CF9 - Solr collection of database - Summaries are prepended with PK UID of record

Hello, everyone.
I've got a CF9 server and created a few Solr collections from within CFAdmin, then used CFINDEX to update the collection with database records.
No matter what I do, when trying to access the Summary the data is prepended with the PK Unique ID of each record. Is there a way to prevent this behaviour?
Thank you,
^_^

The reason I ask is because the summary is limited in character length, and the UID is a 36 character long string that is pushing 36 characters of the actual summary off the end. I'd like to get as much of the actual summary as possible.
Thank you,
^_^

Similar Messages

HT1267 i have purchase an iphone but no audio and video are available with it .can i record video and audio by this device

i have purchase an iphone. but no audio and video are available with it .can i record video and audio by this device
<Personal Information Edited by Host>

Hello JessCastle,
Start with the article below to troubleshoot issues with the microphone on your iPhone. If none of it works then contact Apple Support to further help you out.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Take it easy,
-Norm G.

How to get the location of a pageitem when there are pageitems with same UID?

There are two text frames with same UID but on different pages( also defferent spreads ). What I want to know is how I can get the location of them both.
The following code can only get the location of the first frame because the second frame has the same UIDRef with the first one(because they are in one document with same UID) .
    InterfacePtr<IGeometry> splineGeo(ItemRef, IID_IGEOMETRY);
    PMMatrix itemPMMatrix = ::InnerToPasteboardMatrix( splineGeo );
    PMRect itemPMRect = itemGeo->GetStrokeBoundingBox( itemPMMatrix );
Is there any way I can get the second frame location?
Thanks a lot.

No.
Just copy the pageitems from master page to document page.

All the secondary database files are generated with mdf extensions

Hi,
See I have set up DR Server with SQL database. The problem is that when it creates new database on DR Server, all the secondary files, which are with .ndf extension on primary servers, gets created as .mdf files instead of ndf files.
Can anybody tell me how to solve this problem.
Will it create any problem when the secondary(DR Server) act as Primary server in case of failure.

Hello,
you can easily rename the files by following this procedure (see note 151603 for more details):
- detach the database from the server
- rename the files to the naming convention you like
- attach the database with the new names again
I do not exactly know what you mean with DR Server, but i assume that you mean
Log Shipping or Database Mirroring. Both are not affected from the different filenames as they are using only the internal database name (e.g. PRD).
Regards
Clas

Solr collections disappearing

Yesterday I created 7 solr collections. I loaded them up with data and started testing the multi-collection search against them using a webservice to access the search. I tested the searching from my local machine and was happy. This will finally resolve an issue we have had for 8 million years!!! This morning I came in and tested it again, still good. So I pushed the update to a semi-live state and allowed some traffic to it. Almost immediately I started getting "Cannot perform web service invocation search." errors. When I went to the CF administrator to see what was going on, none of the collections were listed. All the physical files still existed, but the collections were not longer registered. I restarted the Solr Service and they all came back. Again, I pushed a little traffic and they disappeared immediately.
There are no entries in the error logs for the server doing the search nor for the server trying to serve the search.
The server is running CF9.0 enterprise, 64-bit with 7GB of ram to the jvm.The largest collection is 554,000 documents.
Has anyone seen this behavior before?
Thanks,
Scott

for anyone else that runs into this issue, I found the solution in an article by Mark Kruger at http://www.coldfusionmuse.com/index.cfm/2010/4/4/solr-troubleshooting-coldfusion-9.
The error was that while CF had plenty of ram in the jvm, solr only allocates 256MB by default. By updating the solr.lax configuration file to allow more ram to solr, I now have stability and a great solution to our problem!
Scott

When Hard-coded server name and data base name are replaced with variables , execute process task does not produce the result

Hi All,
I am trying to load shape file into a sql spatial table. A execution process task is used to run the ogr2ogr.exe program.
This is how the process tab looks like .
Executable : C:\gdal_ogr2ogr\bin\gdal\apps\ogr2ogr.exe
Argument : -f MSSQLSpatial   MSSQL:server=SQL-ABC-DEV;database=MYSIMPLE_Dev;Trusted_Connection=True;\\mypath\files\shares\Data\www.mypage.htm\my_sample_file.shp
Success value : 1
For above settings, package runs fine. The spatial table is created in SQL server db. However when hard-coded SQL server name and database name are replaced with global variables , the spatial table is not created in the database. Yet the package runs fine.
It does not throw any errors. (I am using another variable for full file path. It is not causing any errors though)
" -f MSSQLSpatial   MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True;"+ @[User::Filepath] + "\\my_sample_file.shp"
Both variables are string type. Can anyone tell me what I am doing wrong here please?
I am running this in VS 2012.
Thanks for your help in advance..
shamen

There should be a single space just after True:
before
" -f MSSQLSpatial   MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True;"+ @[User::Filepath] + "\\my_sample_file.shp"
after keeping the space
" -f MSSQLSpatial   MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True; "+ @[User::Filepath] + "\\my_sample_file.shp"
Thanks
shamen

CF9 - multiple Solr collections search, remove dupes

Hello, everyone.
I'm trying to search more than one Solr collection for a keyword (let's say "Item A"), but I want to remove any duplicates and keep the ranking.
Hypothetically, let's say each collection has "Item A" in it, each ranked slightly different in their respective collection (99.9, 92.7, and 89.5). How would I remove the two lower ranked "Item A"'s from the CFSEARCH?
Thank you,
^_^

I think I've got it.
For anyone else who has this same need, try QoQ.
<cfsearch name="cfSolrSearch" collection="collectionOne,collectionTwo,collectionThree" criteria="Item A">
<cfquery name="removeDupes" dbtype="query">
SELECT DISTINCT title, cast(score as decimal) as score
FROM cfSolrSearch
ORDER BY score DESC
</cfquery>
<cfdump var="#removeDupes#">
^_^
PS. In the first post, I mentioned "rank"; I meant "score".

Odd QoQ issue when querying Solr collection

Hello, everyone.
I've got a query of query issue that has me stumped. Maybe I'm just missing something very simple, but this has got me really confuzzed.
I have a Solr collection that is indexing a few tables in an Oracle database. Let's call it "hdq", for this discussion.
I wrote a semi-complex query of related tables from which the CFINDEX is using to index the data. This is working just fine.
I created the Solr collection in the CF9 CFAdmin, and am using the following to index with:
<cfindex action="refresh" collection="hdq" key="QUESTION_ID" type="custom" title="QUESTION_TITLE" query="search_questions" body="QUESTION_TX,QUESTION_TITLE,CATEGORY_NM,TAG_NM,ANSWER_TITLE,ANSWER_TX"
custom1="QUESTION_STATUS" custom2="TAG_NM" custom3="QUESTION_STATUS" custom4="QUESTION_TYPE" category="CATEGORY_NM">
Then I do a CFSEARCH and name it "hd_questions". Again, so far, so good, no problems.
If I do a CFDUMP of "hd_questions", one of the columns is KEY (which is QUESTION_ID in the database.) If I CFOUTPUT the collection, KEY is there.
If I QoQ the CFSEARCH of the collection and use SELECT custom3, score, summary, context, key FROM hd_questions, I get an error message that
Encountered "key. Incorrect Select List, Incorrect select column,
.. then it gives the line number of the page that produced the error, and
<cfquery dbtype="query" name="hd_results">
Am I missing something simple, here? KEY is in the collection, I can see it in CFDUMP, I can see it in CFOUTPUT. But if I query the collection and try to select KEY, there is an error.
Any thoughts/ideas?
Thank you,
^_^

Key is a reserved word in Coldfusion, so can't be used directly in a QoQ without escaping it. Try wrapping it in [ ] instead, i.e. [key]
It may also help to give it an alias too, e.g. SELECT [key] AS someKey
See the list of reserved words here: http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec173d0-7f ff.html and the QoQ guide to using reserved words here: http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec0e4fd -7ff0.html#WSc3ff6d0ea77859461172e0811cbec22c24-7008

Error while trying to create a Solr collection (java.io.IOException: The device is not ready)

Hello, everyone.
I'm trying to create a .cfm document that will erase a specific Solr collection and then re-create it, index it, and optimize it.
The delete works flawlessly.
Unfortunately, creating it isn't working, at all. I get the following message:
Unable to create collection publicsearch - An error occurred while creating the collection: java.io.IOException: The device is not ready.
This is a Windows 7 server running Apache and CFServer 9.0.1 (the version before Verity was cut.) I'm not getting any more details than the one error message. Any idea of what could be causing this? I've Googled this and I'm seeing a lot of issues similar, but not quite what I have happening.
Thanks,
^_^

Nevermind.. no one bothered to inform the developer that the path to the collection AND the path to the directory that the collection is for are different on this other server.
Fixed.

The product version and database version are not compatible

The following simple program gets an exception {The product version and database version are not compatible} its very hard to proceed from here. Does anybody know what cause this?
Best Regards
Jan Isacsson
using System.Collections.ObjectModel;
using Microsoft.MasterDataServices.Deployment;
using Microsoft.MasterDataServices.Services.DataContracts;
namespace MdsDeploy
    class Program
        static void Main(string[] args)
            try
                ModelReader reader = new ModelReader();
                Collection<Identifier> models = reader.GetModels();
                foreach (Identifier modelId in models)
                    Console.WriteLine(modelId.Name);
            catch (System.Exception ex)
                Console.WriteLine("Error: " + ex.Message);
            Console.ReadKey();

Hi Jan,
For the error "The product version and database version are not compatible", as Emma said, the version number of the Service does not match the database schema version.
In your scenario, which version of database are you using? Please note that MDS update required after SQL 2012 SP1 installation, please refer to the links below to see the details.
http://byobi.com/blog/2012/11/mds-update-required-after-sql-2012-sp1-installation/
http://msdn.microsoft.com/en-IN/library/gg488708.aspx
Regards,
Charlie Liao
TechNet Community Support

Can a Solr collection index CLOB?

Hello, everyone,
Right now we are trying to figure a way to increase capacity for varchar2 beyond 4000 bytes. One option on the table is to convert the varchar2 to CLOB. But that makes me wonder if a Solr collection can index CLOB??
V/r,
^_^

Anyone?
^_^

Solr Collection contains 0 documents

I am using CF Ver 9.0.0
I have created a Solr Collection via CF Admin
Once Indexed the Solr collection shows 65262 KB data but 0 documents. This is consistent with other Solr collections but not their verity counterparts.
Documents are located on a separate drive and I am indexing txt, pdf, doc, and xls
Am I doing something wrong?
Thanks

Is this Solr collection created through Verity collection document? If so then it can be due to incomplete migration from Verity to Solr..
As you mentioned, Documents are located on a separate drive. -> Hope you are referring it to local drive on that machine, not any remote machine.. Ideally, it would be able to index the document from local drive from same machine..

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

File-to-rfc ..database tables are not updating??

hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded   --------->Zrfc 0..unbouned
...id                  --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id                ---------->Ztimeticktes-item-operation
.....closingdate       ----------->Ztimeticktes-item-exec_fin_date
.....status            ----------->Ztimetickets-item-fin_conf
.....comment           ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
Ram

Hi..
my mappis is like this..
message                   message
.message1                         message1
..workorders 1..1
..order 1..unbounded   -
>Zrfc 0..unbouned
...id                  -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id                -
>Ztimeticktes-item-operation
.....closingdate       -
>Ztimeticktes-item-exec_fin_date
.....status            -
>Ztimetickets-item-fin_conf
.....comment           -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram

CF9 - Solr collection of database - Summaries are prepended with PK UID of record

Similar Messages

Maybe you are looking for