Change the point: 3.388443E-4 -- 0,0003388

how can I change the point?
I�ve got the following method to calculate 10^(-3,46)
public double AP1 (double S1)
double s = 123 - S1;
int f = 5;
double c = ((s/20) - (92.4/20) - f);
double base = 10;
double distanz = Math.pow(base, c);
System.out.println(s + " " + c);
return distanz;
the output is 3.3884415613920273E-4
but do I have to change that the output is without E-4 like 0,000338844156
??

Y'know, with Ariana_SpoiledBrat efficiently sucking up all the available Java talent to work on her Critical Problem, it's kind of refreshing to see someone asking a reasonable straightforward question, even one that's been asked before.
Look up the DecimalFormat class in java.text

Similar Messages

How can I change the points I got this year buying at Ishops?

How can I change the points I got this year buying at Ishops?

Use G Toolbox => Shell => Taskbar, you can set Taskbar to Auto Hide, Always on top, or both.
Reqire XP.
G Toolbox => Shell =>Hide SysCtrls can return taskbar handle.
Message Edited by zou on 10-23-2006 01:40 PM
George Zou
http://webspace.webring.com/people/og/gtoolbox

How do I change the pointer and workspace size in InDesign?

I installed the new 2014 version of InDesign and now my workspace and pointer are huge but the document is normal size. See pics that show difference from previous version to new. It is kind of hard to see the difference in these pics, but there is a huge difference and very annoying because the workspace is taking up so much of my screen and giving me less area to work in...

Change the font size in the O/S to 124% or less

How to change the point size in a plot.

I want to set the point size in an XY plot to be proportional to the amplitude. So, when the amplitude is small, the point on the plot should be small and when the amplitude is large, the point on the plot should be large

> I want to set the point size in an XY plot to be proportional to the
> amplitude. So, when the amplitude is small, the point on the plot
> should be small and when the amplitude is large, the point on the plot
> should be large
The other post points out that the point size applies to all points in a
plot, and it has only a few possible sizes.
The better solution is probably to look at the picture example for XY
graphs. You can then open up the diagram and look at the source code
for it. You will find a loop that draws for each point. You might also
want to look at the scatter plot example.
Greg McKaskle

.pdf changes the point size of type

By state law, we have to produce legal documents in 13-point type. When we convert a 13-point WordPerfect document into .pdf, the point size ends up reduced to about 12-point. What do we do? I can't find any way to tell Adobe to make the point size 13 point.

How do you convert?

How can i change the pointer on osx mountain lion

Ever since I installed mountain my pointer is in a BOX. How do I change that?

Try Zoom options in System Preferences > Accessibility > Show preview rectangle when zoomed out.

How do I change the font size of a data point label on a cfchart?

I know I can control the x axis and y axis font with the font="" attribute of the cfchart tag. But I want to change the font size of the data label in the chart series. Is that possible?

To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
- Dov

Changing the x-axis crossing point on a log y-axis

Is it possible to change the point at which the x-axis crossing a log y-axis?
I'd like the origin to be 0.1, not 1, and I'm losing hours of my life trying to work out how to do it.
Hopefully it will be something easy that I have missed...
...I'd rather look foolish than buy Microsoft office.

I have another idea for you.
1) Multiply all of your numbers by 10 or whatever factor of 10 (i.e., 100 , 1000, etc.) is necessary so that none of them are smaller than 1.
2) Take the LOG of those new numbers.
3) Plot the result of (2) using a linear Y axis. Get your chart looking like you want it with the min, max, and number of Y axis gridlines you want. Each number on the Y axis needs to be an integer, no decimals.
4) Choose a custom format for the Y axis numbers. Delete the format that is there and add a new format for each of the numbers on the axis. For example, lets say you multiplied by 100 in the first step above. The gridline with the number "0" should really be "0.01" so make a format for "if value is 0" and type in 0.01 as the format. Repeat for the other numbers (1 becomes 0.1, 2 becomes 1, 3 becomes 10 ,etc).
Again, kind of a pain. I think I like this solution better, though. The chart looks better in the end and you can do multiple data series on the same chart.

How do I change the font size of a document when I PRINT?

How to I change the font size of a document when I print it?

To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
- Dov

How to change the Data Base Relation in a universe?

We are working with BO 6.5a.One universe in connected to a 'DB2/400 (iSeries)' data base.
All Objects in a universe are related to a defined library like <libraryname>.<tablename>.<fieldname>.
We like to change the libraryname. Is there any chance to do this in the existing universe?
Why?
We like to have the same database two times in our System, only the data are different.
Details:
The universe of course points to a library (A) and connection is done with ODBC.
Changing ODBC to another library (B) is no problem; and, of course we then can change the tables in the universe manually => a lot of work.
But we like to change the pointer in the universe at once (each object shows to the library (A) and we want them to show at (B)).
The 'refresh structure' - button won't do it.

In the universe you can select all the tables Ctrl-A, right click and rename tables. Remove the reference to the library.

How to change the cursor

I somehow changed the pointer / cursor in bridge from an arrow to a small magnifying glass... when i position the cursor / pointer on a picture in the PREVIEW panel in bridge and press on the left mouse key, the cursor is a small magnifying glass that opens a small window that magnifys whatever portion of the screen it is on.... i DO NOT know how i changed it and CANT find out how to change it back to a POINTER ARROW.... please help...thanks...dave

Have you got a sticking space bar?
Try tapping it a few times.

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

I can't change the color of an object past a certain point, it returns to original color

Two problems/questions: Opening a file in photoshop cs4 today I noticed that all my folders were labeled as "pass through" (first time seeing this) and when I click the color icon box of an object in the layer pallete, it will not change the color past a certain point. To clarify, I have previously made an object or layer using the pen tool and filled it with a certain purple. Now I want to go back and make it a brighter purple. So I double click the color fill thumbnail in the layer and the color selection window pops up. I click the top right color of the area (which happens to be the brightest color) and press ok, but my object stays as the original color I had made it before. What is the reason for this?
Eric

»Pass Through« indicates that Adjustment Layers will affect lower Layers outside the Group and that contained Layers with different Blend Modes will affect Blending with underlying Layers outside the Group accordingly.
If you change it to Normal or any of the other Blend Modes everything contained within the Group will basically act as one flattened Layer and Adjustments only affect the Group’s pixel content.
Could you post a screenshot of the document with the Solid Color Layer’s Color Picker and the Layers Panel visible?

WSUS vs SCCM SUP - What is the point of changing? Pros and Cons of both

Hi,
I have been using WSUS forever and have just made a very painful change over to SCCM 2012 SUP. In a room full of experienced WSUS users and facing a handover of SCCM SUP, I really need to have this question answered - What, if any, are the advantages of
SCCM2012 SUP over WSUS. It's certainly not ease of use, ease of implementation or understandability.
Even if i accept that yes, they are two different things now and i shouldn't think of SCCM as being like WSUS, I still have to compare and contrast, honestly, what they do and how they do it
WSUS is ridiculously easy in comparison to SUP. With WSUS, I install it, create some GPOs and assign to OUs. I create security groups and add the servers in scope to to thoise groups and those security groups to the policy. I have different groups set up
to keep separation of DCs and APP servers and SQL and SCCM and Antivirus servers and workstations
If needs be i have a text list of all my servers/workstations and can individually target using PSEXEC to run wuauclt on any number of clients. It works great and is easily understandable
Now, enter SCCM 2010 and SUP.
The first thing i HAD to know was the last thing i learned. And not from Microsoft.That is that there is really only one method now, imposed by limitations on Software Update Groups and Deployment packages. You can only create a package of 1000 or less updates
This means chopping up your historic updates and having them deployed as a separate strategy from your newer updates cycles
Secondly, every month from now on you will need to create and sort your updates into a meaningful Update Group and Deployment package - even if you set up an Automatic Deployment rule, you still need to manually create your Update Groups
You can only have one deployment package per update group and will need one software update group per "type" of install (available or Required) AND you will need one software update group and deployment package PER COLLECTION!
To make this work as simply as possible, it will mean having two collections Available and Required (for example)
Each collection will have a SUG associated with it (each with a limit of 1000 updates remember). Each group of circa 1000 updates takes about 2+ hours to compile and you will have a minimum of 5 groups per collection to get up to October 2014
After this your ADRs should now do it all for you but lack the ability to create update groups so you have to do this manually every month beforehand. Whew!!
Thirdly, in the background, WSUS still downloads metadata. In SCCM you should be pointing every update group manually to this folder. Same with Deployment packages and ADRs. Why is this not built-in - intuitive? These are then copied and downloaded as full
packages into their respectively (manually) created source folders
Now, when updates expire or are superseded, you have to manually replace them from each SUG
And also quite a big thing i havent heard anyone else comment on, is the fact that these updates are now NOT shown in the Windows Update feature - they now appear in the Software Center - so now the Servers i sent "Available" updates have to be
logged onto and manually installed - instead of being able to individually target them like i did with PSEXEC and wuauclt
And logging?? There are at least 100 different logs to look at using the Trace Log Tool. It's a full time job just figuring out what logs to look at to resolve any problems
This is, in my opinion, a really poor effort and the documentaion is wildly inconsistent across many forums.
Some kind of standard document is needed. And i say this after having followed Microsoft's own documentation and using technet forums
I, for one, just need one BIG question answered for now - how do i remove the SCCM SUP client and revert back to wuauclt on all my clients - if i remove SUP from SCCM will it remove the client from the clients?

HI Jason,
I have spent a long time trying to get this to work. My requirements are to have WSUS deploy updates automatically with as little intervention as possible and to be able to explain and show the process to others who will administer the system long after
I've gone
The reason I still have to think of things in the WSUS way is that I have a broken update infrastructure that doesn't do what my requirements are. So I now currently need to log into all my "Available " Servers to update them manually instead of
being able to remotely execute the updates. I'll look at the SDK but this is the first time I've heard of it
From the top - yes I agree that's a typo it's Update Goups that can only have 1000 updates. Do you agree that this causes a problem for this scenario? Updates since before 2013 amount to several thousand and so I have to break these up into groups of 1000
- one each for Available and Required groups. That means 8 groups straight away
Having to cater for these historic updates means painfully waiting 2 hours or so for each package to be created. I've done this already and its not pretty but its essential (unless I'm doing it wrong but I am following TechNet forums)
My ADRs will absolutely not create the Update Groups and the docs I have read also say that this is a manual monthly process - Create a Group every month and then use an ADR to use that group - is that not correct?
Update groups - you are mixing my words up and saying the same thing in a different way - "Update groups can absolutely have multiple deployments targeted to different collections" change the "can" for a "must" and you see my
problem. You cannot create a single Update Group, package it up and the deploy it to both Available and Required groups. You need two update groups for this. One for available and one for Required.
Metadata - OK then what is it that WSUS downloads to E:\WSUS\WsusContent\... ? And why is this to be set as the download location for any Update Group, Deployment Package or ADR?? I have to create or select a deployment package which is another
manually created folder under "sources" for which the download location is set to my WSUS folder. This doesn't work unless I set my download location to Microsoft. But WSUS should already have synced in the background to WsusContent so why would
I want to download from Microsoft. And I only want to actually download the "approved" packages. So as far as I'm aware the WSUS\WsusContent folder only contains metadata which is not downloaded until required. Am I wrong? What/who/how downloads
the binaries and when?
Lastly, What doesn't make sense? The goal used to be automation. If and when I needed to, I used to be able to manually intervene for single or multiple devices using PSEXEC to run wuauclt. With SCCM I can see for example, 2x non compliant devices just now.
In the old days I would just psexec onto them and run wuauclt. In SCCM I err... Hmmm.. what? What do I do? Will look at the SDK
Just one other thing - is there no way at all to continue to use the Windows UPdate control panel and have it show the same available updates as Software Centre? Why can SCCM not just work like Windows Update does? If I run Windows Update on any server it
says up do date but if go to Microsoft to check it always comes back with updates
I just want my internal SCCM SUP to work the same way Microsoft updates works for an internet connected computer. Completely Automatic. No intervention. My group of Availabel servers I would like to be able to remotely and individually install from either
a central console or a script. Again, I will look at the SDK for this
Thanks for your reply and advice. I'll give it one more week. ;-)

In a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Change the point: 3.388443E-4 -- 0,0003388

Similar Messages

Maybe you are looking for