Change background color of alternating rows in listview
Hi all,
Does anyone know how to change the background color of alternating rows in a listview in Visual Basic 2013?
Best regards,
Randy Boulter
You can set the OwnerDraw property of the ListView to true and use the DrawItem event:
Private Sub ListView1_DrawItem(sender As Object, e As DrawListViewItemEventArgs) Handles ListView1.DrawItem
e.DrawDefault = True
If (e.ItemIndex Mod 2) = 1 Then
e.Item.BackColor = Color.FromArgb(220, 220, 220)
e.Item.UseItemStyleForSubItems = True
End If
End Sub
Similar Messages
-
Changing background color in JTable, only changes one row at a time...
I'm trying to change the color of rows when the 5th column meets certain criteria. I think I'm very close, but I've hit a wall.
What's happening is the row will change color as intended when the text in the 5th column is "KEY WORD", but when I type "KEY WORD" in a different column it will set the first row back to the regular colors. I can easily see why it's doing this, everytime something is changed it rerenders every cell, and the listener only checks the cell that was just changed if it met the "KEY WORD" condition, so it sets every cell (including the previous row that still meets the condition) to the normal colors. I can't come up with a good approach to changing the color for ALL rows that meet the condition. Any help would be appreciated.
In this part of the CellRenderer:
if (isSelected)
color = Color.red;
else
color = Color.blue;
if (hasFocus)
color = Color.yellow;
//row that meets special conditions
if(row == specRow && col == specCol)
color = color.white; I was thinking an approach would be to set them to their current color except for the one that meets special conditions, but the two problems with that are I can't figure out how to getColor() from the table, and I'm not sure how I would initially set the colors.
Here's the rest of the relevant code:
public void tableChanged(TableModelEvent e)
int firstRow = e.getFirstRow();
int lastRow = e.getLastRow();
int colIndex = e.getColumn();
if(colIndex == 4)
String value = (String)centerTable.getValueAt(firstRow, colIndex);
// check for our special selection criteria
if(value.equals("KEY WORD"))
for(int j = 0; j < centerTable.getColumnCount(); j++)
CellRenderer renderer =
(CellRenderer)centerTable.getCellRenderer(firstRow, j);
renderer.setSpecialSelection(firstRow, j);
import javax.swing.table.*;
import javax.swing.*;
import java.awt.Component;
import java.awt.Color;
public class CellRenderer extends DefaultTableCellRenderer
int specRow, specCol;
public CellRenderer()
specRow = -1;
specCol = -1;
public Component getTableCellRendererComponent(JTable table,
Object value,
boolean isSelected,
boolean hasFocus,
int row, int col)
setHorizontalAlignment(JLabel.CENTER);
Color color = Color.green;
if (isSelected)
color = Color.red;
else
color = Color.blue;
if (hasFocus)
color = Color.yellow;
if(row == specRow && col == specCol)
color = color.white;
//setForeground(color);
setBackground(color);
setText((String)value);
return this;
public void setSpecialSelection(int row, int col)
specRow = row;
specCol = col;
}If I'm still stuck and more of my code is needed, I'll put together a smaller program that will isolate the problem tomorrow.That worked perfectly for what I was trying to do, but I've run into another problem. I'd like to change the row height when the conditions are met. What I discovered is that this creates an infinite loop since the resizing triggers the renderer, which resizes the row again, etc,. What would be the proper way to do this?
Here's the modified code from the program given in the link. All I did was declare the table for the class, and modify the if so I could add the "table.setRowHeight(row, 30);" line.
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.border.*;
public class TableRowRenderingTip extends JPanel
JTable table;
public TableRowRenderingTip()
Object[] columnNames = {"Type", "Company", "Shares", "Price", "Boolean"};
Object[][] data =
{"Buy", "IBM", new Integer(1000), new Double(80.5), Boolean.TRUE},
{"Sell", "Dell", new Integer(2000), new Double(6.25), Boolean.FALSE},
{"Short Sell", "Apple", new Integer(3000), new Double(7.35), Boolean.TRUE},
{"Buy", "MicroSoft", new Integer(4000), new Double(27.50), Boolean.FALSE},
{"Short Sell", "Cisco", new Integer(5000), new Double(20), Boolean.TRUE}
DefaultTableModel model = new DefaultTableModel(data, columnNames)
public Class getColumnClass(int column)
return getValueAt(0, column).getClass();
JTabbedPane tabbedPane = new JTabbedPane();
tabbedPane.addTab("Alternating", createAlternating(model));
tabbedPane.addTab("Border", createBorder(model));
tabbedPane.addTab("Data", createData(model));
add( tabbedPane );
private JComponent createAlternating(DefaultTableModel model)
JTable table = new JTable( model )
public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
Component c = super.prepareRenderer(renderer, row, column);
// Alternate row color
if (!isRowSelected(row))
c.setBackground(row % 2 == 0 ? getBackground() : Color.LIGHT_GRAY);
return c;
table.setPreferredScrollableViewportSize(table.getPreferredSize());
table.changeSelection(0, 0, false, false);
return new JScrollPane( table );
private JComponent createBorder(DefaultTableModel model)
JTable table = new JTable( model )
private Border outside = new MatteBorder(1, 0, 1, 0, Color.RED);
private Border inside = new EmptyBorder(0, 1, 0, 1);
private Border highlight = new CompoundBorder(outside, inside);
public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
Component c = super.prepareRenderer(renderer, row, column);
JComponent jc = (JComponent)c;
// Add a border to the selected row
if (isRowSelected(row))
jc.setBorder( highlight );
return c;
table.setPreferredScrollableViewportSize(table.getPreferredSize());
table.changeSelection(0, 0, false, false);
return new JScrollPane( table );
public JComponent createData(DefaultTableModel model)
table = new JTable( model )
public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
Component c = super.prepareRenderer(renderer, row, column);
// Color row based on a cell value
if (!isRowSelected(row))
c.setBackground(getBackground());
String type = (String)getModel().getValueAt(row, 0);
if ("Buy".equals(type)) {
table.setRowHeight(row, 30);
c.setBackground(Color.GREEN);
if ("Sell".equals(type)) c.setBackground(Color.YELLOW);
return c;
table.setPreferredScrollableViewportSize(table.getPreferredSize());
table.changeSelection(0, 0, false, false);
return new JScrollPane( table );
public static void main(String[] args)
SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
public static void createAndShowGUI()
JFrame.setDefaultLookAndFeelDecorated(true);
JFrame frame = new JFrame("Table Row Rendering");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add( new TableRowRenderingTip() );
frame.pack();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
}Edited by: scavok on Apr 26, 2010 6:43 PM -
How do I change the background color of a row in a table indicator?
Hello,
How do I change the background color of a row in a table indicator? I know how to change the background color in a active cell, but that is not what I want. My first intent is to make the background color of the first row a unique color, such as green, just to highlight the top row of the table.
Regards,
Kaspar
Regards,
KasparI have done this before by using a for loop to change the active cell of a row in order to give the appearance that the whole row is turning the color at once.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved. -
How to change background color of row of a table in a panel table
hi! im trouble right now, somebody help me. i have a matrix of row and column, panel row and panel table in jsp. my problem is how can i change the background color of a row once it clicked. i have row in table which have panel table with panel column and panel row.
i have already work for it but i only change the background color once i clicked is the first row and first column then the rest row and column is not working..pls.. give me sample code for it..thnx a lot!!!
Thnank's,
froiletOk! I have 2 jsp, the input jsp and display.jsp! Once i input value on input.jsp, it will display on display.jsp. I have also my javascript named updateBin.js. Now, how can i update each row once i clicked it... the succeeding rows and columns..hope u help me with this..here is my code:
Display.jsp
<html:html locale="true">
<head>
<html:base/><meta http-equiv="content-type" content="text/html; charset=utf-8" />
<title>Strip Map Loader</title><script type="text/javascript" src="js/updateBin.js"></script>
</head>
<%
int intRow = Integer.parseInt(request.getParameter("intRows"));
int intColumn = Integer.parseInt(request.getParameter("intColumns"));
int intPanelRow = Integer.parseInt(request.getParameter("intPanelRows"));
int intPanelColumn = Integer.parseInt(request.getParameter("intPanelColumns"));
%>
<BODY bgcolor="#33b9ec" leftmargin="50%">
<b>Strip ID: </b><font color="red" face="arial"><b><bean:write name="strStripID" scope="request" /></b></font>
<br><br>
<font size="3" face="tahoma"><b>Bins Updater Tool:</b></font>
<table border="1" width="365px" bgcolor="#1ea6f7" height="15">
<tr>
<td valign="top" align="center">
<table><tr><td><font size="2">Select Bin Type:</font></td>
<td><select id="binType" onchange="updateBin()" size="1">
<OPTION></OPTION>
<OPTION value="green">Good Bin</OPTION>
<OPTION value="red">Reject Bin</OPTION>
</select></td></tr></table>
</td>
</tr>
</table>
<table id="tbl" align="center" border="1" cellspacing="3" cellpadding="5" bgcolor="#CC9900">
<tr>
<td>
<%for (int pnlrows=1; pnlrows<=intPanelRow; pnlrows++){%>
<table id="table" width="100%" border="1" bgcolor="#CC9900" cellspacing="7" cellpadding="0" align="center">
<tr>
<%for(int pnlcols=0; pnlcols<intPanelColumn;pnlcols++){%>
<td>
<%for (int rows=1;rows<=intRow; rows++){%>
<table cellspacing="5" width="100px" align="center" bgcolor="#CC9900">
<tr>
<td>
<%for(int cols=1; cols<intColumn; cols++){%>
</td>
<td id="col" bgcolor="#008000" align="center" ondblclick="changeCol()"> X </td>
<%}%>
<td id="row" bgcolor="#008000" align="center" ondblclick="changeRow()"> X </td>
<td></td>
<%}%>
</tr>
</table>
<%}%>
</td>
</tr>
</table>
<%}%>
</td>
</tr>
</table>
and this is my javascript code:
function updateBin()
var binType=document.getElementById("binType")
if(binType.value == "green")
[binType.selectedIndex].value
//binType = changeR();
//alert('Good Bin Selected');
if(binType.value == "red")
[binType.selectedIndex].value
//binType = changeC();
//alert('Reject Bin Selected');
if(binType.value == "")
alert('Please select only on the category!')
function changeRow()
if(binType.value=="green")
x=document.getElementById('row').style.background="green";
alert('Updated!')
if(binType.value=="red")
x=document.getElementById('row').style.background="red";
//alert('Reject Bin Updated!')
function changeCol()
if(binType.value=="green")
x=document.getElementById('col').style.background="green";
alert('Updated!')
if(binType.value=="red")
x=document.getElementById('col').style.background="red";
//alert('Reject Bin Updated!')
this code only updates the first row and column..but the succeeding panel row and panel column can't update...what will i do? theres something wrong in my javascript or in my jsp...pls help me......thanx.....in advance!! -
Change the background color of selected row in adf table
Hi,
Can somebody guide me in changing the background color of a row when its being selected. In my ADF table, one of the column is of type Command Link. So whenever i click this command link on any particular row that complete row color should change as an indication of that row being selected.
Please guide me to do this. I referred to other forum posts, but they couldnt meet my need.
Thanks
riHi Frank,
you're right. This should work. But the result is not perfect from my point of view.
I use
<af:table ...>
<af:column ...>
<af:outputText value="#{row.col1}" inlineStyle="#{row.mystyle}"/>
</af:column>
</af:table>and I get e.g. this in HTML:
<table ...>
<tr>
<td class="af_column_cell-text OraTableBorder1111"><span style="font-weight:bold;">qqq</span></td>
</tr>
</table>while I would prefer to get somethig like this:
<table ...>
<tr>
<td style="font-weight:bold;"><span>qqq</span></td>
</tr>
</table>, which looks much smarter. Is it possible?
Thanks,
Alexandre. -
How do you change the background color of certain rows in a Datagrid?
How do you change the background color of certain rows in a
Datagrid?Hee is a great example:
http://www.cflex.net/showfiledetails.cfm?ChannelID=1&Object=File&objectID=487
Tracy -
Getting the background color from a row
I'm displaying a table that has alternating row colors for odd and even... when I click on a row I am changing the color to blue. When I click on a different row I want to set the background color back to what it was for the originally selected row and change the currently selected row to blue. This worked just fine when I had the colors hard coded into the code... but as soon as I started using style sheets it stoped working,
My questions is how do I get the background color from a row... for instance, the following alert dislays nothing. How can I get the actual color out for the row?
var tableElem = document.getElementById('table');
var rowElem;
rowElem = tableElem.rows[0];
alert(rowElem.bgColor);
If you're working with style sheets, then ignore the background color. You don't want to care what color is actully being used, only that the correct style is in place.
Worry instead about the className property for your row:<style>
.highlightRow {
color: white;
background-color: gray;
.normalRow {
color: black;
background-color: white;
</style>
var tableElem = document.getElementById("table");
var rowElem = tableElem.rows[0];
alert(rowElem.className);
<table id="table">
<tr class="normalRow"><td>...</td></tr>
<tr class="highlightRow"><td>...</td></tr>
</table> -
How to set text and background color of current row in a adf table?
Hi,
In jdev 11.1.2.3,
How to set text fond and background color of current row in a adf table?
I tried to set Background color in table property, but that is not what i want.
Thanks.Hi,
We almost had the same requirement, but we just needed to color a specific column.
Here goes the solution to that, you might do the same for your row highlighting
Changes are required in jsff and one method to be added in backing bean
1. JSFF :
<af:column headerText="Amount"
id="c4" width="100"
inlineStyle="#{backingBeanScope.BackingBean.cellColor}">2. Backing Bean
//searchResultTableVO is Table's VO
public String getCellColor() {
FacesContext ctx = FacesContext.getCurrentInstance();
ExpressionFactory ef = ctx.getApplication().getExpressionFactory();
ValueExpression ve = ef.createValueExpression(ctx.getELContext(), "#{row}", FacesCtrlHierNodeBinding.class);
FacesCtrlHierNodeBinding node = (FacesCtrlHierNodeBinding)ve.getValue(ctx.getELContext());
Row row = node.getRow();
if(row.equals(searchResultTableVO.getCurrentRow())){
//You can add your inline style for font-style too
return "background-color:Red;";
return null;
}Hope this is helpful :)
Regards,
Neha.. -
Can you change the color of a row in a SUD
Is it possible to change the color in a selected row in a SUD? I have multiple tables in my SUD were the user can select multiple rows from each table. The problem is that when the user selects rows in another table the last one selected in the previous table is not hi-lighted. I thought that if I change the color of the row when selected the user can see all the selections once he/she goes to another table.
Thanks,
AJLHi AJL,
There is no way to color rows of the table control in a SUDialog. You could consider using the ActiveX container control and using the Microsoft ActiveX table control, which might have that functionality. Note though, that then you need to either ensure that control is always on all your client machines or make provisions for it to be installed/registered.
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
How to change background color in AutoComplete window ?
Is it possible to change background color in AutoComplete window ?
Bob, A.Ankit, you're both chasing a ghost here.
The screenshot shows an autocomplete enabled textbox with its dropdown list of autocomplete values to choose from. There is no property defining its backcolor. Not in the textbox nor in any class, neither any other baseclass nor _combobox of _base.vcx
The only way to chnage that color is not recommended, via changing windows theme colors. That would effect any window and control.
If you need another color even turning off themes won't help as VFP doesn't offer any property controlling that color, so you really would need to implement the autocomplete feature yourself, if you want the specify this backcolor.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de -
How to change background color in online editor
How to change background color in online editor
Jeff,
if you try to change all the plsql keywords to the same background color (that is not either white or black or blue) via the options panel in SQL Developer (Code Editor > PLSQL syntax colors), you will get the new background color in the worksheet only for the areas with plsql text, while the areas without any text will have the same background color as the base color scheme you started with. This means that there is no way to change the "general background" color via the options panel, but you have to use the same background color of one of the predefined color schemes.
This seems to me a bug, but probably it's not considered high priority, so it will not be fixed for the time being.
I would like to stress the fact that being able to change the color scheme of the development environment that you use every day about 8 hours a day can make quite a difference on your eyes at the end of the day.
Thanks,
Paolo -
How to change background color in photoshop cs3
how to change background color in photoshop cs3
Please help me...Background for what? You need to explain better and be more specific.
Mylenium -
How to change background color of multilevel textbox in oracle form 6i
hi
How To Change background Color of the Text.
In One Multilevel Block 10 Record is Display At a Time in a Text Box (Name is AMTt)
This Text Box display , Buffer and Record Length is 10
In Case Of Amount is Less 500 then Text Color Is Red(Or Any) and In Case Amount Is More 500 Then Color is Green (Or Any).
Me Use This Code in PRE_RECORD EVENT
TCMTL is Block name
TCMTL_AMT is Text Box Name
if :TCMTL.TCMTL_AMT >5000 then
g_fun.msgbox('Values is more');
Set_Item_Property('TCMTL_AMT' , BACKGROUND_COLOR, 'r50g100b100');
else
g_fun.msgbox('Values is Less');
Set_Item_Property('TCMTL_AMT' , BACKGROUND_COLOR, 'r50g100b10');
end if;
but This Code Is Refer Only 10th Value and change color depend on value.
so
possible to Different color in One Block Text Box Then how?DECLARE
cur_itm VARCHAR2(80);
cur_block VARCHAR2(80) := Name_in('system.trigger_block') ;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||'.'||cur_itm;
--:global.VISUAL_ATTRIBUTE:= 'BACKGROUND_COLOR';
--:global.VISUAL_ATTRIBUTE:= get_item_property(cur_block||'.'||cur_itm ,Background_Color);
IF :TCMTL.TCMTL_AMT >= 500 THEN
Set_Item_Instance_Property( cur_itm, CURRENT_RECORD, VISUAL_ATTRIBUTE,'r50g100b100');
ELSE
Set_Item_Instance_Property( cur_itm, CURRENT_RECORD, VISUAL_ATTRIBUTE,'r5g100b10');
END IF;
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
next_record;
END;
this is my in that how to set a VISUAL_ATTRIBUTE, and where to set so get a background color of text and change -
How to change a color for a row in ALV grid display
Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plzHello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks! -
How to change the color of specific row in ALV tree
Hi,
I m using method set_table_for_first_display of a class CL_GUI_ALV_TREE.
The req is to change the color of specific row. Now can anybody tell me how to change the color of ALV tree. As in ALV tree and in this method 'set_table_for_first_display', there is no parameter IS_Layout.
Pls suggest...hi
hope this code will help you.
Reward if help.
REPORT zsharad_test1.
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
*Populate field with color attributes
LOOP AT it_ekko INTO wa_ekko.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
IF ld_color = 8.
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM. " DATA_RETRIEVAL
Maybe you are looking for
-
This really confuses me
-
Cannot debug from Eclipse (Mac OS 10.7, Drive 3.01)
I piggy-backed this on another discussion three days ago, but perhaps creating a new thread will get more attention. I recently downloaded the Adobe Drive 3 SDK and am having problems debugging the sample connectors from Eclipse. I've followed all o
-
How to find the Infoobject name by Datasource .
Hi SAP Gurus Can any of you guys suggest how to find the list of Info objects for the Datasources . I have a scenario where I have a list of Datasources (400) which are Text and Attr Datasources, for which I need find the list Info objects, so can yo
-
Hello I made a Global Variable XX_DATE in Transaction Form Personalization with a value =:TACC_ACC_ASSGN.GL_POSTED_DATE. I'm planning to get the value from XX_DATE to one of the fields in Receipts thru Receipt Personalization. But a got the following
-
Syntax error, insert ";" to complete LocalVariableDeclarationStatement
I'm fairly new at JSP, and am trying to convert an ASP site to JSP. On most of my pages I get an error: An error occurred at line: 1 in the jsp file: /sheep.jsp Generated servlet error: Syntax error, insert ";" to complete LocalVariableDeclarationSta