CDG-01141 ERROR: Module Component Table Usage ... Table usage ... requires primary key column for referential integrity

For some strange reason when I modified a form, (commented out some code in a when-window-activated trigger) I now get the following error.
CDG-01141 ERROR: Module Component Table Usage GR1130A.CUSTOMER.GR_CUSTOMER.GC: Table usage GR_CUSTOMER requires primary key column for referential integrity
I am sure this is not related to my change, but do not know what may have caused this or how to fix it.
Anyone seen this error before? been able to fix it?
Thanks!
Windows 7
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Designer Version 6.5.95.4.8

You know that Developer/Designer 6i is not certified for Windows 7, right? Also, your version is not the latest one, so you can try to install the latest patch set first.
>Table usage GR_CUSTOMER requires primary key column for referential integrity
Check if there is a PK in the table definition (not in the database, but in Designer).

Similar Messages

Updation of table records having 5-6 primary key columns.

I have a table structure having 12 primary composite keys.I have created report + form on this table.My requirement is to update the table by using form items fields.I am taking help of url option on report attribute page of application to fetch data on form page when we click on edit link of report page.Now i am having two problems which are as follows:-
(i)I am unable to update data as requirement is to update 5 to 6 primary fields along with other non primary keys.I tried to create Pl/SQL process which will run update query but this process is not updating values.Is there any way that i could fetch data direct from database table in query rather then taking item values.Is there any other workaround?
(ii)One of the primary key column contains records which have ' , ' in them .For ex:- cluth,bearing.So when i get navigated to edit page i am only getting text displayed as clutch i.e. text before ',' is getting displayed in text field while comma and the text after this is not getting displayed in text field of form page.
Any solutions will be very helpful.
Thanks
Abhi

Hello Abhi,
>> I am unable to update data as requirement is to update 5 to 6 primary fields along with other non primary keys
APEX wizards support a composite PK with up to 2 segments only. For every other scenario, you’ll have to manually create your DML code.
If you have control over your data model, I would listen very carefully to Andre advices. Using a single segment PK is the best practice way. If you can’t add PK to your table, it seems that you’ll have to write your own DML code. The Object Browser option of creating a Package with methods on database table(s) can be a great help.
>> … I am taking help of url option … One of the primary key column contains records which have ' , ' in them …
Using the f?p notation, to pass a comma in an item value, you should enclose the characters with backslashes. For example,
\cluth,bearing\In your case, it should be the item/column notation.
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/concept.htm#BCEDJBEH
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Primary key constraint for index-organized tables or sorted hash cluster

We had a few tables dropped without using cascade constraints. Now when we try to recreate the table we get an error message stating that "name already used by an existing constraint". We cannot delete the constraint because it gives us an error "ORA-25188: cannot drop/disable/defer the primary key constraint for index-organized tables or sorted hash cluster" Is there some sort of way around this? What can be done to correct this problem?

What version of Oracle are you on?
And have you searched for the constraint to see what it's currently attached to?
select * from all_constraints where constraint_name = :NAME;

Error remote table does not contain a primary key

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

CDG-01364 ERROR: Module GR1080: Available width on content canvas 2 (5133)

Forms 6i
Designer
Version: 6.5.95.4.8
Configuration: 4.0.12
Release 4.10
We do use HeadStart though I'm not sure what version or how to determine.
Hi, I am getting this error, when trying to generate in Designer:
CDG-01364 ERROR: Module GR1080: Available width on content canvas 2 (5133) less than minimum allowable width (6631)
I have a content canvas that is not very wide, but I want to center it on the window but Designer will not allow me to set my Block Margin to any value greater than 6 centimeters.
My window is 26 centimeters wide, the canvas my block is on is
I saw an earlier post related to this, but I did not understand the solution.
Any assistance would be appreciated.
Thanks!

Wrong discussion forum. This is more a designer than a headstart issue. Please check Error when compiling form - width of content canvas error if it is the same problem.

VLD-0201:Table has more than one primary key

hi
i'm working with OWB 9.2,I was imported the table from database,when i validating that it is giving message:
VLD-0201:Table has more than one primary key
vld-0209:Duplicate unique key i.e:cust_acc and SYS_C00435 detected.
Can i use this table and generate the mapping with out any errors?
Any help will be very generate.

Hi Ashok,
I'm quite curious how you managed to get a table with 2 PK's.
I tried it myself:
=======================================================
SQL>create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date);
create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date)
ERROR at line 1:
ORA-02260: table can have only one primary key
SQL>ed
Wrote file afiedt.buf
1* create table x(c1 number constraint uk1 unique,c2 number constraint uk2 unique, c3 date)
SQL>/
Table created.
=====================================================
As you can see, trying to create a table with more than 1 PK is impossible. With Unique Key, that IS possible (see second example).
I don't expect mappings to function properly with such an error message.
Is it possible for you to drop the table in the database, correct the definition of the table in OWB and then deploy that corrected version to the database?
If on the other hand the table on the database is correct (i.e. has only one PK) then the import into OWB obviously did not go well and I'd suggest you drop the imported definition and try to import it again.
Cheers, Patrick

Adding primary key column in populated table

Hi all,
I am trying to add a column into a table which is already populated. The column which needs to be added has to be Primary Key.
As expected, oracle popped up the error (ORA-01758) that, a NOT NULL column cannot be added unless the table is empty.
One possibe way is to create a new temp table and then transfer all the current data...renaming the temp table later.
Is there any other way to accomplish this task?
Thanks

Hello,
As error suggested you cannot add a not null constraint on new column to table which is already populated. What else you can do beside you got fairly simple and quick idea of creating a temp table and moving data?
You can add new column but null, update the column with the values and alter the table marking column as not null. But your idea of empty temp table is simple and quick one.
CREATE TABLE my_objects
AS
   SELECT 'my_new_column' my_new, owner
   FROM all_objects
   WHERE ROWNUM < 1;
_Not Null_
ALTER TABLE MY_OBJECTS
MODIFY(MY_NEW NOT NULL);
_Primary key_
ALTER TABLE MY_OBJECTS
ADD CONSTRAINT MY_OBJECTS_PK
PRIMARY KEY
(MY_NEW);Regards

Hi All,How2 delete a pkey for std table and add 2 new primary keys

Hi All,
How2 delete a pkey for std table and add 2 new primary key fields .Please provide me the required procedure .
Thanks&Regards.
Bharat.

Hi Bharat,
First thing is you need to have the access key to change any standard dictionary object/standard programs/ standard transactions.You may get this from your basis person after getting approval from your respective manager.But changing or modifying the standard object is not recommended, but if there is no alternate to meet the business requirement then we have to follow this way only.
Next, you need to check whether this table's primary key is being used in any other table as foreing key or not. If there is, then you must remove this relation and then you can delete the unncessary primary key field from that table.Finally you can add the two new fields and set them as primary key, save, check for any errors and activate.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Add primary key column to fact tables?

Our datawarehouse folks asked me if they could add a primary key column in the BPC fact tables. Anyone know if this is possible??
Edited by: Shawn Freundschuh on Apr 3, 2009 12:27 PM

Well.. based on my expeirence, it is not possible.
When you run admin console, sometimes it will return error message.
I tried it before but you can try it again. Maybe developer changed its behavior.
Thanks.

How to know primary key column name form a table name in sql query

Suppose I only know the table name. How to get its primary key column name from the table name?
Thanks

Views don't have primary keys though their underlying tables might. You'd need to pick apart the view to determine where it's columns are coming from.
You can select the text of the view in question from user_views.

Update enrolled table which has 6 composite primary key

Hi Everyone,
I am trying to update a grade column in table called enrolled which has 6 composite primary key column including SID, TERMYEAR, FACCODE, DEPCODE, COURSENO, SECNO and 2 extra column including GRADE, IDD all of them are of type VARCHAR2 as describe below:
To update this table I used the command below:
UPDATE enrolled
SET grade = :COURSE_BLOCK.GRADE_TEXT
WHERE IID = :GLOBAL.logUserid
AND SID = :COURSE_BLOCK.SID_TEXT
AND FACCODE = :COURSE_BLOCK.FACULTY_TEXT
AND DEPCODE = :COURSE_BLOCK.DEPARTMENT_TEXT
AND COURSENO = :COURSE_BLOCK.COURSE_TEXT
AND SECNO = :COURSE_BLOCK.SECTION_TEXT;
Note: the :GLOBAL.logUserid is a global variable that I assigned the user id when the user log on to the application.
When I run the application and fill out the form in order to update the table this doesn't update the table and if I use SQL*PLUS as well with the values that I use for the form to update the table I get message: o rows updated
Can Someone help please?

Here is the solution.
The problem:
The problem was that the enrolled table was designed in a way that a student can enrolled in the lecture(LEC type column) and Laboratory(LAB type column). When a student is given a grade, it is given a grade for the course 100 (eg: 03-60-100) this course has a lecture and lab. this course belong to the faculty code 03(science) department 60 (computer Science) so when a student register to a course, will register to a lecture and a lab but he will receive a grade for the course 100 lec in this case Oracle couldn't update the table because there was two column with course 100 for that particular student Id
The solution:
There are many solution I believe but my quickest solution is when a student register to the course by default is given a grade 'I' means Incomplete then when the instructor add the grade, he can just update a grade from incomplete to the final grade (eg A) now the code will be to get only the course 100 that has grade and discard that doesn't have grade this means that I need only to make sure that the WHERE Clause grade is not null shown below.
UPDATE enrolled
SET grade = BLOCK_NAME.FIELD_NAME
WHERE grade IS NOY NULL
AND IID = BLOCK_NAME.FIELD
AND faccode = BLOCK_NAME.FIELD
AND depcode = BLOCK_NAME.FIELD
AND courseno= BLOCK_NAME.FIELD_NAME
NAD secno = BLOCK_NAME.FIELD_NAME
AND SID = BLOCK_NAME.FIELD_NAME

Knowing the primary key columns of the given table

Hi,
How can I get the primary key columns of the given table?
Regards,
Sachin R.K.

You can find the constraint_name from all_constraints/user_constraints for constraint_type = 'P' (which is the primary key constraint).
And then see which columns are in for the constriant_name
in all_cons_columns/user_cons_columns view.
Below is the example
select acc.column_name from
all_cons_columns acc, all_constraints ac
where acc.constraint_name = ac.constraint_name
and acc.table_name = 'DEPT' AND acc.owner = 'SCOTT'
and ac.constraint_type = 'P'
Hope this helps
Srinivasa Medam

OMPLUS retrieve table primary key column

I'm trying to retrieve the primary key column associated with a table via OMBPLUS.
The following command successfully returns the PK name
OMB+> OMBRETRIEVE TABLE 'ODS_REGION' GET PRIMARY_KEY
REGN_PKWhen I add the GET COLUMNS clause (as per API documentation), I'm still only getting the pk name.
OMB+> OMBRETRIEVE TABLE 'ODS_REGION' GET PRIMARY_KEY GET COLUMNS
REGN_PKAny suggestions on what I might be doing wrong?

Worked it out. Syntaxt needed is:
OMBRETRIEVE TABLE 'ODS_REGION' PRIMARY_KEY 'REGN_PK' GET COLUMNS
(no GET between table name and PRIMARY_KEY clause)

How to do hibernate mapping for table or view without a primary key

Hi,
Anyone knows how to do hibernate mapping for table or view without a primary key?
thanks.
cc

or you can make all column primary key .Anybody seriously considering that as a good idea should understand the implications:
1. this requires that each row be unique - that's a minor issue normally, but can be a significant problem in some cases
2. in practically all databases, a primary key constraint creates a unique index - this has many implications:
a) in most databases, the index stores a copy of the column data that is indexed - this suggestion therefore more than doubles the data storage required for the data
b) whenever an indexed column is changed, the index has to be maintained - this suggestion then more than doubles the work that each UPDATE statement has to do, since both the table and the index have to be maintained for any UPDATE at all
This might work OK for toy projects, but it doesn't scale well at all...

Error while creating the Unique Index of the Primary Key of an Item

Hi all,
I have deployed a new item (CO_CONTRACTUNIT_PRODUCT) in my publication. The deploy appears to be successfull as the item can be seen in the repository through the Mobile Manager.
The problem occurs when i sync my local DB to get the item offline. While synchronizing, the following error appears, both in the sync window and the log file ol_sync.log.
"ERROR",POL-5130,"11/09/2010 11:43:52","table or view %s.%s not found:CO_CONTRACTUNIT_PRODUCT,CO_CONTRACTID,OD_PRODUCTID,CO_CONTRACTUNITID","DB_ROSHNI"
However, the debug file gives this other error regarding this table.
ALL_INDEX:CREATE UNIQUE INDEX "TPCO_CONTRACTUNIT_PRODUCT_PK" ON CO_CONTRACTUNIT_PRODUCT (CO_CONTRACTID,OD_PRODUCTID,CO_CONTRACTUNITID) -5130Error at C:\ADE\omeprod_ol103021\olite\db\build\win\ocapi\..\..\..\src\ocapi\allindexes.cpp line:329 rc:-5130
Build date Mar 29 2010
okErr=(table or view %s.%s not found)
mess=(CO_CONTRACTUNIT_PRODUCT,CO_CONTRACTID,OD_PRODUCTID,CO_CONTRACTUNITID)
AddLog(-5130 "ERROR",POL-5130,"11/09/2010 11:43:52","table or view %s.%s not found:CO_CONTRACTUNIT_PRODUCT,CO_CONTRACTID,OD_PRODUCTID,CO_CONTRACTUNITID","DB_ROSHNI")
But the index that is being created and is giving the error is the index created automatically with the Primary Key of the table, and so nothing has been modified in that.
The primary key of the table is created with the three columns that are part of the index that is returning the error.
As I could not solve the error, I tried to drop and re-create the item in the repository, but no luck. As a last option, i tried to remove the item from the repository to be able to sync properly again (just like before creating the item), but the error still happens.
Another weird point is that i have tried creating the item in another publication of another database (but with almost equal items), and the item could was downloaded to my local DB without any problem, which makes this problem still more bizarre.
What can it be?
Any help would be great!
Roshni

have you tried unistalling the client and reinstalling it?
schema evolution changes are not always handled correctly please check thread:
Modification of publication item into Mobile Server
i quote from rekounas instructions:
If you are just adding a field, you should only have to run the alter publication item API call.
Here is an old note on schema evolution on different scenarios. The names for the APIs that they use are now deprecated. Use the ConsolidatorManager class and call the method alterPublicationItem("PUBLICATION_ITEM_NAME", "SELECT STMT") :
A) Add column
1. Upload all client data. Clients should not add new data until they are told by the administrator to sync again!!
2. Stop Mobile Server listener
3. Change the Oracle8i/9i database schema (add column)
4. Create a Java program to call the Consolidator Admin API AlterPublicationItem()
5. Start Mobile Server
6. Execute a sync from the client
7. The new column should be seen on the client. Use MSQL to check snapshot definitions.
B) Drop column
1. Upload all client data. Clients should not add new data until they are told by the administrator to sync again!!
2. Stop Mobile Server listener
3. Delete column of the base table in the Oracle database schema
4. Create a Java program to call the Consolidator Admin API DropPublicationItem()
5. Create a Java program to call the Consolidator Admin API CreatePublicationItem() and AddPublicationItem().
6. Start Mobile Server
7. Execute a sync from the client
8. The new column should be seen on the cliet. Use MSQL to check snapshot definitions.
C) Change column datatype
Changing datatypes in a repliatated system is not an easy task. You have to follow certain procedures in order to make it to work. Use DropPublicationItem, CreatePublicationItem and AddPublicationItem methods from the Consolidator Admin API. You must stop/start Mobile Server listener to refresh the cache.
1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
2. Stop Mobile Server listener
3. Drop/create column (do not use conversion procudures) at the base table
4. Call DropPublicationItem(). Check if the ErrorQueue and InQueue no longer exist.
5. Call CreatePublicationItem() and AddPublicationItem(). Check if the ErrorQueue and InQueue reflect the new column datatype
6. Start Mobile Server. This automatically resumes application
7. Client executes sync. This should drop the old snapshot and recreate the new snapshot. Use MSQL to check
snapshot definitions.
D) Drop table
1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
2. Stop Mobile Server listener
3. Drop base table
4. Call DropPublicationItem(). Check if the ErrorQueue and InQueue no longer exist.
5. Start Mobile Server. This automatically resumes application
6. Client executes sync. This should drop the old snapshot. Use MSQL to check snapshot definitions.
E) Add table
1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
2. Stop Mobile Server listener
3. Add new base table
4. Call CreatePublicationItem() and AddPublicationItem() method
5. Start Mobile Server. This automatically resumes application
6. Client executes sync. This should add the new snapshot. Use MSQL to check snapshot definitions.
F) Changing Primary Keys
Chaning PK is a severe operation which must be executed manually. A snapshot must be deleted and recreated to propagate the changes to the clients. This causes a full refresh on this snapshot.
1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
2. Stop Mobile Server listener
3. Drop the snapshot using DropPublicationItem() method o
4. Alter the base table
5. Call CreatePublicationItem()and AddPublicationItem() methods for the altered table
6. Start Mobile Server. This automatically resumes application
7. Client executes sync. The old snapshot will be replaced by the new snapstot using a full refresh. Use MSQL to check snapshot definitions.
G) To Change a Table Weight =>
Follow the procedure below to change the Table Weight parameter. The table weight is used by the Mobile Server/Synchronization to determin the sequence in which client records are applied to the Oracle database.
1. Run MGP to apply any changes in the InQueue to the Oracle databse
2. Change table weight using SetTemplateItemMetadata() method
3. Add/change constraint on the the base table which reflects the change in table weight
4. Synchronize
gl m8

CDG-01141 ERROR: Module Component Table Usage ... Table usage ... requires primary key column for referential integrity

Similar Messages

Maybe you are looking for