Change source array in JComboBox

Is there a way to change the list of items in a combo box while the code is running? Thanks

The one time I don't preview my posting I make a typo. As I was trying to say:
Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/model.html]Using Models for information on Models. Like I said every Swing component uses a Model so take the time to read the tutorial and understand what a Model is. Its called Model-View-Controller (MVC) design.
Also, I checked the tutorial, it uses string arrays as wellTo quote the combo box tutorial:
No matter which constructor you use, a combo box uses a combo box model to contain and manage the items in its menu. When you initialize a combo box with an array or a vector, the combo box creates a default model object for you
Yes, you can create a JComboBox with an Array. The data from the array is copied to the Model.
I just can't figure out how to change it.You don't.
Thats why I just told you that you need to change the model. This can be done using the methods in the DefaultComboBoxModel. I gave you the convenience methods from the combo box that does this for you.

Similar Messages

  • "Master data attr. of" un change source of update rule.

    hi,
    What is the importance of following in "change source" (characteristics) in update rules.
    1. master data attr. of
    2.initial value
    3. Source chars
    4. constant
    When and why these are used.
    Thanks in advance.
    Regards,
    Avneet

    Hi Avneet,
    Lets say Material group is an attribute of 0MATERIAL. You cube contains Material and also Material Group as a separate characteristic (not as navigational attr) becasue you want to store the value of material group as it was during the time the transaction happened.
    But here you transactional data coming from the source brings Material values, not values of Material Group. So in the update rule for Material Group, you can specify "Master data attribute of" 0MATERIAL. What the system will do is take the value of 0MATERIAL on this record and populate Material Group taking the value that is present in Material Master data.
    So if Material = M100 and Material Group is MG01 in master data, it will supply MG01 to Material Group char in the cube.
    Hope this helps...

  • Issue in OWB mapping - when changing source and target database

    Hi,
    I need help for resolution of the issue I am facing when moving mapping from development environment to QA.
    Here is situation,
    We develop ETL using one source, one staging and one target database.
    In development we use one control_center for Source to staging and another control center staging to target.
    All works fine in development.
    Now I have created new runtime repository and imported all OWB projects (with full dependencies, exact replica of development). Now I need to change source and staging and target as different database.
    I have created new database location connections and defined/attached DB connectors with stage and target location.
    Now issues are
    1.     Two Staging mapping are not able to bound with source table (giving different error
    a.     One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
    b.     Other mapping show error for source table/object not bound to repository
    2.     All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
    Not sure how to proceed from here.
    I have recreated new repository and re-imported all project/mappings and defined all connection but still same issue.
    Thanks in advance,
    Vipin

    1. Two Staging mapping are not able to bound with source table (giving different error
    a. One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
    b. Other mapping show error for source table/object not bound to repository
    The above error were resolved when re-synchronized the table (for few I have to reimport the table) and mapping.
    2. All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
    The above error still pending. My target mapping are not able to deployed/compiled.
    For the above I have defined one Staging location to one target target location and target location have connector to staging (not sure if I have to define connector name same as staging location, as I have created DB connector with different name but reference database is same as staging location).
    Mapping are assoicated with desired data locatoin and meta data.
    control center is also have that data location.
    Mapping are configured for the desired location.

  • Does not allow to change source system in Variant

    Hi Gurus,
    I am creating a variant for the program RSIMPCUST, but it does not allow me to change source system name. It is showing me gray color. Do you how to fix this issue ?.
    Thanks
    Liza

    Hello Liza,
    Did you try my solution?
    [Re: Change source system name in variant in BWQ]
    There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
    It's best to go for that solution I already provided to you...
    Diogo.

  • Change source system name in variant in BWQ

    Hi Gurus,
    I created a process chain for global seetings for unit of measurement and fiscal year variants and transported to BWQ.
    In BWQ, I found the source system name in variant is showing ERD source system name, but I need to change it to ERQ source system name. Any advice how to change source system name in variant in BWQ I would appreciate it.
    Thanks
    Liza

    Hello Again Liza...
    I had the same problem but I didn't need to include in process chain...
    So to execute periodically you can change it in debug mode, not the best solution...
    But since you need to use it in a process chain, you should copy that program to one of yours Z.
    Do this:
    Go to transaction se38 and insert the program name "RSIMPCUST".
    Click on the button of "Copy" (Ctrl+F5).
    Change the source program name to ZRSIMPCUST (or whatever you want)
    Click Enter
    Click the button to mark everything (F8)
    Click Enter
    On the next window of the name of the include click enter (leave it blank)
    Click on the button Change of your Source Code
    In line number 54 you'll find this in Selection Screen part:
    PARAMETERS:  logsys  TYPE rsa_logsys MODIF ID p01.
    PARAMETERS: logsysnm LIKE tbdlst-stext MODIF ID p02.
    Delete those two lines and insert this ones:
    PARAMETERS:  logsys  TYPE rsa_logsys.
    PARAMETERS: logsysnm LIKE tbdlst-stext.
    Now click on Activate button (Ctrl+F3)
    Now you have a new program just like the old one but you can change the source system to whatever you want!
    Please assign points,
    Diogo.

  • Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?

    Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?
    It's a dean markley acoustic pick up with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.

    Watts100woo wrote:
    with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.
    you appear to already know the answer, however...
    GB is not recording it in stereo, nor could it
    the short story:
    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    the long story:
    http://www.bulletsandbones.com/GB/Tutorials.html#bsqstereovsmono
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Change Source system Tech.Name

    Production :   PRE -
    >  PRB
    PRE-Production    :   PPE -
    > PRE
    We make a copy of our production BI to Preproduction BI (PPB) we follow note # 886102. We want to connect this system to our pre production ERP (PPE).We already run BDLS change the logical system name we created new RFC created which is pointed to new R3 system .Problem is when we are going to run Tcode RSA1 in source system it shows old Tech name PRE600. We are unable to activate the source system.
    We can create new source system (PPE),but All our BI objects mapped with old source System (PRE600). I am afraid to change thousands of BI objects ( change source system from PRE600 to PPE600).
    Is there any work around we can change the Logical Source system Tech.Name? or some batch job which change the source system name for all BI objects.
    Appreciate your earliest reply.
    Nawab

    Hi
    Can you please check the Tcode BDLS
    Check the document it will be helpful
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
    Regards

  • Replacing the Header in rule file without changing source file(header defi)

    hi,
    i am loading the data using header in the Source file (.xls).
    I need to load the same file but for diff header (say instead of A1 i need A2) without any changes in source file.
    can someone please provide information that how to change the header in source file without opening/changing source file.
    Thanks in advance
    Anubhav Bisht

    HI SM,
    thanks for reply.
    the Problem is that there is two members in header defined in the source file that i need to change while loading the data.
    the load rule is picking header from the Source file, so replacing in the field is not working..
    do you have any other option/Suggestion.
    Regards
    Anubhav

  • Change source field in Employee Self Service - Personal Information

    Dear Expert,
    I want to change source field in ESS - Personal Information. Currently, value of field Full Name in Personal Data - Personal Information is taken from column CNAME in table PA0002. I want to change it so that value for field Full Name is not taken from that column.
    Please help if you have any information about how to do this.
    Thanks,
    Prescy

    HI Febrianti,
    To change this you have to change data binding of the field in the webdynpro java application.
    MOst of the Fields on screen are mapped to fields in HCMT(R structure) structures in backend.
    If new field , with which you want to bind full name is already present in the R-structure then you just have to change the binding else you have to do model changes .
    More clarification is needed about your doubt as to using which field you now want to use to read full name.
    Hope this helps !!
    Best Regards,
    Ruchi

  • Change Source of supply

    Hi Experts,
    We have done mandatory PR for PO in SU3 (EFB-01), we have ticked following things in OMET
    Display conditions, Enter conditions, W/o material and ref to purchase requisitions.
    Now when we want to change source of supply in PO or Purchase Requisitions, but fixed vendor field has been greyed out. What should we do.
    Please help me. Full points to helping answers.
    GR

    Hi
    In OME5 check whether your Plants needs mandatory source list requirement.
    In OMET you have a check box called 'Change Source'
    Regards
    Amuthan M

  • Change Source

    Hi All,
    I have to change source into my data warehouse.
    At the moment my data is coming from acemigration(source) and load the data into datawarehouse now i just need to change the souce called acedress(source).
    Acemigration and Acedress is the schema name. Both structures are the same
    I need to do this because the data quality is not good in ace migration.
    At which places do i need to make necessary changes.
    Thanks in advance
    kaushal

    another way is........
    Right Click the SourceModule
    Select "Open Editor"
    Select "Data Locations" tab
    Remove your existing source location from the "Selected Locations" panel
    Click "New" button
    Give the credentials of you new source location
    Click OK and you are done
    Go to the mappings in your Target Module and make sure that the source objects are still Bound to the correct tables of source
    Drop the objects of Target Modules (if you have already deployed)
    And then Deploy the objects of Target Module again
    I hope this will help
    Regards,
    Usman

  • Can we change source of fx:include tag from controller class?

    Is it possible to change source of <fx:include> tag from controller class? The requirement is to dynamically change certain section of a page.

    Thanks Daniel.
    Is it possible to load <fx:include> into Anchor Tag from controller class?
    Edited by: Ravi_Teja on Jun 15, 2012 3:45 AM

  • Change 1D array of 32 bit integer to 1D array of BV tag

    i just want to change 1D array of 32 bit data type to 1D array of BV tag to display this in Historical trend viewer
    an urgent reply wud b highly appreciable
    VINO

    What you are asking for is not really clear for me... I assume you want your array of numeric values to be replaced by a boolean array.
    Also, I was not sure about what numeric value has to correspond with TRUE or FALSE...
    Here is a possibility to do this :
    I hope this will help you...
    Message Edité par TiTou le 03-29-200609:07 AM
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Attachments:
    QH.png ‏6 KB

  • Source array to desination array

    i have a method that is meant to copy all numbers in the source array (src) to the destination array (dest). I have developed the following but unsure if it is right.
    TASK: copying all numbers in the source array (src) to the destination array (dest)
    private void copyToTemp(int[] dest, in[] src)
    int[] src = {1, 2, 3, 4 , 5};    
    int[] dst = new int[10]
    System.array(src, 2, dst, 0, 7);
    console.printf(new String(dst));
    }

    Cross Post

  • Changing source bin

    Hi,
    I want to change source bin once the transfer order is already created is it possible? and how? as far as I know it is not possible, but I want to know if some has done something similiar and how was it? And if you gave a RF solution
    Thx
    Edited by: Mariana  Hernandez on Jun 23, 2009 5:15 AM

    Hello,
    I do not think we can change the source bin but we can change the destination bin in case of RF solution.Also I guess it is possible to change the destination bin without RF solution. The destination bin can be changed by maintaining indicator in storage type master data for "Dst bin ch.during confirm".
    Regards,
    Prashant

Maybe you are looking for