Chang Charactor set WE8MSWIN1252 to AL32UTF8 for creating RCU

Hi
how can I chang the Charactor set for creating RCU,
Thanks,
Sri.

Balaa wrote:
Sri,
Follow the below steps,
conn / as sysdba
col parameter format a30
col value format a30
SELECT view_name FROM dba_views WHERE view_name LIKE '%NLS%';
SELECT * FROM v$nls_parameters;
SHUTDOWN IMMEDIATE;
STARTUP RESTRICT;
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0;
ALTER SYSTEM SET AQ_TM_PROCESSES=0;
ALTER DATABASE CHARACTER SET AL32UTF8;
-- if the above fails:
ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8;
SHUTDOWN IMMEDIATE;
STARTUP;
SELECT * FROM v$nls_parameters;
Thanks,
Balaa...
Absolutely the INCORRECT thing to do !!
This will result in corruption of your database that you cannot recover from.
Review MOS Doc - 260912.1
Difference between NLS_CHARACTERSETAL32UTF8 & NLS_CHARACTERSET WE8MSWIN125
Supported methods are documented - Character Set Migration

Similar Messages

T-Code for changing the default Exchange Rate reference for creating PO?

Dear All,
Can somebody kindly give me the T-Code for changing the default
Exchange Rate reference for creating PO? Is there a Step by Step
procedure before changing the default exchange rate?
Thank you in advance.
Regards,
Gopesh

Hi
There is not such Tcode to change the default exchange rate from the PO.
If you want you can confugure the exchange rate in the following path in the IMG,
SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
Hope it helps you.
Cheers
Umakanth

Setting default zoom level for creating bookmarks

I am creating a PDF file in a couple of steps. The main text is created from Word, which gives me bookmarks automatically set to "Inherit Zoom." I also create subsets of tables and figures by "combining files in Acrobat" from Windows Explorer. That step creates bookmarks automatically that are set to "Fit Width." I then add the pages from the tables and figures into the PDF created from the Word document. The bookmarks come in the proper location, but the zoom level stays "Fit Width." I'd like it to be either "Inherit Zoom" or "Fit Page." Is there a way to set the default zoom for bookmark creation so I don't have to manually change each bookmark?

It seems like the DVT by default zooms to fit the available real estate. But is it possible to set a fixed zoom level (say 75%) even if the node does have 100% zoom level. We would like to show the 100% zoom level only on hover to the node. But by default, wanted to to set the viewer to always show 75% or 50% zoom level.

Vendor Master- Mass change to set block function 02 for selected PurchOrg

Hello,
We are using SAP 4.7.
We want to do Vendor Master- Mass change to set block function 02 (T code- MK05 in block for quality reasons) for selected Purchasing Organizations to approximately 2000 number of vendors. I tried this using mass maintenance (T code XK99), but in this case block function of all purchasing organisations gets changed. We want it for certain purchasing organisations only. Kindly suggest the solution.
In case I have to go for a development can you please suggest any functional module/ BAPI?
Can I achieve this using mass maintenance functionality (XK99)?
Waiting for your expert openion,
Regards,
Milind Dumbre

Using the block function in XK05 will block the vendor for all purchasing organizations (as mentioned in the documentation of the field). What you can do is to use purchasing block for the selected purchasing organization.
The field is LFM1-SPERM, and this can be done via mass maintenance using XK99.
Hope this helps.
Regards,
Aroop

Running instances with different character set WE8MSWIN1252 and AL32UTF8

We have db instances running AL32UTF8 character set and our applications are built around it, however we have request to create instances using WE8MSWIN1252 character set for another application without bringing in new h/w (server).
what are the ways to implement it?
Edited by: raygear on Aug 23, 2012 7:06 PM

What is the problem? Run DBCA in the advanced mode and specify the required database character set for the new database.
-- Sergiusz

Using ECN for creating Bom

Hi Friends
We usually use ECN for making any changes to Bom or Routing. Any idea whether change number could also be used for creating Boms, Routings? Or rather, when we do not put an ecn number while creating Bom, system should give an hard stop.
thanks and regards
L.Ramesh

Hi Mr.Ramesh,
As u asked,ECN can be made as a mandatory field while creating & changing a material,BOM,Routing.
<b>1.For material,ECN can be made as mandatory by using a field exit.For Field exit,you can check in SE37.
2.For BOM,Check in SPRO-Prod-Basic Data-BOM-Control Data for BOM-Define modification parameters(OS27).Also Check in OS25,for more settings.
Check whether there's a tick mark in the check box for EC Management Active.
3.For routing,Check in OP5A,Prod-Basic Data-Rotuing-Control Data-Define Field Selection.</b>
I hope this will be helping you.
If useful reward your points.
Thanks & Regards
Mangal

Need to change character set from WE8MSWIN1252 to AL32UTF8.

Hi,
We have installed the database with Character set WE8MSWIN1252. But off late we understood that client requirement is AL32UTF8. Is there any way to change in easy method?
Thanks in-advance.
Rgds
DBA.

Pl also see these Docs
AL32UTF8 / UTF8 (Unicode) Database Character Set Implications          [Document 788156.1]
Changing the NLS_CHARACTERSET to AL32UTF8 / UTF8 (Unicode)          [Document 260192.1]
If you are using EBS, then also see
For 11i - Appendix A of "Oracle Applications 11i Internationalization Guide          [Document 333785.1]"
For R12 - Appendix A of "Globalization Guide for Oracle Applications Release 12          [Document 393861.1]"
Changing the characterset of an existing database/application is not a trivial task - will require thorough planning and testing.
HTH
Srini

HT204053 i accidently set up one account for i cloud and one for itunes. suggestions on how do i update this to only the one. please on how do i change my icloud to be the same as my itunes acct. thanks

i accidently set up one account for icloud and one for itunes; suggestions on how to correct this and use just one account for both.... thanks

If you want to change your iCloud ID to another existing ID you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account. To do this, first go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
This will not move your photo stream, however. If you have photos in photo stream that aren't in your camera roll and that you haven't backed up anywhere else you will need to save these before deleting the account. To do this, open your photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll. You can then delete the iCloud account and your photos will stay in your camera roll.

Unable to migrate table, character set from WE8MSWIN1252 to AL32UTF8

Hi,
On our source db the character set is AL32UTF8
On our own db, we used the default character set of WE8MSWIN1252 .
When migrating one of the table, we get an error of this: ORA-29275: partial multibyte character
So in to alter our character set from WE8MSWIN1252 to AL32UTF8, we get this error:
ALTER DATABASE CHARACTER SET AL32UTF8
ERROR at line 1:
ORA-12712: new character set must be a superset of old character set
I would sure not like to reinstall the db and migrate the tables again. Thanks.

See this related thread - Re: Want to change characterset of DB
You can use the ALTER DATABASE CHARACTER SET command in very few cases. You will most likely have to recreate the database and re-migrate the data.
HTH
Srini

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Mass Change of Sets for Report Painter/Writer Reports

Hi,
We have upgraded our system from 4.6c to ECC 6.0. We are using more
than 40 Report Painter/Writer reports which in turn are using Sets.
However, these sets are containing reference to a Table which we want
to change for all the set enmasse. e.g. If currently the sets are using
Table Reference "ABC", we want to change it to "XYZ" because the
table "ABC" is not at all existing in our new system ECC 6.0.
Even we are unable to change the sets through T.Code GS02 as the table
itself is not existing. And as the table is not existing, the Reports
are giving hard errors saying that the sets do not exist.
Kindly request you to guide us in this regard.
Thanks in advance,
Shalin Shah

Looks like you have to create new sets and assign them in the report replacing the old ones.

Without to change the setting.how to set the decimal place to 7 for an UDF.

Without to change the setting, how to set the decimal place to 7 for an UDF?

Hi
Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
So i think you can not set the decimal places without changing the setting in display parameters.
i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
Hope it helps you
Regards
Vishnu

Group policy preference for creating printers setting the wrong printer as default

Hi
We have a a group policy preference applied to users. At the moment we create a shared printer and set it as default for all users in a specific OU. Now we need to add another shared printer. I have updated the policy and set it to create
the new shared printer and have set item level targeting to the same OU as the first printer. I want to keep the existing printer as the default, however when the policy runs, the new printer is created fine but it is set as the default
printer. Is this because it has been added last ? There doesn't seem to be a way of changing the order that the printers are applied.
Both printers are Shared printers and are set to Create
The existing printer (printer A) is set as the default printer. It is targeted at the London OU.
The new printer (printer B) has NOT been set as default. It is targeted at the London OU.
No other options have been set.
When the policy is applied both printers are added but printer B is being set as the default.
Any help would be appreciated.
Thanks
G

Hi G,
>>however when the policy runs, the new printer is created fine but it is set as the default printer. Is this because it has been added last ? There doesn't seem to be a way of changing the order that the printers are applied.
Before going further, what's the operating systems of our clients? Here, I need to double confirm that the checkbox of
Set this printer as the default printer... is not selected in the new GPP Printer item. Besides, we can change the orders of the printer items. To do this, select the printer item, right click, click All Tasks, and choose Move Up or Move
Down to change the order.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Change Oracle XE from WE8MSWIN1252 to AL32UTF8

I want to change the character set of Oracle XE 10g on my machine from WE8MSWIN1252 to AL32UTF8. I understand I need to scan, change my NLS_LANG and export and them import into new XE with Universal character set.
I need some more details to these steps if someone can help out.
My current Oracle XE details:
NLS_LANGUAGE - AMERICAN
NLS_TERRITORY - AMERICA
NLS_CHARACTERSET - WE8MSWIN1252
I want NLS_CHARACTERSET to be AL32UTF8.
Thanks,

Hi everbody,
Really OracleXE dont suport character convertion.
But I get the binary CSSCAN from another Oracle 10g Enterprise and copy to server of XE in $ORACLE_HOME/bin.
With this, I copy also CSALTER.PLB and CSMINST.SQL to ?/rdbms/admin and now, I have the scripts.
So, I run following the "howto" and read .log, .err and .out files generated from log=
If you receive the message "Checking or Converting phrase did not finish successfully", check the .err file and drop the tables listed as "with error". After this, the process run without erros and YES, the database is CHANGED.
I do this and I can afirm: this process works!
Ederson.Oliveira
www.rwit.com.br

How to block set of vendors for creating PO but allowing them to create RFQ

Dear Experts,
I want to block the set of vendors created by GS01 for creating Purchase order but allowing them for creating RFQ. I tried using XK05 but its blocked even vendor for creating RFQ. So is there any way to do so in my business practise ?
I already tried several way but no one is fullfilling my requirement. So i need all you experts valuable input on this.
Regards
Arun

Hi Aleksey Tkachenko,
Well i am also trying to do the same using the badi you had told me but my query is how can i do this if i create a set of vendor using gs01 or provide an interface to user to update the vendor account to whom we dont want to allow for creating PO but they can create RFQ. and using this BADI how i can read this set of account of vendors?
Can you tell me how to handle this scenario using any of the method?
Regards
Arun

Chang Charactor set WE8MSWIN1252 to AL32UTF8 for creating RCU

Similar Messages

Maybe you are looking for