Cfdocument and conditional headers

Using cfdocument I am creating a PDF that starts with an
information page that requires no header. On each of the following
pages we want a header to appear.
The problem is that the header is appearing on all pages,
including the first. The code I'm using inside of cfdocument is
posted below.
Thanks for any suggestions.
-Scott

The blog article does only work if you have a new section for each report.
This can be achieved with a for-each@section statement.
(Search the user guide for @section -
Section Advanced Reports - Batch Reports
and
Controlling the Placement of Instructions Using the Context Comma)
You can also use Word Section breaks to change headers and footers.
Please also look in the Userguide under
Createing an RTF template ->Template Features->Last Page Only Content
Klaus

Similar Messages

  • I have purchased a movie and it has downloaded.   Next, I get a screen the says Terms and Conditions. It says to click Agree but I. Can not find Agree anywhere in the document.  how do I move forward and access the movie?

    I have purchased a movie and downloaded it. Next I get a screen that says Terms and Conditions and tells me to read and click on Agree. I cannot find the Agree anywhere in the document.  How do I move on and view the movie?

    Go to Settings>General>Usage. How much space does it show you have?
    If you connect your phone to your computer, what does iTunes say is on your phone? Do you see a large amount of "Other"? If so, you may have a corrupted database. You'll need to sync your phone then restore it as NEW (not from back up) then re-sync your data).

  • Terms and conditions not getting displayed on the last page

    Hi All,
    I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
    Can you please help me how to make the terms and conditions get printed on the back side of the last page.
    Thanks,

    I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
    I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
    If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
    In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

  • Using multiple 'and' conditions in a SQL query

    Is it possible to reduce the SQL required to query using multiple 'and' conditions, e.g. I have a query like the following:
    select stat.personal_id, appt.username, appt.password, apps.rgn_apt_id, apps.apy_apn_id
    from apy_ast_application_status stat, rgn_usr_user appt, rgn_aps_applications apps
    where stat.apy_apn_id = apps.rgn_apt_id
    and apps.rgn_apt_id = appt.rgn_apt_id
    and stat.application_completed is null
    and stat.application_started_date > '01-MAY-11'
    and stat.amount_paid is null
    and stat.personal_details = 'C'
    and stat.further_details = 'C'
    and stat.education = 'C'
    and stat.employment = 'C'
    and stat.personal_statement = 'C'
    and stat.choices = 'C'
    and stat.reference = 'C'
    and stat.student_finance = 'C'
    Is there a way, to reduce all the multiple 'and' queries, to be read from say one line? If you know what I mean.......

    Ah, Ok this looks nice, thanks very much. It doesn't quite run as is because the stat.amount_paid query value is 'is null', while the others are 'C'. I tried amending the relevant line to various versions of the following:-
    in (select 'is null' 'C','C','C','C','C','C','C','C' from dual)
    which doesn't work.
    I can get the following to work so I am assuming that the it is not possible to use different query values within the brackets of the 'in (select....' statement?
    select stat.personal_id, appt.username, appt.password, apps.rgn_apt_id, apps.apy_apn_id
    from apy_ast_application_status stat, rgn_usr_user appt, rgn_aps_applications apps
    where stat.apy_apn_id = apps.rgn_apt_id
    and apps.rgn_apt_id = appt.rgn_apt_id
    and stat.application_completed is null
    and stat.application_started_date > '01-MAY-11'
    and stat.amount_paid is null
    and (stat.personal_details, stat.further_details, stat.education,
    stat.employment, stat.personal_statement, stat.choices, stat.reference, stat.student_finance)
    in (select 'C','C','C','C','C','C','C','C' from dual)
    Thanks for everybodys help - the suggested alternatives seem so much more elegant

  • I downloaded a movie from itunes on my ipad.  In the downloaded area where the movie should be, I only get a link to "iItunes Terms and Conditions", no movie.  There is nowhere to accept the terms and conditions.

    I downloaded a movie from itunes on my ipad. In the downloaded area where the movie should be, I only get a link to "iItunes Terms and Conditions", no movie. There is nowhere to accept the terms and condotions.

    Nevermind, the movie was there in the Videos app, not itunes downloads.  Thanks.

  • Since downloading the most recent version of iTunes, I have to accept the software terms and conditions every time I open iTunes

    Since installing the most recent version of iTunes, I have to accept the software terms and conditions every time I go in to iTunes.  I sign in to my account, but when I re-open iTunes, as well as having to accept the terms and conditions before continuing, I find that iTunes has logged me out of my account.  None of this has happened before.  I am using a PC with Windows 8.

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

    'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

    Hi munaxnight,
    If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    Force an app to close in iOS
    Next, I would try restarting and if needed resetting the iPhone -
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue is still present, you may want to restore the iPhone as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • How to get the salesprice and condition for a customer / material / date

    Hi all,
    how can I get the correct price and condition for a customer / material / date ?
    I know this is possible using the BAPI_SALESORDER_SIMULATE, but this bapi is using to much ressources on the system.
    I'm trying to get the correct price and condition WITHOUT using that BAPI.
    Does anyone know how it is possible ? As said before : I have the customer, material and a date.
    thanks in advance for your help

    Hi
    You need it because it's possible to have a complex pricing procedure, and you can't do it with a simple select on a table. Think that you can have pricing requirements, formulas (ie: VOFM) and so on in your pricing procedure (tcode V/08).
    I hope this helps you
    Regards
    Eduardo

  • Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

    Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

       Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

  • Why can't I download Textplus on my 4th generation iPod touch?  It's not jailbroke or anything but it says the terms and conditions have changed. When I agree, it says your session has times out. Try again. But it doesn't give me an option to try again an

    It's not jailbroke or anything but it says the terms and conditions have changed. When I agree, it says your session has times out. Try again. But it doesn't give me an option to try again and has a done button underneath it. I press done. The textplus app says "Waiting..." and is gray. What can I do to download this app?

    iTunes has to contact Apple to send your agreement to the new conditions, but your security software has to allow this contact. If blocked, you'll get a time out message. Follow the instructions here to check your security software settings: iTunes for Windows: Troubleshooting security software issues

  • TS1717 iTunes "Terms and Conditions Have Changed Before you can proceed you must accept the terms and conditions" is on an infinite loop.  No matter how many times I agree, when I go to update my apps the terms and conditions have changed link reappears.

    Can anyone help me?  Suddenly (i.e. just a few minutes ago) this problem has appeared.  I attempted to update two apps on my iPad.  The Terms and Conditions agreement comes up, I read the terms and conditions, I agree to them, I click AGREE, it disappears, I reclick on update and the Terms and Conditions agreement appears and we start the mobius strip all over again.  I tried to see if it was just on my iPad by trying to download a new app on my iPhone.  same problem.  Anyone have advice on how to resolve this issue?  Oh, and of course, Apple has declared my two new devices to be out of warranty and want me to pay to ask how to fix a problem caused by their own software.  Lovely.  so helpful.  Hey Cupertino ... are you paying attention?  I might start tweeting about this.

    I updated the software on my iphone4 tonight and ran into this same endless loop - "itunes terms & conditions have been changed" - go to itunes, aceept - back to the "T&C have been changed message" with no ability to do anything in the app store until I accepted the new terms.
    While not a very direct solution, I was able to finally accept the terms in a way that seem to register with apple by making a purchase through iTunes on my computer. This forced me through updating my payment information and updating my iTunes software to the latest edition (which I had not yet taken the time to do).  After doing both of these, iTunes took me through the terms & conditions on two separate pages, but ultimately allowed me to purchase my song.  Once I completed these steps, it fixed the problem on my phone, so now I can update my apps and download new ones without running into that loop.
    Hope this helps!!!

  • HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

    When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

  • Can't get past Change in Terms and Conditions when trying to download from the App store

    So, I noticed that this was a problem back in 2012, and was somehow resolved, but I am experiencing it now on my Macbook Pro. When I try to download and app, a window pops up stating that Apple has changed its terms and conditions and that I need to agree to them. So I scroll through, open to full frame in order to check the agree box, and nothing happens. Is there another box I am missing? Should I be redirected to another screen? When I click back to purchase, it asks me again to read the terms and conditions.
    This same thing happened on my iphone 5, but when I clicked agree, it asked me a few more times, but then allowed me to continue with updates.

    Apple servers are overloaded with the release of iOS 7.

  • How to change the text of Terms and Condition of PO.

    I have given an task to add some text to the current TERMS and CONDITIONS (T&C) of a PO. Idea is to decrease the size of fonts also as after adding the new paragraph, the T&C itself will print on 2 pages. So decrease in font size is needed to fit the T&C on one page.
    Kindly tell me how I can add text to T&C of PO and also decreasing the size of fonts
    Thanks,
    mini

    yes SO10 wont ask for the CTS.
    Please follow this steps.
    Run the report RSTXSCRP
    Please fill the selection screen.
    the name of the text should be in this fiels, Text key - name
    Hit execute
    The required should be selected and hit enter
    Push the push button on the top left - Trsfr texts to corr
    It will ask for a request.
    You will get the CTS and then move ahead.
    Shreekant

Maybe you are looking for