Change language of time/date browse button

Hi. How I can change the language of time/date browse button. For example,
i want to change the caption of button "Set time to Now", to the "Time"? Is it possible?
Thanx.
Solved!
Go to Solution.

The dialog is a VI that is part of the LabVIEW package.
You can make a copy of this VI and edit the button text as you want.
look for picktime.vi in your \resource\dialog\ subdirectory of your LabVIEW installation.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Similar Messages

  • Detect if time/date browse button was used

    Hi,
    I have a position control vi for indexing elements inside array and displaying corresponding time and date. I have large number of control signals inside my block, but I have removed all irrelevant blocks and signal for this discussion. I have replaced all unnecessary controls with constant values, so don't waste time analyzing it.   
    If you take a look at my vi, you will see Star/Stop control, Position control and a time stamp indicator (Waveform time) with a time/date browse button from another time stamp control. I have all desired functionalities, but I have problem when using browse button for setting up time. I can't set my time two times in a row at same value because I'm comparing "Last entered time stamp" value with current one just entered. I would not like to completely change my blocks because I'm using a lot of property nodes and variables inside my project. I'm just looking for a way to figure out if time/date browse button has been pressed so I could jump to desired point in my recorded waveform.   
    Solved!
    Go to Solution.
    Attachments:
    position_control_lite.vi ‏16 KB

    I can't change Waveform Time Indicator to a Control because that would make other controls much complex (not shown in attached vi)
    I have modified my block to the simplest form. I have changed some control names.
    There is now only one problem - how can I detect if user has pressed time/date browse button? I'm not interested at this point which value has been entered.
    I need to replace User has entered value in  Jump to time/date with some kind of Boolean logic or event case.
    Message Edited by _thomas on 11-17-2009 09:23 AM
    Attachments:
    position_control_lite_lv8.6.vi ‏14 KB
    position_control_lite_lv8.0.vi ‏19 KB
    position_control.png ‏33 KB

  • How can I open the 'time date browse button'?

    Hello!
    How can I open the 'time date browse dialog' from the time stamp control in my block diagram? I tryed it with the property node but couldn't find this item to open the 'time/date browse dialog'!
    Thanks in advance for your help

    There is no way to programitically bring up the dialog window for the timestamp control. I recommend building your own dialog window VI that will work by opening when you want the user to set the time and when it closes, it can programatically update the timestamp control. It will not be as pretty but it will be just as functional.

  • Root Loop, Time/Date Browse and DAQmx Watchdog

    I've just run into the issue where the time/date browse calendar control blocks execution of my system.  See here for discussion about this problem.
    I've got a data aquisition loop running that uses the DAQmx watchdog, and opening that browse window is causing my watchdog to starve, thus causing my application to shut down.  Curiously, when I open drop down menus, as Jack illustrates in the aforementioned thread, I do not see the same behavior.  It's not really clear to me what is causing it to block, but the dropdowns don't.
    I'm wondering if anyone has any further explanations, or suggestions for workarounds. 
    Tim Elsey
    LabVIEW 2010, 2012
    Certified LabVIEW Architect
    Solved!
    Go to Solution.

    One solution I did in the past to solve this was to create my own Data/Time dialog in LabVIEW and hide the native button and add a normal button to the front panel which invoked this dialog. Since that makes the dialog a normal VI the root loop problem is not present with that. There is a VI in resource/dialog/picktime.vi that looks like the dialog used in the date/time picker but it isn't since making changes to this VI won't appear in the native dialog. LabVIEW seems to use an internal C implemented dialog which is the root cause of the root loop being blocked since the dialog message handler is running in the same thread as the root loop.
    Creating a copy of this VI in your own project and adding it through your own custom time browse button should solve the problem.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • ZDATE_LARGE_TIME_DIFF - How to change HANA DB time / date / timezone?

    Hi,
    I've installed BW on Hana, and i'm facing an issue when starting the system. I get ZDATE_LARGE_TIME_DIFF dumps which prevent me to do anything on the system (and the installation cannot finish). I've checked the error message and the time difference is 10 hours between the DB and the Application server. I've checked both Windows and Linux time settings, and synchronised them to the same server, and, from the OS, I can see the same time, but from Hana Studio, I see the wrong time. The difference of 10 hours is the difference between my time zone (Australia) to UTC.
    Does anyone faced this same issue? Or does anyone knows where can I set the timezone on the DB?
    In the meantime, I've managed to finish the installation by changing the time of the BW app server (windows) to be UTC.
    Thanks in advance.
    Cheers,
    Diego

    Hi,
    if you want to change time or time zone (parameter TZ in profile) on SAP HANA server you have to go to folder (as <sid>adm):
    /usr/sap/<SID>/home
    Next -> you need to backup file:
    cp -p .sapenv.csh .sapenv.csh_<date>
    Attention - before this you need to stop database!
    In next step edit this file and delete the line with time zone:
    setenv TZ UTC
    Next logout and login as <sid>adm and check current time:
    date
    Now you can start your database again.
    Best regards,
    Pawel

  • Changing language for time on log-in

    This is a continuation of a question answered earlier today.  In that question, I noted that I had bought an "open box" special from Best Buy. When I started it up, I noticed that the Login screen was in Chinese. Thanks to the group for suggesting a fix. This worked for the most part. One small glitch -- on the login screen, the area where the time is -- this is still in Chinese.  What can I do to change this?
    Any help appreciated.
    System specificaitons
    Macbook pro 13 inch
    Mid June 2012
    8 GB RAM
    750 GB hard disk
    10.8.1 Mountain Lion
    Thanks in advance.

    This is a continuation of a question answered earlier today.  In that question, I noted that I had bought an "open box" special from Best Buy. When I started it up, I noticed that the Login screen was in Chinese. Thanks to the group for suggesting a fix. This worked for the most part. One small glitch -- on the login screen, the area where the time is -- this is still in Chinese.  What can I do to change this?
    Any help appreciated.
    System specificaitons
    Macbook pro 13 inch
    Mid June 2012
    8 GB RAM
    750 GB hard disk
    10.8.1 Mountain Lion
    Thanks in advance.

  • HT2490 Keyboard preferences changes language every time I start my computer

    Hello
    I've been having so many problems since I updated my computer to Maveriks. One of them and probably the most annoying one is the keyboard preferences.
    I bought my computer in Mexico and the keyboard has always been setup in Spanish ISO since I remember. Since the update Every time I start my computer my keyboard settings are set in English. So I went to the panel and add Spanish and deleted English form it and it works. The problem is that I have to do this everyday, which is completetly stupid because it used to work before.
    Thank you so much
    Hope you can help with this little but annoying problem

    You have a corrupted com.apple.desktop.plist preference file.
    Deleting the System Preference or other .plist file
    If your still lhaving issues, then see #12 and #13 here
    Step by Step to fix your Mac

  • File path control - browse button colour/color

    I can't change the colour of the browse button on a file path control. I'm using LV 8.5, but I think I have the same problem on 7.1
    Is the only way to change the colour to customise the control? Every other part of it seems to take colours from the tools palette.
    Thanks for any pearls of wisdom.
    Jon.

    I am able to change the path browse button color in 8.51 are you trying to change the button color or the color of the folder on the button.  To change the buttoin color use the paint tool and make sure you hit the space bar so you are painting the left color (Background color I cant remember which is which).  This probably doesnt work on system buttons.
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Change language in WEB CRM UI

    Hi All,
    is there a way to change language in UI (web browser level) of WEB Crm? (even thorugh an SDK)?
    Best Regards,
    Vangelis Kanellopoulos
    Edited by: Vangelis Kanellopoulos on Oct 5, 2009 12:55 PM

    Yes you can. Just select the section that you are trying to change from the Namespace drop down and click the finder. This should give you a list of all of the different strings and their correpsonding translation. You can then change the translation and save your changes.

  • Data Browse Event

    Hi, I want to react when the user clicks on the data browse buttons in the menu.
    how can i do that?

    Hi Philipp
    You will have to catch these events in the The SBO MenuEvent Handler..
    Use the following code:
    if pval.menuUid="1288" 'Next Record Click
    if pval.menuUid="1289" ' Previous Record Click
    if pval.menuUid="1290" 'First Record Click
    if pval.menuUid="1291" 'Last Record Click
    For Add,Find etc you should go thru the help to find the MenuUid for the other buttons.. But for databrowser these are the MenuUid's
    Hope this helps..
    Regards
    Aris

  • Htmlb:fileUpload: change "browse" button to another language

    I have a simple fileUpload Tag that shows a inputField and a "Browse" Button. In my Browser-Settings, the language is German, so instead of "Browse", there should be something in German.
    Can I change that word somehow?

    Hi Daniel,
    A very good hack has been found out for the same. Look at this weblog...
    /people/dagfinn.parnas/blog/2004/08/15/inputfile-how-to-hide-the-plain-browse-button
    I am sure you can find a way out from this and please let us know, your approach as well
    Regards,
    Subramanian V.

  • SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

    Hi,
    I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
    "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
    I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
    Thanks in advance.
    Poomani Sankaran

    Hi Poomani,
    Thanks for posting your issue,
    you must have to Install SQL Server 2012 ADOMD.Net  on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
    http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Time Date change

    I have tried to change the time & date on my 6500a officejet printer...
    I have used the EWS web page..when I do attempt to change either
    date or time I get an error...
    What Am I missing
    Thanks in advance

    Dear Customer,
    Please follow these steps to set the date and time from the control panel.
    1. Press Setup .
    2. Use the right arrow button ( ) to highlight Tools , and then press the OK button.
    3. Select Date and Time from the Tools menu and then press the OK button.
    4. Enter the month, day, and year by pressing the appropriate numbers on the keypad.
    After the date is entered, the Enter Time screen displays.
    5. Enter the hours and minutes by pressing the appropriate numbers on the keypad.
    After the time is entered, the Tools menu displays.
    6. Press the Back button to return to the main menu.
    Please revert for any clarification
    Regards,
    K N R K

  • Has the home screen time/date size changed with a recent update?

    my time/date suddenly looks huge to me. Kind of jarring I think.
    I'm not sure if it's changed somehow, or if I've just never noticed before.
    Does this look like the standard size? Is there any way it may have changed??
    thanks
    J

    Everything seems large to me. Try an iPhone reset:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
    Before you do that, look here: Settings>General>Accessibility...is zoom on?

  • Can I change Capture time/date globally

    I have shots from a trip done with two different cameras, however the time stamps are different by one day and one hour.  I would like to globally change the creation date and time on one of the cameras in the Metadata, or perhaps change one and sync with the others.  I don't see how this is possible, but maybe there is another program that can do this.
    thanks,  kb

    The Metadata > Edit Capture Time command can adjust a set of photos by the same amount of time:
    1. Use the Library Filter bar to search for all the photos taken with just one of the cameras, by filtering in the Metadata browser for Camera or Camera Serial Number.
    2. Make sure you're sorting photos by Capture Time (down in the tool bar, View > Tool Bar).  Select all the photos from the trip.
    3. Do MetaData > Edit Capture Time.
    4. Select Adjust To A Specified Date And Time.
    5. The Original Time field will show the capture time of the most-selected photo.  Change the Corrected Time by one day and one hour.
    6. Click Change All -- this will change all of the selected photos by one day and one hour.

Maybe you are looking for

  • Question about multiple class files

    I just started learning JAVA a couple of days ago and the first program I wrote had two classes in one file. here is the program : class fib_num { public int value; public boolean is_even; class Fibonacci { /** Print the Fibonacci sequence for values

  • SQL Azure with Azure Virtual Machine inside Virtual Network - How to connect

    Hi Team, I have one typical scenario where there is one Windows Application I wan to run from my Windows Azure Virtual Machine which is inside Azure Virtual Network (which has its DNS and ADFS and etc..) Because its Virtual Network, We can't access i

  • How do I make a backup copy of a disc burned by iDVD . . .?

    . . . after iDVD wiped out the archive file of the project. After burning the first disc, I went back in to iDVD to make a change using the DVD map feature, then I clicked save.  Crash!  When I reopened iDVD there was now a blank screen for the proje

  • CatalogData folder too big on passive server in DAG

    I have a two Exchange 2010 server DAG.  One is active and the other is mounted but passive. On at least two of the replicated and mounted databases on the passive server, the CatalogData folder is too big. I noticed inside of them, they have old .ci

  • Iphone will not let me select "don't use icloud"

    I downloaded 5.0.1 software to my iphone and am going through the set-up menu. Under "set up icloud" it will not let me progress with set up if I select "don't use icloud". I don't want to use icloud but the "next" button will not function unless I s