order/Ticket ID, which will show up in the alert editor as [FACTBASE$BT_CURR_OBJ_ID]. At runtime this attribute will be replaced by the ID of the actual open service ticket. Make sure that you also specify the navigation object: type/action BT116_SRVTK:B (Service Ticket:Display).
    Then create a rule in the Rule Modeler using context Intent-Driven Interaction. You would have a condition like, "If current event = BP Confirmed" and an action Trigger Alert, with the ID of your alert above in the parameter.
    One alert will then show up for each open service ticket/order. If there are no open tickets/orders for that customer, no alert will be triggered. Clicking on any alert will navigate to that specifc order/ticket mentioned in the alert.
    Best regards,
    John

  • CCMS Monitor for SMTP-Service via ICM SMTP-Plugin

    Dear all,
    we configured our SAP System for sending emails with the help of transaction SCOT. We are using the SMTP-Plugin brought in by the ICM. Everything works fine. Now we want to report how many emails are sent through that connection. For that we want to connect the SMTP-Plugin to the CCMS. Since I havn't found any documentation of that (the existing documentation is discussing how to configure an ordinary SCOT connection for CCMS), I'd like to ask somebody for help. 
    thanks in advance
    best regards
        Thomas Wetzler

    http://www.spamhaus.org says:
    Mail servers only run spam filters such as Spamhaus PBL on port 25, so if you find you are being blocked by the PBL when you try to send mail to your mail server that means you are not communicating with the mail server on the 'authenticated' port 587 but you're still on port 25. This means your 'SMTP Authentication' is not working correctly.
    http://wiki.gandi.net/en/mail/standard-settings#smtp-account says:
    SMTP Account
    Name server : mail.gandi.net
    Port : 25, 465 (with SSL) or 587 (try one or the other)
    TLS or SSL: yes
    SMTP Authentication : yes, using the same settings as for the POP / IMAP account
    I was trying to use the same settings I have used for several years with Thunderbird and Apple Mail, ie SSL on port 465.
    Is there something wrong with my settings which could be preventing mailx from using port 465?
    A few debug tips would be appreciated.
    Your link causes me to ask:  Does the mailx on Leopard support SMTP directly?

Maybe you are looking for