Change timezone from command

how to change timezone from command in windows server 2008
Sudhir

Hi,
1. Open an elevated "Command Prompt".
2. Now provide any of following commands:
tzutil /g (To know current time zone)
tzutil /l (To get a list of all available time zones)
tzutil /s time_zone_ID (To change time zone)
Fox example, if you want to set the time zone to "Pacific Standard Time", then the command would be:
tzutil /s "Pacific Standard Time"
Best regards,
Vincent Hu

Similar Messages

How to Change TimeZones from Personalize iView

Hi All,
In my Masthead, i need to Display the Country name and the Time, user is going to chnage the time zone and Country from Personalize iview User Profile, according to that the respective time is going to display it on Masthead part.
Now my Question, If user is Change the Timezone & Country in the User profile, how it is going to reflect on Masthead area.
Thanks In Advance
Krishna Ganesh

Hi Michael,
In the Masthead JSP it self, we are adding jsp scriptlets and html Div Elements to display the time on the Masthead. Currently i am able to display the server time with normal Java API.
Now i am going to display 5 timezones in a Iview, that iview is going to add to user's HomePage(User Choice).
Thanks
Ganesh

Changing mailallowedserviceaccess from command line

Is posibly to change the atribute mailallowedserviceaccess for an user using some kind of command line like configutil?
Thanks a lot,
Andr�s.

That was wrong, i must use(the documentation i think is not right):
/opt/SUNWcomm/bin/commadmin user modify -D administrator -w admin_password -n domain.com
-l user mailAllowedServiceAccess:+imap:ALL$+pop:ALL$+smtp:ALL$
The user won't be able to use the webmail but able to use imap, smtp and pop.
Greetings,
Andr�s.

What key(s) do i type to change language from english to other? i am writing s story in dual languages. i was told to click command and space bar together but it is not working.

what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.

Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language.

Can I change user name after running essbase from command prompt??

Hi,
I run essbase from command prompt and during this activity I was asked to give user name and password, but by mistake I put wrong user name and now wolud like to chanege it.
Is it possible??
cheers,

It worked,
now I was able to connect to easbase from planning, I ve created sample aplication and initialize it but cannot connect to Eas to download data for sample application. After I run the validation there is now only one error displayed:
Essbase / Essbase Administration Services
FAILED Web App Availability of web application context (POL-MPIKULSKI 10080, eas)
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code: 404
Recommended Action: Check application is started
I tried to start the eas from start>programs>epm system>essbase>administration services>start administration services(java embeded) but it didnt help.
can I start in in different way??
cheers,

Unable to run discoverer report from command prompt

Hi,
I'm trying to run the discoverer report from command prompt and i need to schedule the same.
How could i pass multiple values for the parameters?
If i don't pass the optional parameters, the parameter screen is getting pop-up? How to skip optional parameters?
Also, how to pass the data ranges (format for date parameters) ?
I'm using the below command in command prompt:
cd/d E:\oracle\BIToolsHome_1\bin
dis51usr /connect username/password@database /opendb "TIMS-PCJ status Report" /sheet "TIMS observation status report (based on performed date)" /parameter "Test Number" 40351 /parameter "From Date" "01-JAN-2007" /parameter "To Date" "28-FEB-2007" /parameter "Observation Status" C /parameter "Observation Name" "Abdominal Girth" /export HTML "C:\DISCOVERER_REPORT_SCHEDULING\DIS_OUTPUT\PCJStatusOutput11"
Any one please reply me. Its very urgent.
Regards,
Sreedhar

Hi,
How could i pass multiple values for the parameters? You should be able to use a comma separated list e.g.
/parameter "Observation Name" "'Abdominal Girth','Abdominal Girth2'"
How to skip optional parameters?I don't think you can. You have to supply all parameters and then decode out the parameters you don't need in the workbook.
how to pass the data ranges You cannot pass a date range. You can pass a start and end parameters. The default format for the date parameters is DD-MON-YYYY but this can change depending on the NLS settings and format of the data item.
Rod West

Call an ABAP program or a function module from command prompt/python script

Dear All,
I want to call a function module/ABAP program from command prompt or a python script.
Let me explain with an example.
There is a function module "z_add" that takes two integers as input parameters and generates their sum.
the sum is the output parameter.
Now i want to call this function module from command prompt / python script and pass parameters to this function module.
In return i must get the sum(i.e. the output of function module).
I tried using STARTRFC ,was able to call the FM but could not get the return value(output) from FM.
Can you please provide me the code of such a function module and the method to call it thereby passing parameters and getting the sum.
Thanks and regards,
Gaurav
Edited by: gauravkec2005 on Mar 4, 2010 7:41 AM

thank you both! helpful answers! :o)
anyway!
i have written the program which is called from the SAPScript:
    /:       PERFORM GET_VATNUMBER IN PROGRAM ZFI_F140_OPERATIONS
    /:       USING &BKPF-BUKRS&
    /:       CHANGING &VATNUMBER&
    CE       VAT Registration No : &VATNUMBER&
    REPORT zfi_f140_operations.
    FORM get_vatnumber TABLES in_par STRUCTURE itcsy
                              out_par STRUCTURE itcsy.
      DATA: lv_co_code TYPE bukrs,
            lv_vat_no TYPE stceg.
      READ TABLE in_par WITH KEY name = 'BKPF-BUKRS'.
      MOVE in_par-value TO lv_co_code.
      SELECT SINGLE stceg FROM t001
        INTO lv_vat_no WHERE bukrs = lv_co_code.
      out_par-name = 'VATNUMBER'.
      WRITE lv_vat_no TO out_par-value.
      CONDENSE out_par-value.
      MODIFY out_par INDEX 1.
    ENDFORM.
it is not working and i cannot work out why...
i have not been ABAPing for very long but have had a go....
any thoughts as to what i have done wrong?
or point me where i should be looking? thank you!

Why not all jars picked up by ojdeloy and how to generate build.xml from command line and not JDEV GUI - quick question

Hi All
We have 11.1.1.7 ojdeploy to compile our app.
We notice in the log that not all jars are used in classpath arguments when we explicitly set them up for compilation.
eg:
<path id="classpath">
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/a.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/b.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/c.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/d.jar"/>
</path>
Log Output -
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/bin/javac
[ora:ojdeploy] -g
[ora:ojdeploy] -Xlint:all
[ora:ojdeploy] -Xlint:-cast
[ora:ojdeploy] -Xlint:-empty
[ora:ojdeploy] -Xlint:-fallthrough
[ora:ojdeploy] -Xlint:-path
[ora:ojdeploy] -Xlint:-serial
[ora:ojdeploy] -Xlint:-unchecked
[ora:ojdeploy] -source 1.6
[ora:ojdeploy] -target 1.6
[ora:ojdeploy] -verbose
[ora:ojdeploy] -encoding Cp1252
[ora:ojdeploy] -classpath
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/resources.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/rt.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/jsse.jar:
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/a.jar"/>
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/c.jar"/>
1- Is it because it depends on how jpr or jws are configured ?
2- How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?

The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49)

Not able to start managed server from command prompt

Hi,
I am trying to start manged server from command prompt. The command i am using is as follows:
startManagedWebLogic.cmd MS1 [http://]<Listen_Address>:<Admin_port>
Where MS1 is the name of my managed server.
But i am getting following exceptions:
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on C:\bea\user_pr
ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
lready be running
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
va:159)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
va:58)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirec
toryService.java:73)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
ager.java:459)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
icesManager.java:164)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
at weblogic.Server.main(Server.java:67)
>
<Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FAILED>
<Feb 10, 2009 6:48:16 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical
service failed. The server will shut itself down>
<Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FORCE_SHUTTING_DOWN>
Please help me to resolve this issue.
thanks,
Sonal
Edited by: [email protected] on Feb 10, 2009 5:16 AM

Looking at your error message a little closer, I don't believe it has anything to do with port conflicts but rather that even though you are executing the startManagedWeblogic.cmd with your managed server name (MS1), the error indicates that it is trying to start the Admin Server (not MS1). Note in your error message the following: Unable to obtain lock on C:\bea\user_pr
ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
lready be running
It is saying that it cannot start the Admin Server because it is already running (which is probably true in your case). Have you made any changes to the startManagedWeblogic.cmd or the startWeblogic.cmd scripts? I would start debugging there and try to figure out why the script is trying to start your admin server instead of MS1 as you requested on the cmd line.

Use variables in a SELECT INTO FROM command

Hi,
How do I use variables within a select into from command? I want to loop through SYS.DBA_TABLES using a cursor and count the number of rows in a
selection of tables an then insert into a cardinality table.
The count of rows will be stored in a variable called CNT, that bit is easy however I need a variable in the FROM clause because that
value changes with every iteration of the cursor.
e.g.
CNT := 0;
TN := "MyTable";
select count(*) into CNT FROM TN;
insert into cardinality (table_name, row_count) values (TN, CNT);
This is Oracle 9i and I need the row counts in a separate table as they are shipped over to a different environment for analysis purposes.
Any ideas?
Regards
Dave
Edited by: Yorky001 on Sep 15, 2010 10:32 AM

Hi,
Thanks for the info, unfortunately I can get neither example to work on this 9i system, could well be pilot error as I only ever get
to do any Oracle about once per year. In the first query I have tried both "user_tables" and SYS.DBA_TABLES, same result.
set serveroutput on size 1000000;
DECLARE
row_count INTEGER;
vstr VARCHAR2(500);
vstr1 VARCHAR2(500);
BEGIN
vstr := 'SELECT count(*) FROM ';
dbms_output.put_line(vstr);
FOR i IN (SELECT table_name FROM user_tables WHERE rownum < 10) LOOP
vstr1 := vstr || i.table_name;
EXECUTE IMMEDIATE vstr1
INTO row_count;
dbms_output.put_line(i.table_name || ':' || row_count);
END LOOP;
END;
This one complains about the execute immediate line.
Error report:
ORA-00933: SQL command not properly ended
ORA-06512: at line 12
00933. 00000 - "SQL command not properly ended"
*Cause:
*Action:
BEGIN
FOR i IN (select
table_name,
to_number(
extractvalue(
xmltype(
dbms_xmlgen.getxml('select count(*) c from '||table_name))
,'/ROWSET/ROW/C')) count
from user_tables
where rownum<6) LOOP
dbms_output.put_line(i.table_name || ':' || i.count);
END LOOP;
END;
ORA-19206: Invalid value for query or REF CURSOR parameter
ORA-06512: at "SYS.DBMS_XMLGEN", line 121
ORA-06512: at line 1
ORA-06512: at line 2
19206. 00000 - "Invalid value for query or REF CURSOR parameter"
*Cause:    The queryString argument passed to DBMS_XMLGEN.newContext was not a valid query, or REF CURSOR.
*Action:   Rewrite the query so that the queryString argument is a valid query or REF CURSOR.

Change archive from time 'sysdate-8' crosscheck;

change archive from time 'sysdate-8' crosscheck;
What does this statement do

I am not sure, but I think that if you have reincarnate your database to your previous backup and uptill some previous archivelog, and the RMAN catalog is pointing to the latest archivelog, so the above command may be used to resync RMAN catalog with your reincarnated database.
I would love to get corrected.
Thanks.

Selecting different homes from command prompt

Hi Gurus,
Oracle client-9201
Oracle client-10201
Win XP SP2
We have two oracle homes. We want to switch it from one to another. We have restriction that this should be done from command prompt only. Although I can change homes launching latest OUI and going to "INSTALLED PRODUCTS" tab where we find ENVIRONMENT tab. There it is possible to change home and apply. But this thing I want to do from command prompt.
Any help will be highly appreciated.
Regards.
Virendra

No, you don't want it to be from a command prompt and from OUI. What you want is to be able to do this without the need to visit all 400 client boxes. The method is irrelevant, as long as it efficiently achieves your real goal.That is true.
You keep saying "command prompt" and "OUI", but can't visit all the necessary machines. So what were you envisioning? Creating some batch file you could distribute to all affected users over the network, and ask them to execute said batch file? That may (or may not) be valid, but to find the best solution we have to clearly define the real requirements and separate that from any pre-concieved solution.You can say it is my pre-concieved assumption that I will go with Command Prompt/OUI. But the real problem is I don't want to visit all machines. It can be a batch file distributed to all machines or our network people may execute it sitting on domain controller machine from which he can run programs in background of any machine in network.
From the other things discussed on this thread, I suspect you are going to have to blow in some registry hack, by one of several possible means. But first we have to know what your real constraints are and all of the options open to you.Real constraint is, We don't want (rather can't) visit all 400 terminals.
Do you have the ability to push registry settings at client logon?Yes, We can.
Can you guarantee the consistency of configuration of all 400 clients?Home name and Location may be different on different machines.
Do you have the ability to force the automatic execution of a command file from a file server and client log-on time?Yes, it is possible.
Are you working with your network people to explore what help they might be able to provide on the above points?They may help us depending upon the requirement.
Regards
Virendra

How to delete unwanted timezones from Calendar app on Yosemite?

I upgraded to Yosemite and one of the problems I had with Calendar App had something to do with Time Zone.
I realized that Calendar added California time as default. So now I want to delete the unwanted time zone, but cannot find a way to do so.
How does one remove or uncheck a time zone in iCal (Mountain Lion)?
I found this forum and tried, but as the last person who posted said, it doesn't work on Yosemite.
Does anyone know to delete unwanted timezones from Calendar App on Yosemite?
Thanks.

Thank you for your response.
However, I am not asking about how to change the timezone on Mac. I'm asking about how to delete unwanted timezones on Calendar app.
Here I have 2 Pacific Time's. They are basically the same, but sometimes my computer choses one of the other without my intention. And when it does, it keeps showing (PST) on next to the starting time which I do not want. In order to avoid that, I'd like to delete "Pacific Time (America/Los_Angeles)". From the link you provided, I'm not finding the solution to this. I might be looking at a wrong spot and if so please be patient to guide me through.
If my question still doesn't make sense, please click the link to the solution for the same problem on Mountain Lion in my original question. You might understand my question better from it.
Thank you.

How to automatically generate a build file of the application from command-line

Hi All
How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?
Thanks

User, which jdev version do you use?
I don't think you can do this. You can only create an ant build.xml from the project inside jdev.
You can use ojdeploy to build the project. This is the only method which will also make the necessary changes to the descriptors.
Timo

Create domain from command line failed in wls91

Hi,
I am trying to create a simple domain from command line for wls91. It even didn't ask me the password. How can I do it? Thanks
C:\testdomain>java weblogic.Server
<Feb 23, 2006 9:11:50 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with BEA JRockit(R) Version R26.0.0-189-53463-1.5.0_04-20051122-204
1-win-ia32 from BEA Systems, Inc.>
C:\testdomain\config\config.xml not found
No config.xml was found.
Would you like the server to create a default configuration and boot? (y/n): y
<Feb 23, 2006 9:11:56 AM PST> <Info> <Management> <BEA-140013> <C:\testdomain\.\
config\config.xml not found>
<Feb 23, 2006 9:11:56 AM PST> <Info> <Security> <BEA-090065> <Getting boot ident
ity from user.>
Enter username to boot WebLogic server:weblogic
<Feb 23, 2006 9:12:00 AM PST> <Error> <Security> <BEA-090782> <Server is Running
in Production Mode and Native Library(terminalio) to read the password securely
from commandline is not found.>
<Feb 23, 2006 9:12:00 AM PST> <Notice> <WebLogicServer> <BEA-000388> <JVM called
WLS shutdown hook. The server will force shutdown now>
<Feb 23, 2006 9:12:00 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FORCE_SHUTTING_DOWN>
C:\testdomain>

Hi,
If you are still having problems creating a domain from the command line, the official solution would be to use
{proper_path}/bea/weblogic{proper_version}/common/bin/config.sh -mode=console
This will guide you to the same steps as the visual version of the wizard, but using the command prompt.
If you are using windows, the same works but with the command config.cmd, and mutatis mutandis.
Regards,
LG

Change timezone from command

Similar Messages

Maybe you are looking for