Change LO Cockpit Initialization Selection Criteria

We would like to use the 2LIS_12_VCITM DataSource at our organization to report on delivery information. I am encountering a problem because I would only like to Initialize data pertaining to specific shipping points.
The statistical setup does not contain shipping point or any other field I can use to exclude the data I do not want. If I am forced to do the setup for all data and filter in the update rules my volume & runtime will be unnecessarily large.
Is there any way to add additional fields to the selection screen ( OLI8BW ) ?
Thank you!

Unfortunately none of the delivered selection criteria for the Statistical Setup will eliminate the documents we don't want to include.
The delivered options are:
Archiving Session (N/A)
Sales Org (Doesn't Differentiate as needed)
Company Code (Doesn't Differentiate as needed)
Sales Doc # (No specific range that matches requirements)
Any other suggestions that would allow me to add another field to the selection options?

Similar Messages

Description change in query report selection criteria

I created a query report with certain criteria but in that i suppose to change the description .
for example
Posting date greater than
Posting date lesser than
but i need this selection criteria
as
Posting date from
Posting date to
regards
kavitha

Hi Kavitha,
Unfortunately, it is not possible to change the system field description.
Refer to this thread
Re: Parameter Display Name Reg.
Regards,
Vijay Kumar
SAP Business One Forums Team

Can we change parameter descriptions in Selection Criteria. YES we can!

Dear All,
I have been struggling some time on some way to change the parameter descriptions in the Query - Selection Criteria screen.
While doing numerous tests on trial-and-error, I accidentally hit upon a solution which appears to work!
To change a parameter description, we simply have to reverse the order in which the WHERE clause is written.
Please refer to the Query below:
I used Customization Tools to create a UDT called @SCANNING
and a UDF called U_ourref
          Title   : ourref
          Description : Our Reference
If I use WHERE clause the conventional way, ie
WHERE
T1.[ImportLog] = @ourref
I get the following Selection Criteria screen:
Query - Selection Criteria Screen
Import Log         .........................
[OK]   [Cancel]
If I write WHERE clause by interchanging the 2 sides of the equality, i.e
WHERE
@ourref = T1.[ImportLog]
I get this screen:
Query - Selection Criteria Screen
Our Reference         .........................
[OK]   [Cancel]
Well! Is this not a way of changing the parameter description?
And it works!
My Problem
The solution is nice. However, I wanted to use LIKE instead of EQUAL TO
in order to allow Query to search for similar items.
With the conventional clause, I can use '%[%1]%' in declaration and LIKE in the WHERE clause.
With the reverse clause, I cannot figure out how to do it.
Could anybody help?
Thanks
Leon Lai
declare @ourref nvarchar (30)
set @ourref =
/*select T2.U_ourref FROM [dbo].[@SCANNING] T2 where T2.U_ourref*/ '[%1]'
SELECT
T0.[TaxDate] AS 'Doc Dt',
T0.[DocNum] AS 'SAP Ref.',
T0.[CardName] AS 'Supplier Name',
T0.[DocTotal] AS 'Amount',
T1.[ImportLog] AS 'Our Ref',
T1.[BlockNum] AS 'Reqn No.'
FROM [dbo].[OPCH] T0
INNER JOIN [dbo].[PCH1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN [dbo].[OJDT] T2 ON T0.[TransID] = T2.[TransID]
WHERE
@ourref = T1.[ImportLog]

Dear István Korös ,
My main concern was modifying the Parameter Description in the Selection Criteria Screen.
I certainly tried your suggestion, and it works, but unless I modified the WHERE Clause
from :
T1.[ImportLog].@ourref
to:
@ourref = T1.[ImportLog]
the Selection Criteria screen shows:
Query - Selection Criteria Screen
Import Log         .........................
[OK]   [Cancel]
It is only after I have 'primed' the system by using:
WHERE
@ourref = T1.[ImportLog]
that the Parameter Description changes to:
Query - Selection Criteria Screen
Our Reference         .........................
[OK]   [Cancel]
I can then use your line:
WHERE T1.[ImportLog] like '%'@ourref'%'
without any problem. The amended Parameter Description remains!
I noticed something strange:
Once I have 'primed' the system, it always shows the amended description on the Selection screen!
Before priming, it always showed the system description.
Don't know why?
Anyway, I found a trick to 'prime' the system in all my queries to make sure the amended name appears
on the Selection screen. I write:
WHERE
(@ourref    = T1.[ImportLog] OR
T1.[ImportLog] like '%'@ourref'%')
The first line is just for priming to ensure the Parameter Name will be changed.
The 2nd line is the correct code to use.
With this trick, we can change the Parameter Descriptions to whatever name we want.
The only problem is that you lose the function List of available values.
Thanks a lot,
Leon Lai

BEx Selection Criteria need to be change

Hi friends,
I need to change the Bex Query Selection Criteria from Date to Year.
Kindly Help me out on this Issue.
Thanks in Advance
Priyanka

Hi,
Let the variable for 0CALDAY be ZVARDAY of Processing type Customer Exit Interval
Let the variable for 0CALYEAR be ZVARYER of User Entry single value
Add the 0CALYEAR to the Filter and attach the variable ZVARYER
Go to Cmod transaction and add the code to the variable exit
check the code with an Abap Consultant.
WHEN 'ZVARDAY'.
    IF i_step = 2.
      READ TABLE i_t_var_range INTO zrange
        WITH KEY vnam = 'ZVARYER'.
      lyear = zrange-low+0(4).
        CONCATENATE lyear '0101' INTO l_s_range-low.
        CONCATENATE lyear '1231' INTO l_s_range-high.
      APPEND l_s_range TO e_t_range.
regards
Happy Tony

Report Painter - Change multiple selection criteria

Hi Experts,
I am new to report painter. I need to change a report which is being developed in Report Painter. I need to add extra selection criteria.
Please help.
Regards,
Nitin.

Please search for available information before posting, do not post basic questions.
Thread locked.
Thomas

Changing invisible selection criteria for a variant...

Hi,
There is a invisible selection criteria when I goto a custom Z variant of program RFBIBL00. How can I change the variant value in invisible selection criteria ?
Regards,
Rajesh

Hi,
Using the ABAP workbench (SE38) use the menu option Goto -Variants
choose the custom variant
Choose the attributes subobject
and click on the change button.
then deselect the hide from the required variable.
Regards
David Cooper

BADI Impl. VB_BD_SELECTION to change selection criteria in batch det.

Hye,
I need to use the BADI VB_BD_SELECTION in order to change the selection criteria to be used during batch determination
For this purpose method RESTRICT_CONF_CHARS has been implemented.
But I didn't find any documentation explaining how to manage this one:
as result the characteristic record is deleted from the selection criteria instead of updating it with a new value specified in the structure CT_CONFIG-ATWRT.
For example:
in the strategy we have the value car1 = A.
If BADI is off than the system in production order uses right this criteria to determine the batches.
If BADI is on than we want to define new criteria to find batches with the characteristic car1 = B but the system deletes car1 from selection criteria.
Thanks
Anna

Hi Anna,
I have the same problem for another customer project.
The big problem is I didn't found any documentation or an class example for that BAdI.
Please help us.
Thank you

Change selection criteria or check allowance for marking

Hi,
I have executed the costing in CK11N and saved the result. The costing run was successful without any error.
When I want to Mark the cost in CK24, I am getting the below error. Kindly help to resolve this issue.
Change selection criteria or check allowance for marking
Message no. CKCC140
Diagnosis
No data was selected for marking.
Possible causes:
There is insufficient data in the selection screen to select the required cost estimates.
The organizational measure was not carried out, or it was issued with a different costing variant to that of the cost estimates ( Marking Allowance).
All the cost estimates contain errors.
The cost estimates have already been marked or released.
For detailed information, call up the log.
thanks and regards
Murugesan

Dear Murugesan,
First ensure in CK11N,you have saved the cost estimate without any error,the signal showing with green colour.
Then in CK24,first take a test run for marking and then without the check box for test run.
Before Executing this T Code for marking,click on marking allowance and ensure for the period,company code and the same
costing variant and costing version,it shows green colour which indicates alloed for marking and release,otherwise,just click on
your company code,enter the costing variant and costing version and save the datas.
This should be done only once during the period begining.
Once after doing this,ensure you have complete authorization for marking and release.
Check and revert back.
Regards
Mangalraj.S

How to change Selection Criteria for a Business Content Data Source

Hi Experts
I am extracting data using 0CO_OM_CCA_9 Datasource. I would like to be able to select a range of Company Code (BUKRS) to pull in, but I cannot find a way to make certain fields available as selection criteria. When I go into "Change DataSource", I can unselect fields, and even select certain fields, but the option for most is grayed out.
How can I make this field available as selection criteria in Infopackage?
Thanks for the help.

Its not that simple to enable a new selection for a Business Content Datasource, if its not already provided by SAP. Enabling new fields for selection should be accompanied by corresponding extractor code changes to process those field selections and use those selections throughout the extraction process.
Solution for your problem would be create a custom extractor with all the logic of standard extractor (function module BWOMD_GET_CTRCSTA1 for 0CO_OM_CCA_9) and extra logic to process the new fields for selection.
Hope it helps!

Change to Selection criteria in Datasource, do we need to re-init?

Hello all,
We are planning to change the selection criteria for a datasource, we want the year to be one of the selection criteria so we can load data only for particular years.
Now this datasource is in production for some time, so once we do this change will we have to re-init the extractor or the delta that is working will keep working fine?
Please let me know.
Thanks,

Hi Kiran
Its worth mentioning that if its a V3 datasource like logistics then you need to load the setup table with the required data before extraction.
Also ensure that the measures in your DSO are in overwrite mode unless the year that you are loading does not currently exists in the DSO. (ie. its a new year)
The Full Repair Request option is under the Scheduler menu on the infopackage.
Hope this helps. <removed by moderator>
If you need more help let me know.
Asif
Edited by: Siegfried Szameitat on Jun 15, 2009 5:17 PM

Changing Selection Criteria in Current DataSources

I am pulling in financial information from BSEG into BW. BSEG is a massive table with a lot more information than I care to pull in for my purposes. I would like to be able to select a range of GL Accounts to pull in, but I cannot find a way to make certain fields available as selection criteria. When I go into "Change DataSource", I can unselect fields, and even select certain fields, but the option for most is grayed out.
How can I make other fields available as selection criteria?
Thanks for the help.
Sean

Hi Sean,
this is pure brutal code....
SELECT SINGLE * FROM ROOSFIELD
WHERE OLTPSOURCE = ZBW_BSEG AND
OBJVERS = 'A' AND
FIELD = GREYFIELD.
IF SY-SUBRC = 0.
ROOSFIELD-SELECTION = 'X'.
MODIFY ROOSFIELD.
ENDIF.
Sean, test this solution to verify if the selection you done works effectivly...
Hope this helps.
Bye,
Roberto
(remember to click on the star as way to thank !!!)

Selection Criteria in Supply Chain Cockpit

Hello,
Is it possible to add some selection Criteria to add object in the work area ? For example I would like to add the ABC indicator as selection criteria to load in my work area only Product that have a class A indicator.
Thanks for your help.
Laurent.

Hello,
If you want to use the Alert Monitor within the Supply Chain Cockpit (SCC) in SAP APO, you must assign application-specific alert profiles to your SCC user profile. In the upper right area of the SCC, you can see the existing alerts for the applications.
Please look into the below link for more information:
http://help.sap.com/saphelp_scm70/helpdata/en/47/f925c8852f383ce10000000a42189b/content.htm
Regards

Query selection criteria - changing description field..?

Hi Experts,
i want to change description filed in user query selection criteria form..
i have 3 fileds :
docdate - this filed i want to chage 'Document First'
docdate - This filed i want to change 'Document Last'
name -
my problem: screenshot
[Click Here|http://img638.imageshack.us/img638/3466/userqueris.jpg]

The system always asks with the description of the field you refer to with the parameter variable in the select statement.
I sometimes defined a UDT only for getting the appropriate title in the parameter entering window. The table has no data; I used it only for its field names.
(The parameter request can be placed inside a comment and the entered value is used setting an SQL variable like this:
declare @d datetime
/*select t.createdate from ordr t where t.createdate=[%0]*/
set @d=[%0]
This SQL variable can be used later in the real query.)
(But then you loose the possibility to choose from the u2018List of existing valuesu2019

Selection Criteria needs to be change

Hi,
I have one Bex query ZHR_PONT_R_TOTALLUMPDISCOUNT.
i want to change the selection screen from the Date to Year.
Can anybody help me out in this issue. How to change.
Thanks
Priya

Hi,
Whappened while executing as per the previous thread:
Re: BEx Selection Criteria need to be change
Let me know the outcome.
Regards
Happy Tony

Changing standard selection criteria (MB51)

Hi all.
I have a requirement to add the 'Requisitioner' field in the selection criteria for MB51, program (RM07DOCS). I am on version ECC6
The requisitioner field is in the EKPO ( Purchasing Document Item) table: EKPO-AFNAM.
What I need to do is, add this field in the selection criteria and select all purchase orders and their relating material documents (MKPF MSEG) according to entry in this field. I know the logic which I have to implement.
I have checked out the SDN forums quite throughly and have come up with a couple of questions/solutions.
1) Copy the program into Z-name space and add in the code
Question: Where to specifically add the code, the program is huge with multiple enhancement points being seen in the code.
Can someone please guide me where I can change the displayed records, point where iI can append data or change the internal table being sent for ALV display.
2) Make changes in SPRO>Define field selection for material document list.
Question: The required field is not present within the listing, It does give the option to make new entries, but I have to specify a program/table and field.
If I create my own program to get the details and display onto an ALV Grid, will the program be called when I make selections on that requisitioner field?
3) This is text copied from a thread, I have lost the link to it.
Create a Z report that is a copy of the selection include of the standard selection screen include with the additional selection criteria.
- Export the extra selection criteria value to shared memory.
- Submit the standard VL10G program with the selection sets.
- In user exit (depends on which field needs to be checked), import the extra selection criteria value back in and filter the selected data set.
Could someone please guide me if it is possible to do the above within RM07DOCS, and a little more detail on how to go about it?.
Will reward points asap.
Thank you

have checked out the SDN forums quite throughly and have come up with a couple of questions/solutions.
1) Copy the program into Z-name space and add in the code
Question: Where to specifically add the code, the program is huge with multiple enhancement points being seen in the code.
Can someone please guide me where I can change the displayed records, point where iI can append data or change the internal table being sent for ALV display.
---> U have to find out , where /how they defined Selection screeen , final output they are displaying.
2) Make changes in SPRO>Define field selection for material document list.
Question: The required field is not present within the listing, It does give the option to make new entries, but I have to specify a program/table and field.
If I create my own program to get the details and display onto an ALV Grid, will the program be called when I make selections on that requisitioner field?
---> lot of work to do
3) This is text copied from a thread, I have lost the link to it.
Create a Z report that is a copy of the selection include of the standard selection screen include with the additional selection criteria.
- Export the extra selection criteria value to shared memory.
- Submit the standard VL10G program with the selection sets.
- In user exit (depends on which field needs to be checked), import the extra selection criteria value back in and filter the selected data set.
Could someone please guide me if it is possible to do the above within RM07DOCS, and a little more detail on how to go about it?.
Better Options --->try to get the logic of MB51 , then do changes which are required.
most of data , u will get it from MSEGMKPFMARA+MBEW.
revert back in case of any other issues.
Regards
Prabhu

Change LO Cockpit Initialization Selection Criteria

Similar Messages

Maybe you are looking for