Change the default movement in reversation during creating the PM ORDER

Hi experts,
I want to change movement type in reversation which automatically generated by creating the pm order. I know the configuration can realize the function but the configuration is for all the type of PM ORDER. I only want to change the reversation's MOVEMENT TYPE by specified the PM ORDER TYPE. How can i realize this function?
And I have tried some BADI or user exits , but those doesn't work.
Waiting for the solution ..... thank you in advance.

hi
In the standard system, movement types are preset which you must not change.
For the components, Plant Maintenance and Customer Service, the entry with the key 'IWO1' is relevant. In addition, you only need the two entries for the goods issue (GI) of materials for maintenance orders and the accompanying reverse operation (GI cancellation).
as of my knowledge we don't have the option to go with ordertype wise settings
-ashok

Similar Messages

T-Code for changing the default Exchange Rate reference for creating PO?

Dear All,
Can somebody kindly give me the T-Code for changing the default
Exchange Rate reference for creating PO? Is there a Step by Step
procedure before changing the default exchange rate?
Thank you in advance.
Regards,
Gopesh

Hi
There is not such Tcode to change the default exchange rate from the PO.
If you want you can confugure the exchange rate in the following path in the IMG,
SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
Hope it helps you.
Cheers
Umakanth

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

How to change the default BC image that shows in the address bar?

Does anyone know how to change the default BC image that shows in the address bar? I want to swap it out so the client logo shows next to their URL.
Thank you!

Hi,
If you are trying to change the favicon for your site,
You can do it from Site Manager-> Page template -> Default Template
Look for the code <link type="image/x-icon" href="/Path for your image" rel="icon" />, and Click save.
Now where you will use this template, it will display your favicon for that webpage instead of BC favicon. You can define it on Page directly if you are not going to use template.
Please let me know if you have any doubt.

I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Help please

I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Does anyone have the same problem or know how to fix it?

In Lion the Finder folder is now invisible. To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion for the first time or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an applicaiton.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
OT

How do I change the default "date range" when searching in the forums?

Hi all,
New to the SAP forums... How do I change the default date range when searching in the forums? I am getting a 90 day search by default. Then I have to change it and search again. Argh!
Thanks,
--Amy Smith

Hi Amy,
the default date range cannot be changed by users. It is defined system-wide.
Regards,
Michael

How to remove the default members of a dimension from the control table?

Hi all,
I am new to hyperion FDM 11.1.1.2.0.0 .
When I navigate to Metadata>Control Tables and try to delete the default memmbers
for the dimension like category and period i got the following error.
Error: Period( 8/31/2009 ) is an active Global or Local Period and cannot be deleted.
Then again i unchecked active checkbox for that dimension from Hyperion Essbase Integration Setup of Workbench Client.
After doing that i got the following error
Error: Unable to retrieve target System Data.
Can anyone tell me how to remove the default members of a dimension from the control table?
Thanks

Create a new record for the table.
Go change the POV to the new record.
Return to the control table and delete the default record.

GL assignment to the new movement type copied from101(GR of purchase order)

Dear friends,
user need another movement type copied from 101 due to diffierent GL assignment needed for the new movement type.
while below is the only combination for PRD(cost (price) diffierences) is OBYC. and the first row is the current GL assignment for 101.
My question is : How do I assign diffierent GL for the newly copied movement type ,say Z01.
General modification       Debit          Credit
                                     530000       530000
PRA                              530050       530050
PRF                               530000       530000
Thanks in advance,
Linda

Hi,
Go to t code OMJJ and locate your movement type Z01. Then go to Account Grouping on the left pane and create a new account modifier there. Then give the same account modifier in OBYC settings and assign the GL account against it.
Thanks,
Atal

Post the planned profit-related flows before creating the closing report.

Hi all,
I would need some assistance in the posting of bonds scheduled nominal interest.
Currently I have been able to configure the system to post the accrual of interest but not the recognition of interest revenue upon coupon date. I have encounter this warning message asking me to post the planned profit-related flows before creating the closing report.
I thought the processing of the nominal interest earned will be very much similar to Fixed Deposits, but it seems like under the cash flow tab, none of the nominal interest flows have been created.
Wonder if anyone has the experience in this area for bonds accounting and can point me to the correct transaction code to post the earned nominal interest for bonds.
Many thanks.
Bryan Goh

Hi,
I had the same problem and found the following workaround: apart from overriding MFMailComposeViewController's shouldAutorotateToInterfaceOrientation, I also added implementations for
_preferredInterfaceOrientationGivenCurrentOrientation
and
_isSupportedInterfaceOrientation
in a category of UIViewController in the native code.
Then, in the Actionscript code, added an event listener for StageOrientationEvent.ORIENTATION_CHANGING (with high priority and use_capture = true) in Actionscript to prevent resizing of the stage, which can occur even if the orientation doesn’t change.
This fixed it for me, but, as it messes with UIViewController, it makes it tricky to have views which have different orientation behaviour (if you want one view to be able to rotate in all directions, but others only to support Landscape, for example).
I've posted details and example code here: http://blog.diadraw.com/native-extensions-for-mobile-air-apps-getting-round-the-orientatio n-issue/

I cannot play the m4v movie (Linear) I downloaded with the U2 album "No line on the horizon". I have the latest versions of itunes and quicktime. I have a windows 7 computer. Can you help.

I cannot play the m4v movie (Linear) I downloaded with the U2 album "No line on the horizon". I have the latest versions of itunes and quicktime. I have a windows 7 computer. Can you help.

Hi whatisitagain,
Thank you for participating in the Apple Support Communities.
If the movie you downloaded from the iTunes Store is not playing in iTunes for Windows, start with the troubleshooting tips in this article:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues - Apple Support
All the best,
Jeremy

HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

Cannot set the default value of an item in the detailed table

Hi,
I have Master-Detail group, both are Table formats.
I need to set the default value of an item in the details row to the value of an item in the selected row in the Master table.
I tried Default Display Value=#{row.MasterItem}, but it seems it is trying to access current details row instead of the Master.
I tried #{bindings.MasterGroupColumnName.inputValue}, but it does not work.
Any ideas
Thanks in advance
Mohamed

I think I now what I'm doing differently, I had the "New Rows" JHS property of the detailed table group "empty" instead of the default "2" value.
It seems that "Default Display Value" expression works only for the new records specified in the "New Rows" property. But when I try to "Add" new record using the "Add Row" button, the new record inserted does not have the default values generated, only has values populated for the items of the FK (in the view link) but not the ones set through the property.
I guess in a nutshell, how I can get the details item to behave like the FK columns?
Thanks much
Mohamed

I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

Hi,
Did you find a way to solve your problem ? We have exactly the same for one application and we are using the same version of HFM : 11.1.2.1.
This problem is only about webforms. We can correctly input data through Data Grids or Client 32.
Thank you in advance for your answer.

HT3275 Time machine couldn't complete the backup. an error occured while creating the backup folder

Time machine couldn't complete the backup. an error occured while creating the backup folder Why does this happen?

hello,
http://pondini.org/TM/C10.html
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.

WHAT IS THE DEFAULT LOG IN AND PSWD FOR THE ROUTER?

WHAT IS THE DEFAULT LOG IN AND PSWD FOR THE ROUTER?

It's right here in the forum: http://customer.comcast.com/help-and-support/internet/wireless-gateway-username-and-password/

Change the default movement in reversation during creating the PM ORDER

Similar Messages

Maybe you are looking for